연삭 기계 사용 판매를 위해 (2,186)

grinding diameter: 515 mmgrinding length: 3000 mmcentre height: 250 mmturning speed range: 11,2 - 355 U/minquill stroke: 40 mmmorse taper: 5 rapid adjustment: 70 mmspindle turning speed range: 1080 - 1860 U/minworkpiece weight: max. 500 kgtable speeds: 0,05 - 5 m/mintotal power requirement: 17 kWweight of the machine ca.: 9 tdimensions of the machine ca.: 8,0 x 3,0 x 2,6 mUniversal external cylindrical grinding machine- coolant tank & magnetic filter- feed with adjustable stop- tailstock with air bearings- workpiece spindle- various steady restsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

수량: 1 STK-> 80120.14318-> m= 1 - 3 / EW 25 페슬러에서 제작된 다양한 다이아몬드 드레싱 휠이 제공됩니다. 적용: 연삭 휠 드레싱 / 정밀 가공 부품당 가격, 다중 구매 시 할인 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

rotary table diameter: 600 mmgrinding height: 600 mmgrinding head - power requirement: kWworkpiece weight: 300 kggrinding wheel diameter: 600 mmpower spindle motor: 15 kWgrinding height: 600 mmControl: SIEMENS STC weight of the machine ca.: 19 tdimensions of the machine ca.: 4,7 x 3,6 x 2,5 mEquipment & Accessories? Wet grinding unit with universal paper belt filter, discharge container and magneticseparator, tank capacity approx. 500 l? Electrical cabinet with digital drives SIMODRIVE 611D? Coolant Mist extractor? Recooling unit for grinding spindle motor? Fully closed machine enclosure? Central lubrication? Swivebale Control Panel with SIEMENS Simatic 10” Touch HMI mounted at front of themachine? Electro-permanent magnetic plate Ø 600 mm with 4mm pitch, absolute accuracy due tolack of heat, incl. Adhesion control (30-100%), autom. magnet pole switching via pushbutton. After switchi ...

To participate in the auction it is necessary to pay 10% of the starting price as a deposit. Ask the contact person by email to matteo.tosin@surplex.com for the bank details for the transfer. Caution: Contents on the machine are excluded Auction-ID: A7-43767-15

workpiece diameter: - mmgrinding depth: - mmclamping length: - mmtotal power requirement: - kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

To participate in the auction it is necessary to pay 10% of the starting price as a deposit. Ask the contact person by email to matteo.tosin@surplex.com for the bank details for the transfer. Caution: Contents on the machine are excluded Auction-ID: A7-43767-16

가공물 직경: - mm연삭 깊이: - mm클램핑 길이: - mm총 전력 요구량: - 기계 무게 약 kW 무게 ca.: 기계 tdimensions 약 m이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

내부 직경: - mmgrinding 깊이: - mmswing 직경: - mm제어: 총 전력 요구량: 기계 무게 kg. 무게 ca.: 기계 tdimensions ca.: m이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

내경: - mm연마 깊이: - mm스윙 직경: - mm총 전력 요구량: - 기계 kW 무게 ca.: 기계 tdimensions ca.: m이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

연마 직경 최대: MM 조절 휠 폭: MMMAX. 연삭기 폭: mm, 제어: SIEMENS 840D 총 전력 요구량: - 기계 kW 무게 ca.: - 기계 t치수 ca.: - m. 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

Ø 530 mm To participate in the auction it is necessary to pay 10% of the starting price as a deposit. Ask the contact person by email to matteo.tosin@surplex.com for the bank details for the transfer. Caution: Contents on the machine are excluded Auction-ID: A7-43767-12

To participate in the auction it is necessary to pay 10% of the starting price as a deposit. Ask the contact person by email to matteo.tosin@surplex.com for the bank details for the transfer. Caution: Contents on the machine are excluded Auction-ID: A7-43767-23

To participate in the auction it is necessary to pay 10% of the starting price as a deposit. Ask the contact person by email to matteo.tosin@surplex.com for the bank details for the transfer. Caution: Contents on the machine are excluded Auction-ID: A7-43767-43

To participate in the auction it is necessary to pay 10% of the starting price as a deposit. Ask the contact person by email to matteo.tosin@surplex.com for the bank details for the transfer. Caution: Contents on the machine are excluded LOCATION : VERMEZZO (MI) Auction-ID: A7-43767-56

grinding diameter: 850 mmgrinding length: 6000 mmcentre height: 425 mmgrinding wheel size: 750 x 100 x 305 mmtable - swivable: -2 / +2 Gradtable load capacity: 3000 kgchucking diameter: 315 mmgrinding head swivelling: 90 Gradspindle taper MT: 6 spindle speeds: 12 -300 mmgrinding head - power requirement: 22 kWControl: Siemens 840D grinding wheel head adjustable: +30 / -10 °total power requirement: 41 kWweight of the machine ca.: 22 tdimensions of the machine ca.: 16,0 x 4 x 2,1 m- Siemens Sinumerik 840D CNC control- SBS balance system- INTERNAL GRINDING DEVICE- 4 support steady rests- Tailstock- Coolant system- Electronic hand-held control panel- Ball screws X-Z- Pneumatic quill stroke- Paper belt filter device- Oil mist extraction device- Full protective coverThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 600 mmgrinding width: 200 mmworkpiece height: 250 mmtable surface area: 700 x 200 mmtable load: 250 kggrinding wheel size: 200 x 16-25 / 51 mmgrinding wheel speeds: 2800 U/minlongitudinal feed of the table: 1 - 20 mmwith vertical adjustment: 290 mmtotal power requirement: 1,5 kWweight: 1300 kgrange L-W-H: 1,6 x 1,2 x 1,9 mmpartly overhauled in 2022 - (Control panel still need to be electrically completed!)- magnetic clamping plate 510 x 200mm- autom. cross feed- Hydraulic table movement, infinitely variable- Manual fine adjustment (0,01 / 0,005mm)- Grinding wheel extractor- Central lubrication- VENTI Dust-Suction- 5 grinding wheelsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

To participate in the auction it is necessary to pay 10% of the starting price as a deposit. Ask the contact person by email to matteo.tosin@surplex.com for the bank details for the transfer. Caution: Contents on the machine are excluded Auction-ID: A7-43767-27

To participate in the auction it is necessary to pay 10% of the starting price as a deposit. Ask the contact person by email to matteo.tosin@surplex.com for the bank details for the transfer. Caution: Contents on the machine are excluded Auction-ID: A7-43767-24

연삭기 최대 직경: 200 mm 연삭 휠 폭: 25 mm 회전 속도: 3,000 U/min 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

To participate in the auction it is necessary to pay 10% of the starting price as a deposit. Ask the contact person by email to matteo.tosin@surplex.com for the bank details for the transfer. Caution: Contents on the machine are excluded Auction-ID: A7-43767-19

내부 직경: - mmgrinding 깊이: - mmswing 직경: - mm: 220mm: ja 총 전력 요구량: - kW 기계 무게 약 1.4 tdimension ca.: - m이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

For spare parts; To participate in the auction it is necessary to pay 10% of the starting price as a deposit. Ask the contact person by email to matteo.tosin@surplex.com for the bank details for the transfer. Caution: Contents on the machine are excluded Auction-ID: A7-43767-14

To participate in the auction it is necessary to pay 10% of the starting price as a deposit. Ask the contact person by email to matteo.tosin@surplex.com for the bank details for the transfer. Caution: Contents on the machine are excluded LOCATION : VERMEZZO (MI) Auction-ID: A7-43767-57

grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 175 mmgrinding wheel diameter: 400 mmgrinding wheel width: 50 mmbore: 127 mm: MK5 work piece spindle speed: 20-400 U/minworkpiece spindle - bore: mmgrinding head swivelling: 360 °grinding spindle head - swivable: 180 + - °grinding spindle speed: 1500,1700,2200 U/min: 0,001-0,030 mm/Ø: 0-0,95 mm/Ø: ±8 °longitudinal feed of the table: 1300 mmtable speeds: 0,02-6 m/min: 130 kg: 130 inkl. Spannugkg kg: mmgrinding depth: mm: 70 mmtotal power requirement: 6,5 kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 4,2 x 2,0 mNeu geliefert an Universität. 2018 übernommen.Dann komplett bei BEMA gewartet und an an Einmannbetrieb geliefert.Nun wird die Maschine nochmal gewartet und Tischgeometrie neu hergestellt.2-Achsen-Digitalanzeige Fagor nachgerüstet.-Reitstock mit Feinverstellung-Innenschleifeinrichtung-Kühl ...

To participate in the auction it is necessary to pay 10% of the starting price as a deposit. Ask the contact person by email to matteo.tosin@surplex.com for the bank details for the transfer. Caution: Contents on the machine are excluded LOCATION : VERMEZZO (MI) Auction-ID: A7-43767-65

To participate in the auction it is necessary to pay 10% of the starting price as a deposit. Ask the contact person by email to matteo.tosin@surplex.com for the bank details for the transfer. Caution: Contents on the machine are excluded Auction-ID: A7-43767-25

To participate in the auction it is necessary to pay 10% of the starting price as a deposit. Ask the contact person by email to matteo.tosin@surplex.com for the bank details for the transfer. Caution: Contents on the machine are excluded LOCATION : VERMEZZO (MI) Auction-ID: A7-43767-66

수량: 1 STK-> 115913.15661-> KR= 050 / 1.2-> R1= 600 / 2.4-> m= 0.9 - 1.6 / EW 15-> DP= 28-16 페슬러에서 다양한 다이아몬드 드레싱 휠을 제공함. 적용: 연삭 휠 드레싱 / 정밀 가공 부품당 가격, 다중 구매 시 할인 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.

수량: 1 STK-> 113339.14820-> m= 1 - 3 / EW 15-> DP= 25-8.5 페슬러에서 제작된 다양한 다이아몬드 드레싱 휠이 제공됩니다. 적용: 연삭 휠 드레싱 / 정밀 가공 부품당 가격, 다중 구매 시 할인 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 작성되었습니다.