밀링 머신 사용 판매를 위해 (2,458)

Technical data Manufacturer: LID Model: FP3-50 Machine Type: CNC Universal Milling Machine Control: DECKEL DIALOG 12 (Grundig Elektronik) Serial Number: 2680-0141 Travel X: approx. 500 mm (Source: online) Travel Y: approx. 400 mm (Source: online) Travel Z: approx. 400 mm (Source: online) Spindle holder: SK40 / ISO40 (Source: online) Speed range: approx. 31.5 – 5,000 rpm (Source: online) Feed range: approx. 2 – 6,000 mm/min (Source: online) Rapid traverse: approx. 6 m/min (Source: online) Drive power: approx. 7.5 / 10 kW (Source: online) Table size: approx. 800 x 480 mm (Source: online) Machine weight: approx. 2,800 kg (Source: online) Configuration DECKEL DIALOG 12 CNC control Electronic handwheel Closed protective cabin Coolant Setup Vertical milling spindle Integrated control cabinet CRT Monitor WITHOUT! Machine vise Note No original operating instructions, technical document ...

Dimension of the grooved table, 440 × 310mm, 4 grooves, width of the vise jaw, 230 mm Auction-ID: A1-48824-65

Technical data Manufacturer: KNUTH Werkzeugmaschinen GmbH Model: FPK 4 Machine Type: Tool milling machine / universal milling machine Serial Number: 162500 Year of Make: 2016 Power: 3.2 kW Voltage: 400 V Frequency: 50/60 Hz Table size: 400 x 800 mm (Source: online) Travel X: 500 mm (Source: online) Travel Y: 400 mm (Source: online) Travel Z: 400 mm (Source: online) Spindle speed: 40 - 2,000 rpm (Source: online) Tool holder: ISO 40 (Source: online) Weight: approx. 1,550 kg (Source: online) Configuration 3-Axis Digital Display KNUTH X.pos 3.1 Vertical milling head Horizontal milling device Machine vise Coolant Setup Machine Light Protective cabin / splash guard Instruction manual available Auction-ID: A7-49302-3103

Technical data Manufacturer: LID Model: FP3NC Type: FP3NC Serial Number: 2803-2395 Control: DECKEL Dialog 3 Machine type: CNC Universal Tool Milling Machine X-travel: approx. 400 mm (Source: online) Y-travel: approx. 400 mm (Source: online) Z-travel: approx. 400 mm (Source: online) Table size: approx. 700 x 460 mm (Source: online) Tool holder: SK40 (Source: online) Quill stroke: approx. 80 mm (Source: online) Spindle speed: approx. 31.5 - 6300 rpm (Source: online) Drive power: approx. 14.5 kW (Source: online) Machine weight: approx. 1,800 - 2,000 kg (Source: online) Configuration DECKEL Dialog 3 Control Vertical milling head Horizontal spindle Machine vise Coolant Setup Tool holder SK40 WITHOUT! ATTACHED MACHINE VICE Note: No original documentation available. The technical data was researched and adopted on the basis of several matching Internet sources. Auction-ID: A7-49302-3091

General Description Universal toolroom milling machine manufactured by AVIA, model FOP. Designed for precision milling, drilling, boring and toolroom machining. The machine is equipped with both vertical and horizontal spindle configurations, providing high versatility for a wide range of machining operations. Technical Details Manufacturer: AVIA Model: FOP Machine type: Universal toolroom milling machine Vertical spindle with quill Horizontal spindle with arbor support Swivelling universal milling head Mechanical feed gearbox Separate electrical control pendant Condition Used industrial condition. The machine appears complete with vertical spindle, horizontal spindle support, universal milling head, mechanical feed gearbox and separate electrical control pendant. Operational status, spindle condition and machining accuracy have not been tested. Auction-ID: A7-49124-27

x-travel: 10000 mmy-travel: 1500 mmz-travel: 3000 mmControl: Heidenhain TNC 430 tool taper: ISO BT 50 spindle turning speed - stepless: 10 - 3000 U/minfeed range: 10000 mm/minrapid traverse: 15 m/minmain drive motor: 37 kWtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m CNC-control HEIDENHAIN TNC 430 40-station ATC NC-Universal Milling head, automatic positioning (A/B axis 0.001 / 0.001 deg) Chip conveyorOptional (price upon request): CNC rotary table Juaristi 3000 x 3000 mm- Table load 30 to- Longitudinal movement 2000mm - Separate CNC-control FAGOR The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data Manufacturer: Fabryka Obrabiarek Precyzyjnych AVIA Type: FNF-40P Serial Number: 50691 Year of Make: 1998 Weight: 1,650 kg Spindle speed: 63–3,150 min⁻¹ Display: HEIDENHAIN 3-axis digital display Configuration Universal tool milling machine with vertical milling head, T-slot clamping table, manual handwheels and separate control panel. CE marking available. Remarks The article comes from a company liquidation and was actively used in production until the plant closed. Auction-ID: A7-49302-148

- 2013 Overhauled by REIDEN SWISS- New regrinded- New iTNC530- New Hr410 Handwheel- New CE-Safety - New Milling head gears and bearing- New LS186C Glas scales- New Blum TC60 3D taster- Geomtrical DIN 8615 !- Overhauling cost CHF 250k

Bokö Universal Milling Machine Hydromill Box dimensions: H:900 W:500 L:600 Weight: 5000kg Auction-ID: A7-49302-3005

: gebraucht : 2002 : 4543 : prompt, Zwischenverkauf v : Spanien : 11400 €: 1 : 50 - 1700 (12) U/min: ISO 40 : 600/210/400 mm: 800 x 225 mm: 1700 mm: 1500 mm: 1960 mm: 950 kg: 1,5 kWwith 3-Axis Digital display Fabr. Time Technology EuropeSwivelling universal milling head (Huron design)Horizontal milling device with counter bearing and 1 pc. long milling arborCoolant deviceMachine lightautomatic feeds in X and YMachine feet with vibration absorbersno User ManualDOES NOT COMPLY WITH GERMAN UVV &, AUSTRIAN AMVOBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live demonstration via video call• RISK-FREE PURCHASE: 14-day return po ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 48800 €: 932.08 €: 40 -3200 U/min: ISO 40 : 600 x 500 x 400 mm: 1000 x 500 mm: 3.75 kW: 1814 kg: 1000 mm/min: 8 : 14 x 63 mm: 300 kg: 600 mm: 500 mm: 400 mm: 0 - 600 mm/min.: 0 - 600 mm/min.: 40 - 3200 : 40 - 3200 : +/- 90° °: 100 mm: manuell : 3,75 kW: 1200 x 250 mm: 160 - 660 mm: 95 - 495 (2. T-Nut), 180 mmswiveling operating panel3 axes digital read out Fagor 400ib Innovamotor for horizontal- and vertical spindle: 3,75 kWfeed motors with inverter for X/Y/Z: 0,75 / 0,75 / 0,75 kWball screw spindles for X/Y/Z axesmanual gear box for spindle speeds1 pc. long milling arbor 27 mm3 pcs. recustion sleeves (MK1, MK2, MK3)1 pc. drawing bar ISO40 for horizontal or vertical spindlespindle protection with switchtable safety guard with doors with switchesouter arbor support for horizontal spindleLED work lampautomatic lubrication for X/X/Z guidwa ...

x-travel: 700 / 710 mmy-travel: 275 mmz-travel: 350 mmtaper in main spindle: ISA 40 table surface area: 900 x 250 mmT-slots: 3 x 18 x 60 Stk.turning speeds: 32.0 - 2000 U/minfeed stepless: 15 - 750 mm/minvoltage: 400 Vtotal power requirement: 4.0 kWweight of the machine ca.: 1400 kgrange L-W-H: 1000 x 1400 x 1800 mm from a training workshop (vocational school)Features:- Robust, electric-motor-driven universal milling machine- With horizontal and vertical main spindles Vertical main spindle can be swiveled 360° in two planes- Sturdy T-slot clamping table with 18 mm T-slots - Electric feed control - Stepless speed adjustment - Swiveling machine light- Control cabinet, installed on the right- Original operating instructions Machine data sheetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 160 mmz-travel: 330 mmtable surface area: 600 x 200 mmtable load capacity: 200 kgSpindle Speed: 40-2.000 U/min.tool taper: SK40 dimensions: 1200 x 1160 x 1800 mmmachine weight ab.: 800 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 510 mmy-travel: 450 mmz-travel: 410 mmtaper in main spindle: MAS BT 45° (SK40) table surface area: 800 x 395 mmT-slots: 6 Stk.turning speeds: 50 - 2500 U/minfeed stepless: 4-1600/4-1000 mm/minvoltage: 400 Vtotal power requirement: 5.0 kWweight of the machine ca.: 1400 kgrange L-W-H: 2300 x 2300 x 1800 mm from a training workshop maintained condition ()- in checked conditions - machinevideo - https://www.youtube.com/watch?v=iSTVEdv2fO8Furnishing :- robust universal milling machine- swiveling control panel, right front- rotatable universal milling head (re/li = 90°) with hydraulic tool clamping- manual milling spindle feed, with locking- swiveling milling spindle protection- Stable T-slot clamping/angle table- Axis feeds with rapid traverse- Central lubrication unit- Control cabinet, installed on the left Digital display - without functionThe data for this ad was created with M ...

x-travel: 1016 mmy-travel: 610 mmz-travel: 760 mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 410 mmz-travel: 520 mmtotal power requirement: kWweight of the machine ca.: 2500 trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1250 mmy-travel: 600 mmz-travel: 600 mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 280 / 300 mmy-travel: 250 / 270 mmz-travel: 300 / 310 mmturning speeds: 45 - 2240 U/minturning speeds: 18 Stufenspindle taper ISO: 40 quill stroke: 60.0 mmtable:: 670 x 320 mmtable load: 150 kgfeed range: 12.5 - 630 mm/minfeed: 18 Stufenrapid traverse: 1.200 mm/minworkpiece weight: max. 150 kgT-slots: 5x 12 x 63 mmtotal power requirement: 1.6 kWweight of the machine ca.: 1100 kgrange L-W-H: 1265 x 1080 x 1620 mm New price ~ 25.000 Euro () Special price upon request- in checked conditions - machinevideo - https://www.youtube.com/watch?v=7IsC5cg9WlIFeatures:- Robust electric-driven universal milling machine- ACURITE 3-axis digital display with pivoting control panel, front right including emergency stop button- Electric adjustment of all axes (X/Y/Z axes) Rapid traverse in all 3 directions- Pivoting milling spindle guard- Coolant system- Lower chip tray- Vertical milling head wit ...

x-travel: 750 mmy-travel: 230 mmz-travel: 360 mmtotal power requirement: 5 kWweight of the machine ca.: 1.3 trequired space: 1.65x1.3x2.1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 550 mmy-travel: 155 mmz-travel: 350 mmtaper in main spindle: SK 30 / DIN 2080 table surface area: 640 x 200 mmturning speeds: 50 - 1500 U/minfeeds: 30 - 340 mm/mindistance spindle - column: 165 mmdistance spindle nose and table: 245 mmvoltage: 380 Vtotal power requirement: 1.3 kWweight: ca. 1250 kgrange L-W-H: 950 x 1000 x 1600 mm from a vocational school (!)Furnishing :- robust / conventional universal milling machine- rotatable / swiveling vertical milling head- Stable T-slot clamping/angle table- automatic table longitudinal movement- Feed range adjustable - 8x steps- Pole-changing drive motorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1050 mmy-travel: 560 mmz-travel: 520 mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: 7 kWweight of the machine ca.: 1.8 trequired space: 2.3x2x2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): / mmx-travel: 1750 mmy-travel: 1250 mmz-axis: 1250 mmtotal power requirement: kWweight of the machine ca.: 13 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 600 mmz-travel: 460 mmtotal power requirement: 4 kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mmy-travel: 375 mmz-travel: 250 mmtable-size: 205 x 800 mmT-slots: 4 x 45 14 H7speeds: 50 - 3150 U/mintool taper: 40 ISOquill stroke: 50,0 mmFeeds X + Z Axis: 5.0 - 1000 mm/minFeeds Y Axis: 5.0 - 670 mm/minrapid traverse: 2.4 / 1.6 m/mincontrol: Heidenhain total power requirement: 5.1 kWweight: 950 kgrange L-W-H: 1860 x 1790 x 1750 mm Machine from a vocational training center In good condition ()Equipment:- MAHO universal tool milling/drilling machine- HEIDENHAIN TNC 135 positioning/path control 3-axis manual data input control Programmable by the machine operator Convenient and easy operation- Electric motor-driven feed rates in all axes (X/Z/Y) X and Z axis: 5.0 - 1000 mm/min with rapid traverse of 2.4 m/min Y axis: 5.0 - 670 mm/min with rapid traverse of 1.6 m/min- Tiltable milling head to both sides- Tiltable T-slot universal table- Vertical clamping range- Continuously ...

x-travel: 400 mmy-travel: 390 mmz-travel: 350 mmControl: DIALOG4/CONTOUR 3 tool taper: SK 40 spindle turning speed range: 31 - 3150 U/minfeed range: 10 - 2000 mm/mintotal power requirement: kWweight of the machine ca.: 1,7 tdimensions of the machine ca.: 1.600 x 2.500 x 2.000 mmCNC control DIALOG4/CONTOUR 3 Table: 700 x 480 mm rigid angle tableSwivel-type vertical milling headCoolant tankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mmy-travel: 450 mmz-travel: 450 mmtotal power requirement: 4 kWweight of the machine ca.: 3,3 tdimensions of the machine ca.: 2 x 3 x 3 mNo. 2456Universal tool milling machine MAHO MH 800Working area: 700 x 450 x 450Drive: 4 kWDigital display MitutojoUniversal built-in rotary table 1050 x 627 mmQuill feed gear 0.02 - 2 mm/revSpindle ISO 40,Speed range 32 - 1600 1/min,feeds 5-500 mm/min,rapid traverse 1.4 (0.7) m/minCross table movement by hand 225 mm,Table top rotation 360 °Table swivel/tilting +- 30 ° eachSpace requirement approx. 2 x 3 x 3 m,Weight approx. 3.3 to.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1200 mmy-travel: 400 mmz-travel: 370 mmControl: Retrofit Dialog 11 - 7.07 table surface area: 1400 555 mmtotal power requirement: 5 kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 332,2 mPacking: 3 mRetrofit by FPSAlternate NC - Rotary Table availableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 290/300 mmy-travel: 150/160 mmz-travel: 330/340 mmtotal power requirement: kWweight of the machine ca.: 675 kgdimensions of the machine ca.: 2700 x 2500 mmThe machine was overhauled by the company Harich in 2017.Machine number: 57330/08Technical data:Table longitudinal movement (motorized/manual): 290/300 mmSpindle head transverse movement (motorized/manual): 150/160 mmSupport vertical movement (motorized/manual): 330/340 mmAngle table clamping surface: 600 x 210 mmSpindle speeds: 40 – 2000 rpmTool holder: Standard taper 40Motor power: 1.5/1.9 kWFeed rate range (infinitely variable): 5 – 500 mm/minRapid traverse: 1200 mmEquipment:3-axis digital readout (Heidenhain)Vertical milling spindle with quill adjustmentAdditional horizontal spindleREPAR 2 safety device (www.repar2.com)Operating manualThe machine will be loaded onto a Euro-pallet, total height: 1900 mm.The data for t ...

x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmControl: Heidenhain TNC 113 total power requirement: 4 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 222 mNo. 5152Universal tool milling machineDeckel FP 4 M (K) - 2203Working area: 500 x 400 x 400Drive: 4 kWSpindle holder SK 40 / DIN-2080Speed range 50 - 2,500 min-1Feed rates 8-630 mm/min steplessRapid traverse 1.3 m/minFixed table 800 x 460 mmChip trayHeidenhain TNC 113 Active Digital readoutSpace requirement approx. 2 x 2 x 2mWeight approx. 1,500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.