밀링 머신 사용 판매를 위해 (2,495)

x-travel:560 mmy-travel:500 mmz-travel:450 mm

x-travel:560 mmy-travel:500 mmz-travel:450 mm

Nicolas Correa L30/43 CNC milling machine with movable post, year 1996, equipped with Heidenhain numerical control. Robust machine of Spanish manufacture, suitable for machining large parts, with an X-axis stroke of approx. 4,300 mm, a Y-axis stroke of 1,200 mm, an ISO 50 cone spindle, a large fixed table and a total weight of approx. 28 tons. The machine is equipped with a sprinkler system and a chip evacuation system. Auction-ID: A1-47080-13

x-travel:200 mmy-travel:100 mmz-travel:100 mmtotal power requirement:1,5 kWweight of the machine ca.:1,1 tdimensions of the machine ca.:0,6 x 0,6 x 1,8 mtable-size:350 x 150 mmNew class condition milling machine with vize and dividing head- Original year of manufacture unknown

x-travel:14000 mmy-travel:3100 mmz-travel:1.200 mm (220 - 1.420) mmdistance between columns:4.417 mmtable-size:14.000 x 2.500 mmworkpiece weight:15.000 kg/mdrive capacity - spindle motor:25 kWspindle cone:63 HSKspindle turning speed range:18000 rpmmilling feeds:30000 mm/mindimensions of the machine ca.:15.000 x 8.418 x 6.033 mmweight of the machine ca.:135 tCNC controller: SIEMENS 840 D universal milling head:5 Achsen mit ?C5C? Elektrospindel automatic tool changer:24 fach

x-travel:2000 mmy-travel:800 mmz-travel:800 mmtable-size:2.000 x 700 mmworkpiece weight:3500 kgdrive capacity - spindle motor:17 kWspindle cone:50 ISOspindle turning speed range:3000 U/mindimensions of the machine ca.:5265 x 3250 x 2730 mweight of the machine ca.:9 tCNC controller:HEIDENHAIN TNC-426 :manuell used universal bed type milling machine with chip conveyor, automatic 2 position (vertical/horizontal) head 3000Rpm The retrofitting jobs done in this machine, are the same than those done to all of our machines.- Completely repair of the head, replacing bearings, shafts and engaging gears.- Completely replacement of all the bearings of the machine.- Replacing the joining screws of the bodies.- Completely repair of spindles.- Adjustment and repair of axis.- Grinding and adjusting all guides, because of deterioration.- Grinding and adjusting of the guide ways of the ram.- Repairing o ...

x-travel:30000 mmy-travel:3600 mmz-travel:1900 mmmilling head speed:1 - 4000 U/minspindle taper ISO:50 feed speeds:1 - 10000 mm/minrapid traverse:25 m/minmilling spindle motor:46 kWtotal power requirement:85 kWdimensions of the machine ca.:45 x 8,7 x 5,5 ü.F. mwith CNC HEIDENHAIN iTNC 530autom. milling head indexing 2,5° floor plate field 31000 x 2500 mm ( 4 floor plates 6000 x 2500 mm + 1 floor plate 7000 x 2500 mm )2 chip conveyors, coolant attachment

x-travel:2000 mmy-travel:1500 mmz-travel:1460 mmmilling spindle motor:35/30 kWspindle taper ISO:50 spindle turning speed range:24 - 3000 U/mintable surface area:1350 x 1550 mmtable load:6 tfeed speeds:10 - 3000 mm/minrapid speed:10 m/mintotal power requirement:48 kWweight of the machine ca.:24 tCNC HEIDENHAIN TNC 426B-axis table roundHoriz. and Vertikal automatic positioning Milling Head

x-travel:1000 mmy-travel:1150 mmz-travel:700 mmtable-size:900 mmtable load:1500 kgspindle speeds:10.000 1/minspindle drive:Motorspindel von Cytec CS34-180-A 34&42KW/160&200 Nmspindle taper:A100 HSKT-slots:18mm/7/100 mmmilling feed range:20.000 mm/minrapid traverse feeds:X/Y/Z: 24 m/mindiameter of tools max.:150 mmworkpiece length:300 mmweight of tools max.:20 kgweight of the machine ca.:15 tdimensions of the machine ca.:s. Katalog mCNC controller:Heidenhain iTNC-640 HSCI-Steuerung cnc rotary table:von Cytec; mit Ø900mm; 800 1/min Drehmomenttisch (AS3347) + HSK-T63/100 Spindel & ATC + TNC-640 Fräsdrehzahlregelung B-axis:Fräskopf, 0-180° c-axis:0,001° automatic tool changer:HSK-A/T100; 60 fachScales:in X/Y/Z von Heidenhain mit Druckluft inner coolant:20

x-travel:16300 mmy-travel:2600 mmz-travel:1600 mmspindle taper ISO:50 spindle turning speed range:22 - 4000 U/minrapid traverse:24 / 36 m/minmain drive:37 kWtotal power requirement:50 kWwith CNC HEIDENHAIN TNC 430automatic Universal Milling Headautomatic toolchanger 90-pocketscoolant attchament and chip conveyor

x-travel:6500/13150 mmy-travel:4000 mmz-travel:1250 mmw-axis:2250 mmtable surface area:5500/12150 x 3000 mmmax. workpiece weight:70.000/105.000 kgram head dimension:480 x 510 mmmilling spindle motor:63 kWmax. torque on the spindle:3300 Nm tool taper:DIN 39871 AD ISO 50 milling head speed:6,3 - 4000 U/minfeed speeds:1 - 24000 mm/minw-axis:1 - 6000 mm/min.distance between columns:3500 mmpassage:3000 mmtotal power requirement:120 kWweight of the machine ca.:245 tdimensions of the machine ca.:29,0 x 7,7 x 8,1 mThe machine is in mint condition and was generally overhauled in 2020!with CNC SIEMENS 840 Dautom. tool magazine for 153 tool stationsautom. milling head magazine for 6 heads milling heads - straight - straight extended length -milling head -angular head standard - 4000 rpm, 144 x 2,5°, ISO 50milling head -angular small extended length -40 kW, 4000 rpm, 1800 Nm, 144 x 2,5°, ISO 50m ...

x-travel:3600 mmy-travel:1250 mmz-travel:1600 mmtable load capacity:8000 kptable clamping surface::4100 x 1050 feed range:10 - 5000 mm/minrapid traverse feeds:10000 mm/minspindle motor:29 kWspindle taper::ISO 50spindle turning speed range:5 - 4000 U/mintotal power requirement:70 kWweight of the machine ca.:28 tdimensions of the machine ca.:8,5 x 5,4 x 3,2 mMachine with Heidenhain TNC 430 Steuerung- tool changer 30-fold- milling head indexable 2,5°- 4. axis turn table

x-travel:600 mmy-travel:450 mmz-travel:400 mmTable area:700 x 480 mmspindle turning speed range:10 - 3150 U/minspindle taper ISO:40 quill stroke:80 mmdimensions of the machine ca.:1,8 x 2,1 x 1,9 mtotal power requirement:8 kWweight of the machine ca.:3,5 tMachine with universal turn, sviwel and tilting table- CNC control DIALOG II- splash guards- misc. parts

Operation unknown. Already disconnected. Without identification plate. Auction-ID: A1-46783-44

JEYMA brand copying pantograph for milling and profile reproduction operations. Equipped with mechanical tracking and copying system by means of a probe. Work table with T-slots for fixing parts and tools. Suitable for mold making, dies, engravings, and precision machining. Robust cast iron construction for industrial work. Exact year and model not visually identified. Used status. Auction-ID: A7-47333-4

x-travel: 300 mmy-travel: 160 mmz-travel: 290 mmtable surface area: 210 x 600 mmtool taper: SK 40 spindle turning speed range: (16) 40 - 2000 U/minfeeds -stepless-: 5 - 500 mm/minrapid traverse: 1,2 m/minspindle motor: 1,5 / 1,9 kWtotal power requirement: 9,5 kVAweight of the machine ca.: 730 kgdimensions of the machine ca.: 2000 x 2200 x 1655 mmThe machine comes from a vocational training center.Equipment:3-axis active digital readout made by HeidenhainFixed angle tableCoolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 380 mmz-travel: 350 mmtool taper: ISO 40 spindle turning speed range: 63.0 - 4000 U/minfeeds: 10 - 1000 mm/minquill stroke: 50.0 mmtable load: ca. 250 kgtable-size: 800 x 360 mmT-slots: 14H7 - 5/63 mmrapid traverse X-axis: 1.5 m/minrapid traverse Z-axis: 1.5 m/minrapid traverse Y-axis: 1.0 m/minControl: DIGI VRZ 650 Number of working hours: 810 hvoltage: 380 Vcontrol voltage: 110 Vengine output: 8.0 kWweight: 1850 kgdimensions of the machine ca.: 1880 x 1796 x 1840 mm from a training center very little run () operating hours approx. 810 hoursEquipment:- robust conv. electro-motorized universal milling machine- HEIDENHAIN digital display incl. control panel swiveling, front right display font 0.005/0.001 mm- Electro-motorized adjustment of all axes (X/Y/Z axis) rapid traverse in all 3x directions Manual adjustment via handwheel also possible- Infinitely variable  ...

x-travel: 400 mmy-travel: 375 mmz-travel: 350 mmturning speeds: 63 - 4000 U/minspindle taper ISO: 40 Pull studs: ISO TYP B quill stroke: 50.0 mmtable:: 650 x 350 mmworkpiece weight: max. 200 kgT-slots: 5x 14H7 feed range: 10 - 1000 mm/minrapid traverse: 1.5 / 1.0 m/minNumber of working hours: ca. 504 hcontrol: DIGI VRZ 650 voltage: 380 Vtotal power requirement: 8.0 kWweight of the machine ca.: 1550 kg.range L-W-H: 1640 x 1580 x 1840 mm from a training center very little run () operating hours approx. 504 hoursEquipment:- robust conv. electro-motorized universal milling machine- HEIDENHAIN digital display incl. control panel swiveling, front right display font 0.005/0.001 mm- Electro-motorized adjustment of all axes (X/Y/Z axis) rapid traverse in all 3x directions Manual adjustment via handwheel also possible- Infinitely variable speed adjustment- Vertical milling head with quill adjustme ...

Brand: LagunModel: FCM-152Machine No.: 42782Year of manufacture: 1998Universal adjustable headWork table with T-slotsAutomatic feedsCentralized lubrication systemFront work protectionManufactured by Ladarasa S.L. (Goratu Group)Visual condition: used, with chips and normal signs of industrial use visible in the images Auction-ID: A7-47333-35

Brand: Lagun Goratu GroupModel: GBM 18CNC Control Siemens SinumerikUniversal adjustable CNC headWorktable 1800 x 700 mm Travels: X 1700 mm, Y 800 mm, Z 800 mm (1000 mm optional) Spindle taper ISO 50 DIN 69871A Main motor power 11.5 kW (16.5 kW optional) Continuous variable speed 40–3000 rpm Working advances 0–5000 mm/min Fast advance 10000 mm/min Integrated coolingProtective fairing with Access doorsApproximate weight of the machine: 10,100 kg Visual condition: used, with normal industrial signs visible in the images Auction-ID: A7-47333-36

FEXAC brand universal milling machine. Equipped with adjustable universal head and Fagor digital display for X and Y axes. Grooved table for milling, drilling and general machining operations.Conventional machine for maintenance, manufacturing and precision machining work. Includes clamping jaw installed on the work table. The electrical panel is to be repaired. Exact year and model not visually identified. Auction-ID: A7-47333-2

Brand: HellerModel: FU 1120/1250Year of manufacture: 2011Conventional universal routerUniversal adjustable headApproximate work table 1250 mmFagor digital display 3 axes (X, Y, Z) Power supply: 380 V / 50 HzWeight: 260 kg (according to plate) Includes lubrication system and integrated electrical panelSold according to visible condition in the photographs. Auction-ID: A7-47333-27

Brand: LagunModel: FCM-152Year of manufacture: 1991Serial number: 33989Power: 13.1 kWUniversal adjustable headAutomatic longitudinal, transverse and vertical advancesFagor 3-axis digital displayWork table with T-slotsCentralized lubricationIncludes instruction manualVisual status: used and operational according to the appearance of the images Auction-ID: A7-47333-34

Lagun model 3 CNC CNC milling machine. Manufactured in 1999. Machining machine equipped with CNC numerical control and independently operating display. Grooved work table for fixing parts and tools. Suitable for milling, drilling and precision machining operations on metal materials. Robust cast iron construction for industrial use. Machine number: 43007. Manufactured by Lagun Ladarasa S.L., Vitoria-Gasteiz, Spain. Used status. Auction-ID: A7-47333-7

Brand: CMEModel: BF-01Type: Universal bench milling machineUniversal adjustable headDigital dimension display (DRO) installedT-slot work tableIncludes machine jawVisible lubrication/cooling systemFoldable front protectionConventional machine for milling, drilling and general machiningoperations Year of manufacture not identified in the photographs providedUnchecked status and operationSold according to the condition visible in the photographs Auction-ID: A7-47333-24

CNC bench milling machine brand MTE model BF 3200. Manufactured in 1998. Heidenhain 426 numerical control. Longitudinal travel (X): 3000 mm. Transverse travel (Y): 1000 mm. Vertical travel (Z): 1250 mm. Work table of 3200 x 1000 mm with a load capacity of up to 11,000 kg. Universal automatic double rotation head with CNC angular positioning.Variable spindle speed from 40 to 2,500 rpm. Spindle power of 22 kW. Programmable advance up to 12,000 mm/min. Approximate weight of the machine: 19,500 kg. Includes electrical panel, hydraulic group and available technical documentation. TRANSPORTATION: 6 packages Total weight: 19,500 kg Column + electrical panel: 2.30 × 2.30 × 3.25 m Table: 6.60 × 1.35 m Hydraulic unit: 1.30 × 0.80 m Pallet tanks: 2.10 × 1.00 m Auction-ID: A7-47333-6

Brand: CMEModel: BF-01Year of manufacture: 05/1992CNC Heidenhain controlTotal power: 25 kWAdjustable headT-slot tablePartial protection cabinUnchecked condition and operationSold according to visible condition in the photographs Auction-ID: A7-47333-22

ANAYAK turret milling machine equipped with a 3-axis digital dimension display (DRO). Vertical adjustable head and work table with T-slots. Equipped with automatic feeds and cooling system.Suitable for milling, drilling and general machining of metal parts in production and maintenance workshops. Auction-ID: A7-47328-3

• Engine 0.75 KW-2800 rpm. • Milling head working from above. • 2 horizontal holes. • Maximum cutter diameter approx. 100 mm. • Table dimensions 2380 x 200 mm. • Pneumatic horizontal gripper. • New, unused machine. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47127-31

Conventional universal milling machine equipped with adjustable vertical head. Large work table with T-slots. Manual axis drives.Equipped with a cooling system. Suitable for milling, drilling and general machining of metal parts. Auction-ID: A7-47328-1