기타 밀링 머신 (17)

제작 연도: 2015 기계 종류: BC 1001 HS 총 생산 시간: 1608시간 총 대기 시간: 5070시간

Steel Storage Structure for Plates and Materials Type: Structure for storing plates and materials Material: High-strength structural steel Profiles: Welded rolled or tubular steel sections Construction: Reinforced structure with horizontal and vertical bracing Finish: Anti-corrosion paint or epoxy coating Height: 2,000 mm – 4,000 mm Width: According to number of storage bays Depth: Adapted to sheet dimensions Capacity per level: Variable (e.g., 1,000 kg – 5,000 kg per compartment) Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-48274-45

밀링 머신 TOS KURIM FRO 6, FRO8

WITHOUT tools and clamping devices Gearbox defective, feed gears can no longer be shifted Output via goods elevator Pick-up date: 17.08 - 19.08 Auction-ID: A1-48584-17

샤프트 연삭, 연마, 밀링 머신 사양: - 속도 850 - 12000 rpm - 플렉시블 샤프트 근사치. 2 미터 - 이동식 차대 - 연삭 및 연마 도구에 적합 - 드라이브 380V / 1.0hp - 필요한 공간 약. 너비 500 x 높이 1000 x 깊이 500 mm - 무게 약. 45kg - 이동식 차대

Technical data Table size: 1,240 × 305 mm Travel: X: 950 mm Y: 400 mm Z: 460 mm Spindle speed: infinitely variable approx. 50–3,600 rpm Spindle drive: 2 hp (approx. 1.5 kW) Vario speed Power supply: 380 V / 50 Hz (original version) Spindle holder: ISO 40 Facilities Infinitely adjustable Panak milling head X-axis power feed Coolant device Machine vise Original user manual Robust cast construction with swivelling milling head Tool cabinet with contents Transport dimensions tool cabinet 750x550x1000 Auction-ID: A1-48591-5

소형 드릴링/밀링 머신 ISERT ELECTRONIC X 트래블: 350 mm Y축 이동 거리: 300 mm Z축 이동 거리: 70 mm 회전: 8000 / 9500 / 13500 / 20500 / 24000 rpm 이 기계는 인쇄 회로 기판 또는 기타 용도를 드릴링하는 데 사용할 수 있습니다. 기계는 더 이상 존재하지 않는 PC를 통해 제어되었습니다. 수동으로 사용할 수 있습니다. 장착 : 1 밀링 머신 KRESS 전압: 220V 모노 크기 (L x W x H) : 950 x 700 x 700 mm 무게 : 약 60 KG

Year of construction: approx. 1981 Accessories: - Universal milling head, tangential milling head, - Interchangeable wheels - 2 cutting equipment, - little used Auction-ID: A1-48483-48

지그 보링 / 밀링 머신 하우저 3DR 트래블 X: 400 mm 트래블 Y: 200 mm 트래블 Z: 400 mm 스핀들 : 2 속도 콘 : CM2 스핀들 출구: 120 mm 2 속도 범위 60-1500 RPM / 1500-3000 RPM 테이블 크기: L 590 mm x W 320 mm 스핀들의 속도 변동기 2 진보 자동 하강: 0,03 mm/분 - 0,06 mm/분 미투토요와 함께 기능하는 X축 고안 Y 및 Z축: 결함 있는 스케일 전압: 380 V 폭: 1500 mm 깊이: 1700 mm 낮은 위치에서의 높이: 1800 mm 무게: 약 1,5 T

Waelzfraeser with shaft FETTE 2356808 GN461 DIN3968AAA 002.90 2697.1 02 m³ L1 E= 20° DIN3972 I - Stgs. 1°24 pz9.4276 HN PM3 Auction-ID: A1-48483-19

The conception of the basic machine is characterized by the following features: - horizontal position of the workpiece spindle; vertical position of the milling cutter spindle or of the milling head - The workpiece is picked up between the workpiece headstock (left) and the tailstock (right) - The radial slide is mounted on the base (X-axis) - The axial slide moves on the radial slide (Z-axis) - The shift milling head is equipped with automatic angle adjustment (A-axis); the shift slide (Y-axis) moves tagential to the Workpiece diameter - CNC controlled - IBH control - Charging device - a lot of accessories Technical data: - Largest millable module with hobs according to DIN 8002: 4.5 mm - Largest millable module for high-performance milling: 3.0 mm - Number of teeth: 2 - 999 - Max. workpiece nozzle for manual loading: 200 mm - Max. workpiece nozzle for autom ...

Workpiece diameter at ratio 1:10 = 300mm, workpiece diameter at ratio 1:1 = 212 mm, number of teeth: 6-200 Auction-ID: A1-48483-39

Gear hobbing machine – vertical: Make: Pfauter Type: P 630 Year of manufacture: unknown Control type: conventional Technical details: - Condition good - Wheel diameter - max. 630 mm - Wheel width 375 mm - Module - max. 10 - Clamping table 550 mm - Table bore 125 mm - Milling cutter speeds infinitely variable 62 - 390 rpm - Mounting cone MORSE 5 - Axial feeds 0.40 - 6.80 mm/rev - Radial feeds 0.10 - 1.76 mm/rev - Distance between milling spindle and clamping spindle 50 - 425 mm - Tooth count range min. 8 - Milling cutter diameter x width 192 / 215 mm - Milling cutter displacement 200 mm - Main drive motor 7.5 kW - Total power requirement 21 kVa - Machine weight approx. 8.2 t Additional information: Equipment of Machine: - Universal milling head with tangential displacement - Pressure reducing valve for counter holder - Magnetic chip conveyors Auction ...

Year of manufacture approx. 1980, wheel diameter: 406mm, wheel width 420mm, module min.-max.: 0.5-+4.3, milling cutter speeds 49-246 rpm Auction-ID: A1-48483-11

Taper size: SK 30; Equipped with schunk NSE 138 pneumatic clamp Auction-ID: A1-48232-70

MECAL MC309 NIKE CNC machining center for aluminum and PVC profiles. This computer-controlled machining centre is designed for milling, drilling and machining aluminium and plastic profiles and is equipped with a closed machining cabin, automatic profile clamps and a movable machining unit. The machine is equipped with an external control console with Siemens PC, Samsung monitor and Mecal control. In addition, several tool holders with clamping tools are included, as shown in the photos. According to the nameplate, it is a MECAL MC309 NIKE, built in 2006. The machine is suitable for professional applications in window, door and façade construction or other profile processing industries. Signs of wear appropriate to age and industrial use are present. Auction-ID: A3-46197-14845

테이블 표면 1,524 x 355 mm 슬롯 폭 18 mm 테이블 종방향 공급 3 - 1016 mm/분 - 급속 급수 2,400 mm/분 테이블 크로스 피드 3 - 1016 mm/분 - 급속 급수 2,400 mm/분 슬롯 간 거리 100 mm T-슬롯 수 3 종방향 스트로크 1,220 mm 횡방향 스트로크 508 mm 수직 스트로크 508 mm 스핀들 테이퍼 ISO 50 주 모터 전원 7.36 Kw 전압 380/220 V 포함 액세서리: 치수 표시, 밀링 커터 축, 밀링 커터, 심, 콘, 콜�