飲料機械 中古 販売のため (2,116)

Radenska & Steinle(RS)SPN-2Sは、主に飲料業界でリサイクル可能な� �トルクレートの洗浄に使われるプロ用クレートウォ ッシャーです。 アイテム状態:運用中 入手可能日:2027年1月13日より 解体:買い手による 閲覧中。取り決めで 接続:380 V、50 Hz 出力:8 kW 所在地:ドイツ、バイエルン�

Schymanski GmbH(MAG)タイプ:SIRIO 8-24は、主に飲料業界で返却可能なボトルに使用され ている産業用ボトル洗浄機/ボトルウォッシャーです 。 アイテム状態:運用中 入手可能日:2027年1月13日より 解体:買い手による 上映:アレンジメントによる 所在地:ドイツ、バイエルン州 接続:400 V、50 Hz

MIHO DAVIDは非常に革新的な空瓶検査機です。このシステ� �は世界中の飲料・食品業界で、再利用可能かつ使い 捨てのボトル(ガラス製またはPET製)の欠陥をシーム� �スに検査し、再充填前に確認しています。 技術性能データ: 高速化:このシステムは組立ライン運転で最大72,000本 のボトルを1時間に完全に制御できます。 柔軟性: このシステムは、さまざまな形状やサイズのコンテ� ��に適しています。 衛生的なデザイン: 機械設計はボトリング工場の厳しい衛生要件に最適� ��されており、清掃も容易です。 アイテム状態:運用中 入手可能日:2027年1月13日より 解体:買い手による 上映:アレンジメントによる 所在地:ドイツ、バイエルン州 接続:230 V、50  ...

KHS、Krones、Hormesは飲料および液体食品業界向けの瓶� ��めシステムおよび機械の主要な製造・供給業者で� �。 ボトル充填器 製造元:KHS タイプ:VVF KHSボトル充填システム、タイプVVF(しばしばデルタVVF またはKHS/SEN VVF)は、CO2を含む飲料をガラス瓶やPETボトルに充填す るために特別に開発された、古典的な機械制御の背� ��充填システムです ボトルキャップシステム 製造元:ホルメス タイプ:KK/SV(クラウンコルク/スクリューキャップの� �み合わせ) この機械は非常に狭い空間で2つの異なるキャップ技 術を組み合わせています。ボトル(主にガラス瓶)を� �クラウンコルク(ビールやレモネード用)またはスク� ��ューキャップ(ジュース、ワイン、ミネラルウォー� ��� ...

Radenska & Steinle(RS)製のERO-3Tは、飲料業界向けの産業用ボトル� �ッカー(パッカー/アンパッカー)です。この機械は、 通常、ビール、ミネラルウォーター、ソフトドリン� ��などのリターン可能なガラス瓶の自動充填ライン� �使用されます。 技術的仕様と詳細 機械タイプ:ボトルパッカー(グリッパーヘッドパッ� �ー) 梱包ヘッド:3つのヘッド(これが「3T」と呼ばれる由� �)で、ボトルセグメントの並行掴みと移動用に設計� �れています(例:6x4や5x4の標準クレートサイズの梱包� ��リッド)。 作動圧力:6バールの空気圧(グリッパーヘッドの空気� ��制御)。 アイテム状態:運用中 入手可能日:2027年1月13日より 解体:買い手による 上映:アレンジメントによる 所在地:� ...

Overview This Kematec MBK 12 AS, built in 2006, places shrink capsules on wine bottles and shrinks them on in 12 heating stations. It runs at 3,000 - 12,000 bottles per hour and covers bottle heights of 235 - 360 mm and bottle diameters of 50 - 115 mm. The machine is still installed in a wine bottling line and can be inspected on site. Technical data Manufacturer: Kematec Model: MBK 12 AS Year of manufacture: 2006 Machine type: capsule placing and shrinking machine Output: 3,000 - 12,000 bottles/h Capsules: shrink capsules, max. length 80 mm, max. diameter 40 mm Head diameter: 33 mm Heating stations: 12 Capsule magazine: 1,800 capsules Bottle height: 235 - 360 mm Bottle diameter: 50 - 115 mm Working height: 1,100 mm (+/- 50 mm) Direction of travel: left to right Power supply: 400 V, 50 Hz; main drive 0.75 kW Compressed air: 6 - 7 bar, approx. 350 l/min Overall dimensions (L x W x H): 3,7 ...

Overview KHS Innofill NRF filling and closing monoblock for still wine in glass bottles, built in 2007. A 50-valve filler is followed by two 10-head closers: a KHS natural-cork closer with vacuum device and an aluminium roll-on capper by Zalkin, so the machine closes either corks or screw caps. Output 12,000 bottles per hour. The operator panel and software were updated by KHS in 2022. Technical data Manufacturer: KHS Model: Innofill NRF Year of manufacture: 2007 Output: 12,000 bottles/h Filler: 50 filling valves, pitch circle 1,800 mm, filling tube diameter 20 mm Cork closer: KHS, 10 heads, pitch circle 360 mm, electrically heated cork jaws, cork sorter mounted on top Vacuum device with vacuum pump Screw-cap closer: Zalkin aluminium roll-on capper, 10 heads, pitch circle 360 mm, for 31.4 x 24.2 mm aluminium caps Machine pitch 36π, running direction left to right Conveyor: stainless ste ...

Overview This Logopak LOGOMATIC 920 II PF, built in 2007, is a print-and-apply labelling system for pallets. It prints labels by direct thermal or thermal transfer and applies them with a telescopic tamp applicator onto pallets standing still beside the conveyor. The machine is still installed at the end of a wine bottling and palletising line and can be inspected on site. Technical data Manufacturer: Logopak Model: LOGOMATIC 920 II PF Year of manufacture: 2007 Machine type: print-and-apply pallet labeller Output: 4 labels/min Print methods: direct thermal and thermal transfer Label size: 148 x 210 mm (W x H), 3 mm gap Label roll: max. diameter 400 mm, core diameter 76 mm (150 mm) Mounting: vertical, print head at the bottom Control: Logopak POWER LEAP II Interfaces: W&T COM server, RS 232 Power supply: 88 - 240 V AC, 50/60 Hz; 7 A at 115 V, 3.5 A at 230 V Compressed air: required (valve ...

Overview This Kematec T20-3 KMT, built in 2006, dries filled bottles with air knives on their way through an enclosed tunnel before labelling. The bottles run on a 120 mm plastic chain conveyor under inclined air nozzles on both sides. The machine is still installed in a wine bottling line and can be inspected on site. Technical data Manufacturer: Kematec Model: T20-3 KMT Year of manufacture: 2006 Machine type: bottle dryer (air knife tunnel) Conveyor: plastic chain, 120 mm wide Power supply: 400 V, 3 phases, 50 Hz Control voltage: 24 V DC Overall dimensions (L x W x H): 4,500 x 1,350 x 2,600 mm Equipment Drying tunnel with inclined air knife nozzles above and on both sides of the conveyor, fed by vertical air ducts Infeed screw and curved conveyor sections with adjustable guide rails and quick-release clamping levers Siemens SIMATIC touch panel (French, Dutch, German) with output counte ...

Overview This KHS Innopack CA-1, built in 2006, is a carton erector that forms cartons from flat blanks and closes their bottom with hot-melt glue. Blank stacks are fed on a roller conveyor into the magazine; suction grippers pick each blank, erect it, fold the inner bottom flaps, apply glue with a Robatech hot-melt unit, close and press the outer flaps and discharge the carton onto the outfeed roller conveyor. The machine is still installed in a wine bottling and packaging line and can be inspected on site. Technical data Manufacturer: KHS Model: Innopack CA-1 Year of manufacture: 2006 Machine type: carton erector with bottom gluing Glue system: Robatech Concept hot-melt unit with glue nozzles for the bottom flaps Power supply: 400 V, 3 Ph, 50 Hz, 15 A Compressed air: min. 5 bar operating pressure Overall dimensions (L x W x H): 4,550 x 3,450 x 2,720 mm Blank infeed: roller conveyor wit ...

Overview This KHS Innopack SP, built in 2006, is a pick-and-place case packer for bottles. Empty cases run on the case conveyor into the packing zone, where they are stopped and centred; the gripper head picks the bottle formation from the four-lane infeed table and sets it into the cases. The lifting unit travels on a vertical lifting column with counterweight, and the motion is controlled by a KUKA KR C2 controller with KCP teach pendant. Four change-part trolleys with gripper heads for different bottle sizes are included. The packer is still installed in a wine bottling and packaging line and can be inspected on site. Technical data Manufacturer: KHS Model: Innopack SP Year of manufacture: 2006 Machine type: pick-and-place case packer Bottle infeed: 4 lanes, lane width 85 mm Gripper head: 2 x 18 bottle tulips, formation 3 x 6 bottles Case clearance: 175 x 400 mm Power supply packer: 4 ...

Overview This KHS Innopro warmer-cooler is a skid-mounted thermoregulator for wine, built in 2006 by KHS AG in Dortmund, Germany. It brings wine to a set temperature, heating or cooling as required, at up to 9,900 l/h (99 hl/h), designed for an outlet temperature of 18 °C. The core is a three-section Thermowave plate heat exchanger; stainless steel piping, pumps, pneumatically operated valves and instrumentation are mounted on one frame and run from a freestanding KHS stainless steel control cabinet with touch panel. The unit was last used in a wine bottling line. Technical data Manufacturer: KHS AG (Dortmund, Germany) Model: Innopro warmer-cooler Year of manufacture: 2006 (control cabinet 2007) Machine type: thermoregulator for heating or cooling wine, skid-mounted Product: wine Throughput: 9,900 l/h (99 hl/h) Cooling section: wine from 26 °C to 18 °C, cold water 10 °C to 14 °C at  ...

Overview This KHS Corvus is a skid-mounted cartridge filtration system (microfiltration), built in 2007 by KHS AG in Dortmund, Germany. Four stainless steel KHS cartridge filter housings for 40-inch cartridges are connected through a pneumatically operated valve manifold and controlled from the skids own stainless steel control cabinet with Siemens PLC. The Corvus range is designed for clarifying filtration, cold sterile filtration and safety filtration of wine, beer and water ahead of the filler. This unit was last used for wine filtration in a bottling line. Technical data Manufacturer: KHS AG (Dortmund, Germany) Model: Corvus Year of manufacture: 2007 (filter housings 2006) Machine type: cartridge filtration system (microfiltration), skid-mounted Filter housings: 2 housings for 19 cartridges of 40 inch, 143 L each; 2 housings for 12 cartridges of 40 inch, 108 L each Housing design rat ...

Flow steam generator with 33 kw/h Capacity: 50 kg/h steamStrom / Volt: 400capacity / hour ca.: 50customs no.: 84022000

New Seegräber GmbH TD9 electric steam generator. Manufacturer: Seegräber GmbH, manufacturer article: 100-0001-0900.9.9 kW, steam output 15 kg/h, maximum steam pressure 2.5 bar.3/N/PE 400 V AC, 50 Hz, CEE 5-pole 16 A, fusing 16 A.Water: GeKa coupling, minimum 2.5 bar, steam outlet NW 25.760 × 345 × 690 mm, approx. 50 kg. Cable approx. 5 m.Standard version, accessories quoted separately. Price and delivery time on request.

Overview Tunnel pasteurizer for the continuous thermal treatment of filled cans and bottles by water spray. The tunnel is built in a U-shape: infeed and outfeed sit on the same end of the machine, so the line returns to the operator side and the footprint stays compact at 6.2 m² of working area. The treatment length is divided into eight zones – three heating zones, one pre-pasteurization zone, one pasteurization zone and three cooling zones – with energy recovery between the zones, so heat taken out of the cooling side is fed back into the heating side. Heating is by steam through a plate heat exchanger mounted on the side of the tunnel. Product enters at +10 °C, is held at +70 °C for 10 minutes in the pasteurization zone and leaves at +37 °C; the full cycle takes 41 minutes. Tunnel body and electrical cabinet are built entirely in AISI 304 stainless steel. Control is by Siemens ...

Overview This KOSME FLEXA 15/720 P3 MM is a rotary labelling machine for pre-cut labels, built in 2013. It carries two wet-glue labelling stations, and a third station adds hot-melt labelling, so one machine covers several labelling tasks. It suits bottlers who work with pre-cut labels and need to switch between different labelling jobs. Bottles enter and leave the labelling carousel via infeed and outfeed starwheels, guided through the carousel by container plates and top centring bells. Brush units and side pressing belts in the outfeed area press the labels on. The machine is fully enclosed by transparent safety doors and panels and is operated from a KOSME touch panel that shows machine and production data. The machine is set up with 4 formats, covering containers from 400 to 450 g/ml, and reaches an output of up to 15,000 bottles per hour. Technical data Manufacturer: KOSME Model: F ...

Overview This KOSME DEPACK B B1F A/67-Rf is a depalletizer for empty containers such as blown bottles, built in 2013. It takes containers delivered in several layers on pallets, removes them layer by layer and transfers them to the downstream machine in the line. It handles containers from 100 to 500 ml at up to 13,000 containers per hour. Full pallets run in on pallet chain conveyors, a gantry-type depalletizing head clears the layers and removes the tier sheets. The machine is enclosed by safety fencing with light curtains and access protection. It is controlled by a Siemens PLC from a separate control cabinet outside the machine and operated from a KOSME touch panel. The machine is format-dependent, with several formats set up. Technical data Manufacturer: KOSME Model: DEPACK B B1F A/67-Rf Year of manufacture: 2013 Machine type: depalletizer for empty containers Output: up to 13,000 c ...

このシステムは、可動式エアノズル(純粋なフィルタ ー)を使って、充填前に空の容器・容器・ボトルを自 動的に洗浄します。KOSME JET CLEAN G 16/960 1T UPは、空の容器を(頭上に回して)回転させ、可動ノズ ルでろ過済みの空気を吹き込み、緩い粒子や不純物� ��除去します。この機械は、容器から充填システム� �入る前に緩んだ堆積物を除去するために使用されま す。 容量:最大6000本/時 寸法:2500 x 2500 mm 機械重量:1600 kg 接続:3×400V、N、50Hz 空気圧:6バール 水圧:3バー�

デパレットタイザーはパレットや多層コンテナ(例:� �き瓶やボトルブランク)を輸送コンテナに分離し、� �の接続された機械まで移動させます。 容量:13,000 b/h 管理:シーメンス 接続:3×400V、N、50Hz 防護クラス:IP 54 電力(電化):27 kW 電流:49 A 状態:よく手入れされており、完全に機能している 利用可能:2026年第43週よ�

Overview H&K (Holstein und Kappert) SVF 120-D rotary can filler, built in 1991, with 120 filling valves for can format 211/202. Rated output is approx. 80,000 cans per hour with standard 330 ml cans. The filler is supplied together with an Angelus 121 L can seamer from 1991, the rinser that ran with it, and the filler platform. It is controlled by a Siemens S7-400 PLC. The machine is already dismantled and ready for loading. Technical data Manufacturer: H&K (Holstein und Kappert) Model: SVF 120-D Year of manufacture: 1991 Machine type: rotary can filler Filling valves: 120 Can format: 211/202 Output: approx. 80,000 cans/h (330 ml) Power supply: 380 V, 50 Hz, 3/N Rated current: 24 A Control voltage: 24 V DC PLC: Siemens S7-400 (CPU 416-2) Scope of delivery Can filler SVF 120-D with 120 filling valves and can lift cylinders Can seamer: Angelus 121 L (202), year 1991 Can rinser operated tog ...

Overview This SMI SK 452 T is a shrink packer for PET bottles, built in 2002 by SMI (Italy). It collates bottles into pack formations, wraps them in shrink film and shrinks the film in the integrated heating tunnel, at an output of up to 30,000 bottles per hour. It handles 0.5 l, 0.75 l, 1.0 l and 1.5 l bottles in 3x2 packs and 0.5 l bottles in 4x3 packs, and has a pass-through mode for running bottles unpacked. The wrapping section is fully enclosed by safety guarding with viewing windows. The machine has been running as the shrink packer of a PET bottling line for water and is still installed and under power, so it can be inspected in production. Technical data Manufacturer: SMI (Italy) Model: SK 452 T Year of manufacture: 2002 Machine type: shrink packer for PET bottles with integrated heating tunnel Output: up to 30,000 bottles/hour Pack formats: 0.5 l (3x2 and 4x3), 0.75 l (3x2), 1. ...

Overview This Twin Pack handle applicator, built in 2002, applies carry handles to PET bottle multipacks. It comes from a mineral water packaging line of the same year with an output of 20,000 - 30,000 bottles per hour depending on format. The machine is still installed and under power and can be inspected on site. Technical data Manufacturer: Twin Pack Year of manufacture: 2002 Machine type: handle applicator for beverage multipacks Line output: 20,000 - 30,000 bottles/h depending on format Line formats: PET bottles 0.25 l, 0.33 l, 0.5 l, 0.75 l, 1.0 l and 1.5 l Control: Siemens text operator panel Equipment Handle application unit with tape reels on a blue steel frame above the pack conveyor Control panel with separate start, stop and reset for the front and rear sections, emergency stop Guarded enclosure with transparent doors Condition Still installed and under power. An inspection o ...

Cylindroconical 965 hl fermentation and storage tank - designed for cooling with ammonia (can also be cooled with glycol), 1 x cone cooling, 3 x frame cooling - Swivel cone - stainless steel - insulated - Stand frame, short - Cleaning air fitting with safety valve - Vacuum valve 5 tanks, also available individually or in partial quantities., Additional title: Outdoor tanks for storing fluids; years of manufacture 1988 - 1991, Capacity: 96450 l, Operating pressure: 2 bar, Length: approx. 12400 mm, Width: approx. 3950 mm, Height: approx. 3950 mm, Weight: 6220 kg, Material: Stainless steel 1.4301, Position: vertical, Base construction: short supporting skirt, Features: 7 tanks; Cooling: 1 x cone cooling jacket, 3 x side wall cooling jacket; swivel cone; insulation; dearation and cleaning combination; safety valve; vacuum valve; temperature measurement

システムは湿接着剤プロセスで2つのモジュールにラ ベルを付け、さらにホットグルーで3つ目の追加モジ ュールを使ったラベル付けが可能です。 寸法:約3.80m x 3.00m ラベルメーカーは1時間あたり最大15,000本の生産を達 成しています。 状態:稼働中、完全機能 機械寸法(L×W):3800 x 3000 mm 出力:最大15,000 bpm アレンジメントによる視�

ボトリングラインは以下のもので構成されています: 1. デパレット/デパレット 製造元:パック・ウント・パレット技術者 ルドルフ・シュタインレ・ゲルストホーフェン GmbH タイプ:ラピッド-EK 製造年:1993年 空気圧:6バール 接続:220/380 V、50 Hz 制御:24V DC 2. 開封者 製造元:ラデンスカ&シュタインレ(RS) タイプ:ARO-P3 製造年:1995年 空気圧:6バール 接続:380 V、50 Hz 出力:3 kW 3. クレートウォッシャー 製造元:ラデンスカ&シュタインレ(RS) 機種:SPN-2S 製造年:1995年 接続:380 V、50 Hz 出力:8 kW 4. ボトル洗い機 製造元:Schymanski GmbH(MAG) タイプ:SIRIO 8-24 建設年:2000年 接続:400 V、50 Hz 5. ボトル検査官 製造元:miho Inspektionsysteme GmbH タイプ:デイビッド メイクの年:2 ...

Krones VarioFlash Bは、熱製品処理用の高効率フラッシュ殺菌器です。 この薬は、ビール、ミックスビール飲料、ワイン、� ��プリッツァーの微生物学的に安全な充填のために� �別に開発されています 性能範囲:ファミリー全体で1,800〜60,000リットル/時を カバーします。 2019年に発表された小型バリアントは、出力範囲18〜4 5ヘクトリットル/時(1,800〜4,500 l/h)に最適化されています。 コンパクトな設計: 小型バリアントのKZE工場全体は、1つのコンテナに収 まる寸法になっています。 これにより、現地での輸送、設置、試運転が格段に� ��易になります。 穏やかな保存: スライド式PE制御システム(殺菌ユニット)と適応され た温水回路を備え、ビールは非常に穏� ...

Overview This is a complete automatic KEG line for stainless-steel kegs, built in 1990 by Leifeld & Lemke and continuously extended and modernised over its service life. It covers the full cycle from empty-keg infeed and centring through external washing, internal cleaning, filling and full-keg checking to automatic palletising. According to the seller it runs at up to 130 kegs/h in the 30 L format in three-shift duty. Control is by Siemens SIMATIC PLCs of mixed generation (see Condition). Technical data Manufacturer (line builder): Leifeld & Lemke Year of manufacture: 1990 (continuously upgraded since) Machine type: complete automatic KEG cleaning and filling line Capacity: up to 130 kegs/h at 30 L (seller-stated) Keg formats: 20 L, 30 L, 50 L, basket fitting (Korbfitting); no slim kegs Control: Siemens SIMATIC S5 and S7-300 (mixed generations) Scope of Delivery Empty-keg infeed with ce ...

Overview GEA Procomac Opera palletizing unit from 2009, sold as a complete end-of-line group: low-level infeed palletizer with all pallet conveyors, pallet magazine, mother pallet station, Robopac stretch wrapper and Logopak pallet labelling. The Opera is a low-level infeed palletizer for low to medium production capacities, with automatic changeover for different pallet patterns and pallet sizes. Still in production in Germany until October 2026. Technical data Year of manufacture: 2009 Design: low-level infeed palletizer Changeover: automatic, for different pallet patterns and pallet sizes Output range: low to medium production capacities Handled at the site: shrink-wrapped PET bottle packs Pallet handling: infeed and discharge pallet conveyors, pallet magazine, mother pallet station Machine guarding: mesh safety fencing with access gates around the cell Scope of delivery GEA Procomac  ...

Homogeniser for oat milk, Additional title: High pressure pump , Performance: 5500 l/h, Max. pressure: 200 bar, Power: 45 kW, Length: 1050 mm, Width: 1600 mm, Height: 1400 mm, Weight: 2500 kg