粉砕機 中古 販売のため (2,509)

grinding diameter:600 mmgrinding length:3000 mmcentre height:315 mmworkpiece weight max.:3000 kgwork piece spindle speed:8 - 120 U/mingrinding wheel motor:25 kWgrinding wheel speed:45 m/secgrinding wheel width x diameter:750 x 80 mmtable speeds:30 - 4500 mm/minfeeds of grinding head:0 - 5 mm/mintable swivelabel +/-:7,5 °total power requirement:55 kVAweight of the machine ca.:18 tdimensions of the machine ca.:11,5 x 4 x 2,2 m- Internal grinding device- taper grinding up to 10,1° based on diameter- automatic grinding cycle- grinding wheels and flanges- dressing device- coolant attachment- dust exhauster, various steady rests

grinding length:600 mmgrinding width:300 mmworkpiece height:450 mmtotal power requirement:8 kWweight of the machine ca.:2,2 tdimensions of the machine ca.:2,8 x 3,0 x 2,0 mgrinding spindle speed:1440 / 2905 U/minwith magnetic plate 600 x 200 mmautom. vertical feed coolant attachmentTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2024, Josef Weber. All rights reserved.

grinding height:-- mmgrinding width:220 mmgrinding wheel diameter:762 mmtotal power requirement:90 kWweight of the machine ca.:13 tgrinding spindle 1 drive::37 kWgrinding spindle 2 drive::37 kWGrinding machine for pre-grinding the connecting rodWith 2 replacement spindle motors

grinding diameter:380 mmgrinding length:1000 mmcentre height:180 mmgrinding wheel diameter:400 mmmax. workpiece weight between centres:250 kgtotal power requirement:10 kWweight of the machine ca.:4,1 tdimensions of the machine ca.:3 x 2 x 1,6 mwith internal grinding attachmentwith fixed and swivelling headstockwith coolant tank

grinding diameter:600 mmgrinding length:3000 mmcentre height:300 mmweight of the machine ca.:11,8 tdimensions of the machine ca.:7100x2300 mmspindle turning speed range:14 - 220 U/mingrinding wheel diameter:650 mmgrinding wheel flange for width 25-40 mm:3 Stk.open tailstocks:3 Stk.chuck:Ø310 mmfixed steady:320 mmDistance between center: 3000 mm.Height of centres: 300 mm.Spindle speed: (n°12) 14 - 220 RpmMax grinding diameter: 600 mm.Stroke the wheelhead:(rapid) 50 mm.Stroke the wheelhead:(rapid+ micrometrical): 1 5 500 m mmm. .Max grinding wheel diameter: 650 mm.Max tilt table: 3° 30'Total absorbed power: 27,7 HpDimension: 7100x2300 mm.Weight approx: 11800 Kg.

grinding diameter:300 mmgrinding length:600 mmcentre height:190 mmz-axis:865 mmx-axis:250 mmclamping length:1000 mmperipheral speed:45 m/secgrinding slide swivable +/-:8 °grinding wheel width x diameter:80 x 508 mmwork piece spindle speed:1 - 800 U/minweight of the machine ca.:5 tMachine with SIemens 840 C control- coolant device- Marposs measuring device

workpiece diameter:5-125 mmgrinding depth:50-1000 mmclamping length:1000 mmtotal power requirement:1.9 KVAweight of the machine ca.:630 kgmax. workpiece weight:100 kgCenter Hole Grinding Machine.Workpiece must be rotated by machine during grinding

grinding length:450 mmgrinding width:250 mmworkpiece height:280 mmTable area:760 x 250 mmgrinding spindle drive:2,5 kWgrinding wheel dia. x width:250x 25 mmgrinding spindle speed:1430/2900 U/minway of grinding spindle saddle, vertical:400 mmtotal power requirement:4,5 kWweight of the machine ca.:1,8 tdimensions of the machine ca.:1,8 x 1,4 x 2,0 mMachine equiped with magnetic plate- dresser

grinding length:450 mmgrinding width:250 mmworkpiece height:280 mmTable area:760 x 250 mmgrinding spindle drive:2,5 kWgrinding wheel dia. x width:250x 25 mmgrinding spindle speed:1430/2900 U/minway of grinding spindle saddle, vertical:400 mmtotal power requirement:4,5 kWweight of the machine ca.:1,8 tdimensions of the machine ca.:1,8 x 1,4 x 2,0 mMachine equiped with magnetic plate- dresser

honing diameter:51 mmstroke:300 mmspindle speeds::600 - 3000 U/minfeed range:1500 - 5000 mm/minspindle drive:1,1 kWweight of the machine ca.:0,8 ttotal power requirement:4 kWdimensions of the machine ca.:1,1 x 1,9 x 1,5 m

grinding length:1250 mmgrinding width:600 mmworkpiece height:730 mmtable surface area:1720 x 500 mmheadstock: dist. table - spindle center:900 mmmax. longitudinal movement:X-1450 feed range:10 - 20.000 mm/minvertical movement:Y-730 mmfeed range:0,2 - 3.000 mm/mincross travel:Z-550 mmfeed range:5 - 5.000 mm/minpower capacity:1500 U/min.- 44 kW / 8000 U/min. - 38 kW kW grinding wheel turining speeds:50-6.000 U/mincutting speed:max. 80 m/sec.weight of the machine ca.:11 twith CNC SIEMENS 840 Cauto. dynamic balncing system integrated in the grinding conusprofile grinding unit ( on table mounted ) Diamant profile rollers ( dia. max 140 mm , width max. 200 mm, hole 52 H3 ) speed 3000 rpmtwo magnetic plates ( 1000 x 400 mm, 1200 x 350 mm ) divers Flanges ect.

Machine number: 607Strip width: 150 mmReference: Lebtig - Lot 47 Auction-ID: A7-49882-223

: gebraucht : 2006 : 5539 : prompt, Zwischenverkauf v : Taiwan : 55100 €: 1 : 49600 €: 1000 mm: 850 mm: 1000 x 610 mm: 1000 x 600 mm: 1000 mm: 5 - 25 m/min: 1250 mm/min: 3 - 32 (0,02) mm: 690 mm: max. 400 mm/min mm: 400 mm/min: 0.001 mm: 1450 1/min: 11 kW: 3.7 kW: 0.37 kW: 20,6 kW: 3700 mm: 4000 mm: 3250 mm: 4800 x 2830 x 2800 mm: 7400 kg: 1500 kg: 1120 kg: 1500 kg: 355 x 75 x 127 mmServo drive for grinding wheel feed, hardened and grounded slide waysGrinding wheel spindle on 6 high precision angular contact bearingsElectro-magnetic chuckCoolant equiptment with aut. paper filter and magnetic separatorOver the wheel automatic dressing device (with automatic compensation)Grinding wheel withgrinding wheel flangemachine lampMachine and equipment according to the CE-regulationsUser manual in ENGLISHNew grinding spindle, spindle bearings, grinding wheel andgrinding wheel flangeBuying used  ...

wheel diameter: 300 mmgrinding wheel width: 50 mmno. of working stations: 2 Stückturning speed range - stepless: 1.450 / 2.900 U/minvoltage: 400 Vtotal power requirement: 1,6 / 22 kWweight of the machine ca.: 130 kgdimensions of the machine ca.: 1,10 x 0,50 x 1,30 m! ATTENTION ! EXCELLENT CONDITION !This machine comes from a vocational school!- Serial No.: 090303004 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

wheel diameter: 300 mmgrinding wheel width: 50 mmno. of working stations: 2 Stückturning speed range - stepless: 1.450 / 2.900 U/minvoltage: 400 Vtotal power requirement: 1,6 / 22 kWweight of the machine ca.: 130 kgdimensions of the machine ca.: 1,10 x 0,50 x 1,30 m! ATTENTION ! EXCELLENT CONDITION !This machine comes from a vocational school!- Serial No.: 090520004The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double bench grinder: Grinding grit: 36 and 80 Grinding wheel diameter max. 200 mm Grinding wheel width 32 mm Mounting diameter 30 mm Connection voltage 230 V Motor power 0.9 KW Condition: never used / new (5) Auction-ID: A7-49782-602

Surface Grinding Machine - Magnetic plate - Coolant system with filter Grinding length 600 mm Grinding width 400 mm Workpiece height 525 mm Table clamping area 960 x 400 mm Grinding wheel dimensions 350 mm Magnetic plate 600 x 400 mm Grinding spindle speed 3000 rpm Table load 1100 kp Total power requirement 8.0 kW Machine weight approx. 2.1 t Space requirements approx. 2.4 x 1.9 x 2.1 m Auction-ID: A7-49782-434

Working parameters: Industrial column reel for sharpening, grinding and polishing operations. Auction-ID: A1-50001-10

Grinding range 2 - 13 mm Sharpening angle min./max. 90 - 140 degrees Connected load 230 V Machine weight approx. 10 kg Space requirement approx. 0.35 x 0.2 x 0.2 m Condition: never used / new (5) Auction-ID: A7-49782-489

Working parameters: Manual industrial machine for sharpening and grinding cutting tool profiles. Equipment included: vertical grinding wheel with protective housing, adjustable tool holder, work table, manual movement and adjustment via handwheels, coolant/cooling device and metal protective screen. Notes: Robust construction on metal frame. Auction-ID: A1-50001-52

Disc diameter 300mm Disc width 40mm Speed 1500rpm Power: 1.1KW see pictures Condition: unchecked (6) Auction-ID: A7-49782-604

Drill Bit Grinding Machine: Additional station for grinding back the drill cutting surface (clearance angle) 25tk. collets ER 40 are included in the scope of delivery, These are also suitable for clamping intermediate sizes. For grinding twist drills made of HSS and Tungsten carbides with a TiN layer of 8 - 32 mm. Rotor with precision ball bearings guarantees smooth running. Vibration-free running due to high weight and rubber feet. Sharpening angle adjustable for all common twist drills. Packaging Dimensions: 430 x 240 x 240mm. Weight 16Kg. Grinding range 8 - 32 mm Sharpening angle min./max. 90 - 140 degrees Connection voltage 230 V Condition: never used / new (5) Auction-ID: A7-49782-456

Tape 150 x 2000mm Motor 3.0 KW Speed 2800rpm Auction-ID: A7-49782-652

Power: 6 kWWorking parameters: grinding length 4000 mm; feed rates 7 m/min and 14 m/minEquipment included: long magnetic table, movable grinding head, coolant, grinding wheel and magnetization controlsPower supply: 380 VRemarks: Machine no. 1059 76. Auction-ID: A1-50001-7

Year & Manufacturer: 2013 – UT. MA S.r.l.Power: 3.2 kWPower supply: max. current consumption 11 AEquipment included: operator interface, hand controls, pneumatic system with regulators/pressure gauges and solenoid valves, work area lightingNotes: Serial No. 149. Industrial automatic grinding machine with motorized axes, closed work enclosure and electronic control. Auction-ID: A1-50001-3

Year & Manufacturer: 2006 – UT. MA S.r.l.Power: 3.2 kWPower supply: max. current input 11 AEquipment included: X, Y, Z and A axes, pneumatic system with regulators, pressure gauges and solenoid valves, Schneider Electric/Telemechanical frequency inverters, integrated control cabinet, auxiliary filtration/recovery systemRemarks: Serial No. 060. Refurbished machine, with closed working enclosure, motorized axes and electronic control. Auction-ID: A1-50001-4

Industrial grinding machine for sharpening circular saw blades, equipped with manual mechanical adjustments. Working parameters: Blade diameter shown on the table: 80 to 350 mm; cutting angles indicated: 15°, 18°, 20°, 25° and 30°. Equipment included: Grinding wheel with protective guard; manual adjustments by handwheels and levers; blade positioning system. Manufacturer: HELLERRemarks: S.u.S. Schleif- und Schärfbetrieb GmbH plate visible on the machine. Auction-ID: A1-50001-16

Grinding wheel diameter 300mm Speeds 30 / 35m/sec. Motor 1.5KW new electrical engineering incl. 9 new grinding wheels see pictures Auction-ID: A7-49782-658

Set of two OREGON electric chain grinders on benchtops, intended for sharpening chainsaw chains. Equipment included: 2 units; abrasive wheels; chain holding and positioning vices; manual sharpening angle adjustments; tilting sharpening heads; manual controls and adjustments. Auction-ID: A1-50001-15

Working parameters: Universal manual grinding machine on a rack for tool sharpening. Equipment included: longitudinal table with T-slots, swivelling tool head, spindle/grinding wheel with protective housing, manual adjustments via handwheels, visible dial dial and pneumatic device. Notes: Industrial cast iron construction. Auction-ID: A1-50001-5