飲料機械 中古 販売のため (2,118)

追加タイトル:年約:主に2003年、完成麦汁:15000リット� ��、粒数:2500kg、電流:三相交流電流、電圧:400 V、周波数:50 Hz、特徴:ラウタータン、低圧調理用銅渦巻きシステ� ��(外部麦汁煮沸システム付き)、追加の渦巻き、トラ ブ収集装置、ホップ投与量、周辺設備:ラウター麦汁 加熱器、蒸気凝縮�

各種継手を備えたステンレス製ラウタータン、追加� ��イトル:ステンレス製の醸造容器、総容量:30000リッ� ��ル、面積約15 m²、特定偽底荷重:165 kg/m²、フレーム高さ:2 m、素材:ステンレス製、特徴:出口ベントブラケット� ��入口ドーム(DN600)、点検ガラス(DN600)、CIP警告灯、ド ア安全スイッチ、室内照明セット(IP54)

屋外設置用の断熱付きワールプール、追加タイトル: トラブ除去、容量:18200リットル、容積純量:15000リッ� ��ル、高さ:1700mm、高さシリンダー:2000mm、材料:ステ� �レススチール1.4301(AISI 304)、位置:屋外、ベース構造:円筒形容器、特徴:断熱 材(100mmミネラルウール)

This pressure vessel from Werk Steinecke is a robust and reliable solution for use as a buffer tank in breweries and beverage processing plants. With a capacity of 178 hl and an operating pressure of 4 bar, it is ideal for intermediate storage and process buffering. The tank is designed for horizontal installation and features a solid industrial construction. It is equipped with a DN80 connection and can be fitted with the desired additional fittings from the available stock after consultation. A reliable and cost-effective solution for expanding or upgrading your production system. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: puffer tank, Capacity: 17800 l, Working pressure: 4 bar, Length: 4,8 m, Width: 2,4 m, Height: 3 m, Weight: 2000 kg, Material: stainless steel, Position: horizontal, Features: DN80 , Periphery: After consultation, we can equ ...

Carbonation system with integrated buffer tank, for the production of CO2-containing mineral water., Additional title: impregnation plant, Capacity: 20000 l/h, CO2 content: 12 g/l, CO2 carbonisation pressure: 7 bar, Max. tank pressure: 8 bar, Current: 69 A, Voltage: 230/400 V, Frequency: 50 Hz, Heating / Cooling: Connection pressure steam: min. 0.5, max. 1 bar, Water: Connection pressure: min. 4, max. 5 bar, Compressed air: min. 7, max. 10 bar, Length: 2 m, Width: 2,4 m, Height: 2,5 m, Weight: 4000 kg, Operation / Control: Siemens Simatic S5, Features: Saturation Tank (content = 750 l) with fill level detectors as a carbonisation tank, measuring writer (ABB), circulating pump (Hilge), various ventils

Rotary machine for capping swing-top bottles, Capacity: 18000 bottles/h closing heads: 24 pieces, Power: approx. 5 kW, Water: approx. 200 l/h, Compressed air: approx. 2 cbm/h, Length: 3,3 m, Width: 2,2 m, Height: 2,4 m, Weight: 3000 kg, Formats: 0,33 l; 0,5 l; max. bottle diameter 90 mm, Running direction: right - left, Material: Stainless steel, wear-resistant plastic, Base construction: miniaturized, hygienic machine table in outward beveled design, Features: mechanical / pneumatic control device (testing of bow clamping), central lubrication, height adjustment for processing of different bottle heights, rinsing and swelling device, high-pressure injection device, HDE injection nozzle at the discharge table, Discharge table, pusher station, without control cabinet

This used crate washing machine from Klann GmbH is a robust and efficient solution for cleaning beverage crates with a capacity of up to 1,000 crates per hour. The machine has 50 adjustable flat jet nozzles that ensure thorough and reliable cleaning results. With a circulation capacity of approx. 300 hl/h at 5 bar, this device offers powerful cleaning performance combined with efficient operation. Thanks to its compact design, it can be easily integrated into existing production lines. A solid and cost-effective choice for breweries and beverage manufacturers looking for a proven solution for crate cleaning. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: Box spraying, Capacity: 1000 crates/h, Circulating capacity approx.: 300 hl/h at approx. 5 bar, Compressed air: approx. 2,2 m³/h, Length: approx. 3,80 m, Width: approx. 1,1 m, Height: approx. 1,4  ...

A complete - with a production capacity of approx. brew is for sale. The brewhouse comprises a mash tun, mash kettle, lauter tun, and wort kettle. The system was modernized and rebuilt several times between 1990 and 2001, resulting in a combination of traditional copper construction and modernized stainless steel components. The brewing vessels are robust and efficient in design: the mash tun and lauter tun are made of copper, and the wort kettle also has a copper core with stainless steel inner lining and an integrated inner boiler. The mash tun is made of stainless steel (1977). The equipment also includes a pan vapor condenser, wort cooling, plate cooler, and peripherals such as a spindle station, wort pumps, drain pump, and hot water tank. The CIP system allows for convenient cleaning of the wort kettle, including two 20 hl containers for lye and acid; the remaining vessels can ...

Water degassing (deareation) system for removing oxygen from drinking water, mainly built in 1995. The system operates using a two-stage cold degassing process involving counter-current stripping with CO₂ and consists of the following components: - 2 degassing vessels connected in series - Vacuum pump with separator - Centrifugal pumps - CO2 dosing via needle valve - Pipe panel, various pipework, valves, fittings, measurement and control technology - Control cabinet with Simatic S5 control system, Additional title: cold degassing via CO2-Stripping, Capacity: 20000 l/h, Gross volume deareation vessels each: 285 l ; overpressure up to 1 bar, Gross volume buffer tank: 7060 l ; overpressure up to 4 bar, Residual oxygen content appr.: 0,010 - 0,015 mg/l, Operation / Control: Simatic S5, Material: stainless steel, Position: mounted on stainless steel frame with feet, Features: 2 x degassing  ...

Overview  This rinser-filler-capper bloc was manufactured in 2003 by Kosme. The bloc is designed for filling carbonated and non-carbonated beverages in PET bottles. It includes a rinsing machine with 2 channel and an isobaric filler with integrated capper for plastic screw caps. The machine is currently available promptly, and further information is available upon request. Technical data  Capacity: 10,000 bottles per hour Formats: 1,0 l PET bottles 0,5 l PET bottles 0,33 l PET bottles Working direction: Clockwise Rinsing system: 36 rinsing nozzles 2 channel rinser With stainless steel pipes Filling system: Isobaric system 36 filling valves Capping system Manufacturer: Arol 9 capping heads With 2 cap chutes, 1 for 28 mm plastic caps, 1 for sport caps Dimension Approx. 4.100 x 3.000 x 4.000 mm Scope of Delivery  Rinser, filler, capper in triblock construction Vacuum barrier system Stain ...

Overview  This packaging machine was manufactured in 2006 by the German company Krones. The machine is designed for wraparound cartons, with the blank fed from above, bottles grouped in sixes, and sealed from below with hot glue. The machine has a full stainless-steel construction, only 1,677 operating hours and is immediately available. Technical data  Capacity: 30,000 bottles/h (0.33 L, 6-packs) Formats: Closed 6-packs, bottle Ø 61.5 mm, height 217 mm Formation of packs: 2×3 (six-pack wraparound) Operating hours: 1,677 Construction: Full stainless steel Glue type: Hotmelt Scope of Delivery  Wraparound packer | Krones | Solidpac | 2006 Infeed conveyors for bottle supply and dividing system  

Reusable bottle line for filling beverages into 0.5 l and 0.33 l glass bottles. The filling line comprises the following components: - Uncorker (Rink, 1995) with 2 uncorking heads - Unpacker (Albert Frey) with 2 unpacking heads - Crate washer (Göbel, 1971) for cleaning using spray nozzles - Bottle washing machine (GM Gera, 2007), single-end machine - Empty bottle inspector (Krones, 2016) for checking the base, side walls, neck and residual liquid - Glass bottle filler and capper (Krones, 2002), short-tube counter-pressure filler with 40 filling valves and capper for crown caps - Labelling machine (Krones, 1995) for wet glue labelling - Date coding (Domino, approx. 2010 – 2017), inkjet printer - Fill level, label and cap inspector (Syscona, 1997 – 2008) - Packer (Albert Frey, 2002) with two packing heads - Palletising system (ABB, 2014) with articulated arm robot - Conveyor belt syst ...

概要 スイングトップクロージングマシンは、オーストリ� ��のAMSによって2005年に製造されました。現在の所有� ��はスイングトップクロージャーの使用をやめるこ� �を決めたため、この機械は販売中です。現在もこの マシンは醸造所に設置されています。書類は入手可� ��です。技術仕様:容量:12,000 bph 制御:シーメンスS7 フォーマット:0.3 l 0.5 l クロージングポジション数:16 資料あ�

2-vessel stainless steel brewhouse (beraplan, 1997), mounted on a stainless steel frame with a work platform. The brewhouse comprises the following components: - Mash/wort kettle, steam heated, with propeller agitator, mashing nozzle, CIP head and 4 hop dosing hoppers. - Lauter tun with slotted false bottom, rake, spray heads and spent grain pump - Whirlpool as a separate stainless steel vessel (gross volume: 48 hl, manufactured by C. Gresser, 1978) - Two-stage plate heat exchanger (GEA Ecoflex) used as a wort cooler with wort aeration - Spindle station - Control console (Siemens) with buttons and screen for visualising the brewing process. - Control cabinet with S5 module and various other control and regulation elements. - Various other pipework, pumps, valves, measurement and control technology, Additional title: Stainless steel brewhouse with a wort discharge capacity of 35 hl, built ...

概要 この圧力充填機は2013年にドイツのメーカーKHSによっ て製造されました。この圧力充填剤は現在もドイツ� ��大規模な醸造所で使用されており、いつでも検査� �能です。 技術データ 容量:22,000 - 65,000 bph 給油所数:168 キャップステーション数:24 ピッチサークル充填:5040 mm 供給範囲 バルブノード 真空ユニット 衛生的な入口 充填レベルおよび閉鎖検査 拒否および拒否ベルト 技術文書 プログラムバックアップを含む 豊富な輸送車が利用可能で、追加で購入可能で�

2基の水平ステンレス製圧力タンクがあり、それぞれ 冷却コイルと視鏡が装備されています。タンクには� ��り付け用のフレームが付属しています。追加タイ� �ル:水平冷却可能なステンレス製圧力タンク、容量� �器容量:1200 l、容量冷却コイル:4 l、最大過圧:3バール、最大作動温度:30°C、長さ:2700 mm、幅:900 mm、高さ:900 mm、素材:ステンレススチール 1.4301(AISI 304)、位置:水平、ベース構造:それぞれサドルフレー� ��上、 特徴:冷却コイル、サイトグラ�

Overview  The empty bottle inspector was built in 2004 by the German manufacturer Krones. It is installed in a mineral water company in Germany. On the line, where it is installed, the owner also does contract bottling. Therefore it has many detections and formats available. Technical details  Output: up tp 50,000 bph Last used for:  0,25 l Vichy bottle 0,5l Set 1 0,5l Set 2 0,5l Set 3 0,7l GDB 0,75l GDB Inspection modules Bottom inspection camera Sealing surface inspection camera Thread inspection camera with cone optics Side wall inspection camera Contour detection and color detection with camera Accessories/scope of delivery    Ejector some spare parts available some conveyors

This used keg filling system from m + f KEG-Technik GmbH & Co. KG (built in 1989) is a reliable solution for cleaning and filling kegs with a capacity of up to 30 kegs per hour. The machine is equipped with two heads for filling and cleaning as well as two CIP tanks, ensuring efficient and consistent operation. It supports flat and basket formats and is controlled via Siemens S5. Thanks to its robust construction and compact design, this system is ideal for breweries or beverage manufacturers looking for a proven and cost-effective solution. Our team at VBW Asset Trade will be happy to answer your questions., Capacity: 30 Keg/h , Pressure: 5 bar, Length: 2,40 m, Width: 1,90 m, Height: 2,10 m, Weight: 400 kg, Formats: flat- and basket-fitting, Operation / Control: Siemens S5, Features: 2 heads (both filling and cleaning), 2 CIP- vessels

Inspection machine for checking empty glass bottles prior to filling. The base, sides and neck of the bottle are inspected. Bottles containing residual detergent from the cleaning process are also detected. An additional inspection unit is positioned upstream of the main inspector, which screens out foreign and defective bottles in advance. The inspection criteria are recorded using cameras as well as RF and IR technology., Additional title: Empty bottle control, Capacity filline line: 12000 bo/h, Current: 6 A, Voltage: 400 / 230 V, Frequency: 50 Hz, Running direction: left -> right, Operation / Control: Simatic S7, Position: in a footed housing, Base construction: straight-running, Features: Control and display panel, housing with safety doors, bottle discharge

Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  Capacity: 36,000 bph at 1.5L water 35,000 bph at 1.5L soft drinks (sweet) 32,000 bph at 1.5L soft drinks (light) Formats: 0.5L and 1.5L bottles PCO 28-1881 closure Filling product: Water and carbonated soft drinks (7.5g CO₂) Closure system: Screw caps, fed via chute and tipper (Zalkin + NSM) Packing: Shrink pack: 3x2 bottles (double lane) Pallet type: Eur ...

Westfalia Separator, last used in a fruit juice plant. The separators control system was modernized by GEA. The product is clarified in the centrifuge bowls and conveyed further under pressure. Solids collect in the solids chamber and are periodically discharged automatically. During CIP cleaning, the cleaning fluid is pumped in a circuit., Additional title: Disc centrifuge, Intake capacity: 22000 l/h flow rate for fruit juice approx. 4,000 l/h, Drum velocity: 6500 rpm, Density liquid phase: 1 kg/dm³ , Density solid phase: 1.4 kg/dm³, Power: 18.5 kW, Current: 37 A, Voltage: 380 V, Frequency: 50 Hz, Length: 1485 mm, Width: 850 mm, Height: 1470 mm, Weight: 1200 kg, Material: Stainless steel surfaces that come into contact with the product, Position: on a 685 x 585 mm foundation, Features: Drum, drive, inlets for product and displacement fluid, control water inlet with solenoid valve, dra ...

Overview The labeler was manufactured in 2012 by the German manufacturer Krones. The machine was regularly maintained by OEM and is still in operation till early 2027. As the selling mineral water company is receiving a completely new bottling line, they are selling the used machines of their current line, which are still in good shape. With the two labelling stations, the machine can label front, back and neck. A date coder is included and installed on the machine. Technical Details Output: 20,000 bph Formats: 0,25l Vichy 0,5l 0,7 and 0,75l GDB and Schlegl Pitch circle diameter: 600 mm No servo drive of the plates Infeed and output direction 90° Rotation: counter clockwise 36,000 operating hours Glue pumps included working direction: counter clockwise

冷却ジャケット、サイトグラス、出口パイプ、圧力� ��を備えた水平ステンレス製圧力タンク、追加タイ� �ル:水平冷却可能なステンレス製圧力タンク、容量:1 050リットル、最大作動過圧:3バール、長さ:2300 mm、幅:860 mm、高さ:860 mm、素材:ステンレススチール、位置:水平、特徴:冷� �ジャケット、排気管DN50、サイトグラス、圧力�

Combination Kieselguhr and Sheet filter. Stationary sheet filter with square filter elements in vertical row arrangement. Hydraulic filter layer compression. Control of hydraulics from built-in electrical panel., Additional title: Kieselguhr and sheet filters as a combination design; years of construction 1979, Capacity approx.: 380 hl/h Combination filter - filtration area approx. 76 - 108 m² KG; 180 - 253 m² Sheet with beer filtration, Operating pressure: 8 bar , Power: 6 kW, Voltage: 220/380 V, Frequency: 50 Hz, Length: 10100 mm, Width: 1320 mm, Height: 1750 mm, Formats: square filter elements, Operation / Control: built-in control panel, Material: Stainless steel, Position: Horizontal, Base construction: Frame, Features: Filter plates; Filter frames; collection tray with removal screw; hydraulik filter plate compression; hose pump, Layer patterns: vertical row arrangement

CIP system with 5 tanks (one of which is insulated). Additional components: - Each tank is fitted with sampling taps, a ladder frame, a manhole on the top, pneumatic valves and level probes - Shell-and-tube heat exchanger for heating water, which is then fed into the CIP tanks - 3 x dosing pumps (Grundfos) - CIP feed pump (Hilge) - In-line measurement of temperature and conductivity - Pipe panels as well as various pipes, valves and fittings, Additional title: Cleaning system with 5 vessels, Volume CIP tanks each: 2400 l, Height: 2,6 m, Operation / Control: Proleit Software, Material: vessels from stainless steel, Position: vessels standing on 3 feet each, Base construction: flatconical vessels, Features: 5 CIP tanks (1 of which is insulated); feed pump; 3 chemical dosing pumps; tube bundle heat exchanger; level probes; temperature measurement; conductivity measurement; pneumatic butter ...

Overview  This automatic bottle unscrambler was manufactured in 2022 by the German company Breitner Abfüllanlagen GmbH. The model BFA 8003 is a high-performance, fully automatic plastic bottle unscrambler designed for gentle handling and fast format changes with minimal change parts. It offers reliable operation even with challenging bottle geometries and lightweight PET containers. The machine is a trade fair model, never used in production, and is therefore in as-new condition. It was only showcased at exhibitions and comes with a 12-month manufacturer warranty. Technical data  Capacity: Up to 150 bottles/min Operation: Continuous from bulk hopper feed Bottle types: Plastic (PET, HDPE, etc.) Bottle dimensions: Ø up to 80 mm, length up to 100 mm, height up to 300 mm (larger possible upon request) Bottle orientation: Bottom-first via pneumatic flipping device Machine direction: Left  ...

Flottweg three-phase decanter, Z4D-3/441, last used in a fruit juice plant. Inner drum diameter: 420 mm Inner drum length: 1245 mm Drum wall thickness: 10 mm The medium to be separated is fed into the hollow center axis of the decanter. Centrifugal force causes the solids to collect on the drum shell. A cylindrical-conical screw conveyor transports the ring of solids to the discharge openings, where it is ejected into the solids housing. The two liquid components separate according to their specific density and form two hollow liquid cylinders. The diameter of the liquid rings can be adjusted using a peeling disc and overflow weir. One of the two phases is discharged without pressure and one is discharged under pressure via the paring disc. The moisture content of the solids and the purity of the liquids can be controlled by: - Varying the phase separation discs and paring diameter - Dec ...

Overview The Krones, Gera, Joha, Markl, Miho filling line for returnable glass bottles was previously used to fill beer in a brewery in southern Germany. Technical Specifications Output: 7,800 bph Producs: Beer and CSD Formats: NRW 0.5 l 0.33 l ring neck 0.25 l LN Machine List  Machine type: Decrater Manufacturer: BMS Year of manufacture: 2012 Machine type: Decapper (Screw Cap) Manufacturer: Rink Decapping in the crate Euro 0,5l in 4x5 crate Year of manufacture: 2012 Machine type: Bottle washer Manufacturer: Gera Year of manufacture: 2024 Machine type: Empty bottle inspector Manufacturer: Krones Model: Smarttronic Incl. Pusher Year of manufacture: 2012 Machine type: Filler Manufacturer: Kosme Model: Isofill G 28/960 28 Valves Year of manufacture: 2012 With Combi Capper 4 heads(Crown Cork and Screw Cap) Capacity: 7,800 bph Machine type: Labeling machine Manufacturer: Krones Model: Robust ...

- , , This PET single-use filling line is designed for bottle sizes of 0.5 L, 1.0 L, and 1.5 L and achieves a nominal output of up to 24,000 bottles per hour (for 1.0 L bottles). New bottles are destacked pallet by pallet on the new bottle unstacker and transported pneumatically to the rinser. The system consists of high-quality components from renowned manufacturers and includes: • - (KHS, 2001) • (KHS, 2001) • (Ortmann & Herbst, 1978) with downstream Velcorin dosing • - / , / (KHS, 2001) with chlorine dioxide and sterile water rinsing • -- (KHS, 2001) with Alcoa screw capper and liquid nitrogen dosing • (miho, 1992) • (KHS, 2001) • - (KHS, 2003) with hot melt glue applicator and best-before date printer This filling line is ideal for beverage manufacturers who want to fill water, soft drinks, or fruit spritzers in disposable PET bottle ...

概要 この機械はリールからの高速ラップアラウンドラベ� ��付けを目的に設計されています。この機械は生産� �インから持ち出され、完全に機能しています。生産 は終了していますが、検査は可能です。技術データ: 製造元:ドイツ・クローネス モデル:コンティロール 製造年:2008年 ラベル付けアプリケーター:2基(ウェットグルーヘッ� ��)動作 方向:右側機械、機械の片側は並列 生産能力:45,000/時間 作業ラベル:インリール 電源:400 V ± 5%、50 Hz ± 1%、3P + N + PE、補助 24 V DC