粉砕機 中古 販売のため (2,243)

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: with grinding stone-Mounting: Hole shaft cone Ø 62-69 mm / Left thread.-Grinding wheel: Ø 450 x 40 mm-Transport dimensions: Ø 450 x 140 mm-Total weight: 30 kg

Cloth lapper, polishing disc, grinding disc, coarse cleaning disc-Manufacturer: 3M Scotch-Brite, coarse cleaning disc type CG-DC Ovp 2 pieces-Art.No.: 61163-Diameter: Ø 200 x 13 mm-Shipping/Price: complete-Transport dimensions: 205/3205/H35 mm-Weight: 0.3 kg

Abrasive bodies, ceramic abrasive bodies, polishing bodies for rotary vibrators, vibratory finishing systems, vibratory finishing rotary vibrators, trowal systems, continuous vibrators -Manufacturer: Rösler, ceramic grinding wheel type RS 40/40 2 bags -Content: 25 kg/bag -Price/delivery: complete -Transport dimension.: 400/380/H400 mm -Total weight: 50 kg

Double bench grinder, double grinding machine, pedestal grinder, bench grinder, drill grinding machine -Grinding disc: max. Ø 200 x 30 mm -Speed: 2800 rpm -Motor power: 0.74 kW -Operating voltage: 380 volts

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: with grinding stone, 2 pieces-Mounting: Hole shaft cone Ø 50-60 mm-Grinding wheel: Ø 225 x 40 mm-Shipping/Price: complete-Dimensions each: Ø 225 x 90 mm-Weight: 10.4 kg/piece

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: with grinding stone-Mounting: Hole shaft cone Ø 32-35 mm-Grinding wheel: Ø 210 x 40 mm-Transport dimensions: Ø 210 x 70 mm-Total weight: 4.3 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine-Inside: Ø 51 mm-Outer: Ø 200 mm-Width: 32 mm-Price: per piece-Number: 2x available-Weight: 2.1 kg

Abrasive bodies, ceramic abrasive bodies, polishing bodies for rotary vibrators, vibratory finishing systems, vibratory finishing rotary vibrators, trowal systems, continuous vibrators -Condition: used -Manufacturer: Rösler, ceramic grinders 40/45/45 mm 1 box -Content: 71 kg -Price/delivery: complete -Transport dimension.: 600/400/H220 mm -Total weight: 72 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: with grinding stone, 2 pieces-Mounting: Hole shaft cone Ø 44-55 mm-Grinding wheel: Ø 270 mm, see photos-Shipping/Price: complete-Dimensions each: Ø 270 x 80 mm-Weight: 9.7 kg/piece

Double bench grinder, bench grinder, column grinder, column grinder-Manufacturer: Cordia, double bench grinder type DOTN-150-Grinding wheel: max. Ø 150 x 25 x 20 mm-Motor power: 0.35 kW-Speed: 3000 rpm-Operating voltage: 380 volts-Dimensions: 410/200 / H1045 mm-Weight: 33 kg

Cloth rag, polishing wheel, grinding wheel -Diameter: 160 mm -Width: 25 mm -Hole: Ø 40 mm -Number: 12 brushes available -Price: per piece -Weight: 0.7 kg/piece

Grinding machine, angle grinder, for chipper knives, planer knives, saw blade grinder, lathe grinder, milling cutter grinder, surface grinder, drill grinder, bench grinder -Manufacturer: Chuet Nevers, tool grinding machine -Speed: 3000 rpm -Grinding wheels: Ø max. 200 mm -Accessories: included, see photos -Dimensions: 680/590/H1560 mm -Weight: approx. 121 kg

Cloth lapper, polishing wheel, grinding wheel -Cloth lapper with abrasive fabric: grain 220 -Diameter: Ø 160 mm - Width: 30mm -Intake: Ø 10 mm -Number: 8x brushes available -Price per piece -Weight: 0.4kg/pcs

Tool grinding machine, grinding machine, angle grinder, turning tool grinding machine, steel grinding machine -3x grinding wheels: Ø 340 mm, speed 1500 rpm -1x grinding wheel: Ø 170 mm, speed 3000 rpm -Max. steel cross-section: 80 x 80 mm -Dimensions: 1300/900/H1450 mm -Weight: 500 kg

Round vibrator, vibratory grinding system, vibratory grinding machine, vibratory grinding round vibrator, tumbling system, continuous vibrator, vibration conveyor, oscillating conveyor, conveyor trough, spiral conveyor -Manufacturer: OSRO, round vibrator type OS10 -Working container: elastically mounted -Total volume: 600 liters -Outer diameter: 1430 mm -Work basin width: 320 mm -Work basin height: 545 mm -Machine for: deburring, polishing, rounding edges -Dimensions: 1570/1430/H1140 mm -Total weight: 1140 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.37 kW -Speed: 2900 rpm -Grinding discs: max. Ø 175 mm -Operating voltage: 380 volts -Dimensions: 420/390/H1150 mm -Weight: 65 kg

Motor grinding spindle, grinding spindle, high-performance grinding spindle, spindle head -Manufacturer: Santenberg, spindle head from CNC machining center GTC S 2 -Hydraulic clamping device: Kitagawa SS1246K / S1246 -Dimensions: see photos -Quantity: 2x spindle heads available -Price: per piece -Dimensions: 830/390/H260 mm / 840/350/H280 mm -Weight: 110 kg / 115 kg

Surface grinding machine, grinding machine -hydraulic horizontal surface grinding machine -Magnetic plate: 300 x 150 mm -Grinding wheel motor: 1.1 kW 2800 rpm -Water cooling with: filter -Grinding disc diameter: 200 mm -Transport dimensions: 1470/1170/H1920 mm -Weight: 1090 kg

Magnetic plate, clamping plate, permanent magnet, magnetic chuck, magnetic chucking plate, permanent magnetic lathe chuck -Manufacturer: narex, magnetic clamping plate, permanent magnet chuck with chuck flange -Type: PERMAG K 250 -Clamping surface: Ø 250 mm -Recording dimensions: see photos -Dimensions: Ø 275 x 115 mm Total weight: 30 kg

cloth lapper, polishing wheel, grinding wheel-Manufacturer: Flex, grinding-polishing sleeves grain 600-Order No.: 318.175-Diameter: Ø 90 x 100 mm-Use: for satin finishing machine Flex LP 1503 VR-Number: 11x polishing sleeves available-Price: per piece, minimum order 3 pieces-Packaging dimensions: 160/150/H15 mm-Weight: 0.05 kg

electric magnetic plate, chuck, magnetic chuck, magnetic chuck-Clamping surface: 1000 x 255 mm-Connection: 100 volts DC-Dimensions: 1000/255/H98 mm-Weight: 140 kg

Deburring machine, pipe deburrer, bore deburrer, deburring device, brush deburring machine, wire brush -Manufacturer: Keil, Keil-Single deburring machine with base -Drive: 3.0/2.0 kW / 3000/1500 rpm -Brush: Ø 200 mm, Ø 200-250-300 mm possible -Brush width: 60 mm, 20-40-60-80-100 possible -Dimensions: 800/800/H1210 mm -Weight: 110 kg

テーブル寸法 X/Y: 900mm/350mm、磁石寸法 X/Y: 600mm/350mm、最大ワークピース高さ: 375mm, 最大テーブル荷重: 300kg。機械寸法 X/Y/Z:3200mm/2600mm/2400mm、重量:約400kg。資料はご用意し� �います。現地での検査も可能です�

band width: 150 mmband length: 3500 mmband speed: 30 m/secScheiben-Ø: 400 mmgrinding feed: 0 - 5 m/minwork piece revolutions: 0 - 140 U/minpower capacity - workpiece power: 2,2 kWgrinding diameter: 100 - 600 mmclamping length: 6000 mmbed length: ca. 8000 mmvoltage: 380 V / 50 Hzmotor speeds:: 1450 U/minpower capacity: 15 kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: 8,6 x 2,6 x 2,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

研削寸法 X/Y:600mm/305mm、最大ワークピース高さ:350mm、送り速度X :24m/min、送り速度Y/Z:2m/min、機械寸法X/Y/Z:約3000mm/2700mm /2500mm、重量:約3200kg、制御:Siemens Sinumerik。制御装置に基板の欠陥があります。文書 vorhanden。現地での検査も可能です�

Suitable for automatic grinding of all types of tools. Accessories: Total enclosure, Knoll E53319 bandfilter system, Numrotoplus software, Numroto software for simple milling cutters and cords,, Numroto software for simple and complex drills, Pallet loader, CNC handwheel, Control cabinet cooler,, automatic tailstock, automatic central lubrication, Glass scales on the X, Y, Z linear axes, Measuring probe, Hydraulic workpiece clamping, Oil collection tray, 2 loading pallets,, 1 grinding wheel holder., X axis travel: 800 mm, Y axis travel: 270 mm, Z-axis travel: 660 mm, B axis travel: 400 °, Rapid traverse: 30/15/30 m/min, Workpiece mount: ISO 50, Tool holder cone: ISO 50, Grinding spindle drive power: 12 kW, Grinding spindle speed stepless: max. 9000 rpm,, Grinding wheel diameter: max 203mm, Connected load approx.: (400V/50Hz), Dimensions L x W x H: 1900 x 2300 x 2300 mm, Weight approx: 5 ...

Suitable for automatic, double-sided grinding of tooth flanks on circular saw blades with carbide tips., Accessories:, Partial enclosure,, 1 sawblade holder,, Coolant system., Circular saw outer diameter: 260 to 2200 mm, Circular saw bore diameter: 25 to 220 mm, sawblade thickness: up to 20 mm, Tooth pitch: from 10 mm, rake angle: any, Radial free angle: up to 6°, Tangential free angle: up to 6°, Grinding path: up to 75 mm, Grinding speed: 0.5 to 6 mm(s), Working speed: up to about 10 teeth/min, Grinding wheel diameter: 125 mm, Grinding wheel bore diameter: 32 mm, Grinding wheel peripheral speed: 26 m/s, Cooling lubricant pump capacity: 250 l/min, Coolant Tank Content: approx. 190 l, Connected load approx.: 6,5 kW (400 V / 50 Hz), Dimensions W x D x H =: 3050 x 1890 x 2050 mm, Weight approx.: 2160 kg, colour: green

従来型のシャウト外置円筒粉砕機も利用可能です。� ��心距離:1000mm、中心高さ:180mm、最大研削径:350mm、最� ��研削距離:1000mm、プランジ研削距離:100mm、スイベル� ��ンジ:45、機械寸法X/Y/Z:約3200mm/1700mm/1700mm、重量:約45 00kg。現地での検査も可能です�

Suitable for the automatic grinding of HM circular saw blades on the face and top in one setting. All known tooth geometries (flat, alternate, trapezoidal teeth, etc.) can be ground automatically and in one pass., Accessories:, Total enclosure,, Coolant system,, Equipment for robot operation with automatic loading door, ND 230 loader, Measuring device for measuring saw blades, Chip breaker grinding attachment, Stepless variable grinding speed of the two grinding spindles from 1600 to 5500 rpm., Grinding speed and grinding path stepless adjustable for each machining surface on the tooth., Automatic central lubrication, Software package for oscillation grinding at rake and clearance angles, Automatic shut-off flap, Automatic fire extinguishing system, Electrostatic oil mist separator N281, Measuring tool, Sawblade holder with guide bushing Ø 16 mm Saw holder >ø180, Sawblade holder with g ...

Suitable for fully automatic grinding or new toothing and chamfering of HSS and segment circular saw blades as well as solid carbide circular saw blades, jig saw blades / thin-cut saws with chip breaker (diameter from 200-500 mm, tooth pitch from 8-30 mm), in plunge grinding using CBN or diamond grinding wheels. Accessories: Machine with total enclosure and integrated machine room lamp,, Loading system including 2 loading mandrels Ø 32 mm,, Oil conversion including aerosol extinguishing generator and oil conversion kit,, Control cabinet cooling unit,, Automatic central lubrication,, Marx VTG 0.32 electrostatic mist extractor,, HSS/HM fine filter system including external filter unit, with integrated 300-liter coolant tank and cooling unit,, Software for all standard curved and pointed teeth,, Signal light to indicate operating status,, Automatic switching of peripheral speed between CBN ...