旋盤 中古 販売のため (3,050)

旋盤直径:190mm 旋盤長:235mm 制御:FANUC/Mori MSX 501 スピンドル回転速度範囲:50-5000 U/minturret ヘッド:2×16 機械の重量 約7.5 tY軸およびB軸 その他アクセサリー詳細は www.marcels-maschinen.ch この広告のデータはLogoTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�

turning diameter over bed: 440 mmturning diameter over slide rest: 270 mmturning length: 1.500 mmcenter height over bed: 220 mmdigital readout: FAGOR 3 Achsenturning diameter in the gap: 620 mmcentre distance: 1.500 mmbed width: 280 mmspindle bore: Ø 52 mmturning speed range: 30 - 2.360 U/min3-jaw-chuck diameter: 250 mmquick change toolholder: KLOPFER Typ GX2Bdrive capacity - spindle motor: 6,3 kWtaper in tailstock-quill: MK 4 dia. of quill: 60 mmquill stroke: 200 mmcoolant: voltage: 380 Vtotal power requirement: 6,5 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,90 x 1,10 x 1,75 m- Serial-No.: D8KK0633- 3-axis digital readout FAGOR- Quick-change steel holder- rapid clamping boring chuck RÖHM 1-13 mm- Coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

中心距離:2000 mm:600 機械の重量 約3.2 t通行 49 mm DigitalLynette この広告のデータはLogoTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�

faceplate diameter: 1.600 mmswing diameter: 2.000 mmturning height: 1.400 mmControl: Fanuc max. Torque: 23.863 Nmcutting capacity: max. 3.000 kgfmax. workpiece weight: 10.000 kgtable:: table diameter: 1.600 mmtable speeds: 0,7 - 280 1/minpower capacity - table: 37/45 kWC - Axis:: resolution: 0,001 °Working speed: 0 - 1.200 °/minmax. table speed: 3,333 1/minturret slide:: Shank diameter: 32 mmspindle cone: ISO 7/24 / No.50 Spindlespeed: 30 - 3.000 min/-1power capacity - Tool Spindle: 15 / 18,5 kWmax. Torque: 235 Nmram cross section: 220 mmaxis stroke:: x-axis: 1.900 mmz-axis: 900 mmcross rail adjustment: 700 mmTool-Presetter:: tool taper: MAS-BT 50 number of toolpositions: 24 (12 + 12) pos.max. tool weight: 50,0 kgdraw bolt: DIN 69872.50 feeds:: rapid feed (X / Z): 7,5 m/minfeed speeds: max. 7.500 mm/minrapid traverse of the crossrail: 300 mm/mintotal power requirement: 80 kVAweig ...

旋回直径:mm回転距離:mm制御:0総消費電力:kW 機械の重量 ca:必要スペース:mこの広告のデータはLogoTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�

turning diameter over bed: 980 mmturning diameter over slide rest: 720 mmturning length: 7000 mmbed width: 620 mmturning speeds: 1,8-355 U/minfaceplate diameter: 800 mm: turning dia. in gap: 1000 mmlength of gap: 350 mmquill stroke: 900 mmspindle hollow: 80 mmweight: 20 tsteady: 600 mmsteady: 480 mmsteady: 480 mmDistance between the canter 7000mmFaceplate diameter 1400urning diameter in the offset 2450, length 940 mmTravel over support 1200Over support with autom. travelThe tech. Data are manufacturer or operatorinformation and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contac ...

greates pass round over bed: 1050 mmdist. between centers: 6000 mmcentre height: 520 mmturning length: 4810 mmworkpiece weight max. (main spindle): 6000 kgMaximum workpiece weight with steady rests: 8000 kgmax. torque on the spindle: 12500 Nmnumber of spindle speeds: 2,8-560 1/minSpeed range 24 levels: feed per revolution: 0,08-56 mmchuck diameter: 630 mmMaximum travel distance of the longitudinal slide: 4810 mmMaximum travel distance of the cross slide (suppor: 530 mmMaximum travel distance of the tool slide (support: 340 mmTailstock quill diameter: 150 mmtotal power requirement: 31 kVAweight of the machine ca.: 10500 kgdimensions of the machine ca.: 7860 x 1970 x 1480 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0330 mm: 210 mm: 1000 mm: 167 mm: 40 mm: 2,2 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3200 mmswing diameter: 3500 mmturning height: 2550 mmworkpiece weight: 50 tfaceplate speeds from - to: 0,8 - 80 U/minmain drive motor: 120 kWcross rail adjustment: 2100 mmControl: Siemens 840D total power requirement: 195 kVAweight of the machine ca.: 65 toverhauled/modernized in 2017:- CNC control Siemens Sinumerik 840 D,- 4-jaw faceplate,- 2 ram supports on the cross beam-- horizontal movement of tool head no. 1: 1400 mm-- vertical movement of tool head no. 1: 1500 mm-- horizontal movement of the tool head No. 2: 1980 mm-- vertical movement of the tool head No. 2: 1350 mm-- Swivel angle of the tool head: -/+ 30°.- Hydrostatic tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 12,7 mmturning length: 50 mmcontrol: Traub System TX 8i turning speeds: 12000 U/minc-axis: 0,001° c-axis: 0,001 °gripping station: 12,7 mmspeeds: 12000 U/minrapid traverse: 15 m/minturret (x-stations): 6 worktool system: 5+3 worktool system: 3 Werkzeugsysteme total power requirement: 2,5/4 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2,4 x 1,1 x 1,7 mdriven tools: 6+4+4 Rev+S7+S8CNC turning machine Traub TNL 12K with barloader LNS Tryton 112Motor drive S8 (rear working with driven tools possible)Motor drive S7 (front working with driven tools possible)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0390 mm: 610 mm: : 54 mm: 330 mm: 4000 U/min : A1-6 DIN 55026 : 60 mm: 140 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mmturning diameter over slide rest: 264 mmturning length: 1000 mmturning diameter in the gap: 550 mmturning speeds: 44 - 2000 U/mincentre height: 200 mmspindle bore: 52 mmtailstock quill taper MT: 4 MKconnected load frequency: 400 Vtotal power requirement: 1,5 / 2,4 kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 1,9 x 0,8 x 1,56 m3-axis digital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 320mmbezel fixedrunning bezel4-fold steel holder.Halogen machine lightmachine lightfoot brakeremovable chip tray, chip protection wallHardened and ground bed tracksComplete coolant systemlining protectionmachine toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

旋回直径:- mm回転長さ:- ベッドスライドを横断する回転直径mm:- 総電力要求量:- 機械のkW重量約:機械のt次元約:mこの広告のデータはL ogoTech oHGのソフトウェアソリューションModulMWSで作成され� �した�

faceplate diameter: 4770 mmswing diameter: 5300 mmturning height: 4130 mmfaceplate turning speed range -stepless-: 0,4 - 45 U/minfeeds infinitely variable: 0,1 - 4000 mm/mintable load: 100 tmain drive motor: 80 kWControl: Siemens 840D vertical Stroke: 3200 mmcross travel: 3600 mmram adjustment: 2000 mmram swivable +/-: 30 z-travel: 1950 mmtotal power requirement: - kWweight of the machine ca.: 125 tdimensions of the machine ca.: 15 x 9 x 13 mequipped with:- CNC control Siemens 840D- 2 Rams on Crossbeam- Pickup magazine with 8 tool holder positions- Automatic clamping of the tool holder in the ram- 1x straight boring head- 1x 90° angle head (not in the pickup magazine)- 1x set of jawsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ベッドでの旋盤直径:2150mm スライドレストでの旋盤直径:1800mm 旋回長さ:10000mm 速度:1 - 300 U/minフェイスプレート直径:1800mm スピンドルボア:200mm 総動力要求:- 機械のkW重量 約:- 機械の寸法 約:- m- 4つ顎フェイスプレート 1800mm - 2 定常レスト 100〜560mmおよび1.3〜1.8m - 4方向ツールポスト-テールストック本広告のデータ� �LogoTech oHGのソフトウェアソリューションModulMWSで作成され� �した�

turning diameter: 640 mmturning length: 1.185 mmcontrol: SINUMERIK 840D swing diameter: 640 mmdistance of spindle heads: 1500 mmslide I:: X1 / Y1 / Z1 / B slide travel X-axis: 550 mmslide travel Z-axis: 180 mmZ- Travel: 1.185 mmB - axis: 240 °feed x-axis: 0 - 40.000 mm/minfeed y- axis: 1 - 24.000 mm/minFeed z- axis: 1 - 70.000 mm/minfeed B-axis: 1 - 20 1/minrapid traverse X/Y/Z: 40 / 24 / 70 m/minfeed capacity X/Y/Z: S6: 7,00/11,00/7,50 kNtool taper: HSK 63 turning speed milling-spindle: 10 - 12.000 1/minpower capacity at 100 % load: 13,20 kWpower capacity at 40 % load: 22,00 kWtorque milling spindle: 60 / 100 Nmtool magazin:: no. of workpieces in the magazine: 46 Stücktool length - max.: 350 / 200 mmtool diameter: 80 mmwotkpiece diameter with 2 vacant positions: 120 mmweight of tools max.: 6 / 10 kgslide II:: X2 / Z2 slide travel X-axis: 180 mmZ- Travel: 1.050 mmfeed x-axis: 1 - 24.0 ...

turning diameter: 820 mmturning length: 6000 mmturning diameter over slide: 520 mmHolder Multifix: control: Siemens type: 805 tailstock quill taper MT: 6 transmission ratio: 2 turning speeds: 8-1600 U/minbed width: 560 mmspindle bore: 128 mmfaceplate: 600 mm3 jaw chuck Forckrath: 400 mmsteady: 250-500 mmchip conveyor: diameter of quill: 125 mmquill stroke: 280 mmtotal power requirement: KVAweight of the machine ca.: 12 tdimensions of the machine ca.: 9,5x2,5x2,5 mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us ...

faceplate diameter: 2000 mmturning diameter: 2500 mmturning speeds: 0,5-100 U/minmax. workpiece weight -without tailstock: 6000 kgmax. workpiece weight between centres: 25000 kgPlate area: mmturning diameter in the pit: 3200 mmtotal power requirement: 55 kWweight of the machine ca.: tdimensions of the machine ca.: 22x5x4 mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data fo ...

turning diameter over bed: 1100 mmturning diameter over slide rest: 740 mmturning length: 6000 mmspindle bore: 110 mmturning speeds: 16-1600 U/mindigital readout: faceplate: mm3-jaw chuck: steady: total power requirement: 22 kWweight of the machine ca.: 11 tdimensions of the machine ca.: mYear of manufacture 1999Control: Siemens 840DTurning length (mm) 6000Max. turning diameter (mm) 1100Max. turning diameter over slide (mm) 740Spindle diameter (mm) 105Speed 16 - 1800 (18x)kW 22Voltage 380VHz 503-jaw chuck ø (mm) ¦4-jaw chuck ø (mm) ¦Fixed steady rest ø (mm) 2xThrough-spindle cooling ¦Multifix tool postThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More ...

turning diameter over bed: 540 mmturning diameter over slide rest: 340 mmturning diameter in the gap: 800 mmlength of gap: 350 mmturning length: 3000 mmturning speeds: 40-1800 U/minbed width: 340 mm3-jaw chuck: 255 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mNo. 65The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was ...

旋回直径:mm回転距離:mm制御:0総消費電力:kW 機械の重量 ca:必要スペース:mこの広告のデータはLogoTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�

turning diameter: 660/275 mmturning length: 1498 mmcontrol: Fanuc/Mori Seiki MSX 701 total power requirement: 90 kVAweight of the machine ca.: 26,6 tdimensions of the machine ca.: 5301 x 2997 x 2788 mm9-axis CNC turning and milling centre Fanuc MSX-701 CNC control Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. 40-position tool magazine 10-position turret at bottom, all positions driven 2 x 3-jaw quick-change chuck KNCS-N 315/91 KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system Chip conveyor Drain system for main spindle chuck (controlled via M function) Drain system for tool cutting edge (controlled via M function) Coolant gun incl. accessories Oil mist extraction Direct measuring system X1, X2, Y-axis Bar loader interface Double foot switch for both spindles Islands and pocket program ...

turning diameter: 400 mmturning length: 1100 mmcontrol: Siemens Sinumerik 840D SL greates pass round over bed: 500 mmSwing dia. over traverse guideway: 370 mmMain spindle:: Max. rpm: 5000 min/-1power capacity - main spindel: 17 / 25.5 kWmax. Torque: 345 Nmspindle diameter in front bearing: 130 mmspindle bore: 67 mmchucking diameter: 325 mmspindle nose: A8 axis stroke:: x-axis: 750 mmy-axis: +/- 100 mmz-axis: 1200 mmfeeds:: rapid traverse: 40 / 40 / 40 m/minTailstock:: tailstock: 1200 mmtaper of center: Mk 5 tension force: max. 8 kNmilling head: b-axis: +/- 120 °tool taper: HSK A 63 tool piece magazine with: 60 spindle turning speed - stepless: 12000 U/minspindle motor: 10,5 kWmax. torque on the spindle: 90 Nmtotal power requirement: - kVAweight of the machine ca.: 9 tdimensions of the machine ca.: 4,6 x 2,5 x 2,82 mEquipped with:- Siemens 840D SlimLine / Celos CNC control- 3-jaw ch ...

faceplate diameter: 1250 mmswing diameter: 1400 mmturning height: 1400 mmcontrol: Siemens 840D travel -x axis: -80 / +1100 mmtravel -z axis: 1060 mmworkpiece height max.: 1400 mmmax. workpiece weight: 8000 kgShank diameter: 200 x 240 mmtable turning speeds: 2- 400 U/mindrive capacity - spindle motor: 44 kWmax. torque on the faceplate: 14510 Nmrapid traverse: 12 m/minturning speed range - milling: 0,01 - 7,4 U/minspeeds of tool: 4 - 3000 U/minwork piece power: 22 kWTorque: 840 Nmtotal power requirement: 90 kVAweight of the machine ca.: tdimensions of the machine ca.: mequipped with:- CNC control Siemens 840Dsl- C-axis- driven tools- tool changer 12-fold (driven tools)- complete enclosure- chip conveyor- coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

travel -x axis: 900 mmtravel -y axis: 200 mmtravel -z axis: 800 mmB-axis swival range +/-: +90 / -20 °positioning accuracy: C: 9 control: SIEMENS number of spindle speeds: 0 - 6.000 CNC turning and milling center vertical | PITTLER - PV 315The machine is in very good condition.Technical data of the machine will follow soon.We ask for your understanding !- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: PV315 | PV-315The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working diameter: 140 mmturning diameter: 185 mmworkpiece length: 120 mmcontrol: Siemens turning speeds: 7.000 U/minVertical Turning Machine | FAMAR - BISUB 160 2GThe machine is in very good condition.Please note that the technical details were added from comparable machines.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: BISUB1602G | BISUB160 2G | BISUB-160 2GThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chuck diameter: 500 mmswing diameter over bed slide: 700 mmcontrol: Siemens travel -x axis: 630 mmtravel -z axis: 500 mmCNC turning and milling center vertical | EMAG - VMC 450 MTThe machine is in very good condition.Please note that the technical details were added from comparable machines.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: VMC450MT | VMC 450MT | VMC-450 | VMC-450MTThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2950 mmswing diameter: 3200 mmturning height: 3500 mmtable load: 20 tfeed range: 3000 mm/minmain drive motor: 70 kWmilling drive: 16,1 kWControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m CNC-control FAGOR 8070 C-axis with 360,000 positions Milling headInspection under power in the factory possible.Machine location is Spain.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

フェイスプレート直径:5500 mm スイング直径:6000 mm 旋盤高さ:4400 mm 制御:FAGOR 8055 クロスレール調整:3000 mmram調整:1500mm ワークピースの重量:100 Tフェイスプレート 速度:1 - 25 U/最小総電力要求:kW 機械の重量 ca.: 機械の寸法 ca.: m 2015年にCNC制御FAGOR 8055に改造 この広告のデータはLogoTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�

turning diameter: 1220 mmturning length: 5000 mmcontrol: FAGOR 8055 TC swing diameter over bed slide: 880 mmspindle bore: 160 mmspindle turning speed range: 0 - 1000 U/mintransmission ratio: 4 tailstock quill diameter: 180 mmtailstock quill stroke: 260 mmmain drive motor: 40 kWtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mIn 2020 overhauled:- Grinding of carriage guides on the X and Z axes- Preloading of X and Z axis ball screw nuts- New Turcite placed on the X and Z axis carriages- General review and disassembly of the engine and head regulator- General review and disassembly of the motors and regulators of the X and Z axes- Disassembly and inspection of the SAUTER tool holder- Checking and cleaning the electrical cabinet- Complete review of the hydraulic circuit CNC-control FAGOR 8055 TC Tool turret SAUTER 4-jaw chuck Ø 1000 mm 3-jaw chuck  ...