旋盤 中古 販売のため (3,108)

turning diameter: 1500 mmturning length: 4500 (5500) mmcontrol: Siemens 840 Dsl max. workpiece weight between centres: 6000 kgtotal power requirement: kWweight of the machine ca.: 40 tdimensions of the machine ca.: mCNC machine configured as a 4-way center lathe with full travel over the steady rests and superstructuresZ-axis travel (longitudinal slide) = 5000 mm (6000 mm with TAE3)X-axis travel (transverse cross slide) = 1000 mmY-axis travel (vertical movement) = 350 mmMaximum workpiece diameter = 1500 mmSwing diameter over cross slide = 1500 mmCenter distance = 4500 mm (5500 mm with TAE3)The cross slide and cross slide do not restrict the diameter range due to their lateral positioning on the lathe bed. Therefore, there is no associated diameter restriction over the cross slide/tool carrier.The cross slide unit, including the cross slide superstructure, can travel completely past the ...

turning diameter over bed: 660 mmturning diameter over slide rest: 450 mmturning length: 2000- 2880 mmthroat: Ø 1200 x 880 mmHeight of centres: 330 mmspindle passage: 85 mmturning speed range: 10- 700 U/mintail stock: MK 5 transmission ratio: 24 tool holder: Multifix C dimensions: 3,5/4,4 x 1,45 x 1,1 mweight of the machine ca.: 4,2 tkonv. lathe with movable bed for long gap.- movable bed 880 mm- swing Ø in gap: Ø 1400 mm- 3- jaw chuck Ø 315 mm- facing plate Ø 800 mm- facing plate Ø 500 mm- rapid travers- some tool holdersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 820 mmturning length: 6000 mmcontrol: Siemens Si 840 D sl total power requirement: 155 kWweight of the machine ca.: 65 tdimensions of the machine ca.: 16350 x 3700 x 3850 mPurchase price EUR 1.550.000Time recording from Feb. 2025Operating hours = 38601 hMain spindle = 1958 hMilling spindle = 1760 hCNC control Si 840D slWorking area 6000 mmWorking height 1390 mmSwing diameter over bed slide/bed 820 mmX-axis travel +850 -25 mmZ-axis travel 6820 mmC-axis, smallest increment +/-0.001°Workpiece spindleSpindle head according to DIN 55026 A15Bathing through 160 mmFront diameter Bearing 240mm2-stage gearbox, infinitely variable programmableDrive power at 100/60% duty cycle: 78/87kWSpeed ranges: 2Speed range I: 10-501 rpmSpeed range II: 10-1750 rpmTorque I, 60% duty cycle: 8000 NmTorque II, 60% duty cycle: 2308 NmC-axisHolding torque with backlash-free spindle brake: 3000 NmSpe ...

turning diameter: 720 mmturning length: 3000 mmcontrol: Siemens 805 turning diameter over slide: 430 mmturning speeds: 1800 U/mintailstock quill taper MT: 6 steady: 3 Stückmain drive motor: 36 kWz-axis: 3050 mmx-axis: 410 mmswing diameter over slide rest: 430 mmspindle motor: 28 kWworkpiece weight: 3000 kgspindle passage: 106 mm3-jaw-chuck diameter: 305 mmchip conveyor: faceplate: mmtotal power requirement: . kWweight of the machine ca.: 6 tdimensions of the machine ca.: 4x2,4x2 mSteady rest 1: Diameter: 120-300 mmSteady rest 2: Diameter: 220-400 mmSteady rest 3: Diameter: 350-500 mmChuck: Diameter: 315 mmMaximum workpiece weight: 3 t (with steady rest)The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m ...

bar material dia.: 20 mmspindle passage: 22 mmturning length: 170 mmturning speeds: 10.000 U/minpositive location each: C-Achse 0,001° Gradgripping station: 20 positive location each: 1° Gradturning speeds: 10.000 U/minnumber of tools: 7+4+8 number of milling stations: 3 control: Fanuc Oi-TD turning length: 170 mmNumber of axles: 5 St.spindle hours: 16.000 hNumber of working hours: 35.000 htotal power requirement: 11 kWweight of the machine ca.: 1900 kgdimensions of the machine ca.: 1,64 x 1,2 x 1,73 + SBF mbar loader: Robobar SBF 320e 3200mm Stangeparts conveyor: nein oil mist filter: ARO swiss type machine Tornos Delta 20/5, built 2011, with barloaderRobobar SBF 20eExcellent conditions,from precision engineeringThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 4000 mmswing diameter: 4200 mmturning height: 2000 mmworkpiece weight: 50000 kgcross travel of ram-slide: 2300 mmslides vertical travel: 1250 mmswival range +/-: -15/+30 Gradfaceplate turning speed range: 0,5 - 55 U/minControl: Fagor 8055i CNC total power requirement: 182 kWweight of the machine ca.: 134 tdimensions of the machine ca.: 5920 x 10200 x 8400 mmMachine overhauled in 2008- CNC Control FAGOR 8055i- Tool C8- Chip ConveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 430 mmturning diameter over slide rest: 220 mmturning diameter in the gap: . mmturning length: . mmturning speeds: 12,5-1600 U/minbed width: 410 mm3-jaw chuck: 250 mmspindle passage: 550 mmcentre distance: 750 mmtotal power requirement: kWweight of the machine ca.: 2 tdimensions of the machine ca.: mNo. 65The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamT ...

number of spindles: 8 spindle passage: 36 mmturning length: 250 mmspindle bearing diameter: 358,2 mmbar material dia.: 36 mmbar length: 4000 mmlongitudinal slide -travel: 145 / 250 mmcross slide - travel: 80 mmspindle turning speed - stepless: 560 - 4000 U/minspindle motor: 28 kWTotal weight, approx.: 8500 kgdimensions of the machine ca.: 5850 x 1900 x 2580 mmxmmxmm- Beckhoff CNC control system (Win2000)- IEMCA 4m bar feeder (PRA52/P-Typ42)+ Hydraulic catch chute+ Mechanical end-piece chute with container+ Parts conveyor belt+ 3–4 bar oil connection+ 100 bar high-pressure connection+ 1 HYDAC hydraulic oil cooler+ 1 oil cooler for cutting oil+ 1 chip conveyor+ 1 magnetic roller for sludge removal+ 1 new air conditioning unit for control cabinet / year of manufacture 2025+ Feed block: new brass strips fitted in 2023, making the machine as good as new+ Spindle couplings 2nd, 4th and 6t ...

turning diameter: 320 mmturning length: 600 mmcontrol: Fanuc Oi-TD spindle bore diameter: 74 mmnumber of controlled axis: 2 turning speed range: 3000 U/minrapid speed: 20 m/minnumber of tapers in turret head: 12 direkttail stock: Ja power requirement: 15 kWweight: 5,0 tdimensions: 3,7 x 1,6 x 2,0 mUsed CNC- Lahte 2 axis- 3 jaw chuck Ø 250 mm- chip conveyor- oil dust collector- Tool presetterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 280 mmturning length: 400 mmcontrol: Fanuc 18 T spindle bore diameter: 51 mmnumber of controlled axis: 2 turning speed range: 0 - 4000 U/minrapid speed: 30 m/minnumber of tapers in turret head: 12 VDI 40tail stock: Ja dimensions: 3,9 x 1,6 x 2,1 mweight: 4,0 tweight of the machine ca.: 3,9 tpower requirement: 15 kWUsed CNC- Lahte with box way, 2 axis- 3 jaw chuck Ø 200 mm- chip conveyor- oil dust collectorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 42 / 140 mmturning length: 170 mmcontrol: Mitsubishi Meldas turning speeds: 80-8.000 U/minc-axis: 0,001° turret (x-stations): 2x 12 (VDI 20) angetriebenturning speeds: 45-4.500 U/mingripping station: 42 mmspindle: 1 kWturning speeds: 60-6.000 U/minc-axis: 0,001° number of controlled axis: 8 collet unit: 48 DIN 6343 .Number of working hours: 10769 hchip conveyor: ja/yes Bj. 2018total power requirement: 7,5 / 11 kWweight of the machine ca.: 3,3 tdimensions of the machine ca.: 2,4 x 1,6 x 2,2 mCNC turning and milling machine CITIZEN BOLEY BE 42, year 2007Simultaneous working with 7 axes on main and pick-up spindlevery good condition, operating hours 21.999h (September 2024)Accessories:# Various tool holders:5x axiale driven tool holder# collet chuck for collets type 173E# additional coolant cooler# Knoll chip conveyor, year of construction 2018The Boley BE 42 is without  ...

turning diameter: 376 mmturning length: 1245 mmcontrol: FANUC i-Series turning diameter over bed: 376 mmx-travel: 230 mmz - travel: 1350 mmrapid travel x/y/z: 24/30 m/minmain spindle speeds:: 2800 spindle motor: 35 / 26 kWmax. torque on the spindle: 1613 Nmspindle passage: 102 mmtotal power requirement: 33,91 Kvaweight of the machine ca.: 7 tdimensions of the machine ca.: 4,6 x 2,11 x 2,3 mEquipped with:- Fanuc i-Series CNC control- C-axis- 3-jaw chuck, 304 mm diameter- 12-station tool turret- Tailstock- Chip conveyor- CEOnly 2,300 spindle hoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

旋回直径:1800 mm 旋回距離:600 mm 制御:シーメンス6 - ジョーチャック:?スピンドルボア:130 mm、スピンドルノーズ:DIN 55027 Größe 11 旋回速度範囲:1 - 400 U/minmax。スピンドルトルク:9000 総動力要求:38 / 52 kW 機械重量 約25 T次元 約6×3×2.5 m本広告のデータは、LogoTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�

旋回直径:340 mm 旋回長:1.135 mm 制御:Sinumerik 840D プログラムオン:約22,000 回転 ベッド越しの回転直径:700 mm スピンドル距離:1.470 mm 総動力要求:kW 機械の重量 約:14.5 機械の寸法 約:5.614 x 2.417 x 2.419 m。この広告のデータはLogoTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�

turning length: 2000 mmgreates pass round over bed: 630 mmswing diameter over slide rest: 350 mmcontrol: Monforts Control System K bed width: 550 mmturning speed range: 2 - 1800 U/minspindle diameter in front bearing: 120 mmspindle head DIN 55027 - Size: 8 tool taper: RD2 PARATquill stroke: 210 mmspindle bore: 71 mmtotal power requirement: 30 kWweight of the machine ca.: 5 tdimensions of the machine ca.: 4,90 x 2,10 x 2,00 mThree-jaw chuck / key bar / Ø250mmFour-jaw chuck3-jaw chuck for tailstock4-station tool post head PARATFixed steady rest, Ø smallFixed steady rest, Ø largeVarious chuck jaws, live centers, live centers, tool holdersChip conveyor with coolant pumpThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

スピンドル通路:最大80mm。旋回直径:最大395mm。旋回� �離:750 mm、制御:システムTX 8H最大。スピンドル回転数:3.150 U/min。CNC旋盤 |トラウブ - TNA 400 マシンは良好な状態です。- - - - #Tags:TNA400 |TNA-400 この広告のデータは、LogoTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�

spindle passage: 80 mmmax. turning diameter: 460 mmMax. Turning length: 1.000 mmcontrol: System TX 8F max. Spindle speed: 2.800 U/min.CNC lathe | TRAUB - TNA 500The machine is in a well-maintained condition.The machine videos from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags:TNA500 | TNA-500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: Fanuc 31/32 i : 2 chucking diameter: 170 mmswing diameter: 210 mmx-travel: 400 mmz-travel: 200 mmlength: 2500 mmwidth: 1900 mmheight: 2300 mmweight: 5500 kgturning height: mmturning diameter: mmswing diameter: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1450 mmturning diameter over slide rest: 950 mmturning length: 4000 mmcentre height: 725 mmfaceplate diameter: 1000 mmtravel -x axis: 980 mmtravel -z axis: 4000 mmworkpiece weight: 2 toturning speed range: 1,5 - 1000 U/minspindle hollow: 500 mmControl: Siemens 828D total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - m- CNC Control Siemens 828D- Front and Rear 1000mm dia. 4 – chucks- Tailstock- Chip Conveyor- Boring Bar 1500 mm x 120 mm- Boring Bar 1690 mm x 120 mm- Boring Bar 1000 mm x 80 mm- Boring Bar 1500 mm x 100 mm - Quantity of KM ToolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bed width: 350 mmturning length: 1.000 mmcontrol: Manual plus 620 Heidenhaingreates pass round over bed: 430 mmSwing dia. over traverse guideway: 220 mmMain spindle:: turning speed range - main spindle: 1 - 3.600 min/-1power capacity - main spindel: 9 / 11 kWmax. Torque: ca. 200 Nmspindle head: DIN 55027 / 6 spindle diameter in front bearing: 110 mmspindle bore: 80 mmusable bar diameter: max. 80 mmTool Mount:: System: MultiFix Shank diameter: 20 x 20 mmaxis stroke:: x-axis: 230 mmz-axis: ca. 1.000 mmTailstock:: diameter of quill: 70 mmquill stroke: 150 mmtaper of center: MK 5 steady: hollow: fix: 12 -150 mmhollow: var: 12 -125 mmfeeds:: rapid traverse: X: 10 / Z: 7 m/minfeed power: X: 4 / Z: 5 kNtotal power requirement: - kWweight of the machine ca.: 3,2 tdimensions of the machine ca.: 2,8 x 2,1 x 1,9 mDocuments: Tailstock: steady rest: 1x Coolantsystem: Multifix holder: 2x Lat ...

turning diameter: 313 mmturning length: 501 mmcontrol: Fanuc Oi-TD total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mFanuc Oi-TD cnc controlmain spindle: collet chuck devicesub spindle: collet chuck device12-fold revolver (BMT 55)C-axisY-axisdriven toolscoolant deviceTechnische Daten: / technical detailsSchwingdurchmesser / rotary diameter 707 mmDrehdurchmesser / turning diameter 313 mmDrehlänge / turning length 501 mmX-Weg / X-travel 196 mmZ-Weg / Z-travel 715 mmY-Weg / Y-travel -25,4 / +65 mmmax. Drehzahl Hauptspindel / max. spindle speed main spindle 5000 UpM /rpmmax. Drehzahl Gegenspindel / max. spindle speed sub spindle 5000 UpM /rpmAnzahl der Revolverplätze / number of tool places 12 max. Stangendurchmesser / max. bar diameter 51 mmAntriebsleistung Hauptspindel (30min)/ drive capac ...

: 0330 mm: 210 mm: 0635 mm: 167 mm: 40 mm: 2,2 kWspindle turning speed - stepless: 30-3000 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 356 mmturning length: 510 mmcontrol: M 730 BM total power requirement: 40 kVAweight of the machine ca.: 6,6 tdimensions of the machine ca.: mCNC control:Mitsubishi 730 BMMain spindle:Speed: 5000 rpmPower: 15/11 kW (15% duty cycle / constant)Bar diameter: 65 mmSub spindle:Speed: 6000 rpmPower: 11/7.5 kW (25% duty cycle / constant)Turret:12 stationsTool spindle speed: 10000 rpmPower: 5.5/3.7 kW (5 minutes / constant)Y-axis travel: +/- 50 mmEquipment:Machine with gantry loader:Left-hand installation, 14-station storage, 20-pallet workpiece storage,Double gripper conveyor3-jaw hydraulic KITAGAWA power chuck, 210 mm diameterHigh/low pressure chuck system for main and counter spindlesMABEO high-pressure pump with 1.5 MPa filter unitCoolant gunCoolant sprayer on the chuck for main and counter spindlesCoolant sprayer for the machine bed claddingOil mist separatorHinged belt c ...

ベッドでの旋回直径:430 mm スライドレスト越しの旋回直径:230 mm 旋回長:1000 mm 中心高さ:215 mm 中心距離:1000 mm スピンドルボア:56 mm 回転速度範囲:19 - 2000 U/min 総動力要求:7.5 kW 機械の重量約:1.9 サイズ L×W x H:2.78 x 1.25 x 1.40 mアクセサリー:3つこチャック 250 mmø 4ポスツールポスト、堅牢安定この広告のデータはLog oTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�

swing diameter: 530 mmturning diameter: 150 mmspindle passage: 65 mmcontrol: SIEMENS 840 C travel x1: 175 mmtravel y1: +/- 70 mmtravel z1: 433 mmtravel x2: 175 mmtravel y2: +/- 70 mmtravel z2: 433 mmspindle turning speed range: 38 - 4000 U/minC-axis: 2 x tool turret: 2 x 12 Pos.number of driven tool stations: 2 x 12 tool shaft (cylinder shaft DIN 69880): VDI 30 total power requirement: 33 kWdimensions of machine L x W x H: 3,95 x 2,49 x 2,6 mAccessories: collet fixtures on main spindle and sub spindle, one collet for main spindle and one for sub spindle, various tool holders (for driven tools as well), various spindle reductions, chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 400 mmturning length: 1000 mmcontrol: FAGOR control: CNC 8055/B-T centre height: 200 mmcentre distance: 1000 mmturning dia. over face-slide: 210 mmbed width: 300 mmspindle bore: 65 mmspindle turning speed range: 0 - 3000 U/mintransmission ratio: 2 feeds - longitudinal: 0 - 10.000 mm/minfeeds - cross: 0 - 10.000 mm/minrapid travel - longitudinal/face: 15 m/mintailstock quill diameter: 68 mmtailstock quill stroke: 155 mmtailstock taper MT: 4 total power requirement: 8 kWweight of the machine ca.: tdimensions: 3,1 x 1,9 x 1,78 mAccessories: 3-jaw chuck 200 mmø, MULTIFIX-tool post with various inserts, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 220 mmturning length: 250 mmcontrol: SIEMENS SINUMERIK 820 T swing diameter: 380 mmchucking diameter: 250 mmx-travel: 200 mmz-travel: 250 mmspindle turning speed range: bis 4000 U/minrapid travel - longitudinal/face: 15 m/mintotal power requirement: 27,5 kWweight of the machine ca.: 4,5 tdimensions of the machine ca.: 3,2 x 2,9 x 2,2 macc.: hydr. 3-jaw chuck, various tool holders for turret, chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

旋盤直径:16 mm 軸径:16 mm 旋回長:160 mm 制御:GE FANUCシリーズ18 i-T軸 旋回速度範囲:8000 U/minrapid traverse:30 m/最小総動力要求:2.2 kW 機械の重量約:2.1 t付属品:バーローダー IEMCA、GENIUS 226-32 L、YOM 2002(バー直径2 - 26 mmおよびバー長1500 - 3210 mm用) チップコンベヤー、冷却材 この広告のデータはLogoTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�

旋盤直径:110mm 旋回長:450mm 制御:シーメンス 総動力要求:kW 機械の重量 約:9000 kg 機械の寸法 約:m本広告のデータはLogoTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�

旋回直径:160mm 旋回長:550mm 制御:シーメンス 総動力要求:kW 機械の重量 約:9000 kg 機械の寸法 約:m本広告のデータはLogoTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�