機械は完全に正常に動作しています。動作も良く、 も必要ありません。 以下が装備されています: 内部・外部ジョーを備えた3つジョーチャック 4つ顎独立型チャック テールストック用のドリルチャック テールストック用の回転センター MODネジ用の56Tギア クイックチェンジツールポストには6つのツールホル ダーがあり、4つは標準ホルダー、1つはパーティン ブレードホルダー、1つは1MTです
control: GE Fanuc Series 21i-T Distance between centres: 5000 mmcenter bore: 425 swing over bed: 850 mmbed width: 425 mmrapid feed: 10000 mm/minworking feed: 7000 mm/minmain spindle bore: 85 mmMain spindle: DIN 55027-n°8 taper: 5 spindle speeds: 0-2000 U/minSpindle power: 11 KWtailstock quill diameter: 96 mmtailstock travel: 215 mmweight of the machine ca.: 7 tdimensions of the machine ca.: 7.300x1.700x1.900 mSupport Guides 2Swing over cross carriage 560 mm.Automatic ranges 2Turret type AutomaticTurret positions 8Hydraulic tailstock quill stroke INCLUDEDTailstock taper MORSE 63 Jaw Auto-centering hydraulic chuck Ø 300 mm. INCLUDED4 support steady rest Ø 450 mm. INCLUDED3 support steady rest Ø 250 mm INCLUDEDChuck protection INCLUDEDComplete rear protection INCLUDEDDual handwheel for carriage control INCLUDEDFoot pedals for hydraulic chuck opera ...
turning diameter: 460 mmturning length: 795 mmcontrol: MORI SEIKI M730 BM Swing diameter face slide: 590/360 mmspindle passage: 80 mmTraverse X/Z:: 260/795 mmNumber of working hours: 19.552 hCutting time: 10.704 hspindle drive: 18,5 kWtotal power requirement: 40 kVAweight of the machine ca.: 6,4 tdimensions of the machine ca.: 3.994 x 3.056 x 2.187 mChip chuck Ø250 mm.Chuck sub-spindle Ø170 mm.Holder HAINBUCHchip conveyorsuctionBar feeder Hydrafeed Multiservo mod MSVmax. bar length 1,600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
chucking diameter: 250 mmworkpiece dia.: 200 mmcontrol: Siemens 840 D sl c-axis: Position genauigkeit arcs 10tool turret with 12 work positions: 12 turning spindle: 2 spindle turning speed range: 6.000 / (4.500) U/minSpindle power: 26 / (28,3) max. torque on the spindle: 150 / (300) spindle nose: 55026 - A6 tool taper: VDI 40 turning speeds: 10.000 U/minz-travel: 370 mmx-travel: 30 mmy-travel: +- 40 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
回転直径:720 mm旋削長さ:3.000 mm制御:FAGOR 8055 TC/B ベッド上の回転直径:470 mmスピンドルボア:92 mmスピンドルノーズ:DIN-55027-11 スピンドル直径:150 mmスピンドルドライブ:17 / 20,5 kW総電力要件:28 kW機械の重量約:5,7 t機械の寸法約:mこの広告のデータは、LogoTech oHGのソフトウェアソリューションであるModulMWSで作 されました
: : VDI 20 : number: 3 Stück im Paket : Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 330 mmturning length: 510 mmcontrol: FANUC 18i - T turning diameter over bed: 600 mmturning diameter over slide: 550 mmx-travel: 250 mmz - travel: 580 mmy-travel: 100 (±50) mmb-axis: 0.001 mmrapid travel x/y/z: 20/7,5/24/ m/minrapid taverse: B- Achse 20 m/minc-axis: 4.500/ 6.000 °spindle passage: 76/ 45 mmspindle nose: A2#6 spindle turning speed range: 4.500/ 6.00 U/minspindle drive: 15/ 7,5 kWTurret: 12- fach Stationen Chip coveyor: Inkl. chuck: Hauptspindel 210 mmchuck: Subspindel 160 mmtotal power requirement: 50,7 kVAweight of the machine ca.: 4,9 tdimensions of the machine ca.: 3.118 x 1.705 x 2.076 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
