Manufacturer: Baumüller, Type: BUS 3-15/30-30-004, Serial number: 95307404 C,
Manufacturer: Homag, Type: BAZ 20 - 50 -12, Year: 1994, Control: Homatic, Working range X: 6000, Working range Y-axis: 1400, C axis: yes, Number of milling spindles: 1, Tool adaption system: HSK, Milling engine 1 hours power: 12, pm: 1800-24000, pm: 1800-24000, raster table: yes, Vacuum pumps m³/h: 2 X 100, Drill vertical: 14+7, Saw unit: yes, Edgebanding unit: yes, Verleimhöhe max.: 45, Vorbeschichtete Kante: no, Radial arm machine: yes, Year :1994
Manufacturer: Homag Anschlaglineal gesteuert, Type: aus KFL 10, FREITEXT1: Pneumatisch gesteuert, FREITEXT2: 8 fach Revolver, FREITEXT3: 10 mm Schiene, FREITEXT4: mit Befestigung Kettenbahn,
Manufacturer: Homag, Spare part from machine: Homag KL 79, Edge sanding unit: yes, for left machine side: yes, Own drive: yes, Total hight mm: 450, Installation width mm: 350, Max. roller diameter: 80, Speed rpm: 1450, Pneumatically controlled: yes, pneumatisch gesteuert : yes, Sanding belt hight: 150, Sanding belt width max mm: 150 X 2100, Sanding belt length max mm: 2100, Main engine kW: 0,5, 2 belt speeds: 1, Belt clamping pneumatically: yes, Oscillation: yes,
Manufacturer: Homag, Type: Rechnerkarte, Model: CPU-Karte 70 BO 10 MHz 2 RAM, Serial number: 4-086-05-194,
Manufacturer: Becker , Type: SV.5.430/2, Year: Turbine zum Kühlen von Transportkette, Control: A 1781760, Year :Turbine zum Kühlen von Transportkette
Manufacturer: 2 StückPerske, Type: Ritzmotor Homag FPL 526, Motor with gear: KNS 51.14-2 D, From machine: Homag Maschine, Spindle length mm: ca.60, Diameter of the spindle mm: 30, Power kW: 1,0/2,0, Volt/Hz: 50-60-120, pm: 2750/5700/3380/6920, Motor with gear: KNS 51.14-2 D, Price per unit Euro: 600, FREE TEXT: Spindeldurchmesser 30/Länge mm ca. 55 mm,
Manufacturer: Homag, Type: NFL 26/6/10/PW/L, Year: 2002, Control: Homag, Work piece width min-max mm: 136-250, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 10-25, Working width min-max mm: 136 - 250, Feeding speed min-max m/min: 15 - 60, 1st milling unit kW / rpm: Ritzen 4,5 kW/6000 U/min, 2nd milling unit kW / rpm: Ritzen 4,5 kW/6000 U/min, 3rd milling unit kW / rpm: 6,6 kW Profilfräsen 6000 U/min, Free space for units: 2x 460 mm, Machine overhauled: no, System dismantled: yes, Year :2002
Manufacturer: Perske Umrichter, Year: 1996, Type: 2004 neugewickelt, Year :1996
Manufacturer: Homag, Spare part from machine: KF, for right machine side: Rechts, Number of motors: 2, kW-Leistung : 0,62/300 HZ, Drehzahlen U/min : 18000, Siko Anzeige : yes, Horizontal Rollentastung : yes, Vertical roller sensing: yes, Pneumatically controlled: 8-fach Revolver, Revolver adjustment: yes, Slewable horizontally: yes, pneumatisch gesteuert : yes, FREE TEXT: Profilverstellung Pneumatisch,
Manufacturer: Homag, Type: Ritzsäge Nachschwenkeibrichtung für links und rechts, From machine: Homag FPL, Shaft dimensions L x D mm: 1200,
Manufacturer: Homag Fräsständer Bündigfräsaggregat, Spare part from machine: KF Maschine, for right machine side: rechts, Number of motors: 2, kW-Leistung : 1,1, Drehzahlen U/min : 18000, Siko Anzeige : yes, Horizontal Rollentastung : yes, Vertical roller sensing: yes, Pneumatically controlled: no, kW-output 2: 1,1/300,
Manufacturer: Homag, Type: Motorhalterplatte mit pnematischen ein und Ausrücken, From machine: Homag FÜL 526,
Manufacturer: Homag, Type: FKR 78/C/A/S3, Monting of the machine: zerspanerteil zum Einkürzen, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 10-40, Min-max feed m/min: ca.18, Infeed table: yes, Premilling: yes, Fine milling: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius scraper: yes, Flat scraper: yes, Bonding part EVA: yes, Work piece refeeding: Bargstedt, Roller/belt: Riemen, Compressed air bar: 6, Return type: Bargstedt TFU,
usava
Manufacturer: Homag KF 20, FREITEXT1: Kompletter Maschinentänder, FREITEXT2: rechte Seite mit, FREITEXT3: HL04/Vorfräsen/FK03 und Verstellbett,
Manufacturer: Homag Flachzieklinge, Type: Nachputzeinrichtung Leimfuge, Ausführung links: yes, Ausführung rechts: yes, Flachziehklinge: yes, Tracing by roller: yes, FREE TEXT: Beseitigung von Klebstoffresten im Bereich der Leimfuge. Abtastung von oben und unten. Werkstückdicke 7 - 60 mm,
Manufacturer: Homag Druckrollen, Type: Teile von KF Maschine, Year: 1996, FREITEXT1: EINZUGSVORRICHTUNG 10 ROLLEN HOCHKLAPPBAR mit schräggestellten angetriebenen Rollen versetzt. Min. Werkstücklänge 250 mm, Year :1996
Key data: 4000 mm
Controlo de energia PC85, Woodwop, ATC 12 vezes, muitos acessórios, unidade de cola, ... 2 mesas de troca retráteis e extensíveis, mesa de fixação em duas partes com 2 estações de processamento para atribuição de pêndulos, altura máxima de 65 mm de aresta, trituração de aparas e recortes, cabeça de perfuração 17 fusos, fuso principal 14,5 kW, velocidade 24000 1/min Incluindo muitos acessórios Condição: desmontada
Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...
Workpiece thickness: 8 - 90 mm, electronically adjustable Feed rate: 18-32 m/min frequency controlled Edge thickness: 0.3 - 3 mm for roll edges, strips up to 20 mm Equipment: Inlet guide automatically adjustable via the control, extension 500 mm Joint milling unit: 2 x 3.0 KW workpiece preheating Gluing unit A34 edging magazine for roll Pressure zone with 1 driven, 6 non-driven rollers, automatic adjustment from the control Cutting unit WK14, straight, 2 motors 0.8 kW Pre-milling unit: 2 x 1.5 KW, pneumatic adjustment Form milling unit FF 12 automatic, 2 motors 0.4 kW radius/phase milling unit FF12 automatic 4 motors 0.4 KW universal milling aggregate controlled UF11, 4 kW Profile scrapers PN20 Glue scrapers Nozzles for detergent and anti-stick Polishing unit Control: Power Control PC22
Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...
Fixed side at the left Panel thickness min/max: 16/45 mm Min. panel width: 150 mm Lateral panel support for panel width up to 900 mm Min/max. panel length: 700 / 3100 mm Max. laminate overhang: 110 mm Max. laminate thickness: 0,8 mm Radius min/max: 6 / 22 mm (depends the laminate) Feedspeed max. 18 m/min Top pressure by belt Equipment: Infeed fence, adjustable, defines the panel overhang 2 x trimming unit 0,4 kW, HSK 25 toolholder 1 x PVAc glue application 5 x glue nozzle, adjustable 1 x hot air blower 3 x IR heating on top (55 cm length), 3 x bottom (90 cm length) Postforming zone 1,8 m. length Various pre-installed profiling sets 1 x top trimmer 0,4 kW
Bridge type Capacity for all units: 3300 x 1100 mm (alternating: 2 x 1025 x 1100 mm) Capacity for routing with tooldiameter 25 mm: 1550 mm Workpiece thickness up to 300 mm (stroke Z-axis 600 mm) Speed in X and Y: 60 m/min, Z: 25 m/min, Vector: 85 m/min 6 Support rails with LED positioning indication Vacuum: 100/140 m3/h Controlls: Powercontrol PC85 Waste/chip removal belt in machine base Machine pneumatically prepared to take pneumatic clamps, 3 pcs clamps included Drilling unit V9/H4, 13 spindles, motor 2,2 kW Main spindle DRIVE5C+, 5-axis, 10 kW, HSKF63 taper, speed 1000 to 24000 r/min, tooldiameter up to 180 mm for routing, 350 mm for cutting 14-fold rotary toolchanger and pick-up place for a sawblade Woodwop software
Key data: 2 kW, 5000 kg, 14 kW
Homag SawTeq B-300 flexTec com robô Yaskawa D200 Marca: Homag Tipo: B-300 flexTec/Profi HPP300/43/43/F N.º M: 0-240-69-1263 Ano de Marca: 2020 Controlo: Cadmatic 5 Ardis Controlo de Dados Labeller: Pica II na barra de impressão Carga total ligada: serra de 80A, trituradora de 35A e robotter de 14A Comprimento de corte: 4.300 mm Largura/profundidade de corte: 4.300 mm Serra principal: 13,5 KW Protrusão da lâmina de serra mm: 80 mm Alimentação da serra: 130 m/min Motor de serra de pontuação: 2.2kW Dispositivo de pressão angular: Espada Ranhuras: Nuttprogram Collets: 8,Collet 1: PowerConcept Programa Trolley Feed: Step-Free Configuração da almofada de ar: 4 pcs, com entre placas de enchimento Dimensões da tabela: 1 (1.760650) + 3 (2.170650) mm Características adicionais da máquina: Conexão com o sistema de armazenamento Yaskawa DX200 ...
Inv. Num. : 8966 Tipo: Optimat KAL 210/A3/S Produtor: HOMAG Criado: 2008 Parâmetros: Sistema de Controlo: Power Control PC 22 Altura de fixação: 950 mm Espessura da aresta: 0,3-3 mm Espessura da peça: 12-40mm Velocidade de avanço: 18-25 m/min Mínimo. Largura do material: 60 mm Dimensões da máquina: 8300 × 1300 × 1800 mm
Double sided edgebander manufactured in 2004. This HOMAG KBZ KFR20 / KFR526 complete production line features a turning station and a Bargstedt stacker. It is designed for formatting, milling, seaming, grooving, and edging panels in a single work process, specifically for storage and partition wall elements. If you are looking to get high-quality edging capabilities, consider the HOMAG KBZ KFR20 / KFR526 machine we have for sale. Contact us for further details.
Edgebander manufactured in 1999. This HOMAG Optimat KL 78/A20/S2 features a panel formatting milling cutter, bevel and rounding milling cutter, groove saw, and edge draw blade. It accommodates workpieces with a thickness range of 8 to 60 mm and has a working height of 950 mm. If you are looking to get high-quality edging capabilities, consider the HOMAG Optimat KL 78/A20/S2 machine we have for sale. Contact us for further details.
Used folding machine line consisting of: Lifting table with pusher Roller conveyor Feeding unit Transfer system and workpiece pre-cleaning Double-end profiler Brand: Homag Type: FG63 Year of manufacture: 1985 Technical Specifications - With adhesive strip application - Machine for profiling and folding trim strips - Milling station on both sides - Control system: Siemens Simatic Touch - Glue application unit - Folding unit for folding pre-folded workpieces - Sliding shoe for pressing - Discharge table for material removal Electric scissor lift table Brand: Altek Year of manufacture: 2014 Technical specifications - Max. load capacity: 1000 kg - With integrated roller conveyor - Dimensions: approx. 3100 x 1000 mm - With height sensor for automatic detection of stack height and corresponding cycle timing Tilting skip Brand: Bauer Type: WU-R 1500 Year of manufacture: 1995 Technical ...
Edgebander manufactured in 2010. This HOMAG KAL 210 Ambition 2264 is a used single-sided edge banding machine. If you are looking to get high-quality edge banding capabilities, consider the HOMAG KAL 210 Ambition 2264 machine we have for sale. Contact us for further details. Equipment: - Release Agent Spray Unit - Jointing Unit - A20 Glue Application Unit - Pressure Roller Unit - End Trimming Unit - Profile Trimming Unit - Corner Rounding Unit - Profile Scraping Unit - Glue Joint Scraper - Buffing Unit - Cleaning Spray Unit
