Manufacturer: HomagTürenfertigung mit mit Verleimteil und KUKA Roboter, Type: BOF / BAZ20/50/18/2/D, Year: 2002, Control: Homatic PC 83, Software: Woodwop, Work piece width min-max mm: 1600, Min.-max. workpiece length in mm: 800 - 3500, Min.-max. workpiece height in mm: 12 - 60/120, Working range X: 5800, Working range Y-axis: 1600, Working range Z: 160, C axis: 2, Work piece width min-max mm: 1600, Min.-max. workpiece length in mm: 800 - 3500, Min.-max. workpiece height in mm: 12 - 60/120, Number of milling spindles vertical: 2, Tool adaption system: HSK F63, Milling engine 1 hours power: 14,5, rpm 1): 1500 - 18.000, Milling engine 2 hours power: 14,5, rpm 2): 1500 - 18.000, Kettenwechsler: 70, Pickup Wechlser: 6, Number of tools per tool-magazine: 6 + 70+ 20, Mitfahrender Werkzeugwechsler: yes, Belt conveyor: yes, 2 station allocation: yes, Vacuum pumps m³/h: 2 x 66, Rigging supp ...
Manufacturer: Homag Postforming, Type: VFR10/22, Year: 1997, Control: Homatic/NC 16, Software: Homag, Finished product: Türzargen/Verkleidungen, Indirekt Postforming: yes, Work piece width min-max mm: 60-1000, Min.-max. workpiece length in mm: 800-2500, Min.-max. workpiece height in mm: 16-28, Workpiece protrusion mm: 55-30, Profilarten : L-Profil/U-Profil, Postformig Fräsaggregate Stück/kW: 2 X 1 kw, Universalfräsaggregat Stück/kW: 2 X 4 kw, Leimauftrag für Profile mm: U-105, Düsensystem: yes, Furnierbefeuchtung: yes, Heiz und Ablüftstation: yes, Profildruckstrecke: yes, Fräsaggregat : yes, Fräsaggregat U-Profil/Nuten: yes, Year :1997
Manufacturer: Homag, Type: KAL 310, Year: 2004, Control: NC 21, Software: Homag, Min-max edge material mm: 0,5-3, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-55, Min-max feed m/min: 24, Axis control: yes, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400 Watt, Coil magazine: einfach, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, Radius milling axis adjustment: lyes, Corner tracing type: FK 11, 2 motors: 2, Radius scraper: yes , Scraper with axis adjustment: yes, Flat scraper: yes, Spraying system 2: yes, Cleaning nozzles: yes, Bonding part EVA: yes, Pre-smelting Kg/Hr: yes, Buffing unit: yes, Top pressure belt/roller: Band, Separation agent setup: yes, Workpiece support: yes, Machine lenght mm: ca.9,5, Noise enclosure: yes, Return type: Bargsted ...
Manufacturer: Homag, Type: FL 20/07/15/S, Year: 2003, Destacking plant: PC 21, Vereinzelung: Woodline, Software: yes, Maschinensteuerung: 220 - 1500, Machine no 1: 220, Motore Maschine 1: 8 - 90, Machine 2: yes, Motore Maschine 2: 500, Kantenversiegelung: 10- 40, Conveyor: yes, Trittschal: max 110, Einlegstattion in Kartons: 25 mm, Min.-max. workpiece height in mm: 11, Working width min-max mm: yes, Working hight min-max mm: 6,6, Machine with controlled dogs: yes, Cam distance mm: 6,6, Feeding speed min-max m/min: yes, Feed stepless: 11, Min-max protrusion of workpiece mm: yes, 3 Engine power kW: Mittelschnitflasch Arbeitsbreite 300 - 500 mm, Year :2003
Manufacturer: Homag, Type: FL 20/06/30/S, Year: 1995, Maschinensteuerung: Homatic, Machine no 1: Quermaschine, Motore Maschine 1: 5, Magazine: yes, Conveyor: Kette, Work piece width min-max mm: ca.220, Min.-max. workpiece length in mm: 220-3000, Min.-max. workpiece height in mm: 10-40, Machine with controlled dogs: yes, Cam distance mm: ca.400, Feeding speed min-max m/min: 6-40, Feed stepless: yes, verängerte Kette mm: yes, Nockenaushebung: no, Magazine: yes, Overall milling units: 10, Moulding units swivel-mounted: 5+5, gesteuerte Fräsaggregate: no, 1st milling unit kW / rpm: 6,6/5800, 1. swivelling controllable: schwenkbar, 2nd milling unit kW / rpm: 6,6/5800, 2. swivelling controllable: schwenkbar, 3rd milling unit kW / rpm: 6,6/5800, 3. swivelling controllable: schwenkbar, 4th milling unit kW / rpm: 6,6/5800, 4. swivelling controllable: schwenkbar, 5th milling unit kW / rpm: Freipl ...
Manufacturer: Homag mit Verleimteil, Type: Optimat BOF / 40 / G , Year: 2000, Control: WoodWOP, Programmierplatz Büro: yes, Work piece width min-max mm: 1050/1200, Min.-max. workpiece length in mm: 4800, Min.-max. workpiece height in mm: 60/200, C axis: yes, Tool adaption system: HSK F63, Milling engine 1 hours power: 12, rpm 1): 1500 - 18000, Number of tool changers: 1, Number of tools per tool-magazine: 12, Mitfahrender Werkzeugwechsler: yes, Vertical drills-X: 11, Drill vertical Y: 7, Horizontal drills-X: 4, Aluminium sleeking table: yes, 2 station allocation: 2, Stops in the table front: 6 , Vacuum pumps m³/h: 120, Saw unit: yes, Edgebanding unit: no, Marking laser: Laserpositionerhilfe, Radial arm machine: yes, Foot mats: yes, Available: ca. 03/2017, Year :2000
Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG unit carrier for milling units -with heavy leadership -laterally movable -with counter -Table height: 272 mm -Table surface: 1555 x 300 mm -Table thickness: 18 mm -Dimensions: 1555/500/H272 mm -Weight: 190 kg
Manufacturer: Homag, Type: KL 10/21/QA, Year: 1999, Program: Homatic, Control: PC 21, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 50, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-60, Edgeband height max mm: 65, Min-max feed m/min: 10-30, Axis control: yes, Infeed table: no, Einlauflineal gesteuert: yes, Premilling: yes, Application of separation agent: yes, IR zone: yes, Strip magazin: no, Mitre stations: yes, Pre-milling: yes, Radius milling axis adjustment: yes, Corner tracing type: FK 13, 2 Motoren: 2, Magazin : 2 X 12, with tool holders: HSK, Grooves, slewable-controlled: Freiplatz, Radius scraper: yes, Scraper with axis adjustment: yes, Flat scraper: yes, Corner trace buffing: no, Corner trace buffing: no, Bonding part EVA: 2 Stück, Number of tools per tool-magazine: 2 X 8, Buffing unit: yes, Roller/belt: Riemen, Freiplätze: ...
Manufacturer: Homag, Type: KFR 21 und KFL 21 inkl.Winkelübergabe, Year: 1999, Control: 2 X NC 21, Program: Homatic, System comprising of: 2 Kantenmaschine mit Winklelübergabe, Kantenmaschine mit Doppelenprofiler Teil: 2 Zerspaner + Fügen, getrennte Kette: yes, Laserverleimteil: no, Kantenstärke min-max mm: 0,5-3, Work piece width min-max mm: 45, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-45, Strips min/max mm: no, Machine no 1: KFR 21, MA 1 Arbeitsbreite min-max: 250-2800 mm, MA 1 Kantenmaterialstärke min-max mm: 0,5-3,0, Ma 1 Fügefräsen: yes, Ma 1 Schutzfräsen: yes, MA 1 Feinfräsen: yes, MA 1 Nuten: yes, MA 1 Verleimteil gerade: yes, MA 1 Vorfräsen: yes, MA 1 Radiusfräsen 1: yes, MA 1 Radiusziehklinge: yes, MA 1 Flachziehklinge: yes, MA 1 Schwabbeln: yes, MA 1 Nuten: yes, Angular transfer: yes, Machine 2: KFL, MA 2 Kantenstärke 0,5-3 mm: yes, ...
Manufacturer: Homag , Type: Power FR 20/09/15/L/Q1, Year: 2007, Control: Powercontrol Homag, Conveyor: Nockenkette, Work piece width min-max mm: 350, Min.-max. workpiece length in mm: 220-1500, Min.-max. workpiece height in mm: 10-30, Machine with controlled dogs: yes, Cam distance mm: ca.500, Feeding speed min-max m/min: ca.60, Feed stepless: yes, verängerte Kette mm: yes, Overall milling units: 5, Moulding units swivel-mounted: 5, gesteuerte Fräsaggregate: keine, 1st milling unit kW / rpm: 6,6/5850, 1. swivelling controllable: yes, 2nd milling unit kW / rpm: 6,6/5850, 2. swivelling controllable: yes, 3rd milling unit kW / rpm: 6,6/5850, 3. swivelling controllable: yes, 4th milling unit kW / rpm: 6,6/5850, 4. swivelling controllable: yes, 5th milling unit kW / rpm: 6,6/5850, 5. swivelling controllable: yes, Year :2007
Manufacturer: Homag PU und EVA, Type: KAL 310 310/6/A3/S2, Year: 2008, Control: NC 22, Software: Homag, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 12-60, Min-max feed m/min: 10-25, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Coil magazine: 2-fach, Mitre stations: HL 81, Bevel milling: yes, Corner tracing type: FF 12, 4 motors: Ja, Radius scraper: yes, Type of scraper: PN 10, Flat scraper: FA 11, 4 motors: Ja, Ersatzverleimteil : PU, Bonding part EVA: EVA, Buffing unit: yes, Separation agent setup: yes, Year :2008
Manufacturer: HOMAG Maschinenstrasse, Type: Kf 62, Year: 1992, Work piece width min-max mm: Maschine 1 1200 mm<CRLF>Maschine 2 2600 mm, Min.-max. workpiece length in mm: 250-2600, Min.-max. workpiece height in mm: 10-50, Edge band thickness min/max mm: 0,5-3,0, Soft edge single side: no, MA 1 min - max working width: 250-1200, MA 1 chipper: yes, MA 1 fine milling: yes, MA 1 grooving: no, MA 1 glueing part Soft: no, MA 1 rough milling: yes, MA 1 radius milling 1: yes, MA 1 grooving: no, Min - max working width MA 2: 250-2600, MA 2 min - max edge material thickness mm: 0,5-3,0, MA 2 edge thickness 0.5-3 mm: yes, MA 2 chipper: yes, MA 2 fine milling: yes, MA 2 glueing part straight: yes, MA 2 trimming: yes, MA 2 Andruckzone : yes, Coil magazine: 2-fach, Feeding: no, Angular transfer: yes, Feeding speed max m/min: 10-50, Compressed air bar: 6, Premilling: yes, Flush/radius/chamfer mill ...
Manufacturer: Homag , Type: Genius 20/50/16/V/G, Year: 1998, Control: Homatic, Feeding speed max m/min: 80, Working range X: 5600, Working range Y-axis: 1600, Working range Z: 60/120, C axis: yes, B-axis: no, Tool adaption system: HSK F 63, Milling engine 1 hours power: 12, rpm 1): 1500 - 18000, Number of tool changers: 1, Number of tools per tool-magazine: 30, Vertical drills-X: 5, Drill vertical Y: 5, raster table: Glattisch, 2 station allocation: yes, 4 station allocation: yes, Stops in the table front: 14, Stops in the table rear: 3, Vacuum pumps m³/h: 66 + 100, Saw unit: yes, Edgebanding unit: yes, Edgeband hight mm: 40, Marking laser: yes, Year :1998
Manufacturer: Homag, Type: KL 79, Control: Homatic, Min-max edge material mm: 3-20, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 10-60, Edgeband height max mm: 65, Min-max feed m/min: 10-25, Premilling: no, Fine milling: yes, Application of separation agent: no, IR zone: no, Strip magazin: Leistenmagazin, Min.-max. batten magazine mm: 3-20, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Corner tracing type: no, Bonding part EVA: yes, Pre-smelting Kg/Hr: yes, Number of sanding units: 2, Profile sanding top bottom: yes, Top pressure belt/roller: Riemen, Edge sanding straight: yes,
Manufacturer: Homag, Type: KFL 10/42/QE/S, Year: 2002, Program: yes, Control: Homatic NC 21/ES00, Work piece width min-max mm: 280-600, Min.-max. workpiece length in mm: 320-2500, Min.-max. workpiece height in mm: 8-60, Edgeband height max mm: 30-50, Kantenmaterial min-max mm: 0,3, Vorschub min- max m/min: 10-40, Finished product: Spanplatten aufdoppeln bekanten, Softforming: yes, Einlauflineal gesteuert: yes, Premilling: yes, Profile milling: yes, Trennmittelauftrag: yes, IR zone: yes, Coil magazine: 2-fach, Premilling: yes, Mitre stations: yes, Vorfräsen: yes, Fasefräsen: yes, Radiusfräsen Achsverstellung: yes, Oszilierend: yes, Reinigungsdüsen: yes, Ersatzverleimteil : yes, Verleimteil EVA: yes, Düse: yes, Year :2002
Manufacturer: Homag KAL 310/9/A20/S2, Type: 310/9/A20/S2, Year: 2005, Control: Powercontrol, Barcode: möglich, Min-max edge material mm: 0,3-3,0, Work piece width min-max mm: 75, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 10-60, Min-max feed m/min: 15-30, Axis control: yes, Infeed table: Winkelanschlag, Einlauflineal gesteuert: yes, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400, Coil magazine: yes, Strip magazin: no, Mitre stations: yes, Radius milling axis adjustment: yes, 2 motors: FK 13, Magazin : 2 X 6 fach, Radius scraper: yes, Type of scraper: servo gesteuert, Scraper with axis adjustment: yes, Spraying system 2: yes, Bonding part EVA: PU Verleimteil, Buffing unit: yes, Barcode: möglich, Workpiece support: yes, Hover cussion table: yes, Return type: TFU 140/L/20/08/105 Bauyeshr 2018, FREE ...
Manufacturer: Homag, Type: Profi BAZ/20/40/14/3/KA, Year: 2003, Control: Woodwop, Maschinensteuerung: Homag, Programming station office: möglich, Work piece width min-max mm: 1400, Min.-max. workpiece length in mm: 5200, Min.-max. workpiece height in mm: 10-60, C axis: yes, Number of milling spindles vertical: 2, Anzahl Frässpindeln horizontal: no, Milling engine 1 hours power: ca.12, U/min 1) Vertikal: 1500-24000, Milling engine 2 hours power: ca.12, U/min 2) Vertikal: 1500-24000, Number of tool changers: 2 (1 defekt), Tellerwechseler: yes, Number of tools per tool-magazine: 12, Mitfahrender Werkzeugwechsler: yes, Belt conveyor: Rollentransport, Traverse table: yes, Stops in the table front: yes, Automatische Beladung: yes, Automatschische Entladung : yes, Vacuum pumps m³/h: 100, Tool clamping system: HSK 63, Saw unit: yes, Radial arm machine: yes, Laser positioning: no, incl. to ...
Manufacturer: Homag, Type: KL 10/18/QA, Year: 2000, Program: Homatic, Control: NC 21, Min.-max. workpiece height in mm: 85 - 1200, Edgeband height max mm: 240, Min-max feed m/min: 8 - 60, Axis control: 0,3 - 3,0 , Einlauflineal gesteuert: 10 - 40, Application of separation agent: 0,4 - 12, Power per lamp: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: Granulat, Strip magazin: yes, Magazin : yes, Grooves, slewable-controlled: FK 13, Nuten : UF 11, Radius scraper: yes, Type of scraper: 8, Scraper with axis adjustment: yes, Flat scraper: 2, Type of scraper 2: yes, Corner trace buffing: 2 X Fase, 4 motors: yes, Corner trace buffing: yes, Servo-Kopieren: yes, Rollende-Kette: Band, Ersatzverleimteil : Riemen, Bonding part EVA: 6, Nozzle: 11.000, Pre-smelting Kg/Hr: yes, Year :2000
Manufacturer: HOMAG Optimat , Type: BOF 32/30/K, Year: 1999, Control: Homatic, Maschinensteuerung: 80, Programming station office: 3600, Work piece width min-max mm: 1200, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 1, Throuh running machine: 2, Feeding speed max m/min: HSK 63, Working range X: 12, Working range Y-axis: 24000, Working range Z: 12, Working range Y-axis: 24000, B-axis: 2, Pendulum processing: 12, Tool adaption system: 2 X 12, Milling engine 1 hours power: 2 X 7, U/min 1) Vertikal: 2 X 6, Milling engine 2 hours power: 2 X 6, Frässpindel horizontal 1 kW: 4, U/min 1) Horizontal: yes, Bohrergetriebe Horizontal: 2 X 120 , Kettenwechsler: no, Working widht max mm: yes, Max. working depth in mm: inkl Werkzeuge und Zubehör, Year :1999
Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying of 2 sides each -Milling unit pivotable -1x engines Perske -Power: 0.3 KW -Voltage: 165 volts -Frequency: 300 Hz -Speed: rpm -Other engines with other services in stock for an additional charge -Dimensions: 560/470/H570 mm -Weight: 66 kg
Interface, control card, output card, control unit, edgebander, edgebander -Manufacturer: HOMAG HOMATIC -Type: PC control output card -Number: 2 tax cards available -Price: per piece -Dimensions: 30/195/H265 mm -Weight: 0.29 kg
Control card, output card, control unit, edgebander, edgebander -Manufacturer: HOMAG HOMATIC -Type: 2-083-01-5405 -Type: 2083015405 -Number: 1x tax card available Price: per piece -Dimensions: 20/190/H260 mm -Weight: 0.35 kg
Output module, control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 4-086-05-0113 -Type: 4086050113 -Number: 1x control cards available -Price: per piece -Dimensions: 130/425/H30 mm -Weight: 0.63 kg
Interface, control card, output card, control unit, edgebander, edgebander -Manufacturer: HOMAG HOMATIC -Type: PC control output card -Type: -Number: 1x tax card available -Price: per piece -Dimensions: 20/195/H265 mm -Weight: 0.27 kg
Pressure zone turret, softforming interchangeable profiles for softforming machines, double-end tenoners, edging machines, scoring motor, chipper motor, milling motor for edging machines -HOMAG softforming interchangeable profiles for softforming profiles can be quickly converted to straight edges -with heavy leadership -laterally movable -with counter -HOMAG milling unit for joint milling -with heavy dovetail guide -1x engines Perske -Motor type: -Power: 3.0/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1800/1400/H1300 mm -Weight: 712 kg
