tours machines d'occasion à vendre (3,110)

GILDEMEISTER - CTX 310 V3 Détails de l’offre Numéro de stock 1039-9126 Type de machine : centre de tournage et fraisage CNC Fabricant : GILDEMEISTER Type CTX 310 V3 Année de construction : 2003 Contrôle 840 D Siemens Pays d’origine : Italie Informations complémentaires sur le centre de tournage et de fraisage CNC GILDEMEISTER - CTX 310 V3 - Incluant 2x tubes réducteurs Détails techniques Diamètre de rotation : 210 mm Longueur de rotation : 580 mm Contrôle 840 D Siemens Hauteur centrale 190 mm Diamètre de rotation sur plateau : 330 mm Diamètre de rotation au-dessus de la glissière frontale : 260 mm Axe principal : Plage de vitesse - broche principale max. 4 000 tr/-1 Puissance d’entraînement - broche principale 10 / 7,5 kW couple maximal 115 / 86 Nm Alésage de la broche 68,5 mm Diamètre de la tige utilisable : 51 mm C - Axe 0,001° Voyages : Débattement - x ...

OKUMA - MacTurn 50 Détails de l’offre Numéro de stock 1039-9061 Type de machine : centre de tournage et fraisage CNC Fabricant OKUMA Type MacTurn 50 Année de construction 2000 Contrôle OSP 7000 L Emplacement de stockage D-59302 Oelde Pays d’origine : Japon Délais de livraison par arrangement Base de fret depuis l’emplacement Informations complémentaires CNC - Centre de tournage et fraisage OKUMA - MacTurn 50 Détails techniques diamètre maximal de rotation 580 mm Longueur de tournage : 1500 mm Contrôle OSP 7000 L Diamètre circonférentiel sur le lit : 610 mm Diamètre circonférentiel sur le châssis : 580 mm Axe principal : Plage de vitesses - broche principale 12 - 2 800 tr/-1 Diamètre du roulement de la broche : 150 mm Alésage de la broche 110 mm Nez de broche JIS A2-11 Puissance d’entraînement - broche principale 37 (30) kW Axe C 0,001° Voyages : axe x  ...

HITACHI SEIKI - HiTec-Turn HT 20 RIII Numéro de stock 1039-9425 Pays d’origine : Allemagne Détails techniques Diamètre de rotation : 450 mm Longueur de tournage : 380 mm Seico 40L Multi Control Diamètre d’usinage maximal 340 mm Passage à barres 51 mm Plage de vitesse - broche 30 ~ 5 000 tr/min Puissance d’entraînement - moteur de broche 11 / 7,5 kW Nez de broche A2-6 Alésage de la broche 59 mm Diamètre du roulement : 100 mm Course - x 215 mm Course - z 400 mm Tête de tourelle (x-fold) 16 Débit d’alimentation 0,001 ~ 500 mm/min Traversée rapide X/Z : 30 m/min Diamètre de l’arbre 25 x 25 mm Diamètre de l’arbre des perceuses : 40 mm Contre-stock Affût de crosse MK 5 Décalage de la crosse arrière 300 mm Consommation totale de puissance 23 kVA Espace nécessaire : environ 5,5 x 2,8 x 2,2 m Accessoires Documentation Convoyeur à puces Contre-stock Lampe  ...

turning diameter: 140 mmturning length: 615 mmcontrol: C200-4D spindle passage: 65 mmMain spindle: turning speeds: 5.000 U/minmax. torque at 40% / 100% load: 145 / 105 kWturret-slide: 1,2 und 3 x-travel: 110 mmz-travel: 360 mmy-travel: 70 mmrapid traverse X/Y/Z: 25/12/45 m/minOpposed spindle: slide travel X-axis: 150 mmZ- Travel: 600 mmturning speeds: 5.000 U/minB - axis: B-Korrekturachse +/- 1 °tool turret - number of stations: 3 x 12 tool taper DIN 69880: VDI 25 x 48 C-axis: 0,001 °total power requirement: 61 kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: 9,75 x 3,10 x 2,85 mLoading:Breuning Profimat 65.8x270/8 multi-channel loading magazine, built in 2005for bars with lengths of 500–3,000 mm, 8 guide channels with spindle insert tubes (Ø 16, 25, 30, 40, 45, 55, 60, 65 mm)Unloading:BREUNING ILS-REX-7208 automatic workpiece unloader, built in 2007The data for th ...

turning diameter: 275 mmturning length: 900 mmcontrol: TRAUB TX8i-s spindle passage: 65 mmspindle turning speed - stepless: 1 - 5.000 U/minspindle diameter in front bearing: 110 mmC-axis: 1 - 500 U/minx-axis: 175 mmz-axis: 650/975 mmy-axis: +/- 40 mmrapid traverse X/Y/Z: 20 / 40 / 20 m/minfeed capacity X/Y/Z: 5,5 / 5,5 / 10 kNtool turret - number of stations: 10 number of driven tools: 10 mmtoolpiece turning speed range: 1 - 6.000 U/minpower capacity at 25 % load: 5,50 kWmax. torque at 25% load: 17,50 Nmtool taper DIN 69880: Ø30x55 spindle diameter in front bearing: 110 mmtotal power requirement: 95,00 kWweight of the machine ca.: 16,00 tdimensions of the machine ca.: 10,00 x 3,50 x H3,00 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 1000 mmswing dia.: 1000 mmZ-axis stroke: 900 mmcontrol: Siemens 840 D tool taper: SK 50, VDI 60 tool piece magazine with: 44 Plätzenworkpiece weight max.: 35 kgtool length - max.: 500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0330 mm: 210 mm: 1000 mm: 167 mm: 40 mm: 2,2 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tension de fonctionnement : 380 VFréquence : 50 HzTension de commande : 220 VCourant nominal : 20 ALongueur de pointe : 1000 mmHauteur centrale au-dessus du plateau : 250 mmDiamètre de rotation au-dessus du plateau: 500 mm Hauteur centrale au-dessus du support : 150 mmDiamètre de rotation sur le support : environ 300 mmPassage de la broche : environ 58mm La machine est équipée d’une crosse arrière, d’un porte-manivelle en acier multifix et d’un mandrin à trois mâchoires FORKARDT, diamètre : 200 mmainsi qu’un affichage numérique à deux axes du fabricantHEIDENHAIN Speed : jusqu’à 2500 tr/min Auction-ID: A7-49089-410

turning diameter: 310 mmturning length: 450 mmcontrol: Fanuc O-TC total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Fanuc O-TC12-fold revolver (VDI30)3-jaw chuck main spindle3-jaw chuck sub spindlechip conveyortool measuring devicecoolant deviceTechnische Daten / technical details:Umlaufdurchmesser über Bett / rotary diameter over bed 500 mmUmlaufdurchmesser über Planschlitten / rotary diameter over sledge 310 mmmax. Drehdurchmesser / max. turning diameter 310 mmmax. Drehlänge / max. turning lenght 450 mmX-Weg / X-travel 200 mmZ-Weg / Z-travel 450 mmDrehzahl / spindle speed 4500 UpM /rpmWerkzeugrevolver / turret head 12 fach /holesStangendurchlass Hauptspindel / bar diameter main spindle 50 mmEilgang X / rapid feed X 24 m/minEilgang Z / rapid feed Z 30 m/min.Antriebsle ...

- Distance maximale entre les points d’environ 6000 mm. - Tournage sur le lit d’environ 740 mm. - Affût basculant environ 420 mm. - Largeur de plateau 510 mm. - Diamètre de pas de barre d’environ 80 mm. - 18 vitesses de rotation de 16 tr/min à 1250 tr/min. - Plateau à 3 mâchoires, diamètre 315 mm. - Affichage numérique Fagor 20i-T 2 axes (X,Z). - Équipé d’une lunette. - Conditions de fonctionnement de cette machine : non vérifiées. Auction-ID: A7-48839-14

turning diameter: 400 mmturning length: - mmcontrol: DMG Mori SLIMline z-axis: ca. 750–755 mmx-axis: 276 mmy-axis: +/-60 mmgreates pass round over bed: 700 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe machine is in very good condition and has recently been inspected and measured by a service technician.The lathe was primarily used to manufacture turned plastic parts. CNC lathe with driven tools, C-axis, Y-axis, andcounter-spindleCNC control:DMG Mori SLIMline multi-touch control (19/Operate 4.7 on Siemens)Screen language: German/EnglishMain spindle:A2-8 with AC motorDrive power 25.5/17 kW (40/100% duty cycle)Spindle speed 4000 rpmHollow clamping system, max. bar capacity 80 mmCounter-spindle:A2-6 designed as a built-in motor spindleISM 52 with hydraulic clamping deviceDrive power 14/13 kW (100/40% duty cycle)Spindle speed 5000 rpm12-sta ...

turning diameter: 580 mmturning length: 1040 mmSpindle Speed: 3.500 U/min.travel -x axis: 250 mmtravel -z axis: 1040 mmdiameter of quill: 85 mmweight of the machine ca.: 7200 kgdimensions: 4650 x 2320 x 2060 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: FANUC 21i-TB Control x-axis: 390 mmz-axis: 780 mmspindle taper: A2-11 number of spindle speeds: 2000rpm engine output: 37 kWweight of the machine ca.: 9000 kgdimensions of the machine ca.: 1905,0 × 2720,0 × 3260,0 mThe machine has chucks that can produce gears from 100 to 500 mm.Special chuck is availableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0400 mm: 246 mm: 1250 mm: 195 mm: 54 mm: 7,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0460 mm: 270 mm: 1500 mm: 230 mm: 76 mm: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

center height over bed: 500 mmcentre distance: 6.000 mmbed width: 670 mmturning diameter over bed: 1.030 mmturning dia. over face-slide: 640 mmMax. workpiece weight between centers: 5.000 kgMax. workpiece weight between centers (collet): 6.000 kgfeed speeds x- and z-axis: 6.500 mm/minspindle head: ASA 15 spindle turning speed range: 4 - 830 U/minTorque: 6.224 Nmtotal power requirement: 70 kWweight of the machine ca.: 11,3 tHeadstock: - Front bearing, inside diameter: 235 mm - Rear bearing, inside diameter: 216 mm - Diameter of hole through spindle: 170 mm - Morse taper in spindle sleeve: 6 MKTailstock: - Quill diameter: 150 mm - Quill travel: 400 mm - Quill morse taper: 6 MKSaddle and cross slide: ...

turning diameter: 200 mmturning length: 1000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 79430 €: 1501.23 €: 600 mm: 1500 mm: 300 mm: 80 mm: 400 mm: 400 mm: 8 : 90 MK: 3 : 20 - 100, 80 - 400, 400 - U/Min: max. 8 m/min: max. 8 m/min: 290 mm: 90 mm: 5 MK: 225 mm: 11 kW: 3,5 / 22 kW/Nm: 1,75 / 11 kW/Nm: 120 Nm: 1250 daN: 1050 daNFast and simple communication between the operator and the lathe.Simple workpieces are machined in the same way as on the universal lathe, but more efficient.Complicated workpieces are machined in the same way as on the universal lathe, but faster.Complicated workpieces are machined in the same way as on the CNC lathe, but easier.Based on the controller Schneider Magelis the intelligent, self-developed ZMM Sliven softwareleads the operator also without programming skills simple and fast to the finished workpiece.The interface is simple and with large icons, which is convenient in a specific work enviro ...

: neu : Bulgarien : 114970 €: 2172.93 €: 890 mm: 3000 mm: 400 mm: 155 mm: 490 mm: 700 mm: 15 : 160 MK: 24 : 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 60 - 1/16 Gänge/: 0.125 - 120 : 525 mm: 270 mm: 125 mm: 6 MK: 260 mm: 22 kW: 7500 kgdriven by manual transmission3-axes digital readoutquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 100120,00 turning length2.000 mm € 103850,00 turning length4.000 mm € 123510,00 turning length5.000 mm € 134810,00 turning length6.000 ...

: neu : Bulgarien : 81780 €: 1545.64 €: 760 mm: 3000 mm: 380 mm: 132 mm: 520 mm: 560 mm: 11 : 140 MK: 17 : 7,5 - 1015 1/min: 150 : 0.039 - 18 mm/U: 0.02 - 9 mm/U: 0.5 - 180 mm: 60 - 1/6 Gänge/: 0.125 - 45 : 410 mm: 150 mm: 105 mm: 6 MK: 225 mm: 15 kW: 4470 kgdriven by conventional transmission3-axes digital readoutquick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)3-jaw chuck Bison3295/DIN6350, Ø 400 mmspindle dead centerfour way rapid traverse devicefoot pedal brakelongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocktailstock quill reducermechanized movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 67770,00 turning ...

: gebraucht : 2015 : 1686 : prompt, Zwischenverkauf v : England : 14800 €: 1 : 330 mm: 1000 mm: 167 mm: 38 mm: 210 mm: 12 : 40 - 2500 1/min: 16 : 0.03 - 1 mm/U: 0.2 - 14 mm: 2 - 56 TPI Gänge/: 190 mm: 92 mm: 42 mm: 3 MK: 110 mm: 2.2 kW: 1940 mm: 1000 mm: 1550 mm: 685 kg3-axis digital read out Newall4-jaw chuck Bison diameter 160mm with inside and outside jawsQuick-change tool post with 1 holdCoolant deviceChuck protectionSteel holder protectionLead screw coverMachine lightManual brakeOperating manual in German with EC declaration of conformityBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live demonstration via video call• R ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 87350 €: 1650.92 €: 540 mm: 1500 mm: 85 mm: 310 mm: 350 mm: D1-8 : 1/20 MK: 3 : 27 - 2250 1/min: 5000 mm/min: 8000 mm/min: 280 mm: 75 mm: 5 MK: 190 mm: 9 / 13,5 (S1 / S6 40%) kW: 0.02 mm: 0.016 mm: ISO3655 : 3340 mm: 1905 mm: 2235 mm: 3400 kgTHREE OPERATING MODES: CNC / TEACH-IN / MANUALSiemens 828D CNC control• 12-inch colour screen• Linear interpolation• Circular interpolation• Helical interpolation• Skip function• Workpiece coordinate system• Coordinate system rotation• Rigid tapping• Mirror image, scaling and rotation• Turning cycle• ShopTurn softwareLarge spindle bore, with precision bearings for high accuracy and consistent cutting stability.Precision ball screw Ø 40 mm (Class C5) on the Z-axis and ball screw Ø 25 mm (Class C3) on the X-axis.2-axis AC servo motors50-300 mm roller-type tailstock.Manual tailstoc ...

: gebraucht : 2023 : 1675 : prompt, Zwischenverkauf v : Bulgarien : 17600 €: 1 : 325 mm: 1000 mm: 165 mm: 32 mm: 190 mm: 200 mm: 5 : 4,5 MK: 12 : 85 - 2.000 1/min: 48 : 0.006 - 1.77 mm/U: 0.003 - 0.885 mm/U: 0.1 - 28 mm: 75 - 2,5 Gänge/: 0.1 - 1.75 : 150 mm: 95 mm: 40 mm: 3 MK: 100 mm: 2.2 kW: 2150 mm: 950 mm: 1350 mm: 770 kgdemo machine / mint conditionnet price (price for new machine € 23.970,00)driven by manual transmission3-axes digital readout Fagor 40iquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 160 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",incl. following optional equipment:1 lenght stopBUYING USED MACHINER ...

: neu : Bulgarien : 58370 €: 1103.19 €: 600 mm: 2000 mm: 300 mm: 80 mm: 400 mm: 400 mm: 8 : 90 MK: 3 : 20 - 100, 80 - 400, 400 - U/Min: 120 : 64 : 0.5 - 120 mm: 60 - 1/4 Gänge/: 0.125 - 30 : 315 mm: 130 mm: 90 mm: 5 MK: 230 mm: 11 kW: 3600 mm: 1500 mm: 1650 mm: 3110 kgIn contrast to the universal lathes, here the adjustment of the revolutions is infinitely variable by means of a frequency inverter.It is possible to ensure a ",constant cutting speed", (V-const), i.e. when changing the diameter to be machined, the speed remains unchanged and thus a higher accuracy and smoothness of the surface is achieved. At the customer&apos,s request, the machines can be manufactured with a reading of the linear displacement and positioning by mounting a digital display.driven by variable speed control (3 steps)3-axes digital readout Fagor with CSS (constant surface speed)quick change toolp ...

: neu : Bulgarien : 140320 €: 2652.05 €: 1320 mm: 3000 mm: 625 mm: 155 mm: 940 mm: 700 mm: 15 : 160 MK: 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min: 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 1/16 - 60 Gänge/: 0.125 - 120 : 685 mm: 270 mm: 125 mm: 6 MK: 260 mm: 30 kW: 8550 kgdriven by variable speed control (4 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 125460,00 turning length4.000 mm € 148950,00 turning ...

: neu : Bulgarien : 121770 €: 2301.45 €: 1090 mm: 3000 mm: 500 mm: 155 mm: 690 mm: 700 mm: 15 : 160 MK: 24 : 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 60 - 1/16 Gänge/: 0.125 - 120 : 525 mm: 270 mm: 125 mm: 6 MK: 260 mm: 22 kW: 7500 kgdriven by manual transmission3-axes digital readoutquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS turning length1.500 mm € 107020,00 turning length2.000 mm € 110650,00 turning length4.000 mm € 130410,00 turning length5.000 mm € 141610,00 turning length6.000 ...

: neu : Bulgarien : 96240 €: 1818.94 €: 860 mm: 3000 mm: 430 mm: 135 mm: 620 mm: 560 mm: 11 : 140 MK: 7 - 42, 28 - 170, 165 - 1 U/Min: 150 : 0.039 - 18 mm/U: 0.02 - 9 mm/U: 0.5 - 180 mm: 60 - 1/6 Gänge/: 0.125 - 45 : 240 : 435 mm: 150 mm: 105 mm: 6 MK: 225 mm: 15 kW: 4650 kgdriven by variable speed control (3 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)3-jaw chuck Bison3295/DIN6350, Ø 400 mmspindle dead centermain motor with frequency invertorfour way rapid traverse devicefoot pedal brakelongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocktailstock quill reducermechanized movement of tailstocklow voltage machine lampoperating manualmachin ...

: neu : Bulgarien : 89440 €: 1690.42 €: 760 mm: 3000 mm: 380 mm: 132 mm: 520 mm: 560 mm: 11 : 140 MK: 3 : 7 - 42, 28 - 170, 165 - 1 U/Min: 150 : 0.039 - 18 mm/U: 0.02 - 9 mm/U: 0.5 - 180 mm: 60 - 1/6 Gänge/: 0.125 - 45 : 410 mm: 150 mm: 105 mm: 6 MK: 225 mm: 15 kW: 4470 kgdriven by variable speed control (3 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)3-jaw chuck Bison3295/DIN6350, Ø 400 mmspindle dead centermain motor with frequency invertorfour way rapid traverse devicefoot pedal brakelongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocktailstock quill reducermechanized movement of tailstocklow voltage machine lampoperating manualmachine  ...

: neu : Bulgarien : 56920 €: 1075.79 €: 630 mm: 2000 mm: 315 mm: 103 mm: 430 mm: 400 mm: 11 : 120 MK: 21 : 12,5 - 1250 1/min: 120 : 0.04 - 12 mm/U: 0.02 - 6 mm/U: 0.5 - 120 mm: 60 - 1/4 Gänge/: 0.125 - 30 : 240 - 1 : 315 mm: 90 mm: 90 mm: 5 MK: 230 mm: 11 kW: 3310 kgdriven by manual transmission3-axes digital readoutquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 315 mmspindle dead centerlongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.000 mm € 53520,00 turning length1.500 mm € 54880,00 turning length3.000 mm € 61360,00 turning length4.000 mm € 67270,00 turning len ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 77850 €: 1471.37 €: 460 mm: 1000 mm: 56 mm: 230 mm: 350 mm: D1-6 : 1/20 MK: 3 : 33 - 3100 1/min: 5000 mm/min: 8000 mm/min: 280 mm: 75 mm: 5 MK: 190 mm: 9 / 13,5 (S1 / S6-40%) kW: 0.02 mm: 0.01 mm: ISO3655 : 2840 mm: 1905 mm: 2235 mm: 2900 kgTHREE OPERATING MODES: CNC / TEACH-IN / MANUALSiemens 828D CNC control• 12-inch colour screen• Linear interpolation• Circular interpolation• Helical interpolation• Skip function• Workpiece coordinate system• Coordinate system rotation• Rigid tapping• Mirror image, scaling and rotation• Turning cycle• ShopTurn softwareWith precision bearings ensuring spindle runout of less than 0.005 mm,for high accuracy and consistent cutting stability.Precision ball screw Ø 40 mm (class C5) on the Z-axis and ball screw Ø 25 mm (class C3) on the X-axis.2-axis AC servo motors20-160 mm roller-type  ...