Tronçonneuses

turning diameter: 460 mmturning length: 795 mmcontrol: MORI SEIKI M730 BM Swing diameter face slide: 590/360 mmspindle passage: 80 mmTraverse X/Z:: 260/795 mmtotal power requirement: 40 kVAweight of the machine ca.: 6,4 tdimensions of the machine ca.: 3.994 x 3.056 x 2.187 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 330 mmturning length: 510 mmcontrol: FANUC 18i - T turning diameter over bed: 600 mmturning diameter over slide: 550 mmx-travel: 250 mmz - travel: 580 mmy-travel: 100 (±50) mmb-axis: 0.001 mmrapid travel x/y/z: 20/7,5/24/ m/minrapid taverse: B- Achse 20 m/minc-axis: 4.500/ 6.000 °spindle passage: 76/ 45 mmspindle nose: A2#6 spindle turning speed range: 4.500/ 6.00 U/minspindle drive: 15/ 7,5 kWTurret: 12- fach Stationen Chip coveyor: Inkl. chuck: Hauptspindel 210 mmchuck: Subspindel 160 mmtotal power requirement: 50,7 kVAweight of the machine ca.: 4,9 tdimensions of the machine ca.: 3.118 x 1.705 x 2.076 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 850 mmturning length: 1280 mmcontrol: FANUC i SERIES bar capacity: 102 mmx-axis: 293 mmz-axis: 1280 mmturning speeds: 2800 U/minTorque: 6605 Nmtailstock quill diameter: 100 mmSpindle power: 22 kwDiametre over slide: 670 mmsize of pallet: 12,5 zolltotal power requirement: 42,04 kWweight of the machine ca.: 7350 kgdimensions of the machine ca.: 4.530×2.105×2.020 mm- Main spindle- Max spindle speed 2.800 rpm- Speed ranges 2- Main spindle power 22 kW- Main spindle torque 6.605 Nm- Spidle nose A2 – 11Turret - No of tool stations 10- Turret tool size 25 x 25 mm- Max boring bar size 50 mm.- Indexing Time 0,15 s- Tailstock Quill diameter 100 mmQuill travel 100 mmQuill bore taper MT#5Equipment- Chip conveyor- 3 Jaw-Hydraulic chuck Ø315 mm - Automatic Tool pre-setter - Hydraulic steady rest SMW Autoblock SLU-X-3.2-MSThe ...

turning diameter: 470 mmturning length: 720 mmcontrol: FAGOR 8055 TC/B centre height: 366 mmdist. between centers: 3000 mmc-axis: 0Drive tool: feed speeds: 8.000 mm/minmain spindle bore: 92 mmspindle nose: DIN-55027-11 spindle diameter in front bearing: 150 mmspindle rate: 0-1600 Spindle power: 17/20,5 max. torque on the spindle: 1590/1920 quill:: 100 mmtail stock: 200 mmtaper: Morse 6 : Sauter VCI50 Ø400 mm. bed width: 430 mmtotal power requirement: 28 kWweight of the machine ca.: 5.700 kgdimensions of the machine ca.: 6.800 x2.385 x1.765 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 660 mmturning length: 1.542 mmcontrol: MSX-701 III greates pass round over bed: 730 mmspindle passage: 80 mmdist. between centers: 1.862 mmX1: 750 Z1: 1.550+100 mmX2: 195 mmZ2: 1.525 mmy-axis: +-210 mmb-axis: +- 120 mmcoolant tank: 640 l: Number of spindles: 2 St.total power requirement: 90 kVAweight of the machine ca.: 25 tdimensions of the machine ca.: 6.800 x 3.200 x 2.900 mmRapid traverse rate (X1, Z1 Axis) 50 m./min.Rapid traverse rate (X2 Z2 Axis) 30 m./min.Rapid traverse rate (Y Axis) 30 m./min.Rapid traverse rate spindle 2 ZS 30 m./mm.Rapid traverse rate B axis 40 rpmRapid traverse rate C axis 250 rpmSpindle 1:Speed 4.000 rpmNumber of speed ranges 2Nose JIS A2-8C axis in spindle 1 IMin indexing increment spindle 1 0.0001ºPower 26/22 kWMax torque 724 Nm3-jaw automatic chuck KITAKAWA B-212 A8 Chuck size 304 mm.Chuck h ...

x-travel: 155 mmy-travel: 170 mmz-travel: +- 25 mmchucking diameter: 135 mmDrive: 3,7 kWspindle speed:: 8.000 Turret: 2 a 10 c-axis: 0,0001 0y-axis: +- 25 mmNumber of working hours: 10.000 htotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diamètre de tournage externe : 4.300 longueur de tournage : 3.600 mm diamètre de rotation sur le lit glissière : 3.040 mm passage de la barre : 140 mm plage de vitesse de rotation : 0,18-92 U/min affichage numérique : HEIDENHAIN puissance totale requise : 56 kWpoids de la machine env. : 55 tdimensions de la machine env. : 9.450 x 4.700 x 4.400 mNouveau en 1976 / 2019- 8 mandrin à mâchoires indépendantes 2.500 mm.

Screw-cutter Lathe Ryazan 1M63 (Russie), 1981, pièce de travail maximum diamètre au-dessus du lit 630 mm; pièce de travail longueur maximale 2800 mm. prix 4300 EUR.

: : VDI 20 : number: 3 Stück im Paket : Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.