sous-catégories
(troisième niveau de catégorie)
Fabricant:
(Catégorie: 102)
Longueur de rotation : 650 mm Axe Z 650 mm Axe X 170 mm Auction-ID: A7-44493-2155
number of spindles:6 spindle passage:22 mm?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on ?Materail to be processed on the machine: Steel ?Production with OIL Machine has only Single-NCU without PCU.The complete energy supply of all 6 main spindles was replaced in April 25.
number of spindles:8
Lathe with 4 tools only for 3-cylinder crank shaft
weight of the machine ca.:18 tcentre distance:700 mmmax. swing diameter:200 mmLathe with 4 tools only for 3-cylinder crank shaft
weight of the machine ca.:18 tcentre distance:700 mmmax. swing diameter:200 mmLathe with 4 tools only for 3-cylinder crank shaft
max. workpiece diameter:29 mmmin. workpiece diameter:26 mmworkpiece length:66 mmthe system was originally delivered for the following workpiece sizes: diameter 26mm - 29mm length 65mm - 66mmChanging parts in the clamping device, handling, etc. would probably result in diameters of up to approx. Ø50mmTotal length will probably be almost 400 mm possible with a few conversions.Also dependent on tool lengths, machining lengths on the component, etc.Workpiece: Piston pin Drawing number: WHT 000 718, WHT 000 718 A Workpiece dimensions (Ø, WxH): Ø26 x 66; Ø29 x 65 Length: 66 or 65 mm Material: 17Cr3Quantity: xxx parts / year Cycle time: 5 sec. However, workpiece lengths up to 600mm are manageable. The machining diameter can be adjusted if the appropriate tools are available. The clamping station can currently only accommodate this product. However, this can be adapted by changing the clampi ...
turning diameter:250 mmswing diameter:250 mmturning height:200 mmtotal power requirement:37,7 kWchuck diameter:315 mmspindle speed max.:5500 1/mintravel -x axis:625 mmtravel -y axis:+100/-80 mmtravel -z axis:250 mmworktool system:VDI 30+40 weight of the machine ca.:8 tThe synchronous spindle is powered with 37.7 kW of power, a torque of 300 Nm and a maximum speed of 5,500 rpm.Typical components are ball cages, ball hubs, gear wheels, sliding sleeves,pump wheels, flanges, synchronizer rings, bearing rings and pivot pins.The machine bed is made of Hydropol, a mixture of special concrete and steel, which ensures the greatest smoothness and precision even with larger components and powerful machining.
7800 h Heures de broche Auction-ID: A7-44493-2153
number of spindles:6 spindle passage:18 mmturning length:63/50 mmweight of the machine ca.:8,6 tspindle drive motor:11 kW
: neu : ca. 4 Monate ab Auftragse : Bulgarien : 75740 €: 1431.49 €: 600 mm: 1500 mm: 300 mm: 80 mm: 400 mm: 400 mm: 8 : 90 M: 3 : 20 - 100, 80 - 400, 400 - U/Min: max. 8 m/min: max. 8 m/min: 290 mm: 90 mm: 5 MK: 225 mm: 11 kW: 3,5 / 22 kW/Nm: 1,75 / 11 kW/Nm: 120 Nm: 1250 daN: 1050 daNFast and simple communication between the operator and the lathe.Simple workpieces are machined in the same way as on the universal lathe, but more efficient.Complicated workpieces are machined in the same way as on the universal lathe, but faster.Complicated workpieces are machined in the same way as on the CNC lathe, but easier.Based on the controller Schneider Magelis the intelligent, self-developed ZMM Sliven softwareleads the operator also without programming skills simple and fast to the finished workpiece.The interface is simple and with large icons, which is convenient in a specific work environ ...
: neu : 2025 : 010105 : prompt, Zwischenverkauf v : Bulgarien : 47390 €: 905.15 €: 1 : 600 mm: 2000 mm: 300 mm: 80 mm: 400 mm: 400 mm: 8 : 90 M: 21 : 20 - 2000 1/min: 120 : 0.04 - 12 mm/U: 0.02 - 6 mm/U: 64 : 0.5 - 120 mm: 60 - 1/4 Gänge/: 0.125 - 30 : 315 mm: 130 mm: 90 mm: 5 MK: 230 mm: 7.5 kW: 3600 mm: 1250 mm: 1400 mm: 3110 kgdriven by conventional gearbox3-axes digital readout Fagor 40iquick change toolpostAmestra Multisuisse type C with 4 holders (3 square, 1 round)3-jaw chuck Bison3204/DIN6350, Ø 250 mmspindle dead centerfour way rapid traverse deviceelectromagnetic brakelongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS (PRICES ON ...
: neu : Bulgarien : 109100 €: 2061.99 €: 890 mm: 3000 mm: 400 mm: 155 mm: 490 mm: 700 mm: 15 : 160 M: 24 : 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 60 - 1/16 Gänge/: 0.125 - 120 : 525 mm: 270 mm: 125 mm: 6 MK: 260 mm: 22 kW: 7500 kgdriven by manual transmission3-axes digital readoutquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 94 720,00 turning length2.000 mm € 98 220,00 turning length4.000 mm € 117 110,00 turning length5.000 mm € 128 100,00 turning length6.00 ...
diamètre de tournage : 480 mm, longueur de tournage : 800 mm. contrôle : Système TX8F, diamètre de rotation sur la glissière : 240 mm, passage de broche : 65 mm, diamètre : 200 mm, vitesses de rotation : 4000 U/minpower : 30 kW, puissance totale requise : kWpoids de la machine, environ : 4,3 tdimensions de la machine, environ : outils motorisés. Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
turning diameter over bed: 1350 mmturning diameter over slide rest: 1020 mmcentre distance: 6000 mmturning speeds: 5-500(x24) U/minspindle passage: 120 mmturning dia. in gap: 1700 mmtotal power requirement: 27/41 kWweight of the machine ca.: tdimensions of the machine ca.: mPower compound4-jaw chuck, Ø 1.000 mmSteady rest, Ø 500 mmWork restRapid tool postCoolant systemRapid traverse2-Axis Trak D.R.O.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 1400 mmswing diameter: 1600 mmturning height: 1200 mmturning speed range - milling: 1 - 240 U/minControl: Siemens SIN 820T ram head - cross travel: 1000 mmtotal power requirement: 55 kWweight of the machine ca.: dimensions of the machine ca.: mA.T.C. 12 positionsToolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 660 mmturning length: 2000 mmcontrol: Fagor 8050 turning diameter over bed slide: 370 spindle diameter: 104 mmtotal power requirement: 18 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 2100 mmturning diameter over slide rest: 1300 mmturning length: 6800 mmworkpiece weight: 25000 kgmain drive motor: 140 kWControl: Siemens type: 840 C faceplate: 1100 mmbed width: 2500 mmsteady: 800 mmsteady: 800 mmsteady: 800 mmsteady: 600 mmchip conveyor: Speed: 1,25 - 40 U/min.Speed: 45 - 175 U/min.total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 1050 mmturning diameter over slide rest: 640 mmturning length: 10000 mmturning dia. in gap: 1310 mmspindle diameter: 120 mmspeed: 6-500 (x16) U/minvoltage: 380 Vtotal power requirement: 30 HPweight of the machine ca.: dimensions of the machine ca.: m4-Jaw chuck, Ø 1.000 mmSteady Rest, Ø 700 mm 2 Axis Sony D.R.O.4 Way toolpostCoolant systemRapid traverseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 1800 mmturning height: 1600 mmturning diameter over bed: 2150 mmturning speeds: 3,15 - 250 U/minvoltage: 400 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 800 mmturning diameter over slide rest: 530 mmturning length: 8000 mmturning dia. in gap: 1080 mmspindle diameter: 95 mmspeed: 8-800 (21x) U/mintotal power requirement: 15/22 kWweight of the machine ca.: tdimensions of the machine ca.: m4-Jaw chuck3-Jaw chuck2x Steady Rest4-Way toolpostThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 930 mmturning diameter over slide rest: 630 mmturning length: 6000 mmturning dia. in gap: 1250 mmspindle diameter: 95 mmspeed: 8-800 (x24) U/mintotal power requirement: 22 kWweight of the machine ca.: 1100 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 2000 mmturning diameter over slide rest: 1050 mmturning length: 7000 mmspeed: 1,6 - 250 U/minvoltage: 380 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: max.: 4000 mmturning diameter over slide rest: . mmturning length: 7700 mmspeed: 0-750 u/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 800 mmturning diameter over slide rest: 540 mmturning length: 3500 mmturning dia. in gap: 1100 mmspindle diameter: 95 mmspeed: 6 - 630 (18x) U/minchuck diameter: 3-jaw 400 mmchuck diameter: 4-jaw 700 mmtotal power requirement: 22 kWweight of the machine ca.: tdimensions of the machine ca.: mPower compound4 way toolpostSteady rest Ø 400 mm3 Axis D.R.O.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 2400 mmturning length: 6000 mmcontrol: Siemens 880T Turning diameter over slide: 1400 spindle diameter: 320 mmspeed: 0.4 - 1000 m/minvoltage: 380 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 2500 mmturning height: 1500 mmturning diameter over bed: 2700 mmturning speeds: 1,9 - 60 (16x) U/minvoltage: 380 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 1020 mmturning diameter over slide rest: 620 mmturning length: 4000 mmturning dia. in gap: 1250 mmspindle diameter: 105 mmspeed: 8-1250 U/minvoltage: 380 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 1170 mmswing diameter: 1520 mmturning height: 1000 mmstroke: 660 mmturning speed range - milling: 9 - 313 U/mintotal power requirement: 50 HPweight of the machine ca.: dimensions of the machine ca.: m4 positions turret on rail4 positions turret on side headPower elevating railThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 900 mmswing diameter: 1220 mmturning height: 810 mmstroke: 660 mmturning speed range - milling: 8 - 300 U/mintotal power requirement: 50 HPweight of the machine ca.: dimensions of the machine ca.: m4 positions turret on rail4 positions turret on side headPower elevating railThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Surplex GmbH
1.500 € 
