rectifieuses bois machines d'occasion à vendre (649)

grinding length: 500 mmgrinding width: 200 mmworkpiece height: 250 mmturning speeds: 1000 - 4000 U/mintable surface area: 600 x 200 mmgrinding wheel size: 225 x 20 x 51 mmgrinding spindle drive: 1,5 kWtable feed: 1 - 20 m/mintotal power requirement: 2,6 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2,6 x 1,6 x 1,8 mAutomatic feed, 2-axis digital display, stepless speed control,Water-cooled sine angle magnetic clamping plate 400x135mm, 10mm magnetic pitchSony digital display with scales for transverse and height adjustmentSwing-out dresser on the grinding headTable direction reversal with contactless inductive switchesLOSMA belt filter coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 4 St.sanding width: 190 mmSanding height max.: 180 mmLÖWER-DoubleSander Solid DSM 2004----------------------------------Double-sided four-belt single wood sander forSanding solid wood such as window frames etc.Highly stable top design with innovative details. Suitablefor high continuous loads even with higher chip removals.- sanding units arranged one after the other for pre-grinding,Fine sanding and finishing sanding, each from above and below1. Belt sanding unit with heavy steel roller2. Belt sanding unit with rubberized roller and shoe3. Finishing unit with fiber brush- Directly driven grinding rollers for slip-freePower transmission- maintenance and wear-free CERMET-coated grinding wheelsshoes with very good thermal conductivity and absoluteDimensional accuracy- External cooling of the grinding zones for cooler grindingand longer sanding belt service life- f ...

Table dimensions: 1200 x 500 mmsanding belt measurements: 90 mmWeight: 150 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 2 st.sanding width: 190 mmSanding height max.: 4-180 mmHESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE-----------------------------------------------------Manufactur ers description:-----------------------------------------------------Compa ct design designed according to modern principles. Quiet andvibration-free operation thanks to rigid, stable machine housing andspecial insulation. Work safety device in accordance with the EC Machinery Directive with the dust-tested certificate.Offset grinding units with large-dimensioned tension rollers forgood heat dissipation and stable sanding belt guidance. Sanding units withforced sanding belt oscillation. 2-point sanding dust extraction directlyon the sanding roller. Airborne dust extraction on the large tension rollers. Integratedsanding belt blower for longer service life of the sanding belts. Integrated brushing an ...

Number of sanding units: 4 St.sanding width: 190 mmSanding height max.: 180 mmControl: ja weight: 3300 kgDimensions (L/W/H): 2600x920x1890 mmDust suction hood: 2x180, 2x120 mmLöwer DSM 2004 Double-Sided Sanding Machine---------------------------------------------4-Belt Sander + Disc Unit (Top/Bottom)Manufacturers Description:--------------------------------------------- Double-sided, four-belt, single-wood sander for sandingsolid wood such as window frames, etc.Highly stable, top-quality design with innovative details. Suitable for highcontinuous loads, even with high material removal rates.- Sequentially arranged grinding units for roughing, fine grinding,and finishing, each from above and below1. Belt grinding unit with heavy steel roller2. Belt grinding unit with rubberized roller and shoe3. Finishing unit with fiber brush (see optional equipment below)- Direct-drive grinding rollers ...

Number of sanding units: 8 St.sanding width: 25-240 mmSanding height max.: 15-140 mmB ROBA Fentech, Fully automatic sanding machineDesigned for sanding individual wooden components in window manufacturing, it is suitable for the following applications:- Fine sanding of wood- Sanding after impregnation- Intermediate lacquer sandingAdvantages of the ROBA Fentech system:- Automatic workpiece detection via scanner at the machine infeed- Motorized positioning of sanding units- Oscillating side units optimize abrasive utilization- 400 mm diameter sanding tools optimize sanding quality- Angled profiles are sanded at their optimal angle- Can be used as a straight-through machine or in reversing mode for one-person operation- Vacuum transport system for processing short parts- Enclosed design for enhanced workplace safety and a dust-free environment- Compact, space-saving design- Freely selectabl ...

Number of sanding units: 10 St.sanding width: 25-240 mmSanding height max.: 15-140 mmMB ROBA Fentech ORBITAL, fully automatic sanding machineDesigned for sanding individual wooden components in window manufacturing, it is suitable for the following applications:- Fine wood sanding- Impregnation sanding- Intermediate lacquer sandingAdvantages of the ROBA Fentech principle:- Automatic workpiece detection via scanner at the machine infeed- Motorized positioning of sanding units- Oscillating side units optimize abrasive utilization- 400 mm sanding tool diameter optimizes sanding quality- Angled profiles are sanded at their optimal angle- Can be used as a through-feed machine or in reversing mode for one-person operation- Vacuum transport system for processing short parts- Enclosed design for enhanced workplace safety and a dust-free environment- Compact, space-saving design- Freely selectabl ...

Dimensions de la table : 800 x 2790 mm Gorge : 550 x 310 mm Puissance du moteur : 4,0 kw Mesures de bande de ponçage : 150 x 7800 mm : : : 2600 Largeur de fonctionnement : 850 mm Puissance du moteur : kWLengue de papier ponçable : mm Hotte d’aspiration à poussière : 180 mm Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

Number of sanding units: 4 st.sanding width: max. 200 mmSanding height max.: 7-150 mmWorking speed: 8-16 m/minBand Speed: 18-30 m/secStähle-Hess Sanding Machine Saturn-Duo-----------------------------------------------Manufacturers Technical Description:Stähle-Hess Finish Sanding Machine, Model Saturn DuoFeaturing 2 sanding units, plus additional upper and lower Roto-Finishsanding units.1 Upper sanding belt1 Lower sanding belt2 Upper Roto-Finish sanding units2 Lower Roto-Finish sanding unitsWorkpiece DimensionsHeight: 7–150 mmWidth: max. 200 mmMinimum length: 300 mmBelt speed: 18–30 m/s (variable)Feed rate: 8–16 m/min (variable)-----------------------------------------------Price for the above-mentioned machine available upon request!-----------------------------------------------Note: This machine was previously used in conjunction with aWeinig Variomat four-sided planer/moulder ...

Number of sanding units: 2 st.sanding width: 300 mmSanding height max.: 300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Brushing machine brand: Ecoline Type: Rustikmat 2-1000 New machine 2 brushes More stability due to the lower brush position Length of the brushes 1000 mm; Diameter 270 mm. Power 4 kW per brush. Each brush can rotate in synchronism and counter-rotation. Working width: 1000 mm Working thickness: 120 mm. Workpiece dimensions: Min. length: 350mm Max. Width: 1000mm Max. Thickness: 120mm Electric adjustment of thickness, speed and feed with digital display. Spindle diameter 50 mm. Infinitely variable feed: 0 - 12 m/min. The speed of the brushes and the feed speed are controlled by frequency converters. The heavy machine bed allows deep structuring of the plates.

Brush grinding machine Brand: Ecoline Type: B Sand 5 New machine The B Sand 5 as a high-quality solution for your production. The individual equipment offers many possibilities. In addition to panels and profiled doors, sash surfaces can also be processed, for example. A perfect result for different types of materials and surfaces: - Solid wood, MDF, veneered parts... - impregnated, primed surfaces... Technical data: Workpiece dimensions: Min. length: 550 mm Min. thickness: 10mm Max. Width: 1550 mm Max. Thickness: 120 mm Power: 11 kW Air pressure: 6-8 bar Suction nozzle: 6 x Ø120mm unit - vertical swiveling brushes for grinding the edges. diameter 400mm per brush, 2 motors á 1,1 kW - Horizontal sanding lamellar roller diameter 420mm, length 1600mm, 3 kW motor - Cross brush for sanding the wood fibers diameter 40mm, 1,5 kW motor - 2 round b ...

Profile grinding machine Brand Ecoline Type: Profilsand 6 New machine The customized solution for sanding individual parts such as for window profiles or moldings. Flexibility also in the choice of material and surface to be sanded: The Profilsand 6 can process different surfaces (impregnated, primed...) and types of wood (solid wood, veneered parts, MDF, etc.). The machine is equipped according to your specifications. Basic machine - Machine bed made of steel frame to ensure high stability. - Ground and therefore absolutely flat surface of the machine bed. - All movements of the aggregates are carried out on linear guides with recirculating ball bearings to ensure durability, precision and strength. - Feed via a driven conveyor belt. - Adjustable support rollers for supporting the parts between the lower units - Pressure rollers are positioned at the top alo ...

Brushing machine Brand: Ecoline Type: Rustikmat 2-600 New machine - Upper feeding belt with grip, power 0,75 kW frequency controlled. - Controlled lift of feed belt via ball bearing guidances for precision and a long product life. - Manual height adjustment - Additional pneumatical and self-regulating pressure of brushes via lower pressure pistons to process as well slight convex / concave formed surfaces to get an even finish. - Additional verticale and independant adjustment of the bruhes up to 20 mm via regulator to have a similar wear and tear and to change the depth of the structuration (stronger / slighter). - Transmission of the motors via v-belt. That is the cause of the low weight, minimal maintenance work and in relation a high trasmission. Suctiong housing for each brush. - Additional rollers at infeed and outfeed for more supporting space. 2 Brushes More ...

Manufacturer: Unitek, Type: 3N RRT 1100, Monting of the machine: Stahl/Gummi/Schuh, Sanding width mm: 1100, Sanding hight mm: 160, Number of sanding belts: 3, Shore roller 1: Stahl 160 mm, Shore roller 2: Gummi 220 mm, Walze 3 Shorehärte : Schuh 50 mm, Band 1 Leistung kW : ca. 15, Band 1 Schleifbandgeschwindigkeit m/s : 18, Band 2 Leistung kW : ca. 15, Band 2 Schleifbandgeschwindigkeit m/s : 16, Band 3 Kombiaggregat Walze/Schuh: yes, Band 3 Leistung kW : ca. 15, Band 3 Schleifbandgeschwindigkeit m/s : 14, Table hight adjustment by engine: 0,25 kW, Continous adjustable feeding speed m/min: 4-20, Transportbandantrieb kW: 1,5,

Manufacturer: Sandingmaster Breitbandschleifmaschine , Type: SA-3202-1100, Year: 1996, Monting of the machine: Walze/Kombi, Sanding width mm: 1100, Sanding hight mm: 140, Number of sanding belts: 2, Sanding belt dimensions: 2150-1150, Werkstückdickenmesseinrichtung mittels Ultraschallsensor : yes, Elektronische Tastung mm: yes, Frequency control of belts: Band 2, Längsschleifaggregate: 2, Rubber roller: yes, Steel roller: Gummi ca.80 shore, Band 1 Leistung kW : ca.10, Belt 1 shoe unit: yes, Band 2 Leistung kW : ca.10, Combi unit roller/shoe: 1, Continous adjustable feeding speed m/min: 8-15, Transportbandantrieb kW: 1,5, Vacuum table: yes, Segment sanding shoe: yes, Weight in kg: 2500, Year :1996

Manufacturer: Costa Kalibrieranlage, Type: KA CC 1350, Year: 2007, Control: Siemens/KEB, Monting of the machine: 2x Stahlwalze geriffelt, Sanding width mm: 1350, Sanding hight mm: 120, Number of sanding belts: 2, Sanding belt dimensions: 2620 X 1380, Table hight adjustment by engine: yes, Steel roller: 2, Längsschleifaggregate: 30, Belt 2 shoe unit: 22, Band 2 Schrägstellbar Grad : no, Band 2 Innenliegendes Drucklamellenband : nur Gegenlauf, Table hight adjustment by engine: yes, Elektronische Tastung mm: 8-20, Separation of sampling in mm: 2,2, Table hight adjustment by engine: variabel, Continous adjustable feeding speed m/min: yes, Constant table hight: no, Brushing unit: yes, Werkstück-Abstrahleinrichtung: 3400, Diameter/ brush bristles: yes, wast cleaning: Pneumatische Absaugvorrichtung dabei, Oszilation dabei, Year :2007

Manufacturer: Heesemann 5 Aggregate, Type: LSM 8, Year: 2005, Control: Heesemann, Monting of the machine: Stahlwalze/Querband/Längsband/Längsband/Längsband/Bürste, Sanding width mm: 1300, Sanding hight mm: 3-80, Number of sanding belts: 5, Sanding belt dimensions: 2620 X 1350, Konstantentisch: yes, Elektronische Tastung mm: yes, Separation of sampling in mm: 32, Frequency control of belts: 2, Transverse sanding units: 1, Längsschleifaggregate: 3, Bürstenaggregate: yes, Steel roller: 1, Bürstenaggregate: yes, Band 1 Leistung kW : 37/Walze, Band 1 Schleifbandgeschwindigkeit m/s : 28, Belt 2 shoe unit: Querschleifaggregat, Band 2 Kombiaggregat Walze/Schuh: zuschaltbare Stahlwalze, Band 2 Leistung kW : 18,5, Band 2 Schleifbandgeschwindigkeit m/s : 0,5-24, Band 3 Leistung kW : 20/24, Band 3 Schleifbandgeschwindigkeit m/s : 10-20, Band 4 Leistung kW : 18,5, Band 4 Schleifbandgeschwin ...

Manufacturer: Heesemann, Type: LSM 8, Year: 1995, Control: Heesemann, Sanding width mm: 1350, Sanding hight mm: 3 - 140, Number of sanding belts: 2, Sanding belt dimensions: 2620 x 1350, Table hight adjustment by engine: no, Band 1 Leistung kW : 11, Band 1 Schleifbandgeschwindigkeit m/s : 0,3 - 12, Band 2 Leistung kW : 11, Band 2 Schleifbandgeschwindigkeit m/s : 0,3 - 12, Frequency control of belts: yes, Table hight adjustment by engine: no, Continous adjustable feeding speed m/min: 8 - 40, Transportbandantrieb kW: 4,0, Intermediate sanding of lacquer: yes, Vacuum table: 5,5, Noise enclosure: yes, Brushing unit: 4,0 + 1,5 kW, Texturing brush diameter: 250, Levelling brush for paint: 150, Weight in kg: 8850, Year :1995

Manufacturer: Heesemann, Type: LSM8 U + LSM8 S, Year: 1997, Control: Heesemann, Monting of the machine: L / L / L , Equipment of machine 2: L / L / L, Double sided sanding line: yes, Sanding width mm: 1350, Sanding hight mm: 3 - 80, Number of sanding belts: 3 + 3 , Sanding belt dimensions: 2620 x 1350, Rollers: 2 + 2, Steel roller: 2 + 2, Band 1 Leistung kW : 45, Band 1 Schleifbandgeschwindigkeit m/s : 24, Band 2 Leistung kW : 37, Band 2 Schleifbandgeschwindigkeit m/s : 24, Band 3 Leistung kW : 13/17, Band 3 Schleifbandgeschwindigkeit m/s : 10/20, Continous adjustable feeding speed m/min: 3 - 15, Transportbandantrieb kW: 4 + 3, Abrasive belts at bottom: 3, Intermediate sanding of lacquer: no, Vacuum table: 15 / 5,5, Noise enclosure: yes, Brushing unit: yes, wast cleaning: 0,75 kW, Weight in kg: 11000+9000, Year :1997

Manufacturer: Heesemann, Type: MFA 8/Rechtsmaschine, Year: 1996, Monting of the machine: Längs/Bürste, Sanding width mm: 1350, Sanding hight mm: 3 - 140, Number of sanding belts: 1, Sanding belt dimensions: 2620 X 1350, Band 1 Leistung kW : 11, Belt 1 shoe unit: yes, Band 1 Schleifbandgeschwindigkeit m/s : 0,5 - 12, Elektronische Tastung mm: yes, Separation of sampling in mm: 16, Frequency control of belts: 1, Continous adjustable feeding speed m/min: 5 - 25, Transportbandantrieb kW: ca.3, Intermediate sanding of lacquer: yes, Constant table hight: yes, Vacuum table: yes, Segment sanding shoe: yes, Brushing unit: yes, Diameter/ brush bristles: 150, Year :1996

Manufacturer: Delle Vedove, Type: SPL /7/200, Year: 1995, Sanding width mm: ca.10-100, Sanding hight mm: 80, Sanding belts horizontal/bottom: 1, Bandschleifaggregate Stk.: 1, Bürstenaggregate Stck.: 3 links+3 rechts, Right side units Qty.: Band, Unit 1 tiltable: yes, Aggregat 1 kW: ca.1,5, Unit 2 slewable: Bürste, Aggregat 2 kW: ca.1,2, Unit 3 slewable: Bürste, Aggregat 3 kW: ca.1,2, Unit 4 slewable: Bürste, Aggregat 4 kW: ca.1,2, Unit 5 slewable: Bürste, Aggregat 5 kW: ca.1,2, Unit 6 slewable: Bürste, Aggregat 6 kW: ca.1,2, Unit 7 slewable: Bürste, Aggregat 7 kW: ca.1,2, Transport chain mm: yes, Feeding speed min-max m/min: 5-20, Intermediate sanding of lacquer: yes, Constant table hight: yes, Brushing unit: yes, machine ready for demonstration: yes, FREE TEXT: mit automatischer Schleifscheiben Zustellvorrichtung für Schleifscheibenaggregate/inkl Siko Apstapelanlage, Year :199 ...

Manufacturer: Heesemann, Type: LSM 8, Year: 1995, Monting of the machine: Quer/Längs/Längs/Längs/EA , Sanding width mm: 1300, Sanding hight mm: 150, Number of sanding belts: 3, Sanding belt dimensions: 5400 X 150/2620 X 1350, Belt 1Transverse sanding unit: yes, Band 1 Leistung kW : 13/17, Belt 2 shoe unit: yes, Band 2 Leistung kW : 13/17, Band 3 Kombiaggregat Walze/Schuh: Schuh, Band 3 Leistung kW : 13/17, Band 4 Kombiaggregat Walze/Schuh: Schuh, Band 4 Leistung kW : 13/17, Elektronische Tastung mm: yes, Separation of sampling in mm: 32, Frequency control of belts: no, Continous adjustable feeding speed m/min: 5-25, Constant table hight: yes, Vacuum table: yes, Brushing unit: yes, wast cleaning: EA 2, Year :1995

Manufacturer: Tagliabue, Type: PS 40 60, Year: 2001, Control: Siemens, Control: Siemens, Work piece width min-max mm: 20-350, Min.-max. workpiece height in mm: 10-60, Work piece length min-max mm: 450, Sanding hight mm: 60, Schleifaggregate links : 3, Schleifaggregate rechts : 3, Transverse sanding units: no, Profile sanding units: 3, Unit 1 tiltable: yes, Aggregat 1 kW: ca.1,2, Unit 2 slewable: yes, Aggregat 2 kW: 1,2, Unit 3 slewable: yes, Aggregat 3 kW: ca.1,2, Unit 4 slewable: yes, Aggregat 4 kW: ca 1,2, Unit 5 slewable: yes, Aggregat 5 kW: ca.1,2, Unit 6 slewable: yes, Aggregat 6 kW: 1,2, Number of frequency controlt belts: 5, Sanding belt speeds m/min: 5-15, Intermediate sanding of lacquer: yes, Shoes electr. controlled: yes, Constant table hight: yes, Brushing unit: 2, FREE TEXT: Maschinenbett rechts verfährt auf breite der Werkstücke, Year :2001

Manufacturer: Heesemann, Type: MFA 6, Year: 2011, Control: PC, Monting of the machine: Quer/Längs/Bürste, Sanding width mm: 1350, Sanding hight mm: 150, Number of sanding belts: 2, Sanding belt dimensions: 2150 X 1350, Steel roller: kombi, Belt 1Transverse sanding unit: yes, Elektronische Tastung mm: yes, Separation of sampling in mm: 16, Frequency control of belts: 2, Combi unit roller/shoe: yes, Continous adjustable feeding speed m/min: 5-15, Transportbandantrieb kW: 1,5, Intermediate sanding of lacquer: yes, Constant table hight: yes, Segment sanding shoe: yes, Brushing unit: yes, FREE TEXT: vakuumteppich/Zustand sehr gut, Year :2011

Manufacturer: Weber, Type: OFZ-KS 2, Year: 1993, Control: Weber, Monting of the machine: Quer/lkombi-Schuh/längs, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350/4650 X 150, Rubber roller: 1, Shore roller 1: 150 mm (gummi), Transverse sanding units: 1, Längsschleifaggregate: 2, Band 1 Leistung kW : 13/17, Band 1 Schleifbandgeschwindigkeit m/s : 11/22, Belt 2 shoe unit: Kombi, Band 2 Kombiaggregat Walze/Schuh: yes, Band 2 Leistung kW : 18,5, Band 2 Schleifbandgeschwindigkeit m/s : 2-20, Band 3 Kombiaggregat Walze/Schuh: schuh, Band 3 Leistung kW : 11, Band 3 Schleifbandgeschwindigkeit m/s : 2-20, Elektronische Tastung mm: yes, Separation of sampling in mm: 32, Frequency control of belts: 2, Combi unit roller/shoe: 1, Continous adjustable feeding speed m/min: 4-25, Intermediate sanding of lacquer: yes, Constant table hi ...

Manufacturer: Bütfering, Type: AWS 2CE 1100, Year: 1992, Monting of the machine: Walze / Schuh, Sanding width mm: 1100, Sanding hight mm: 150, Number of sanding belts: 2, Sanding belt dimensions: 1110 x 1900, Steel roller: yes, Band 1 Leistung kW : 15, Band 1 Schleifbandgeschwindigkeit m/s : 5 / 10, Band 2 Schuhaggregat: 11, Band 2 Schleifbandgeschwindigkeit m/s : 5 / 10, Band 2 Gleich und Gegenlauf: yes, Frequency control of belts: no, Transportbandantrieb kW: 1,5, Intermediate sanding of lacquer: no, Constant table hight: yes, Vacuum table: no, Noise enclosure: yes, Brushing unit: 0,55 kW, Weight in kg: 3300, Year :1992

Manufacturer: Viet, Type: S3 T T23TM, Year: 2007, Monting of the machine: Quer/Quer/Bürste , Sanding width mm: 1350, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 8700 X150 /2620 X 1350/, Table hight adjustment by engine: yes, Band 1Querschleifaggregat: 2, Band 1 Leistung kW : 22, Band 1 Schleifbandgeschwindigkeit m/s : 5-20, Band 2 Schuhaggregat: yes, Band 2 Leistung kW : 22, Band 2 Schleifbandgeschwindigkeit m/s : 5-20, Band 2 Drucklammellenband: yes, Separation of sampling in mm: 16, Frequency control of belts: 2, Table hight adjustment by engine: yes, Continous adjustable feeding speed m/min: yes, Transportbandantrieb kW: 1,5, Intermediate sanding of lacquer: yes, Constant table hight: yes, Vacuum table: yes, Pressure pads for short workpieces: yes, Segment sanding shoe: yes, Bürstaggregat : yes, Year :2007

Manufacturer: Hongtai, Type: 2 Walzen Schleifmaschine, Year: 2017, Control: Weinwiev, Monting of the machine: Walze/Walze/Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 2, Sanding belt dimensions: 2620 X 1350, Shore roller 1: ca.40, Shore roller 2: ca.60, Band 1 Leistung kW : ca.15, Band 1 Schleifbandgeschwindigkeit m/s : regelbar, Band 2 Leistung kW : ca.15, Band 2 Schleifbandgeschwindigkeit m/s : regelbar, Frequency control of belts: 2, Continous adjustable feeding speed m/min: 10-20, Vacuum table: yes, Diameter/ brush bristles: ca.200, Weight in kg: 5000, Year :2017

Manufacturer: Heesemann, Type: LSM 8, Year: 2005, Monting of the machine: Q/L/L/Bürste, Sanding width mm: 1.300, Sanding hight mm: 3 - 140, Number of sanding belts: 3, Sanding belt dimensions: 3.250x1.350 6.200x150, Transverse sanding units: 1, Längsschleifaggregate: 2, Band 1 Leistung kW : 13 / 17, Band 1 Schleifbandgeschwindigkeit m/s : 12 / 24, Belt 2 shoe unit: yes, Band 2 Leistung kW : 13 / 17, Band 2 Schleifbandgeschwindigkeit m/s : 10 / 20, Band 3 Leistung kW : 13 / 17, Band 3 Schleifbandgeschwindigkeit m/s : 10 / 20, Elektronische Tastung mm: 32, Frequency control of belts: no, Continous adjustable feeding speed m/min: 6 - 30, Transportbandantrieb kW: 5,5, Intermediate sanding of lacquer: no, Constant table hight: yes, Vacuum table: 7,5 kW, Weight in kg: 8.000, FREE TEXT: mit Neuem Transportteppich/Maschine gereinigt und gestestet, Year :2005