Ponceuses à bande

SPÉCIFICATIONS: Zone de travail: 2400 x 800 mm Réglage en hauteur: 550 mm Puissance installée: 3 Kw Vitesse de déplacement verticale Longueur max. de la ceinture: 6650 mm Poulies : Ø 200 mm

Réf.: 0021 Marque: BOHR - AUSTRIA Modèle: 150/330 Tampon de ponçage pour ponceuse à bande Tampon de ponçage universel pour ponceuses à bande en graphite pour bois massif et placage - mm 330 x 150 Dimensions hors tout mm 330 x 150 x 100 h Poids kg 4

SPÉCIFICATIONS: Puissance installée : 5,5 kW 2 volants d’inertie Ø 450 mm Longueur de la bande de ponçage: 4900 mm 2 réglages de vitesse

largeur des bandes: 150 mmbande longueur: 2000 mmbande vitesse: 30 m/sdésoute totale requise: 3,6 kWpoids de la machine ca.: 138 tdimensions de la machine ca.: 995 x 490 x 890 mm

largeur des bandes: 75 mmbande longueur: 2000 mmbande vitesse: 30 m/s: 75 x 540 mmdésoute totale requise: 3 kWpoids de la machine ca.: 90 kgdimensions de la machine ca.: 995 x 415 x 890 mm

Nombre d’unités de ponçage: 2 st.Largeur de ponçage: env. 180 mm Hauteur de ponçage max.: 12 - 140 mm

Number of sanding units: 4 Stsanding width: 190 mmSanding height max.: 4-180 mmweight: 4200 kgHess Expert 4-belt single wood sanding machine--------------------------------------Ø Grinding at the bottom/topØ With 2 offset grinding units each (bottom and top)Ø Grinding units (bottom and top) connected in series according to theDressing principleØ Pre-sanding with coarse grit (calibrate)Ø Regrinding with fine grit (finish)Ø Central motorized height adjustment of the lower grinding unitsØ Central motorized and synchronous height adjustment of the entire upperGrinding and brushing units including the upper transport unitsØ Oscillating sanding belt utilization (during the sanding process)Ø Absolute power connection thanks to 5.5 KW motors and large dimensionsdrive drumsØ Oxide ceramic grinding shoe for- exact surface geometry- no adjustment work- permanent dimensional accuracy- comp ...

Number of sanding units: 2 st.sanding width: 190 mmSanding height max.: 4-150 mmHess Junior single wood sander---------------------------------basic structure:Stable, heavy welded construction made of thick-walled rectangular hollow profileswith additional, statically calculated bracing for optimalvibration damping.Staggered grinding units with large dimensionedBelt drive drums for slip-free belt travel. Two-point suction for directand airborne dust extraction with integrated blow-off device. grinding unitsin heavy steel plate construction as the basis for vibration-damped,quiet belt run. All guides as a ball linear set on hardened andpolished waves. Lasting precision thanks to protection against dust and dirtof the sphere linear sets. Contact roller and sanding pad in a balanced ratioto the grinding belt grain load. The large dimensioned drive drumsguarantee the full transmission of the ...

Number of sanding units: 2 st.sanding width: 190 mmSanding height max.: 4-150 mmHess Junior single wood sander---------------------------------basic structure:Stable, heavy welded construction made of thick-walled rectangular hollow profileswith additional, statically calculated bracing for optimalvibration damping.Staggered grinding units with large dimensionedBelt drive drums for slip-free belt travel. Two-point suction for directand airborne dust extraction with integrated blow-off device. grinding unitsin heavy steel plate construction as the basis for vibration-damped,quiet belt run. All guides as a ball linear set on hardened andpolished waves. Lasting precision thanks to protection against dust and dirtof the sphere linear sets. Contact roller and sanding pad in a balanced ratioto the grinding belt grain load. The large dimensioned drive drumsguarantee the full transmission of the ...

Number of sanding units: 2 st.sanding width: 190 mmSanding height max.: 4-150 mmHess Junior single wood sanding machine--------------------------------Machine in checking process at the moment!Basic structure:Stable, heavy welded construction made of thick-walled rectangular hollow profiles with additional, statically calculated reinforcements for optimalVibration dampening.Staggered grinding units with large dimensionsBelt drive drums for slip-free belt running. Two-point suction for directand airborne dust extraction with integrated blow-off device. grinding unitsin heavy steel plate construction as the basis for vibration-damped,quiet tape running. All guides as a ball linear set on hardened andpolished waves. Permanent precision thanks to dust and dirt protectionthe ball linear sets. Contact roller and sanding pad in a balanced ratiofor sanding belt grain load. The large-sized drive  ...

largeur des bandes: 75 mmbande longueur: 2000 mmbande vitesse: 37 m/mindésoute totale requise: 3 kWpoids de la machine ca.: 110 Kgdimensions de la machine ca.: 1x0,5x1 m

Ponceuse à courroie de banc Höfer Motor 4.2KW format 2.50 x 1.20 mètres

Rectifieuse à ruban pour bois et métal, distance des rouleaux env. 3000 mm

Working width: 300 mmNumber of sanding units: 6 st.Workpiece thickness max.: 8-230 mmWeight: 3100 kgLöwer double-sided grinding machine DSM 3304 GDR---------------------------------Manufacturer short description:Double-sided single wood sander for sandingof solid wood such as window wood orFurniture components made of MDF etc. Stable top designwith electronic articulated pressure shoes for fine grindingwell-planed or veneered surfaces.Sanding units arranged one after the otherFine grinding, disc aggregates for defibering grinding,Cleaning brush, from above and below as follows:1. Belt sanding unit with articulated pressure shoe2. Belt sanding unit with articulated pressure shoe3. Disc unit with brush sanding flaps diameter 320mm4. Cleaning brush with Tempicofibre trim diameter 120mm---------------------------------detailed long text of the manufacturers description as well as theInstall ...

Number of sanding units: 8 st.sanding width: 180 (260) mmSanding height max.: 160 mmDimensions (length / width): 3065x1600x1900 mmweight of the machine ca.: 1500 kgLöwer Leistomad SDWindow single wood intermediate sanding machine---------------------------------Machine factory tested by Löwer!Automatic fine grinding machine for wood grinding (smoothing, defibering andEdge breaking) or intermediate sanding of profiled window bars. With soft discTechnology for the visible surfaces as well as automatically safe profile andWidth adjustment.- 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm- 1 softisc unit Ø=200mm above 0.75kW,- 1 slat roller unit L=200mm above 0.75kW- 1 soft disc unit Ø=200mm below 0.75kW,- 1 lamella roller unit L=200mm below 0.75kW,- 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm- Linear guidance of all grinding units via linear ball  ...

Number of sanding units: 8 st.sanding width: 150 mmMachine can be inspected during production!Leistomat - Finisch and intermediate leveling machine Löwer LZ 8-------------------------------------------------- -------------------for finish sanding (smoothing, defibering and edge breaking)or intermediate sanding profiled window latch- Finish and intermediate sanding machine with eight sanding blade aggregates,2 surface units at the top (synchronism / counter-rotation)2 surface units below (synchronism / counter-rotation)4 profile units with angled arrangement top right,bottom right, top left, bottom left, all mating- linear guidance of all grinding units overLinear ball bearing sets on hardened shafts- Timed immersion of all in the opposite directionrotating grinding units directly above the incomingWorkpiece edges to avoid looping through thePrimer in the front edge area. By theIt is pos ...

Number of sanding units: 1 st.sanding width: 150 mmSanding height max.: 150 mmLöwer edge finishing machine MiniSpin NMachines for finishing and intermediate sandingEdges and profiles with a grinding spindlehorizontal or vertical.Motor 0.75 KWSpindle in vertical position for processing edgesSpindle in horizontal position, swung out to the sidefor processing longer profile bars or similar or inConnection with a combination grinding head for grindingof edges with a sanding flap discGrinding head can be swiveled +/- 20° for processingof slanted edgesWorking height / width 150 mmmax. diameter roller / brush < 300 mmFrequency converter for continuous adjustment of theSpindle speed 200 - 800 rpmTable size 400 x 800 mmtwo directions of rotation selectableOperating voltage 110 / 240 V, 50 / 60 HzSuction connection D=100 mmWeight approx. 100 kgincluding grooved base body D=180, L=150with Smartfl ...

Réf. : 0198 Marque : MABO - ITALIE Modèle : DELTA Ponceuse à bande à double col de cygne pour le bois, le métal, l’aluminium, les matériaux composites Longueur de la table mm 3000 Largeur de la table mm 800 Levage automatique de la table - Course verticale mm 550 Moteur 2 vitesses tr/min 1400/2800 - Hp 3/4 Diamètre de la poulie mm 200 Moteur d’aspiration Hp 0,5 Corde de secours Diamètre de la bouche d’aspiration mm 120 Dimensions hors tout mm 4400 x 1100 x 1550 h Poids kg 420

CARACTÉRISTIQUES TECHNIQUES: Machine à rectifier à bande horizontale Largeur de table mm : 800 Longueur de la table mm : 2.900 Largeur de bande abrasive mm : 1.500 Longueur de bande abrasive mm : 8.000 Hauteur de travail maximale mm : 600 Puissance du moteur principal HP : 4 Avec une chaussure abrasive

largeur des bandes: 75 mmlongueur de bande: 2000 mmvitesse de bande: 30 m/s: 75 x 540 mmpuissance totale requise: 3 kWpoids de la machine ca.: 90 kgdimensions de la machine ca.: 995 x 415 x 890 mm

A vendre ponçage d’occasion maschine steinemann. Papier de haut en bas, super large, 200kw. 1990 yc. Court utilisé.