rectifieuses bois machines d'occasion à vendre (662)

Manufacturer: Emme Elle, Type: LBA 1350, Year: 2007, Control: Emme Elle, Year: 2007, Control: Emme Elle, Diameter of brushes: 350 / 200, Units mounted upright: 4 + 4, Working table length mm: 8.000, Working table width mm: 1.350, Polierwalzen : 4, Diameter mm: 350, Disc sanding units: 4, Feeding speed continous adjustable: yes, Year :2007

Manufacturer: Costa Breitbandschleifmaschine, Type: CCT/1350, Year: 1995, Monting of the machine: Stahlwalze/Gummiwalze/Schuh, Sanding width mm: 1350, Sanding hight mm: 150, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Steel roller: yes, Band 1 Leistung kW : ca.30, Band 2 Leistung kW : ca.30, Band 3 Leistung kW : 17, Continous adjustable feeding speed m/min: 10-25, Transportbandantrieb kW: ca.3, Constant table hight: yes, Vacuum table: yes, Brushing unit: yes, Weight in kg: ca.8000, Year :1995

Manufacturer: Costa, Type: KA CCC 1350, Year: 2003, Control: Costa, Sanding width mm: 1350, Sanding hight mm: 160, Number of sanding belts: 3, Sanding belt dimensions: 1350 X 2620, Rollers: 3, Längsschleifaggregate: 3, Bürstenaggregate: 1, Steel roller: 2+1 Gummi, Bürstenaggregate: 1, Band 1 Leistung kW : ca.20, Band 2 Leistung kW : ca.20, Band 3 Leistung kW : ca.20, Continous adjustable feeding speed m/min: 5-15, Transportbandantrieb kW: 2,2, Constant table hight: yes, Brushing unit: yes, Year :2003

Manufacturer: Emme Elle, Type: LBA 1350, Control: Emme Elle, Control: Emme Elle, Diameter of brushes: 350 / 200, Units mounted upright: 4 + 4, Working table length mm: 8.000, Working table width mm: 1.350, Polierwalzen : 4, Diameter mm: 350, Disc sanding units: 4, Fast exchange device: yes,

Manufacturer: Heesemann Struckturbürstenmaschine, Type: BM 8, Year: 2005, Monting of the machine: Brush/Brush/Brush, Number of units: 3, Working widht mm: 1300, Diameter of brushes: 400+400+150 mm, kW output motor: 7,5+7,5+1,5, Feeding speed continous adjustable: 13-65 m/min, Weight approx. kg: 6.000, Work piece width min-max mm: 1300, Year :2005

Manufacturer: Heesemann, Type: LSM 8, Year: 2005, Sanding width mm: 1300, Sanding hight mm: 3-80, Sanding belt dimensions: 2620x1350, Konstantentisch: yes, Längsschleifaggregate: 1, Band 1 Leistung kW : 18,5, Band 1 Schleifbandgeschwindigkeit m/s : 0,5-20, Continous adjustable feeding speed m/min: 13-65, Transportbandantrieb kW: 7,5, Vacuum table: 5,5 kW, Brushing unit: 150 mm - 1,5 kW, Weight in kg: 6.500, Year :2005

Manufacturer: Klingsopr, Hermes und Stracke, Designation: 1350 x 2620, FREE TEXT: alles cirka Angaben - 500er - 10 Stck / 320er - 31 Stck /240er - 20 Stck / 220er-10 Stck / 180er-36 Stck / 150er - 77 Stck / 120er - 44 Stck / 100er-22 Stck / 80er - 37 Stck / 60er-59 Stck /40er-3 Stck - meist Neu und originalverpackt ,

Manufacturer: Heesemann, Type: FGA 6, Year: 1989, Monting of the machine: L, Sanding width mm: 1350, Sanding hight mm: 80, Number of sanding belts: 1, Rollers: no, Cross sanding unit: no, Shoe unit: yes, Shoe unit: yes, Elektronische Tastung mm: yes, Power belt 1 in kW: 11, Intermediate sanding of lacquer: yes, Constant table hight: yes, Segment sanding shoe: 40, Brushing unit: yes, Year :1989

Manufacturer: Boere , Type: BKS 900 / BBBg20/2, Year: 1985 / 1991, Monting of the machine: Walze Schuh + Walze/Schuh/Bürste, Double sided sanding line: yes, Sanding width mm: 900, Sanding hight mm: 150, Number of sanding belts: 4, Continous adjustable feeding speed m/min: 5 - 25, Rubber roller: yes, Shoe unit: yes, Shoe unit: yes, Schleifbänder unten: 2, Brushing unit: yes, Year :1985 / 1991

Hersteller : Venyeskob, Type: VBS 1300, Year: 1990, Number of units: 2, Engine power - kW: 4, Diameter of brushes: 420, Number of rotations controlled: yes, Units mounted inclined: 2, Fast exchange device: yes, Vacuum belt: yes, Feeding speed continous adjustable: yes, Entstaubungsbürste : no, Gewicht ca. kg : 2000, Year :1990

Manufacturer: Venyeskob, Type: Bürste, Year: 1991, Work piece width min-max mm: 10 - 300, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 8 - 60, Working widht max mm: 300, Number of brushes: 6, Brushes straight: 4, Brushes inclinedt: 2, Diameter of brushes: 150, Power per brush kW: 0,8, Feeding speed min-max m/min: 10 - 60, Year :1991

Hersteller : Venyeskob, Type: VBV, Year: ca. 1995, Number of units: 2, Engine power - kW: 0,75, Diameter of brushes: 230, Number of rotations controlled: 200 - 900, Units mounted inclined: 2, Fast exchange device: yes, Gewicht ca. kg : 400, Year :ca. 1995

Manufacturer: DMC, Type: Unisand K USK 1350 M3, Year: 2011, Software: DMC, Monting of the machine: Walze/Walze/Schuh, Sanding width mm: 1350, Number of sanding belts: 3, Rubber roller: 2, Längsschleifaggregate: 3, Weight in kg: 5350, Year :2011

Manufacturer: MB Maschinenbau, Type: ROBA-Simplex, Year: 2010, Control: yes, Monting of the machine: Schleiflamelle, Control: yes, Sanding belt hight: 100 mm, Table length: 1800 mm, Slewable sanding head: no, Sanding belt width max mm: 100, Work piece hight min-max mm: 80, Schleifbandgeschwindigkeit min-max m/sec: Frequenz, Bandantriebsmotor kW: ca.4, Oszillation mm: yes, Hight adjustment by hand wheel: yes, FREE TEXT: Luftpolsterkissentisch, Year :2010

Manufacturer: Bütfering, Type: Profiline SCR/RRR, Year: 2007, Sanding width mm: 1350, Sanding hight mm: 3-160, Number of sanding belts: 3, Sanding belt dimensions: 13702620, Rollers: 3, Rubber roller: 1, Steel roller: 2, Shore roller 1: 70 , Bürstenaggregate: 1, Band 1 Leistung kW : 37, Band 2 Leistung kW : 30 , Band 3 Leistung kW : 22, Continous adjustable feeding speed m/min: 4-20, Transportbandantrieb kW: 7, Constant table hight: yes, Vacuum table: yes, Weight in kg: ca. 2020, Year :2007

Manufacturer: Sorbini, Type: VS/32-BT-S 2000, Year: 1999, Number of units: 2, Working widht mm: 1350, Through running hight max mm: 80, Diameter of brushes: 150, Number of rotations controlled: yes, Units mounted upright: yes, Through running hight max mm: 80, Axle-diameter: 60, Engine power - kW: 1,5, Required space L x W x H mm: 2500 X 1200 X 1600, Type of use: Reinigen oberflächen, Year :1999

Manufacturer: Rippert, Type: ST 80 2500 R, Working widht max mm: 2000, Max. working depth in mm: 800, rotations rpm: 2900, Engine power kW: 1,5, Flow rate approx. m3/h: 1600, Working height in mm: 835, FREE TEXT: 2 Staubkästen/Filterreiniung,

Manufacturer: Heesemann, Type: FGA 6, Year: 1990, Monting of the machine: L, Sanding width mm: 1350, Sanding hight mm: 80, Number of sanding belts: 1, Cross sanding unit: no, Shoe unit: yes, Shoe unit: yes, Elektronische Tastung mm: 40, Power belt 1 in kW: 11, Constant table hight: 950, Vacuum table: yes, Pressure pads for short workpieces: yes, Brushing unit: yes, Year :1990

Manufacturer: Heesemann, Type: Profilklotzeinschleifgerät PWST, Bauyeshr : 1994, Control: hand, Sanding belt hight: 80, Tischlänge mm : 800, Work piece hight min - max mm: 80, Control panel on top: yes, radius sanding device: yes, Profilwerkzeug-Formschleifmaschine PWS-T für das massgenaue Schleifen der Konturen vorgearbeiteter Profilwerkzeuge, bestehend aus über Getriebemotor oszillierend, Profilwerkzeuge auf Kreissegment schwenkbar gelagert. , Year :1994

Manufacturer: DMC, Type: Topsand, Monting of the machine: Walze/Walze/Schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Rubber roller: 1, Steel roller: 1, Shore roller 2: 70, Längsschleifaggregate: ca.30, Belt 2 shoe unit: 22, Belt 2 synchronous and reverse run: 17, Combi unit roller/shoe: 5-25, Table hight adjustment by engine: ca.2, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Vacuum table: yes,

Manufacturer: Arminius, Type: ST 2, Year: 1991, Control: Hand, Table length: 2000, Work piece hight min-max mm: 10-60, Feeding speed min-max m/min: 5-25, Controllable slewable: yes, Number of sanding units: 2, 1st sanding motor controlled and tiltable: Schleifscheiben Typ Arminius, Power kW: 1,1, 2nd sanding motor controlled and tiltable: Schleifscheiben Typ Arminius, Power kW: 1,1, Power kW: 1,1, Power kW: 1,1, Control panel at bottom: yes, Hight adjustment by hand wheel: yes, Year :1991

Manufacturer: Evimatic, Type: HF 82 CB, Year: 2000, Control: yes, Control: yes, Work piece width min-max mm: min. 200, Schleifaggregate rechts : 2, Unit 1 tiltable: yes, Aggregat 1 kW: ca. 1,5, Unit 2 slewable: yes, Aggregat 2 kW: ca.1,5, Number of frequency controlt belts: 2, Brushing unit: 1, Total lenght mm: 2500, Year :2000

from training workshop - public institutionused, top condition, little usedmake Johannsentype T 94year of manufacture 1996machine no.No. 21397GS wood dust testedsanding length approx. 2600 mmsanding width approx. 850 mmbelt length approx. 7800 mm x 150 mmcranking right approx. 550 mmelectric adjustmentupper belt coverupper sanding supportbelt speeds 22 m/sec.right-left runsuction connection D 180 mm leftspace requirement approx. 2200 mm x 4050 mmweight approx. 700 kgstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery as seen,without guarantee and warranty

Machine à meuler WEINIG Rondamat 931, année 1989. Pour l’affûtage précis et la préparation des raboteurs et têtes de coupe dans le traitement du bois. Commandes conventionnelles / semi-automatiques typiques de l’année modèle, adaptées au rectificat profilé et plat avec alignement manuel assisté des outils. Conception industrielle fixe avec construction stable, technologie fiable et résultats de rectification constants. Révisé en 2025 et immédiatement disponible.

Trois machines d’aiguisage de lames de scie circulaire VOLLMER disponibles. 1) CANA/E, année 1988, série 9179 : affûtage semi-automatique de lames en carbure ou HSS, alimentation automatique mécanique des dents, inclinaison réglable et tête de meulage pivotante ; moteur AEG 0,75 kW, 2 800 tr/min, 220/380 V. 2) VOLLMER CNHV : machine semi-automatique mécanique pour lames à embout carbure, moteur AEG 0,55 kW, 2 750 tr/min, adaptée à environ 80–600 mm de diamètre. 3) VOLLMER 55/2 H2 : machine mécanique robuste pour lames HSS et carbure, 0,4 kW, 2 830 tr/min, plage de pale d’environ 80–500 mm. Construction en fonte massive. Dernier service 2024.

Meuleuse à tête raboteuse 1.0 GML 1400 Meuleuse entièrement automatique à tête de raboteuse avec alimentation variable du chariot, pas automatique et livraison automatique de l’acceptation. DONNÉES TECHNIQUES Diamètre de l’outil : 160 - 360 mm Longueur de meulage : 1 380 mm Graduation : (nombre pair de lames) 2 - 40 Z couteaux supplémentaires 1, 3 et 5 sélectionnables Puissance du moteur de meulage : 1,0 kW Vitesse de la meule, réglable : 3 000 - 6 000 tr/min. • Pour le meulage des arbres de rabotage LEDINEK ainsi que des têtes de rabotage hydraulique, • Supports de montage réglables pour arbres avec différentes distances de roulement, • Console de contrôle avec écran tactile 7,0 pouces LENZE • Résolution de l’écran tactile (pixels) 800x480 ; Graphismes, TFT Color • Entrée de l’angle de dégagement α la lame de rabot via une v ...

Peinture OTT MEGAtronic 11 Machine de meulage fine à calibration large à bande 1. Rouleau d’étalonnage de l’unité de meulage DM 150 mm 90 Shore 2. Unité de meulage avec sache de ponçage à membrane segmentée contrôlée électroniquement Largeur de travail 1100 mm MEGA - Ensemble de ponçage de laque Vitesse d’avance variable à l’infini de 3 à 15 m/min Puissance du moteur 1. Unité de meulage 11 kW Puissance du moteur : 2e unité de meulage 11 kW avec 2e vitesse de courroie 4,5 m/s Autres accessoires optionnels TABLE À VIDE GÉNÉRATEUR À VIDE 3 kW Rayonnement de bande Semelle de ponçage rigide pour le ponçage massif et le meulage du cadre La machine est ATELIER rénovée en TOP - ÉTAT d’une entreprise artisanale d’après le Lieboch d’origine

Kündig ENORM PRIMO – TOP MACHINE À TABLE CONSTANTE / automatique Livraison de tête Machine de meulage fine à calibration large à bande Combiné un rouleau de contact unitaire et un pneum. - Unité de sablage Énormatique Affichage numérique de l’épaisseur de la pièce à travailler Puissance du moteur à courroie : environ 9 kW Le niveau du rouleau de contact varie à l’infini selon l’échelle de grains Table d’entrée et table de sortie avec support à rouleaux Largeur de travail 1100 mm Vitesse d’avance 2,5 - 15 m/min La machine est RÉNOVÉE DE L’ATELIER d’après le Lieboch d’origine  

Professional Holzprofi Maker edge belt sander with pivoting grinding device up to 90°, height adjustable cast iron table, mitre gauge adjustable at both sides, graphit band rest, rubberized grinding cylinder, cast iron table for round grinding is included in the price.Technical Data:Engine power 2,2 kWGrinding cylinder support Ø 38, 50, 76 mmVoltage 400VTable length 900 mmTable width 300 mmTable height adjustable ca. 905 - 1027 mmBand length 2770 mmBelt speed 16m/secWeight 225kg

Holzprofi Maker oscillating edge belt sander, a solid sanding machine for craft and businessTechnical data:Band dimensions 2260 x 150 mmEngine power S1: 2,2 KW , 400 VTable length 750 mmTabhle width 250 mmBelt speed 16 m/secSpace required 1325 x 570 mmExtraction connection 100 mmWeight 156 kg