Fabricant:
(Catégorie: 106)
pressure: 130 tchamfer lenght: 3550 mmdistance between columns: 3050 mmstroke: 250 mmControl: Cybelec weight of the machine ca.: 11.600 kgdimensions of the machine ca.: 4000x2000x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pression : 160 longueur du chanfrein : 3200 mmContrôle : CYBELEC CybTouch 15 PS poids de la machine env. : 14.000 kgdimensions de la machine env. : mLes données de cette annonce ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
À VENDRE : PRESSE D’ESTAMPAGE À GRANDE VITESSE BRUDERER BSTA 50USL Avec chargeur automatique de bandes BBV 190 500 kN | 100 à 1120 spm | Entièrement automatique | Qualité suisse de premier ordre Points forts techniques : Force nominale : 500 kN Cadence de course : 100 à 1120 coups par minute Heures de travail : 41000 h Moteur principal : 22 kW Tension de commande : 24V DC Connexion électrique : 400V / 50Hz / 62 kVA Course réglable : 16 / 19 / 25 / 32 / 38 /44 / 51 mm Réglage de la hauteur de fermeture : 64 mm Dimensions de travail : Largeur maximale d’installation de l’outil : 1100 mm Largeur de passe de bande : jusqu’à 256 mm Surface du vérin : 980 × 420 mm Surface de la table : 1080 × 650 mm Hauteur d’entrée de la bande réglable : 60–140 mm Largeur maximale de la bande : 120 mm Pas d’alimentation maximal : 85 mm Épaisseur maximale ...
Une presse plieuse CNC Promecam (Amada) APX 103 est disponible. Force de pression : 1000 kN, largeur de travail : 3000 mm, distance entre les colonnes : 2550 mm, ouverture de l’espace : 370 mm, course : 100 mm, profondeur de la colonne : 400 mm, vitesse d’entrée : 70 mm/s, vitesse de pliage : 9 mm/s, vitesse de retour : 85 mm/s, puissance d’entraînement : 10,5 kW. Dimensions de la machine X/Y/Z : env. 3500mm/2200mm/2300mm, poids : env. 6400kg, commande : Amada Opérateur, heures de fonctionnement : 36261h. La presse est toujours en marche, donc les heures de fonctionnement changent continuellement. Documentation disponible. Une inspection sur place est possible.
pression : - TGorge : - mmcourse : - mmpuissance totale requise : - kWpoids de la machine env. : - tdimensions de la machine env. : - m
pression : 100 tGorge : - mmcourse : 8 - 116 mmpuissance totale requise : 8 kWpoids de la machine env. : 7,5 tdimensions de la machine env. : env. 2,5 x 2,5 x 3,5 mn° 0778Presse excentrique à colonne unique 1000 kNRéglage de la course 8-116 mm, vitesse de course 65/min, réglage du vérin 80mm, encombrement2,1x 1,7 x 3,1 m, Poids env. 7500 kgSupport inclinable, 10/20/30Zone de travail : table 800 x 560Entraînement : 8 kW
pression : 25 tGorge : - mmcourse : - mmpuissance totale requise : - kWpoids de la machine env. : 3 tdimensions de la machine env. : 2 x 2 x 2,4 m
pression : 6 tDistance entre les colonnes : - mmcourse : - mmpuissance totale requise : - kWpoids de la machine env. : 1 tdimensions de la machine env. : 1 x 1 x 2 m
pressure: 100 tstroke: 380 mmtable surface area: Arbeitsbreite 1100 mmpressure: 258 baroil volume: 46 dm³ajustment speed: 7,54 mm/secwork speed: 2,47 mm/secreturn speed: 9,06 mm/sectotal power requirement: 2,2 kWweight of the machine ca.: 970 kgInner diameter of the cylinder [mm]: 220Piston rod diameter [mm]: 90Diameter piston crown [mm]: 120- Movable cylinder (left-right)- Integrated pressure gauge- Pressure regulator- Two-speed hydraulic unit- Working table adjustable in height- Joystick to move the piston up / down- Hand pump for precision workThe 100 ton hydraulic press is equipped with a movable cylinder (left-right) and a height-adjustable work table. Over and beyondit has a pressure regulation, 2 speeds, a joystick anda hand pump for precision pressing.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 20 ttable length: 670 mmtable width: 570 mmtotal power requirement: 8 kWweight of the machine ca.: 4 tdimensions of the machine ca.: 2 x 2 x 3 mNo. 2886Spotting press 200 kNRICE TUS 60 OK 20Stroke approx. 700Drive: 7,5 kWHydraulic controlExtendable table 670 x 570 mm,Swivel-out top plate 670 x 570 mm,Installation height 740 mmClearance between the columns 620 mm,Space requirement L/W/H 1870 x 1620 x 3000 mm,Weight approx. 3.5 to.Asking price: 8.500,-- ex works / EXWAsking price: 12.900,-- EXW warehouse loaded free on suitable truckThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 60 tstroke: 380 mmtable surface area: Arbeitsbreite 750 mmpressure: 259 baroil volume: 38 dm³ajustment speed: 2,87 mm/secwork speed: 9,5 mm/secreturn speed: 12 mm/sectotal power requirement: 2,2 kWweight of the machine ca.: 540 kgInner diameter of the cylinder [mm]: 170Piston rod diameter [mm]: 75Diameter piston crown [mm]: 100- Integrated pressure gauge- Pressure regulator- Hydraulic unit with 2 speeds- Working table adjustable in height- Joystick to move the piston up / downThe 60 ton workshop press has a fixed cylinder and aheight-adjustable work table (motorized). Equipped withPressure regulation, manometer, 2 speeds and a joystick for themove the piston up and down. With this joystick you can use the piston preciselymove, making this hydraulic press perfect for precision jobssuitable.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pression : 20 tDistance entre les colonnes : 220 mmcourse : 50 mmpuissance totale requise : 0 kWpoids de la machine env. : 0,17 tdimensions de la machine env. : 0,4 x 0,5 x 1 m
pression : 60 tDistance entre les colonnes : 550 mmCourse : 150 mmPuissance totale requise : 11 kWPoids de la machine env. : 5 tDimensions de la machine env. : 3 y 3 x 2,5 mRéf. 4105Pressehydraulique Force de compression max. 600 kNCourse du vérin 150 mmPoids env. 4500 kgTable 500 x 400 mm
pressure: 63 tdistance between columns: 680 mmstroke: 150 mmtotal power requirement: 15 kWweight of the machine ca.: 7 tdimensions of the machine ca.: 3 x 3 x 3 mNo. 0214ydraulic high-speed double-column press SMG DS 63Clearance between the uprights 680 mm,max. distance between table top and ram 385 mm,Ejector force 15kN, largest ram stroke 150 mm.Working area: Table surface 660 x 460Drive: 15 kW pressing force 630 kN, retraction force 51 kNThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 tstroke: 400 mmtable surface area: Arbeitsbreite 1300 mmpressure: 243 baroil volume: 64 dm³ajustment speed: 5,73 mm/secwork speed: 1,84 mm/secreturn speed: 7,08 mm/sectotal power requirement: 3,0 kWweight of the machine ca.: 1690 kgInner diameter of the cylinder [mm]: 320Piston rod diameter [mm]: 140Diameter piston crown [mm]: 175- adjustable cylinder (left-right)- Integrated pressure gauge- Pressure regulator- Two-speed hydraulic unit- Working table adjustable in height- Joystick to move the piston up / down- Hand pump for precision work- with digital displayThis 200 ton hydraulic press is equipped with a movable cylinder (left-right), a height-adjustable work table, a pressure regulator, 2speeds, a joystick and a hand pump for precision pressingfitted.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 30 tstroke: 350 mmtable surface area: Arbeitsbreite 750 x 260 mmpressure: 221 baroil volume: 37 dm³work speed: max. 9,8 mm/secreturn speed: 14 mm/sectotal power requirement: 3 kWweight of the machine ca.: 385 kgInner diameter of the cylinder [mm]: 130Piston rod diameter [mm]: 55Diameter piston head [mm]: 80- Integrated pressure gauge- Pressure regulator- Hydraulic unit with variable speeds- Working table adjustable in height- Joystick to control piston and speedThe workshop press (30T) has a fixed cylinder and a highadjustable work table (motorized). Equipped with pressure regulation,Pressure gauge, variable speed and a joystick to move the piston up and downto move off. With this joystick you can also control the speedadjust, making this motorized hydraulic press perfect forprecision work is suitable.The data for this ad was created with ModulMWS - the software solution of Lo ...
pressure: 40 ttable length: 1280 mmtable width: 900 mmtotal power requirement: 7 kWweight of the machine ca.: 8 tdimensions of the machine ca.: 3 x 2 x 3,6 m mNo. 5282Spotting press 400 kNREIS TUS 90 OK 40Working area: table 900 x 1280Column passage 930 x 705 mmTable top 900 x 1280 mmram plate 900 x 1200 mmInstallation height 1035 mmSpace requirement approx. 3 x 2 x 3.6 mTransport dimensions approx. 4 loading meters, width 2.20 / height 2.80Weight approx. 8 tonsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 6,2 tchamfer lenght: 285 mm mmdistance between columns: 230 mmdayligth: 215 mmthroat: 70 mmstroke: 100 mmworking feed: 9,8 mm/secreturn speed: 50 mm/secquantity of oil: 10 lControl: DELEM DA 41T total power requirement: 0,7 kWweight of the machine ca.: 250 kgdimensions: 900 x 1300 x 550 mm• Basic version as a C-frame• Compact table model• Ideal for prototypes and small series• Very short setup time• Functionally simple• Wide range of applications• Low noise level• Low energy consumption• Easy handlingincluding special equipment:- CNC control DELEM DA 41TThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 150 tTable dimensions: 1000 x 360 mmvoltage: 400 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mInclineable mechanical press withupdated electrics (CE2004) andbolster plates.The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 2,5 kNstroke: 45 mmthroat: 90 mmWorking height from to: 80 - 220 mmtable surface area: 120 x 60 mmweight of the machine ca.: 22 Kgdimensions: 160 x 230 x 390 mmHand presses with rack HZ 250The power is transmitted via a rack and pinion construction. she findstheir use where during the working process a constant pressureis needed.Precisely manufactured, spindle hardened and ground, unlimited service lifeLong spindle guide, optimal pressure performance,T-slot according to DIN 650 milled in the middle, sliding blocks fit exactly.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 500 kNstroke: 40 mmthroat: 73 mmWorking height from to: 60 - 150 mmtable surface area: 115 x 70 mmweight of the machine ca.: 10 Kg.Toggle lever hand press SPECIAL OFFER!• Working height adjustable by simply loosening the clamping screws on the stand• Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle• Hand lever arranged in a user-friendly manner, return via springThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: ja weight of the machine ca.: 9,5 tserial number: 10457/2 : 160000 KGstroke of worktool slide: 41 Hub/minPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 tdistance between columns: 650 mmstroke: 200 mmtotal power requirement: 30 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2500 mmplate thickness: 12,5 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mWidth of metal, max. 2,500 mmMetal thickness, max. 12.5 mmWeight, approx. 19,000 kgDrive 40 kWEquipment / Special Features:Adjustment of cutting gap.Hydraulic blank holder.Automatic arrester adjustment for cutting blanks.Program input and piece number input.Transportation device for blanks. Stacking device.This is an ideal machine for cutting lots of small blanks out of large pieces of sheet metal. Machine is equipped with a complex stacking device on the back of the machine. This is a heavy and rigid machine.Condition : Good to very good. Machine can soon be inspected under power.Delivery : Ex stock, as inspected.Payment : Net, after conclusion of contract.Thank you for your interest.The data for this ad w ...
Distance entre les colonnes : 300 mmLongueur de la table : 3550 mmLargeur de la table : 190 mmHauteur de la table : 800 mmDistance entre les colonnes : 3230 mmBras de colonne : 300 mm Poids de la machine env. : 12,5 tDimensions de la machine env. : 1600 x 3800 x 2800 m
pression : 500 tLargeur de passage : 750 mmcourse : 120 mmpuissance totale requise : 57 kWpoids de la machine env. : 16 tdimensions de la machine env. : m
pressure: 75 tthroat: 280 mmstroke: 303 mmtotal power requirement: 15 kWweight of the machine ca.: 7000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A dismantled Mecamaq hydraulic press is available. Pressing force: 100t, max. pressure: 290bar, main piston diameter: 200mm/120mm, auxiliary cylinder diameter: 40mm/25mm. Main cylinder working stroke: 500mm, max. installation height: 800mm, working height: 800mm, effective dimensions X/Y: 700mm/500mm, table dimensions X/Y: 800mm/500mm, working speed: 6mm/s, return speed: 150mm/s. Max. tool dimensions X/Y: 800mm/600mm, max. tool weight: 1000kg. Machine dimensions X/Y/Z: approx. 1000mm/1350mm/2750mm, weight: approx. 4000kg. Documentation available. On-site inspection is possible.
pressure: 8,5 kNstroke: 40 mmthroat: 95 mmWorking height from to: 95 - 240 mmtable surface area: 160 x 110 mmspindle diameter: 25 mmweight of the machine ca.: 27 Kgdimensions: 160 x 230 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 8,0 kNstroke: 40 mmthroat: 90 mmWorking height from to: 50 - 200 mmtable surface area: 120 x 160 mmweight of the machine ca.: 22 Kgdimensions: 160 x 230 x410 mmKnee lever hand press with fine height adjustment SPECIAL PRICE!• Working height adjustable by simply loosening the clamping screws on the stand• Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle• Hand lever arranged in a user-friendly manner, return via springThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
