Fabricant:
(Catégorie: 106)
: neu : ca. 12 Wochen ab Auftrags : Türkei : 10200 €: 195.84 €: 150 to: fix : 300 mm: 1070 mm: 280x200 mm: 5 mm/s: 10 mm/s: 2050 mm: 1000 mm: 2270 mm: 1870 kgsteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 300 tchamfer lenght: 4100 mmdistance between columns: 3710 mmstroke - stepless adjustable: 250 mmcolumn arm: 330 mmdayligth: 500 mmtable height: 940 mmtable width: 250 mmworking feed: 7.0 mm/secreturn speed: 90.0 mm/secControl: konv. operating pressure: max. 305 barvoltage: 380 Vtotal power requirement: 22.5 kWweight: 25200 kgrange L-W-H: 4320 x 2100 x 3370 mm well-maintained condition ()- in checked condition - machine video -https://www.youtube.com/watch?v=rPOBwTfVReoEquipment:- simple, conventional hydraulic press brake- swiveling control panel, left front- electro-motoric back stop (X axis) adjustment via front control panel (button) with analog position display fine adjustment via handwheel, front- with 3x stop fingers, manually adjustable- electro-motoric depth adjustment (Y1+Y2 axis) with analog position display- 1x split set of 85° deer foot upper tool- 1x MultiV - uni ...
pressure: 50 tchamfer lenght: 1550 mmdistance between columns: 1150 mmControl: CYBELEC DNC 1200 PS Eco column arm: 405 mmtable height: 900 mmstroke of ram: 400 mmdistance between table / ram: 720 mmtotal power requirement: 9,5 kWweight of the machine ca.: 5.200 kgdimensions of the machine ca.: 2000x1900x2920 mmAccessories/Equipment:- CYBELEC DNC 1200 PS Eco controller- 2 support arms- 4 stop fingers- Lasersafe- Foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 330 tchamfer lenght: 3100 mmdistance between columns: 2600 mmControl: Cybelec VisiTouch 24 throat: 500 mmdayligth: 500 mmstroke: 300 mm: 165 mm/sbending speed: 0 - 10 mm/stotal power requirement: 32 kWweight of the machine ca.: 18.500 kgdimensions: 3900 x 1970 x 3520 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 120 tchamfer lenght: 3050 mmdistance between columns: 2550 mmstroke of upper beam: 155 mmthroat: 350 mmajustment speed: 100 mm/secworking feed: 9.0 mm/secreturn speed: 77.0 mm/secControl: P 40 work height max.: 878 mmtable width: 104 mmoil volume: 150 ltotal power requirement: 11.0 kWweight: 7550 kgrange L-W-H: 3550 x 2150 x 2600 mm- in checked conditions - machinevideo - https://www.youtube.com/watch?v=bUaEa_nHZ6EEquipment:- NC electro-hydraulic press brakes- with NEW ELGO NC control unit P40 New price approx. 4.000 Euro Control / movement of the backgauge - X axis (target/actual input) Control / movement of the depth setting - Y axes (target/actual input) Inching mode for X axis Y axes also possible- Swivel operation, front left- NC controlled axes : Y1 Y2 X- NC electro-motorized backgauge (X axis) with 2x manually adjustable stop fingers including lateral and height adjustme ...
pressure: 100 tstroke: 380 mmtable surface area: Arbeitsbreite 1100 mmpressure: 258 baroil volume: 46 dm³ajustment speed: 7,54 mm/secwork speed: 2,47 mm/secreturn speed: 9,06 mm/sectotal power requirement: 2,2 kWweight of the machine ca.: 970 kgInner diameter of the cylinder [mm]: 220Piston rod diameter [mm]: 90Diameter piston crown [mm]: 120- Movable cylinder (left-right)- Integrated pressure gauge- Pressure regulator- Two-speed hydraulic unit- Working table adjustable in height- Joystick to move the piston up / down- Hand pump for precision workThe 100 ton hydraulic press is equipped with a movable cylinder (left-right) and a height-adjustable work table. Over and beyondit has a pressure regulation, 2 speeds, a joystick anda hand pump for precision pressing.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 tstroke: 400 mm: 1010 mm: 295 mmHeads: 175x115 mmfeed down: 7,6 mm/secfeed up: 13,4 mm/sectotal power requirement: 4,0 kWweight of the machine ca.: 1000 kgdimensions of the machine ca.: 1600x850x2450 mmDomestic equipments:- Stable welded construction- Pressure cylinder laterally adjustable- Electric control via selector lever / manually via hand lever- Pressure gauge via pressure gauge- Material requirements - CE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 75000 €: 1417.5 €: 150 to: 500 mm: 2.500 x 2.050 mm: 800 mm: 20 mm/s: 3 mm/s: 2900 mm: 2500 mm: 2500 mm: 5200 kg: horizontal verschiebbar : 2050 mm: 1400 mm: 1600 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 91200 €: 1723.68 €: 100 to: 500 mm: 600 x 900 mm: 700 x 1100 mm: 750 mm: 320 mm: 100 mm/s: 8,5 mm/s: 165 mm/s: 11 kW: 2100 mm: 1900 mm: 3350 mm: 7300 kg: 240 bar: 30 to: 200 mm: 120 mm: 170 bar: 52 mm/sec.: 700 x 400 mm2-hand controlControl over SPSAdjustable die cushion strokeLubricant-free ram guidelight barriersUser Manual in Germanaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 57920 €: 1094.69 €: 60 to: 2050 mm: 3 (Y1, Y2, X) : 265 mm: 1700 mm: 450 mm: 530 mm: hydraulisch : 200 mm/s: 10 mm/s: 110 mm/s: 650 mm: 500 mm/s: 350 mm/s: 250 mm: 900 mm: 104 mm: 100 l: 7.5 kW: 3200 mm: 1550 mm: 2850 mm: 5600 kg: 650 mm3 axes (Y1, Y2,X )CNC control DT-15- 2D grafic display 15",- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of the bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBservo motorized back gauge on linear guides and ball screwsback gauge finger blocks on double linear guidesCNC crowning tableupper ...
pressure: 20 tstroke: 150 mmdayligth: 700 mm: 500 mm: 195 mmweight of the machine ca.: 200 kgOverall size: 670x870x1900 mmDomestic equipments:- Stable welded construction- manually via hand lever- Pressure gauge via pressure gauge- CE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
stroke: 175 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4-6 Monate ab Auftrag : Türkei : 231900 €: 400 to: 6050 mm: Y1 / Y2 / X und R Achse : 365 mm: 5100 mm: 510 mm: 630 mm: hydraulisch : 150 mm/s: 9 mm/s: 150 mm/s: 750 mm: 160 l: 7500 mm: 2110 mm: 3810 mm: 34600 kg1 SERVO MOTOR AND PUMP PER CYLINDER4 axes (Y1, Y2,X andR)CNC control SKY 22- intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD- with 2D and 3D working screen- direct programming of the bending angle- user friendly programming in dialogue form optionally in 2D or 3D mode- 2D and 3D simulation of the bending sequence- automatic tool selection in 3D mode- automatic calculation of the blank sheet size- bending order calculation- graphic product and tool memory- correction possibility- USB and Ethernet interfaces for import, backup and programm transportation- OS: Windows- IGES, STEP, DXF files importservo motorized b ...
: neu : 2023 : 7295 : ca. 12 Wochen ab Auftrags : Türkei : 22750 €: 436.8 €: 150 to: 1520 mm: 300 mm: hydraulisch : 11 kW: 2630 mm: 1000 mm: 2450 mm: 3270 kg: 610 mm: 1520 mm: 5 mm/s: 9 mm/s: 10 mm: 100 mm: 190 mm2 guidingsbig upper tool holder and table witht-slotsupper and lower pressbrake toolmanometerrapid down move with automtic changeto working speedpiston stops in every position2 hand panel and foot pedalheight adjustable tableuser manual in Germanand Englishaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 159300 €: 3010.77 €: 320 to: 4050 mm: Y1 / Y2 / X und R Achse : 365 mm: 3600 mm: 410 mm: 630 mm: hydraulisch : 160 mm/s: 10 mm/s: 160 mm/s: 650 mm: 500 mm/s: 250 mm: 900 mm: 154 mm: 5300 mm: 1910 mm: 3230 mm: 20100 kg1 SERVO MOTOR AND PUMP PER CYLINDER4 axes (Y1, Y2,X andR)CNC control SKY 22- intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD- with 2D and 3D working screen- direct programming of the bending angle- user friendly programming in dialogue form optionally in 2D or 3D mode- 2D and 3D simulation of the bending sequence- automatic tool selection in 3D mode- automatic calculation of the blank sheet size- bending order calculation- graphic product and tool memory- correction possibility- USB and Ethernet interfaces for import, backup and programm transportation- OS: Windows- IGES ...
pressure: 30 tstroke: 170 mmdistance spindle /table: max. 700 mmFront light range: 600 mmLateral light range: 195 mmweight of the machine ca.: 200 kgdimensions: 670 x 970 x 1900 mmDomestic equipments:- Stable welded construction- manually via hand lever- Pressure gauge via pressure gauge- CE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 100920 €: 1907.39 €: 220 to: 4050 mm: Y1 / Y2 / X Achse : 265 mm: 3600 mm: 450 mm: 530 mm: hydraulisch : 160 mm/s: 10 mm/s: 140 mm/s: 500 mm/s: 350 mm/s: 250 mm: 900 mm: 104 mm: 250 l: 22 kW: 5250 mm: 1770 mm: 3000 mm: 14750 kgStandard accessories:3 axes (Y1, Y2,X)CNC control DT-15- 2D grafic display 15",- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of the bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBservo motorized back gauge on linear guides and ball screwsback gauge finger blocks on double linear guidesCNC crowning t ...
pressure: 3000 tchamfer lenght: 14000 mmdistance between columns: 10500 mmControl: CYBELECCNC 7000 m. Grafik table width: 1000 mmstroke: 1300 mmmin./max.distance between table and ram: 1800 mmcontrolled axis: Y1, Y2, X1, X2 total power requirement: kWweight of the machine ca.: mind. 465 tdimensions of the machine ca.: 14600 x 4200 x 7200 mm- throat depth: 700 mm- controlled axes: Y1, Y2, X1, X2- Dimensions (length x width x height):- Foundation depth for table: 3400 mm- Foundation depth for stand: 1700 mm- Dimensions of the individual components for transportation:- Table: 14020 x 4270 x 910 mm, weight approx. 125 tons- Top section: 15240 x 4060 x 910 mm, weight approx. 120 tons- 2 side stands: 7620 x 3550 x 1530 mm, weight approx. 90 tons each- Lower tool: 15240 x 1220 x 1220 mm, weight approx. 40 tons- 2 pcs. Container 40” for cylinder, electrics and various attachments- Control sys ...
pressure: 1.000 tnominal power: 10.000 kNstroke length max.: 1.650 mmworking feed: 62 mm/secweight of tools max.: 40.000 kgvoltage: 400 Vtotal power requirement: 420 kWweight of the machine ca.: 254 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 180 tchamfer lenght: 3100 mmdistance between columns: 3600 mmControl: Cybelec CybTouch 15 stroke: 250 mmdayligth: 470 mm: 180 mm/sbending speed: 0-10 mm/s: 165 mm/stotal power requirement: 15 kWweight of the machine ca.: 12.500 kgdimensions: 4000 x 2000 x 3030 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 171300 €: 3237.57 €: 400 to: 4050 mm: Y1 / Y2 / X Achse : 365 mm: 3400 mm: 510 mm: 630 mm: hydraulisch : 160 mm/s: 10 mm/s: 140 mm/s: 500 mm/s: 350 mm/s: 250 mm: 1050 mm: 154 mm: 250 l: 37 kW: 5750 mm: 2110 mm: 3640 mm: 27760 kg3 axes (Y1, Y2,X)CNC control DT-15- 2D grafic display 15",- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of the bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBservo motorized back gauge on linear guides and ball screwsback gauge finger blocks on double linear guidesCNC crowning tableupper tool 1010 ...
pressure: 125 tchamfer lenght: 3000 mmdistance between columns: 3100 mmControl: Delem DA 66S stroke: 300 mmdayligth: 500 mm: 200 mm/sbending speed: 0-12 mm/stotal power requirement: 15 kWweight of the machine ca.: 10.000 kgdimensions: 4200x2200x2900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 19500 €: 374.4 €: 70 to: fix : 500 mm: 700 mm: 900 mm: 20 mm/s: 2 mm/s: 1700 mm: 1000 mm: 2400 mm: 980 kg2 speedscontrol by handwheel and push button (2-hand)adjustable max. pressuremanometeraccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 110 tchamfer lenght: 2550 mmControl: Cybelec DNC 70 weight: 9000 kgdimensions: 3000 x 2100 x 3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 250 tchamfer lenght: 3550 mmdistance between columns: 3000 mmControl: Cybelelc DNC 1200 total power requirement: kWweight of the machine ca.: 18.500 kgdimensions of the machine ca.: 4300x2750x3750 mmAccessories:- 2-hand foot switch- Lasersafe Fisseler- Hydraulic tool clamping at top and bottom- Die shift- Hydraulic crowning- Support arms- Cybelec DNC 1200 control- 1 set of upper and lower tools- Controlled axes y1, y2, x, r, z1, z2, inclined stop- Protective grilleThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 tchamfer lenght: 3050 mmdistance between columns: 2550 mmtable width: 220 mmcolumn arm: 280 mmdayligth: 440 mmwork stroke: max. 250 mmtotal power requirement: 22 kWweight of the machine ca.: 13 tPress force: 160 tBending length: 3,050 mmDistance between columns: 2,550 mmTable width: 220 mmThroat depth: 280 mmInstallation height (daylight): 440 mmMax. stroke: 250 mmTotal power requirement: 22 kWMachine weight: approx. 13 tAdditional InformationStroke speed:Downward (rapid approach): 90 mm/sPressing speed: 11 mm/sReturn speed (upward): 90 mm/sOperation: Two-hand control and foot pedalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 120 tstroke: 400 mmdayligth: 900 mm: 1220 mm: 400 mmfeed down: 5,8 mm/secfeed up: 9,5 mm/secHeads: 200x125 mmtotal power requirement: 6 kWweight of the machine ca.: 1250 kgdimensions of the machine ca.: 1900x1000x2550 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 tthroat: - mmstroke: 8 - 116 mmtotal power requirement: 8 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: ca. 2,5 x 2,5 x 3,5 mNo. 0778Single-column eccentric press 1000 kNStroke adjustment 8-116 mm, stroke rate 65/min,ram adjustment 80mm,Space requirement2.1x 1.7 x 3.1 m,Weight approx. 7500 kgStand tiltable, 10°/20°/30°Working area: table 800 x 560Drive: 8 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 28.0 tthroat: 225 mmstroke: 150 mmtable surface area: 325 x 300 mmwork speed: 2.0 - 9.8 mm/sekreturn speed: 12.8 mm/sektotal power requirement: 4.0 kWweight of the machine ca.: 650 kgdimensions of the machine ca.: 1800 x 900 x 2000 mm- NC control to adjust the piston stroke- Selector switch for manual or semi-automatic operation- Flow control valve and pressure control valve- Integrated pressure gauge- Various tools can be installed on the piston - inside There is a 40 mm hole for attaching the toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 6 tdistance between columns: - mmstroke: - mmtotal power requirement: - kWweight of the machine ca.: 1 tdimensions of the machine ca.: 1 x 1 x 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
