presses machines d'occasion à vendre (1,577)

La modernisation du système électrique a eu lieu en 2020. Dimensions de la table de presse : 530 × 640 mm environ. Dégagement entre les étagères : environ 220 mm Dimensions de la machine : 4200 x 2200 x 3500 mm environ. Dimensions du panneau : environ 1400 × 500 × 2400 mm Capacité : 25 tonnes Puissance : 40 kW Coups par minute : entre 775 et 1425 Avertissement : les informations rapportées ont été prises à bord de la machine et peuvent ne pas correspondre à la performance réelle. Pour plus d’informations, une inspection sur site est recommandée. L’article est vendu dans l’État où il se trouve, non vérifié et sans garantie de fonctionnement. Article non soumis à des restrictions de vente. Auction-ID: A7-44316-724

Données techniques Fabricant : Berg & Schmid Pressentechnik Modèle : HK 800 Type de machine : Presse à levier manuel Capacité de pression : 8,0 kN Type : Presse mécanique à bascule Assemblage : Dispositif de table Configuration Accessoires : Réglage de la fréquence de coup Accessoires : Jeu de lettres à traits Accessoires : Supports à cône (tailles multiples) Accessoires : Table de travail, dimensions (LxLxH) environ 1000x600x1050 mm Accessoires : Divers inserts et pièces de pression Auction-ID: A1-43813-2065

Contrôle Cybelec DNC 70 (Suisse) Comprend la documentation et les manuels Auction-ID: A1-41985-8

Auction-ID: A1-43755-14

Presse à portique manuelle 20 tonnes Dimensions totales : 1200 x 800 x 500 mm Poids : 100 kg Auction-ID: A7-43971-176

Détection lumineuse CW et contrôle HMI Siemens Simatic. Collecte uniquement sur rendez-vous. Cet article est vendu hors fondation et, par conséquent, toutes les dispositions logistiques, y compris le démontage, l’emballage, le chargement des marchandises, le transport, la douane et la livraison à destination finale, relèvent de la responsabilité de l’acheteur. Auction-ID: A7-43771-1

Capacité 4 tonnes, manuel, jamais utilisée Dimensions totales : 500 x 400 x 800 mm Poids : 50 kg Auction-ID: A7-43971-249

Pour participer à la vente aux enchères, il est nécessaire de verser 10 % du prix de départ en dépôt. Demandez à la personne de contact par email de matteo.tosin@surplex.com les coordonnées bancaires du transfert. Attention : Le contenu de la machine est exclu Auction-ID: A7-43767-10

Pression : 160 Tstroke : 810 mm, Gorge : 360 mm-Taille de la table : 900 x 630 mmDimension de la RAM : 750 x 450 mmdayLumière : 800 mm Diamètre des pistons : 400/360 mmRam. Course : 200 mm/sec Puissance totale requise : 17 kW-poids de la machine environ : 7 tLes données pour cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

Force nominale : 400 tonnes Maximum. Découpe : 2400 x 2000 mm Passe maximale de la matrice par tonne : 25 Vitesse minimale (mm/s) : 3,5 Vitesse maximale (mm/s) : 14 Pression maximale (bar) : 300 Auction-ID: A7-44061-50

Inclut des supports de perforation Supra, y compris les tétons et les matrices Machine qui fuit de l’huile Auction-ID: A1-41985-40

Auction-ID: A1-43456-7

: gebraucht : 2024 : 7319 : prompt, Zwischenverkauf v : Türkei : 6900 €: 1 : 120 to: horizontal verschiebbar : 400 mm: 900 mm: 1200 mm: 5,8 mm/s: 9.5 mm/s: 1200 x 400 mm: 4 kW: 1900 mm: 1000 mm: 2450 mm: 1250 kgwith horizontally sliding cylindermotorhydraulic with additional hand pumpHeight adjustable tableOil Pressure manometerOPTION:1 pair of V-block € 540,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 7306 : prompt, Zwischenverkauf v : Italien : 11800 €: 205.44 €: 1 : 10700 €: 50 to: horizontal verschiebbar : 350 mm: 900 mm: 900 mm: max. 9 mm/s: 0,75 kW: 1700 mm: 700 mm: 2100 mm: 720 kg: 550 mmThe hydraulic movement of the piston is controlled by a handwheel,which enables very sensitive and precise positioning.One-handed operation is possible thanks to the working speed of less than 10 mm/s.Very suitable for straightening and pressing work.The cylinder can be moved sideway by handwheel (only ",M", versions)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 120/15 tdistance between columns: 860 mmstroke: 170 mmtable-size: 860 x 600 mmdayligth: 350 mmmax. distance table - ram: 520 mmram head dimension: 860 x 600 mmhole in the table: 200 x 140 mmtable height over floor: 850 mmtotal power requirement: 25 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: 2,3 x 1,7 x 3,4 mMaximum ram pressure: 120 kNMaximum pull-out pressure: 15 kNSick light curtainSafety distance: 180 mmMaximum overrun: 15 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 tchamfer lenght: 4000 mmdistance between columns: 3550 mmControl: Delem weight of the machine ca.: 20.000 kgdimensions of the machine ca.: 5000x2000x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 040 tchamfer lenght: 1600 mmdistance between columns: 1100 mmstroke of upper beam: 100 mmthroat: 195 mmworking feed: 10.0 mm/secreturn speed: 70.0 mm/sec: 180 barwork height max.: 840 mmtable width: 110 mmdayligth: 295 mmControl: ATL 550 total power requirement: 5.5 kWweight: 2500 kgrange L-W-H: 2100 x 1200 x 1800 mmEquipment:- NC-controlled hydraulic press brake, with torsion shaft- with ATLANTIC NC control - model ATL 550 Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1 Y2 axis) Possibility of programming different programs Memory capacity max. 200 programs - max. 400 blocks Swivel control panel, left front- Electro-motorized backgauge (X axis) with 2x stop fingers, manually adjustable (R Z axis)- Tool holder system A - with top wedge crowning- Split insert/bending tools- Lateral safety guards- rear safety guard- 1x freely movable double foot swit ...

pressure: 035 tchamfer lenght: 1250 mmdistance between columns: 1070 mmpiston stroke: 150 + 60 mmcolumn arm: 410 mmtable height: 800 mmdayligth: 470 mmworking feed: 10.0 mm/secreturn speed: 70.0 mm/sectable width: 140 mmControl: ELGO NC Number of working hours: ~ 9.600 hoil volume: 80.0 loperating pressure: max. 240 barvoltage: 380 Vtotal power requirement: 4.0 kWweight: 2200 kgrange L-W-H: 1800 x 1450 x 2150 mm Well maintained condition With only approx. 9.600 operating hours ()Features:- Robust NC-controlled hydraulic press brake- With ELGO NC control unit P8822” Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1+Y2 axis) Swiveling control panel, front left- NC electric motorized backgauge (X axis) With 2x stop fingers, manually adjustable (R+Z axis)- 1x split set of pointed tools - top- 1x rotatable Multi-V die block- Side safety device (swivel doors)+ FIE ...

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 6500 €: 125.45 €: 70 to: fix : 900 mm: 900 mm: 1700 mm: 700 mm: 2100 (PSS: 2300) mmThe table can be lifted with a chainHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 70 TL: 1 speed 4 mm/s, single-hand control with lever € 6.500,00 PSS 70 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 7.200,00 PSS 70 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 7.900,00 PSS 70: same as PSS 70 NC but with stroke 500 mm € 8.700,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 66700 €: 1260.63 €: 150 to: 500 mm: 1.550 x 2.000 mm: 800 mm: 20 mm/s: 3 mm/s: 2350 mm: 2000 mm: 2500 mm: 4100 kg: horizontal verschiebbar : 1550 mm: 1000 mm: 1300 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2023 : 7280 : prompt, Zwischenverkauf v : Türkei : 15700 €: 1 : 100 to: fix : 1020 mm: 300 mm: 1020 mm: 680 mm: 9 mm/s: 5 mm/s: 10 mm/s: 6 mm: 500x1020 mm: 100 mm: 190 mm: 2110 mm: 1000 mm: 2275 mm: 2082 kgdemo machine / mint conditionnet price (price for new machine € 19.550,00)2 guidingsbig upper tool holder and table with t-slotsupper and lower pressbrake toolmanometerrapid down move with automtic change to working speedpiston stops in every position2 hand panel AND FOOT PEDALTisch höhenverstellbaraccording to CE regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 6500 €: 125.45 €: 60 to: fix : 250 mm: 1040 mm: 180x120 mm: 4 mm/s: 10 mm/s: 1710 mm: 700 mm: 2100 mm: 800 kgsteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISH user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 102300 €: 1933.47 €: 80 to: 2550 mm: 4 : 320 mm: 2840 mm: 500 mm: servomotorischer Riemenan : 105 mm/s: 10 mm/s: 105 mm/s: 650 mm: 250 mm: 3700 mm: 2200 mm: 2550 mm: 6400 kgElectromotor drive with multiple switched flat belt system4 axes (Y1, Y2,X, R)CNC control DELEM DA-66S- 2D touchscreen display 17- 3D visualisation in simulation and production- intuitive touch-screen control (simple drawing of the bending outline with your finger)- simple and convenient data transfer- multi-simulation option- user friendly programming in dialogue form- graphic simulation of the bending sequenceservo motorized back gauge on linear guides and ball screwsback gauge finger blocks on double linear guidesupper tool 1010 / A / 75 °, devidedand cranked4-V die block 60x60 2009 (V = 16,22,35 and 50 mm)safety device BLVT light guardlinear guided sheet support a ...

: neu : 2024 : 7305 : prompt, Zwischenverkauf v : Italien : 46400 €: 886.24 €: 1 : 100 to: 500 mm: 700 x 350 mm: 800 x 600 mm: 500 mm: 300 mm: 25 mm/s: 4 mm/s: 4 kW: 1900 mm: 1200 mm: 2600 mm: 2100 kg2-fold round guidancetable and ram with T-slots2 hand operationSiemens PLCmanometerusers manualincl. pressure switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pression : 10 Ttable Surface : 1,800 x 205 mmram Course : 150 mmram Hauteur de tête : 50 mm Gorge : 150 mm Quantité d’huile : 75 l Poids de la machine environ : - charge tconnectée : 380 V / 50 Hz Dimensions de la machine : 2,0 x 1,0 x 2,10 m Redressage EITEL - RP 10Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

Pression : 100 t, distance entre les colonnes : 400 mm, course : 20 - 140 mm, surface de table : 900 x 710 mmram, surface : 560 x 450 mmram, réglage : 80 mmday. Lumière : 470 mmNo. Nombre de courses : 70 Moyeu/min Puissance totale requise : 10,5 kWweight de la machine environ : 9 dimensions de la machine L x Flu x H : 1,98 x 1,60 x 3,10 m Les données de cette publicité ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 30900 €: 590.19 €: 200 to: horizontal verschiebbar : 300 mm: 1900 mm: 320x210 mm: 5 mm/s: 20 mm/s: 2460 mm: 1600 mm: 2700 mm: 4800 kghorizontal movable cylinder by handwheelsteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISH(sample photo shows mod. HDK 1570/150)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 7700 €: 148.61 €: 100 to: fix : 900 mm: 1050 mm: 1900 mm: 850 mm: 2250 (PSS: 2400) mmThe table can be lifted with a chainHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 100 TL: 1 speed 4 mm/s, single-hand control with lever € 7.700,00 PSS 100 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 8.400,00 PSS100 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 9.000,00 PSS 100: same as PSS 100 NC but with stroke 500 mm € 10.500,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 7300 €: 140.89 €: 70 to: horizontal verschiebbar : 900 mm: 900 mm: 1700 mm: 700 mm: 2100 (PSS: 2300) mmThe table can be lifted with a chainHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 70 M TL: 1 speed 4 mm/s, single-hand control with lever € 7.300,00 PSS 70 M L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 8.000,00 PSS 70 M NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 8.700,00 PSS 70 M: same as PSS 70 M NC but with stroke 500 mm € 9.500,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 8600 €: 165.98 €: 100 to: horizontal verschiebbar : 900 mm: 1050 mm: 1900 mm: 1000 mm: 2250 (PSS: 2400) mmThe table can be lifted with a chainHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 100 M TL: 1 speed 4 mm/s, single-hand control with lever € 8.600,00 PSS 100 M L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 9.300,00 PSS 100 M NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 9.900,00 PSS 100 M: same as PSS 70 M NC but with stroke 500 mm € 11.400,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.