Fabricant:
(Catégorie: 106)
Presse plieuse avec presse à cellules robotisées Stäubli Fabricant : LA G Modèle : GBS R 1250 50 La machine n’a été utilisée que pendant une très courte période.
pressure: 1000 tdistance between columns: 5000 mmstroke: 500 mmHeight of centres: 400 mmMotor output: kWreus: U/minOverall size: 6000 x 2500 mmWeight: 1000 kgDistance between centres: 3500 mmtotal power requirement: kWweight of the machine ca.: 220 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width: 2500mm, max. sheet thickness aluminium/steel/stainless steel: 3mm/2mm/1.25mm, feeding length range: 575mm-2500mm, feeding width range: 210mm-1500mm, max. bending height: 200mm, max. negative bend: 35mm, max. diagonal twist: 3300mm, rotary table position: 0°/90°/180°/270°, working height: 1150mm. Clamping stroke: 210mm, clamping force: 240kN, clamping lowering and return speed: 50mm/s, upper beam swivel range: 135°, upper beam swivel speed: 90°/s, lower beam swivel range: 135°, lower beam swivel speed: 90°/s. Machine dimensions X/Y/Z: approx. 4050mm/1600mm/2400mm, weight: approx. 13000kg. Documentation available. An on-site inspection is possible.
PRESS DESIGN système d'entraînement : hydraulique châssis conception : cadre en C, unilatéral FORCES DE PRESSION Force totale (nominale) : 12 toCOURSE SLIDE : 200 mmCARACTÉRISTIQUES ÉLECTRIQUES tension secteur : 380 V fréquence secteur : 50 HzDIMENSIONS / POIDS Poids total env. : 1000 kgCompteur horaire : 30'181 hlast contrôle de sécurité : 27.07.2023, temps de course 38 ms, distance de course 60 mm
CONTROLS PLC SIEMENS S7 PRESS DESIGN drive system: knuckle-joint frame design: H-frame, monoblock openings in uprights: yes number of suspensions: 2 feedstock transport direction: left to right PRESS FORCES total force (nominal): 315 to nominal work capacity: 38 kNmPRESS TABLE table surface (left-right): 2000 mm table surface (front-back): 1200 mm thickness of bolster plate: 200 mmSLIDE slide force: 315 to table surface (left-right): 1995 mm table surface (front-back): 1100 mm stroke: 160 mm stroke rate (max.): 80 /minSLIDE (MECHAN. PRESS) slide adjustment: 140 mm stroke rate (min.): 20 /min stroke rate (max.): 80 /min main drive power: 90 kWTOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 555 mm distance between columns (H-frame): 2060 mm passline opening (free passage in side columns): 1060 ...
pressure: 100 tthroat: 355 mmstroke: mmtotal power requirement: 11,5 kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 60 tthroat: 280 mmstroke: 10-140 mmno. of strokes: 110 Hub/minram - range of adjustment: 60 mmtable surface area: 740x560 mmram surface: 380x195 mmhole in the table: 300x200 mmtable height: 760 mmtool hole in ram: Ø 40 mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 35 tthroat: 220 mmstroke: 8-96 mmno. of strokes: 120 Hub/minram - range of adjustment: 50 mmtable surface area: 580x440 mmram surface: 305x170 mmhole in the table: 215x175 mmtable height: 870 mmtool hole in ram: Ø 40 mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 45 tthroat: 230 mmstroke: 4-80 mmno. of strokes: 120 Hub/minram - range of adjustment: 55 mmtable surface area: 695x455 mmram surface: 365x180 mmhole in the table: 220x180 mmtable height: 890 mmtool hole in ram: Ø 40 mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 tthroat: 300 mmstroke: 10-140 mmno. of strokes: 60 Hub/minram - range of adjustment: 60 mmtable surface area: 800x500 mmram surface: 430x230 mmhole in the table: Ø150 mmtable height: 860 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 5,2 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pression : 25 Gorge : 200 mmCourse : mmPression : 25 Tno. Nombre de courses : 140 Moyeu/minfenêtre dans le cadre : 240 mmRéglage de la course : 8...80 mmRAM - Plage de réglage : 50 mmSurface du vérin : 355 x 220 mmTaille de la table : 560 x 400 mmTrou dans la table : 160 mmPuissance totale requise : 3 kWPoids de la machine env. : 2,23 tDimensions de la machine env. : m- distance glissière de la table : 250 mmLes données de cette annonce ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
Une presse plieuse hydraulique Hämmerle est disponible. Force de pression : 2000kN, longueur de travail : 2600mm, hauteur d’installation : 830mm, course : 265mm, profondeur de gorge : 300mm, déplacement rapide : 100mm/s. Dimensions de la machine X/Y/Z : env. 3750mm/2600mm/3600mm, poids : env. 16000kg. La machine n’est pas fonctionnelle. Documentation disponible. Une inspection sur place est possible.
Presse à 4 colonnes Tox MAg 008288A001 BJ 2016
pression : 200 Longueur du chanfrein : 3050 mmDistance entre les colonnes : 2550 mmCourse du vérin : 274 mmContrôle : Cybelec ModEva Pac Puissance totale requise : kWPoids de la machine env. : 17.000 kgdimensions de la machine env. : mLes données de cette annonce ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
pressure: 62 tdistance between columns: . mmstroke: 360 mmTable area: 2500x580 mmdayligth: 400 mmdiameter - coniflex cutter: Zilinderdurchmesser 200 mm0: 200 barStud passage: 590 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mVideo: https://www.youtube.com/watch?v=gkuLoo7ABkcThe tech. Data aremanufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ...
pressure: 120 tchamfer lenght: . mmdistance between columns: 2550 mmstroke: 200 mmtotal power requirement: 13,2 kVANumber of working hours: 2500 htotal power requirement: kWweight of the machine ca.: 8,3 tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacité de pression max. : 80 tCourse : 500 mm Surface de la table : 960 x 810 mm Pas de la broche : 72 Lumière du jour entre les colonnes : 950 / 540 mmPassage : 640 mm Poids de la machine ab. : 4500 kgDimensions de la machine env. : 2,0 x 2,0 x 3,85 mRéglage rapide hydraulique 500mmVolant d’inertie 2000mm4 bases de prisme pour redresser les vaguesDifférents cadres de supportLes données de cette annonce ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
Offre 25200 Spécifications: - Capacité de pression 200 t - Largeur de travail 3100 mm - Passage entre les montants 2600 mm - Largeur de la table 180 mm - Projection 300 mm - Hauteur d’installation 450 mm - Vitesse d’avance 80 mm/sec. - Vitesse de travail 9 mm/sec. - Vitesse de rétraction 60 mm/sec. - Course du vérin 120 mm - Plage de réglage des butées fixes 120 mm - Entraînement 400 V / 18,7 kW - Encombrement approximatif L 3300 x H 2950 x P 1900 mm - Poids env. 10500 kg - avec : - Réglage de la profondeur de sertissage + pression de pressage -Mot. Butée arrière avec réglage fin du volant - Matrice universelle 4 fois - outil d’affûtage - Panneau de commande à deux mains, pédale de commande,
Offre 25227 Spécifications: - Capacité de pression 150 t - Largeur de travail 3600 mm - Passage entre les montants 3150 mm - Largeur de la table 180 mm - Projection 250 mm - Hauteur d’installation 325 mm - Vitesse d’avance 70 mm/sec. - Vitesse de travail 7 mm/sec. - Vitesse de rétraction 60 mm/sec. - Course du vérin 120 mm - Plage de réglage des butées fixes 120 mm - Puissance du moteur env. 7,5 kW - Remplissage d’huile env. 300 l - Encombrement approximatif L 3850 x H 2300 x P 1600 mm - Poids env. 8700 kg - avec : - Bras pivotant – panneau de commande avec commande ATL 550 - Pour la profondeur de sertissage + butée arrière -Mot. Butée arrière - Dispositif de couronnement - Lasersafe FIESSLER - Matrice universelle 4 fois, outil d’affûtage fendu + outil de pied de cerf - Panneau de ...
Pression de poinçonnage : env. 3,2 Pression d’air : 8 bar Course : max. 20 mmDistance entre les colonnes : env. 250 x 200 mmPoids de la machine env. : 52 kgincl. divers outils, voir photosLes données de cette annonce ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
Pressure power: 6-8 barAir consumption: 8 l/Hubheight of stroke: 12 mm: 134 mmno. of strokes: 400 Hub/minpunching force max.: 3500 kpweight of the machine ca.: 80 kgSchüco pneumatic press for Schüco punching toolsArt. No. Schüco: 290 124manual includedvarious pressing tools included!tool nr. 283073, 280162,299259,283492, 283072, 282867, 282644, 282663, 282868, 283071, 2830722 quick-release levers for secure and quick fastening of the press toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 500 tdistance between columns: 1220 mmmax. ram stroke: 600 mmdistance table/ram, max. stroke up, adjustment up: 1000 mmtable surface area: 1600 x 1200 mmdie-cushion pressure inside the table: 320 tstroke of drawing cushion in table: 150 mmdrawing cushion surface in table: 750 x 812 mmdie-cushion pressure in pusher: 180 tstroke of drawing cushion in pusher: 100 mmdrawing cushion surface in pusher: 750 x 625 mmram surface: 1600 x 1200 mmtable height over floor: 800 mmfeed down: 665 mm/secfeed up: 530 mm/secworking feed: 34 - 100 mm/secquantity of oil: 2000 lpower capacity: 180 kWweight: 40 tdimensions of the machine ca.: 3,2 x 2,4 x 7,5 mby using oil-hydraulic drive, hydraulic and electric controlUVV, die cushion in bed and slide, adjustable drawing speed, punching limit with damping plunger lock, electric cabinetOur list price is WITHOUT starting the machine,just as it isThe da ...
pressure: 40 tdistance between columns: 495 mmstroke: 150 mmdistance table/ram, max. stroke up, adjustment up: 300 mmtable surface area: 490 x 400 mmhole in the table: 50 mmtable height over floor: 950 mmcolumn travel -side: 155 mmram surface: 150 mmfeed down: 480 mm/secfeed up: 480 mm/secworking feed: 20 mm/secoil volume: 115 lpower capacity: 7,5 kWweight: 2,2 tdimensions of the machine ca.: 1,35 x 1,00 x 2,21 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 tthroat: 280 mmstroke: 8 - 112 mmno. of strokes: 30 - 120 Hub/mindistance table/ram, max. stroke up, adjustment up: 500 mmtable surface area: 840 x 580 mmhole in the table: 150 mmtable height over floor: 910 mmpassage to the back: 640 mmram surface: 560 x 300 mmram adjustment: 80 mmpower capacity: 7,5 kWtotal power requirement: kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: 1,4 x 2,3 x 3,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 25 tthroat: 200 mmstroke: 8 - 80 mmno. of strokes: 180 Hub/mindistance table/ram: 330 mmtable surface area: 550 x 400 mmhole in the table: 60 mmtable height over floor: 800 mmtable height over floor: 800 mmpassage to the back: 200 mmram surface: 355 x 220 mmram adjustment: 50 mmpower capacity: 2,5 kWtotal power requirement: kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 1,2 x 1,8 x 2,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Largeur de la feuille : 3000 mmEpaisseur de la plaque : 16 mmPré-pliage : / Poids de la machine env. : 15 tDimensions de la machine env. : mLes données de cette annonce ont été créées avec ModulMWS - la solution logicielle de LogoTech oHG.
pressure: 125 tno. of strokes: 55 Hub/minstroke: 20 - 160 mmtable-size: 970 x 660 mmmax. ram stroke: 160 mmmin. ram stroke: 20 mmthroat: 340 mmtotal power requirement: 11 kWweight of the machine ca.: tdimensions of the machine ca.: 1,5 x 3,0 x mWith motor, gear reduction, wheel protection, air friction clutch, additional brake(Make Desch) and safe control according to UVV,Mech. Overload protection in the ramTwo-hand operation, control cabinetThe price is ex stock as the press is, is, or is.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 tthroat: 280 mmstroke: 8 - 100 mmno. of strokes: 65 Hub/minram adjustment: 63 mmtable surface area: 620 x 500 mmdistance table/ram, max. stroke up, adjustment up: 415 mmhole in the table: 230 mmtable height over floor: 800 mmram surface: 310 x 255 mmpower capacity: 5,5 kWtotal power requirement: kWweight of the machine ca.: 3,95 tdimensions of the machine ca.: 1,20 x 1,80 x 2,40 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Qté 1 ligne de presse d’extrusion d’aluminium d’occasion Code Aluminium HE9 6063 Mfc. : Fabricant indien Construit : 1978 PLC hydraulique – mise à niveau effectuée en 2005 ! Force totale de la presse : 680 MT, 750 UST Pression d’extrusion : 210 bar Diamètre de la billette : 5", 121 mm Poids par pouce de billette : 0,76 kg/pouce Contenu de la livraison : Four de chauffage à bûches Cisaille à chaud Presse d’extrusion Extracteur suspendu Système de refroidissement sous le lit Lit réfrigérant à sortie de lit Convoyeur à bande Civière Machine de découpe Four à matrice Table de convoyage Convoyeur pour l’emballage final
plate width: 3200 mmplate thickness: 83 mmpre-bending: 72 mmroll diam. toproll: 700 mmroll diam. bottom roll: 650 mmside roll diameter: 550 mmdistance between columns: 3300 mmroll drive: 93,2 kWturning speeds: 2 - 4 m/mintotal power requirement: - kWweight of the machine ca.: 78 tdimensions of the machine ca.: 9 x 3,3 x 3,4 m4 –Roll Bending Machine- 4 roll Pinch bending- Pre-bending- Tilting function-- Hydraulic front bearing tilting speed: 450mm/min-- Hydraulic tilting of top roll: 250mm/min- CE2 Units availableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
