sous-catégories
(troisième niveau de catégorie)
Fabricant:
(Catégorie: 110)
liter capacity: 600 lPressure of pump: 8 / 20 barcontrol: Schütze / Contactorstotal power requirement: - kWweight of the machine ca.: 450 kgdimensions of the machine ca.: 1,2 x 1,8 x 1,6 mCoolant SystemBMF - BFU 600 /S2/20/8+- NEW, unused- universally applicable- can be controlled via contactors- incl. paper band filter- Number of pumps: 2- Pump performance: 2.6 kW, 3.5 HP, 2,880 rpm, 160 l/min 3.0 kW, 4.0 HP, 2,930 rpm, 40 l/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 800 600 mmtable load: 0,25 ttable height: - mmtotal power requirement: 3 kWweight of the machine ca.: 0,3 tdimensions of the machine ca.: 1,1 x 0,8 x 0,8 mNo. 4926NC rotary table for inclined bed machinesDECKEL 2238 002600 / passend zu FP 41 / FP 42Working area: Table Ø 800 x 600Control: Axis card for Dialogue 4Table load approx. 250 kgClamping grooves 16H7Dead weight approx. 280kgSpace requirement / transport dimensions approx. 1100 x 750 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate width: 3500 mmplate depth: 2000 mmplate height: 360 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 700 mmwidth: 700 mmheight: 630 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
liter capacity: 110 / 160 ltank: ca. 130 ltotal power requirement: 0,25 kWweight of the machine ca.: 0,13 tdimensions of the machine ca.: 1,4 x 0,45 x 0,6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bar material dia.: max. 85 mmbar length: 3000 / 3500 mmNo. 07031 used bar feeder TRAUB 3D / E85 / 3000 ZBar diameter : max. 85 mmBar length: max. 3000 mmUNPROOFED / As Spare PartThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
material width: 650 mmmaterial thickness: 0,8 - 5 mmFeed speed: 8 m/min.total power requirement: 10 kWweight of the machine ca.: 1,5 tMaterial width: 650 mmMaterial thickness: 0.8 – 5.0 mmFeed speed: 8 m/minTotal power requirement: 10 kWMachine weight: approx. 1.5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tool taper: VDI 40 DIN 69880 number: 22 StückA range of tool holders in good condition.Tool holder size: VDI 40, DIN 69880Were used on a Gildemeister CTX 500 E CNC lathe.Quantity:1 driven tool holder, angled design.18 driven tool holders, straight design.3 standard tool holders.Only sold in a package!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 4000 mmwidth: 2000 mmweight of the machine ca.: 8,5 theight: 400 mmPrice 1,000 euros per square meterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
feed pressure: ? 60 / 80 barliter capacity: ? lpower capacity: 4 kWtank: 250 lweight of the machine ca.: 0,3 tdimensions of the machine ca.: 900 1050 1100 (2100 ) mmInclusive:- Hydraulic diagram !- External valve block- Central lubricationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
volume capacity: max. 2250 m³/h: 2550 papower capacity: 2,2 kWSuction- Tube: 250 mmNumber of working hours: 1450 hpower requirement: 2,2 kWPacking: ca. 1200 x 900 x 1600 mmShipping weight: 250 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 405 mmtable tiltable and swivelling +/-: 45 Gradtable load: ? tgroove width: 12 mmflute distance: 45 Screw-on surface: 600185 weight of the machine ca.: 200 kgdimensions of the machine ca.: 10507001050 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of drawer: 11 Stk.weight: ca. 150 kgtable surface area: 1370 x 515 mmwork height max.: 1110 mmrange L-W-H: ca. 1380 x 550 x 1110 mm Manufacturers recommended price approx. 8.000 euros Tool range: 390 pieces Special price on requestEquipment:- mobile tool trolley including wooden worktop- robust and stable construction- aluminum drawer handles- 11x high-quality drawers - 9x drawers with equipment- including 390-piece tool range ()- Color = glossy green- 2x rigid castors / 2x steerable castors - including parking brake- central locking systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length in total: 3100 mmband width: 300 mmconveying height: 1000 total power requirement: 0 kWweight of the machine ca.: 0,32 tdimensions of the machine ca.: 3,1 x 0,7 x 1,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thread dia.: M5 - M24 turning speeds: 70 - 200 U/minworking area: max. 1200 Rangle adjustable from - to: 0 - 90 Gradvoltage: 230 Vengine output: 1200 Wweight: 65,0 kg- with micro spray system for constant cooling & minimalCooling lubricant consumption- Includes blow-out device to remove chips, ensuring optimal visibilityon the borehole- Includes quick-change chuck for using taps forThrough and blind holes- Swivel motor unit for thread cutting at any desired anglebetween 0° and 90°- Higher accuracy compared to manual thread cutting, thread isguaranteed right angle (90°)- high productivity, significant time savings compared to manualThreading- Quick-change chuck with integrated slip clutch prevents breakingof the tap- Includes large radius swivel arm for easy positioningtap on the workpiece- For thread cutting in steel, stainless steel, aluminum and non-ferrous metalsscope of delivery- ...
amplification -fold: 30 spindle taper ISO: 40 spindle taper:: M16 / DIN 2080 voltage: 6 VPacking: 0,430,25010 mShipping weight: 4 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 400 mmBore diameter: 125 mmweight: 70 kgDimensions (LxWxH): 580 x 580 x 230 mmUnused 4-jaw faceplate with individually adjustable jaws. Size 8 / DIN 55029 (Camlock), max. speed 800 rpm.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1000 mmplate thickness: / mmplate length: / mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 110 mmweight: ca. 130 kgUsed spindle support for a Table Type Borer, for example UNION BFK with 110 mm spindle dia.Good condition !The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
power capacity: - kWtool adaptor: KOMET PKB 200-20-112 total power requirement: - kWweight of the machine ca.: 700 kgdimensions of the machine ca.: 1,6 0,7 1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 630 mmtable load: 0 ttable height: 160 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 1200 mmwidth: 1000 mmtable height: 850 mmweight of the machine ca.: 1,2 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
surface area: 260 x 600 mmno. of flutes: 5 groove width: 12 mmtotal power requirement: 0 kWweight of the machine ca.: 0,06 tdimensions of the machine ca.: - mSwiveling angle tableWorkspace: clamping surface 260x 600Control: permissible load 200 kg / own weight 60 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 685 mmwidth: 460 mmheight: 115 mmT-slot - width: 10 mmT-slots: 3 StückPayload: 40.0 kgwidth: 315 mmlength: 340 mmtravel -x axis: 285 mmtravel -y axis: 140 mmmanual control device: 0,04 Nonius mmweight: 45.0 kgProperties:- for light milling work on table or crevice drilling machines- Ground clamping surface- Dovetail guide adjustable by means of wedge linesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
feed pressure: 70 barliter capacity: - ltank: 80 lpower capacity: 2,2 kWweight of the machine ca.: 400 tdimensions of the machine ca.: 0,83 x 0,6 x 1,6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Packing: ca. 2 1,25 2,3 mShipping weight: ca. 500 kgfloor space for switchgear cabinat: ca. 2,2 x 2,5 mswitchgear cabinet: 2 teilig/Rücken an Rücken Content div.SIEMENS+INDRAMAT assembliessee PHOTOSThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: komplett : div. Inhalt : div. Öle Hydraulik + Bett The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length in total: 3850 mmband width: 280 mmconveying height: Abwurfhöhe 1200 total power requirement: Förderer 0,15 + Pumpe 1 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 4 x 1,3 (0,4) x 1,7 mNo. 55301 used Scraper belt conveyor KNOLL KNOLL 370 K-2Insertion / feeding area approx. 370 x 2050 x 285 mmTank approx. 250 l plus belt volume (approx. 250 l)Pump approx. 228 l / 1 barThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
carrying capacity: 250 kgnumber of suction cups: 6 suction cup dia.: 215 mmVacuum lifter VH 6-250for the horizontal transport of smooth, dry and airtight panels.Robust supporting structure made of steel, painted in RAL 2000 with lowOwn weight.consisting of:- 1x galvanized longitudinal beam with a length of 2,400 mm- 3x galvanized crossbeams with a length of 1,000 mm- 6x Springy, articulating and adjustable suction cup holders- 6x suction cups Ø 215 mm, the seal can be separated in case of wearwhose metal supports can be changed inexpensively and without tools- 6x ball valves to switch off individual suction cups, thus also smaller formatscan be lifted without having to move suction cups or traverses.- 1x spiral connection cable small helix: with an extension length of 3,500 mm, designed as an extension cable withCEE plug and coupling. is routed to the lifting device next to the load cha ...
