sierras madera usadas para la venta (1,095)

Usado y sin revisar; visualización deseada Auction-ID: A1-50737-93

Sierra circular de mesa para uso profesional regular. Motor industrial para funcionamiento continuo, mesa de acero galvanizado con extensión, trolebús sobre rodamientos, tope ajustable de -45° a +45°. Estado: Nuevo, nunca usado, en su caja original. Especificaciones (enchufe optimachines.com): • Fuente de alimentación: 400 V• Potencia del motor: 2,1 kW• Diámetro de la pala: 315 mm• Altura de corte 90°: 90 mm• Altura de corte 45°: 50 mm• Ancho máximo de corte con tope: 200 mm• Longitud de la mesa: 800 mm• Ancho de la mesa: 550 mm• Diámetro del tubo de succión: 100 mm• Dimensiones (L x Eano x Alto): 1350 x 1250 x 1000 mm – peso neto 60kg Suministrado con: base con ruedas, mangos de viaje, carro deslizante con tope de inglete, extensión de mesa, valla y tope lateral paralelos, hoja de sierra de carburo de 36 dientes (tamaño: Ø 315 mm), protector de hoja  ...

Sierra de cinta para madera, plásticos y metales no ferrosos. 2 velocidades, guía de hoja de 3 rodamientos, guía paralela de aluminio, mesa inclinable de 0–45°, lámpara LED. Estado: Nuevo, nunca usado, en la caja original. Características (enchufe optimachines.com): • Alimentación: 230 V• Potencia del motor: 0,5 kW• Diámetro del volante de inercia: 316 mm• Longitud de la pala: 2240 mm• Velocidad de corte: 370/800 m/min• Ancho de mesa: 390 mm• Longitud de mesa: 480 mm• Diámetro del tubo de succión: 100 mm• Dimensiones (L x Anor x Alto): 780 x 600 x 1600 mm – peso neto 51kg Entregado con: Hoja, tope paralelo, tope angular, guía de hoja de 3 puntos arriba y abajo, luz de trabajo LED, empujador. Tamaño del cartón: 124 x 54 x 54 (cm) Auction-ID: A1-50698-9

Sierra de cinta de alta resistencia para trabajos exigentes. Bastidor antitorsión, gran mesa de hierro fundido gris inclinable de 0 a 45° por cremallera y piñón, volantes de hierro fundido con neumáticos de goma, 2 tubos de succión. Estado: Nuevo, nunca utilizado, en su carcasa original. Características (enchufe optimachines.com):• Fuente de alimentación: 400 V• Potencia del motor: 4,0 kW• Diámetro del volante de inercia: 610 mm• Longitud de la pala: 4590 mm• Velocidad de corte: 1560 m/min• Ancho de la mesa: 610 mm• Longitud de la mesa: 700 mm• Diámetro del tubo de succión: 2 x 120 mm• Dimensiones (L x Anor x Alto): 1250 x 10¹⁵ x 2150 mm – peso neto 337kg Entregado con: Tope angular de -60° a + 60°, hoja de sierra (tamaño: 4590 x 38 x 0,7 mm), empujador, tope paralelo de aluminio. Tamaño de la vaina: 103 x 72 x 226 (cm) Auction-ID: A1-50698-10

Sierra de cinta para madera, plásticos y metales no ferrosos, para modelistas y aficionados al bricolaje experimentados. Guía de hoja con 3 rodamientos arriba y abajo, mesa de hierro fundido/aluminio inclinada de 0 a 45°, lámpara LED. Estado: Nuevo, nunca usado, en su caja original. Características (enchufe optimachines.com):• Fuente de alimentación: 230 V• Potencia del motor: 0,17 kW• Diámetro del volante de inercia: 238 mm• Longitud de la pala: 1575 mm• Velocidad de corte: 635 m/min• Ancho de la mesa: 300 mm• Longitud de la mesa: 300 mm• Diámetro del tubo de succión: 53 mm• Dimensiones (L x Ior x Ar): 490 x 420 x 835 mm – peso neto 20kg Entregado con: Hoja, tope paralelo, tope angular, guía de hoja de 3 puntos arriba y abajo, luz de trabajo LED, empujador. Tamaño del cartón: 88 x 44 x 34 (cm) Auction-ID: A1-50698-8

Wheel diameter: 470 mmCutting height: 265 mmcutting width: 390/465 mmMotor output: 1,6 kWTable dimensions: 535/485 mmTable tiltable: 45 GradDimensions (L/W/H): 800/490/2000 mmmachine weight ab.: 157 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sawblade tiltable: 45 °Length of the rolling table: 2500 mmcutting width: 1250 mmMotor output: 4,0 kWCutting height: 90 mmCutting height at 45°: mmSaw blade diameter: mmSpeed: 4000 / 6000 U/min.weight of the machine ca.: 650 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-49889-225

Auction-ID: A1-49889-261

roll diameter: 400 mmthroat: 900 mmworkpiece height: 400 mmtable-size: 700 x 660 mmsaw band length: 4630 mmturning speeds: 45 - 500 m/min: mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,8 tDimensions (LxWxH): 1,95 x 0,9 x 2,25 0Band saw with- Ideal welding machine- Belt grinder- Table tiltable -15° to +45°- Pneumatic height adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sawblade tiltable: 45 °Length of the rolling table: 3.200 mmcutting width: 1.250 mmMotor output: 7,5 kWCutting height: ca. 204 mmSaw blade diameter: 550 mmSpeed: 3000 / 4000 /5000 U/min.weight of the machine ca.: 1.200 kg: Nein : Elektrisch : Elektrisch : Ja : Digital The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 300 mmcapacity 90 degrees: flat: 330 x 250 mmcapacity 90 degrees: square: 250 x 250 mmcapacity 45 degrees: round: 260 mmcapacity 45 degrees: flat: 260 x 200 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: flat: 170 x 170 mmband speed: 15 - 100 m/mindimensions of saw-band: 3650 x 27 x 0.9 mmControl: MEP CNC total power requirement: 2.2 kWweight: 1190 kgFully automatic electro-hydraulic band saw, featuring additional operating modes: semi-automatic semi-automatic dynamic manualDescription:- Robust, fully automatic electro-hydraulic band saw (INDUSTRIAL grade) MEP Direct control technology User interface with intuitive 10 touchscreen display Mechanical buttons for saw operating functions Guarantees reliable, simple, and intuitive operation Real-time monitoring of all cutting parameters Pivoting arm allows for convenient and safe operation Display and logging of al ...

Number of motors: 1 Stück0: , mmControl: , 0cutting width: 115 und 82 mmCutting height: 55 mmMotor output: 2.0 kWmachine weight ab.: 45 kgGraule KS crosscut saw for cutting (glass) beads with a rebated jointwith manual and electronic length stop Suitable for wood, PVC, aluminum-----------------------------------------------Brief manufacturers description:- Crosscut and miter saw for precise and user-friendly cutting to lengthin the strip area- Sturdy gray cast iron construction- A double ball-bearing axle acts as a pivot point belowthe material support table, facilitating material cutting. The cutis always made at the rear top.- Quick miter adjustment up to 45°- Readjustable fixed stops at 90° and 45°- Upper saw blade guard can be connected to extraction system-----------------------------------------------Technical data:Motor: 400 V / 2.0 kWSpeed: 2,800 rpmMax. cutting width: 115 mm ...

Sawblade tiltable: 0-46 °Length of the rolling table: 3200 mmcutting width: 1000 mmMotor output: 5,5 kWCutting height: 179 mmCutting height at 45°: 123 mmSaw blade diameter: 500 mmSpeed: 3/4/5000 U/min.weight of the machine ca.: 1300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Longitud de corte: 4.300 mm Control: Control de potencia Incisor: 2,2 kW Profundidad de corte: 2.200 mm Software: CADmatic 4.0 Protector de la hoja de sierra: 95 mm Pinzas: 7 piezas Hoja de sierra principal: 350 mm Hoja de sierra incisora: 180 mm Mesa de aire: 4 Velocidad de avance del carro de la sierra: 1 - 150 m/min Retorno de avance del carro de sierra: 150 m/min Caudal de alimentación del deslizador del programa: 90 (UE máx. 25) Retorno de avance de la corredera programada: 90 m/min Motor principal: 13,5 kW equipo: Dispositivo de presión de ángulo central Impresora de etiquetas integrada en las barras de impresión Mesa de máquina completamente sombría Control automático de la altura de la viga de presión Altura de corte automática Presión de contacto ajustable, haz de presión (paquete suave al tacto) Pinzas de presión de contacto ajustables (paquete suave al tacto) 5 ...

saw blade diameter: 350 x Ø 30/40 mmcutting diameter: 135 mmcutting length: 430 mmdimensions of saw-blade: 350x3,0/2,4x40 mmturning speeds: 3800 U/minDust suction hood: 100 mmtotal power requirement: 3,0 kWweight of the machine ca.: 100 kgdimensions of the machine ca.: 1300 x 800 x 1600 mm- Crosscut and miter saws for crosscuts- Miter adjustment on both sides (60° / 45°), with fixed stop- Compound cut on one side up to 45°, with fixed stop- Stable cast iron construction- Precise ball bearing guidance of the tool slide hardened and welded steel shafts- manual saw feed- Saw blade infinitely adjustable in height- socket for opt. suctionCutting data :- Cutting length at 90° = 430 mm- Cutting height at 90° = 135 mm- Cutting length at 45° = 310 mm- Cutting height at 45° = 92 mm Special accessories included:- 1x HM circular saw blade 350 x 3.0/2.4 x 40 mm Z = 108 FTZ neg. for aluminum ...

saw blade diameter: 520 x Ø 50 mmcutting diameter: 200 mmcutting length: 420 mmCutting height at 45°: 140 mmdimensions of saw-blade: 520x3,6/3,0x50 mmturning speeds: 2800 U/minDust suction hood: 100 mmtotal power requirement: 3,0 kWweight of the machine ca.: 310 kg.range L-W-H: 1400 x 900 x 1650 mm- Crosscut and miter saws for crosscuts- Miter adjustment on both sides (60°/45°), with fixed stops- Shift cut on both sides (60°/45°), with fixed stops- Stable cast iron construction- Precise ball bearing guidance of the tool slide hardened and welded steel shafts- manual saw feed- Saw blade infinitely adjustable in height- socket for opt. suctionFurnishing :- 3.0 kW motor for ALU cuttings- Saw blade can be tilted via handwheel and worm gear (shift cut)- Saw blade diameter 520 mm- Saw blade mounting hole 50 mm- Saw blade speed 2,800 rpm- 400 Volt / 3 kW (S6/40%) motor with brake and aut ...

saw blade diameter: 420 x Ø 40 mmcutting diameter: 170 mmcutting length: 410 mmdimensions of saw-blade: 420x3,2/2,4x40 mmturning speeds: 3500 U/minDust suction hood: 100 mmtotal power requirement: 3,0 kWweight of the machine ca.: 120 kgdimensions of the machine ca.: 1300 x 800 x 1600 mm- Cross-cut and miter saws for cross-cut cuts- Miter adjustment on both sides (60 ° / 45 °), with fixed stop- Shifter cut on both sides 45 °, with fixed stop- Stable cast iron construction- Precise linear bushing guide on the tool slide hardened and ground steel shafts- manual saw feed- Saw blade infinitely adjustable in height- nozzle for opt. SuctionCutting data:- Cutting length at 90 ° = 410 mm- Cutting height at 90 ° = 170 mm- Cutting length at 45 ° = 290 mm- Cutting height at 45 ° = 115 mm Special accessories included:- Adjustment of shifter cut via hand crank, both. adjustable (45 ° / 45 ° ...

cutting width: max. 310 mmCutting height: max. 125 mmSaw blade diameter: 500 mmMotor output: 5,5 kWSpeed: 2.800 U/min.Required air-pressure: 6-8 barWorking height: 900 +/- 20 mmDimensions (L/W/H): 10645x1000x1300 mmSALVAMAC COMBO 500 – The semi-automatic miter sawwith SALVASTOP 100 - electronic length stop/slider-------------------------------------------------- -Pos. 1: Legend 500 under table miter saw-------------------------------------------------- -Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm.When cutting boards that are on top of each other, h max. 100 mm.The structure is made entirely of thick-walled and reinforced full-surfacepainted steel. Solid floor mounting system with flanged steel feetfor the mounting hole.Bimanual safety cut control in ergonomic position.Motor power of the saw motor 5.5 kW.Adjustable cutting speed via a pneumatic controller.Maximum system for  ...

cutting width: max. 310 mmCutting height: max. 125 mmSaw blade diameter: 500 mmMotor output: 5,5 kWSALVAMAC LEGEND 500 – The semi-automatic under-table cross-cut saw-------------------------------------------------- -----------Maximum cutting area: 220x125/ 260x100/ 285x80/ 310x50 mm.When sawing stacked boards h max. 100 mm.The structure is made entirely of thick-walled and reinforced throughoutpainted steel. Solid floor mounting system with flanged steel feetfor the mounting hole.Bimanual safety cutting control in ergonomic position.Engine power of the saw motor 5.5 kW.Adjustable cutting speed via a pneumatic controller.Maximum system for weight balance and longevity. Shock absorbing system.Independent pneumatic adjustment options to adapt to differentTypes of processing.Durable and easily replaceable saw blade adjustment bar.HM circular saw blade, diameter 500 mm, Z=108.Pneumatic upp ...

cutting diameter: 330 mmsaw band length: 4115 mmcutting width: 0,9 mmmain drive motor: 3,7 kWRoller conveyor length: 5000 mmRoller conveyor width: 700 mmroll diameter - bore: 150 mmtotal power requirement: 13 KVAweight of the machine ca.: 1,8 tdimensions of the machine ca.: mBandsaw filling machineThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ...

cutting diameter: 400 mmsaw band length: 4715 mmcutting width: 1,3 mmmain drive motor: 7,5 kWRoller conveyor length: 4000 mmRoller conveyor width: 700 mmroll diameter - bore: 150 mmtotal power requirement: 14 KVAweight of the machine ca.: 7,5 tdimensions of the machine ca.: mBandsaw filling machineThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ...

cutting diameter: 400 mmsaw band length: 4715 mmcutting width: 1,3 mmmain drive motor: 7,5 kWRoller conveyor length: 4000 mmRoller conveyor width: 700 mmroll diameter - bore: 150 mmtotal power requirement: 14 KVAweight of the machine ca.: 7,5 tdimensions of the machine ca.: mBandsaw filling machineThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ...

cutting diameter: 1000 mmsaw band length: . mmcutting width: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 1300 mmsaw band length: 11880 mmcutting width: 1,6 mmmain drive motor: 11 kWtable surface area: 2500x1300 mmcutting range: 1300x1300 mmtotal power requirement: 16 KVAweight of the machine ca.: 17,75 tdimensions of the machine ca.: mBandsaw filling machineThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software s ...

cutting diameter: 1300 mmsaw band length: 11880 mmcutting width: 1,6 mmmain drive motor: 11 kWtable surface area: 2300x1200 mmcutting range: 1300x1300 mmtotal power requirement: 16 KVAweight of the machine ca.: 17,75 tdimensions of the machine ca.: mBandsaw filling machineThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software s ...

cutting diameter: 1000 mmsaw band length: . mmcutting width: . mmmain drive motor: . kWcutting range: 1000x1000 mmtotal power requirement: . KVAweight of the machine ca.: . tdimensions of the machine ca.: mBandsaw filling machineThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 1000 mmsaw band length: . mmcutting width: . mmmain drive motor: . kWcutting range: 1000x1000 mmtotal power requirement: . KVAweight of the machine ca.: . tdimensions of the machine ca.: mBandsaw filling machineThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sawblade tiltable: . °cutting width: . mmMotor output: . kWThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 800 mmsaw band length: . mmcutting width: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.