subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 102)
turning diameter over bed: 400 mmturning diameter over slide rest: 280 mmturning length: 1000 mmturning diameter in the gap: mmturning speeds: 70 - 2000 U/mincentre height: 195 mmspindle bore: 54 mmtailstock quill taper MT: 3 MKconnected load frequency: 400 Vtotal power requirement: 2,2 kWweight of the machine ca.: 0.85 tdimensions of the machine ca.: 1,95 x 1,0 x 1,75 mProfessional industrial machine3-axis digital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 280mmBezel fixedBezel rotating4-fold steel holder.Halogen machine lightMachine lightFoot brakeremovable chip tray, chip protection wallHardened and ground bed railsComplete coolant systemFeed protectionMachine feetMachine toolThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 0 mmturning diameter over slide rest: 900 mmturning length: 1.000 mmtotal power requirement: 25 kWweight of the machine ca.: 8 tdimensions of the machine ca.: mHeight of centres 550 mmMax. turning Æ 1200 mmMax. turning Æ over slides, approx. 900 mmMax. turning length, approx. 1000 mmSpindle bore, approx. 90 mm24 spindle speeds 4.3 - 587 rpm Feeds, infinitely variable 1 - 170 mm/minTotal load, approx. 25 kW - 380 V - 50 HzWeight, approx. 8000 kgAccessories/specialitiesTwo separate slides, each equipped with 2-coordinate copyingequipment, program controlled by plugboard, strengthened bearingsand spindle, hardened an ...
turning diameter over bed: 250 mmturning diameter over slide rest: 140 mmturning length: 550 mmturning speeds: 50 - 2000 U/mincentre height: 125 mmspindle bore: 26 mmtailstock quill taper MT: 2 MKtailstock quill stroke: 65 mmconnected load frequency: 230 Vtotal power requirement: 1,1 kWweight of the machine ca.: 0,15 tdimensions of the machine ca.: 1,3 x 0,6 x 0,65 mBenchtop lathe 3-axis LCD digital display system fully assembled.Longitudinal feed.3-jaw chuck 125 mm.4-jaw chuck 125 mm.Clamping plate.4-way steel holder.Clock for thread cutting.Drip trayHardened bed tracks.Emergency stop switch.Forage protectionSet of wheels.Appropriate tools.Base cabinet is optionalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diámetro de torneado: 250 mmlongitud de torneado: 450 mmcontrol: TX8D diámetro: 80 mmvelocidad del husillo: 3150 U/min.Torno CNC con alimentación de barra y 3 torretas Diámetro interior del husillo muy grande, con dispositivodecarga de barra Por favor, pregunte por más detalles.
turning diameter: 250 mmturning length: 400 mmcontrol: C 200 / 8 total power requirement: 60 kWweight of the machine ca.: 8,5 tSwing Ø above bed, max. 300 mmMax. turning Ø for chucking work, approx. 250 mmTravel of Slides:Turret 1, X / Z travel 163 / 550 mmTurret 2, X / Z / Y travel 140 / 250 / 260 mmSpindle bore, approx. 65 mmTool holder bore 30 mmSpindle speeds 25 - 5,000 rpmFeed range 0 - 15,000 rpmSpindle drive 0.5 - 40 kWTotal electrical load 60 kW - 380 V - 50 HzWeight, approx. 8,500 kgAccessories / Special Features SIEMENS CNC Continuous Path Control, Model 880 (INDEX C 200-8) for at least 6 axes, with enlarged memory and with subprograms, simulation, etc. Double column loading device for large workpieces, mounted above the machine. With 3-jaw gripper and storage system for blanks and finished parts, integrated in the CNC control. Spindle indexing and pos ...
turning diameter over bed: 250 mmturning diameter over slide rest: 130 mmturning length: 550 mmturning speeds: 50 - 2000 U/mincentre height: 125 mmspindle bore: 20 mmtailstock quill taper MT: 2 tailstock quill stroke: 60 mmmetric threading: 0,4 - 3,0 mmthread - inch: 10 - 44 TPIthread - module: 0,2 - 12,5 mmconnected load frequency: 230 Vtotal power requirement: 1,0 kWweight of the machine ca.: 0,12 tdimensions of the machine ca.: 1,09 x 0,59 x 0,45 mEquipped with- 20 mm spindle passage- adjustable guideways- Powerful 1.0 kW motor- continuously variable speedScope of delivery:- 3-jaw chuck 100 mm,- 4-jaw faceplate chuck 125mm- standing and rotating bezel- Splash guard- Feed protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece diameter: 25-90 mmthreading length: 3000 mmthread pitch: 2-16 mmtotal power requirement: 25 kWweight of the machine ca.: 10,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 250 mmturning length: 100 mmcontrol: SIEMENS 840 D total power requirement: 35 kWweight of the machine ca.: 7500 kgdimensions of the machine ca.: mE M A G (Germany)Vertical CNC Controlled Hard Turning and Grinding machinewith tool turret and workpiece handling SystemModel VSC 250 DS Year 2004 # M7 28.69324_______________________________________________________Turning Ø, max. 250 mmTurning length internal / external 100 mmWorkpiece length min./max. 29 – 100 mm6-positon tool turret Ø / swing-Ø 480/790 mmWorkpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mmFeed rate / Quick feed X/Z 45/30 m/min.Feed force X/Z ...
turning diameter: 400 mmturning length: 915 mmcontrol: NUM Type 1062 T total power requirement: 12,5 kWweight of the machine ca.: 5500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 300 mmturning length: 710 mmcontrol: SIEMENS SINUMERIC 840 total power requirement: 40 kWweight of the machine ca.: 6000 kgdimensions of the machine ca.: mI N D E X (Germany) CNC Controlled Slant-Bed Chuck Lathe with Turret and Tailstockand INDEX CNC Control C 200 – 4 (SIEMENS)Model G 300 Year 1995 S/N 5000 65_____________________________________________________________Turning - Ø, with chuck, max. 300 mmSpindle bore 90 mmMax. Workpiece Swing dia. 400 / 590 mm Turning length / travel of turning slide, (X-Achse) max. 710 mmTurret head slide cross movement (Z-Axis) max. 140 mmTurret with 12 tool holder positions DIN 30 mmFeed range of turret slide / ...
turning diameter: 150 mmturning length: 500 mmcontrol: total power requirement: 4 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 200 mmturning length: 400 mmcontrol: SIEMENS SINUMERIC 840 C total power requirement: 40 kWweight of the machine ca.: 6.500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 250 mmturning diameter over slide rest: 140 mmturning length: 550 mmturning speeds: 125 - 2000 U/mincentre height: 125 mmspindle bore: 26 mmtailstock quill taper MT: 2 MKtailstock quill stroke: 65 mmconnected load frequency: 230 Vtotal power requirement: 0,75 kWweight of the machine ca.: 0,135 tdimensions of the machine ca.: 1,25 x 0,6 x 0,6 mSpeed in 6 levels 125 - 2000rpm.3-jaw chuck 125 mm.4-jaw chuck 125 mm. (Independent)Fixed bezel.Revolving bezel.4-fold steel holder.chip tray.back panel.spindle protection.Hardened bed rails.Longitudinal feed with left / right switching.Set of change gears.Associated Tools.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 320 mmturning diameter over slide rest: 200 mmturning length: 900 mmturning diameter in the gap: 320 mmturning speeds: 75 - 2000 U/mincentre height: 160 mmspindle bore: 38 mmtailstock quill taper MT: 3 connected load frequency: 400 Vtotal power requirement: 1,5 kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 1,6 x 0,75 x 1,7 mSINO digital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 250mmbezel fixedQuick-change steel holder with 4 pcs. steel holdermachine lightChip tray, chip protection wallHardened and ground bed trackslining protectionmachine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Estamos vendiendo un centro de torneado Haas ST-20 en nombre de un cliente. La máquina se instaló y nunca se utilizó de manera productiva., - Opciones de control, - paquete de opciones, - flujo de refrigerante a alta presión, - paquete de accesorios
Diámetro de giro: 60 mmLongitud de giro: 200 mmNúmero de correderas: Potencia total Requisito: 20 kWPeso de la máquina aprox.: TDimensiones de la máquina aprox.: M
turning diameter: 42 mmturning length: 250 mmcontrol: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC-lathe with bar feedwith Sameca bar feed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 1250 mmswing diameter: 1160 mmturning height: 800 mmfaceplate diameter: 1000 mmtotal power requirement: 97 kWweight of the machine ca.: 25000 tdimensions of the machine ca.: mP I T T L E R (Germany)CNC Controlled Vertical Turning and Milling CentreWith Tool Changer and Pallet ChangerModel PV 1250 / 1-1 Year 1994 _______________________________________________________Turning Ø max. 1,000 mmSwing Ø max. 1,160 mmTurning length 800 mmX Axis - horizontal 1,300 mmY Axis - vertical 800 mmFeed / quick feed 16,000 mm/minMain spindle speeds 10 - 1,000 rpm !Main spindle speeds via separate C Axis 0.1 - 16 rpmPositioning accuracy of C Axis 360° + / - 5 Tool holder ISO 50Tool drive 22 kWMax. torque / spindle speed 315 Nm / 2,500 rpmPallet size 630 x 630 mmSpindle drive ...
swing diameter: 640 mmmax. turning passage: 640 mmcontrol: Simens 840 D Powerline - - - - - Main spindle - - - - -: - - - - - -bar material dia.: 65 mmchuck diameter: 200 - 315 mmspindle bore diameter: 80 mmdiam. of main spindle in forward position: 120 mm--- Subspindle ---: - - - - - -bar material dia.: 65 mmchuck diameter: 315 mmspindle bore diameter: 80 mmforward bearing diameter: 120 mm- - - - - General data - - - - -: - - - - - -spindle distance: 1.500 mmturning length: 1.185 mmMain-/Counter -spindle turning speeds: 5.000 U/mindriven tools turning speeds: 12.000 U/minSlide cross: X1, Y1: 550 / 180 mmSlide cross: Z1: 1.185 mmSlide cross: B1: 240 °Slide cross: X2: 180 mmSlide cross: Z2: 1.050 mmSlide cross: Z3: 1.150 mmCNC Turning- and Milling Center | DMG GILDEMEISTER - GMX 250 linear equipped with main/counter spindle, chip conveyor, tool changer, a turret for driven tools and and ...
Estrella SR 32 J III Tipo B Año de hacer: 2022 La máquina aún no está a la venta, pero le invitamos a enviarnos su oferta hoy.
diámetro de giro: 530 mm0: 620 mmAncho de la rueda: 20 mmdiámetro del rollo: 45 mmrequisito de potencia total: ohne kWpeso: 250 kgdimensiones de la máquina aprox.: 1,2 x 0,30 x 1,3 m
turning diameter over bed: 250 mmturning diameter over slide rest: . mmcentre distance: ca. 400 mmcentre height: ca. 125 mmturning speed range: 80 - 3000 U/minnumber of speeds: 18 spindle bore: 24 mmtailstock quill taper MT: 3 weight: ca. 400 kgdimensions: ca. 1200 x 650 x 1300 mm4-jaw-chuck diameter: 125 mmincluding Röhm four-jaw chuck, Ø 125 mm incl. drilling and turning jaws,collet chuck device incl. collets 1-20 mm (exept 5 and 10 mm) with 1 mm gradientMultifix size A with 3 interchangeable holders,chuck protection with shutdownThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Características técnicas: Fabricante: Spinner Tipo: SB-CNC Año de hacer: 1998 Control: Siemens 840D Recorridos: X 250 mm Z 285 mm Horas de conexión: 32.156 h Husillo principal: Velocidad del husillo: 5.000 rpm Paso del husillo: 42 mm Portaherramientas: Portaherramientas: Multifix A en viga lineal Dimensiones y peso Dimensiones: 2.100 mm x 800 mm x 1.600 mm Peso: aprox. 1.500 kg Condición Condición: Usado Funcional: Probado y completamente funcional Otros equipos y accesorios incluidos: Mandril de pinza Interfaz para alimentadores de barras La máquina tiene una elevación del cabezal de 10 mm.
: 350 mm: 0650 mm: : 175 mm: 42 mm: 315 mm: 3500 U/min : D1-4 DIN 55029 : 63 mm: 140 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control: OSP-P 300S-H Viajar: Eje X: 695 mm Eje Y con carrera: +150/ -150 = 300 mm Eje Z: 1.600 mm Eje B: 240, posicionamiento en 0,001 Eje C: 360, posicionamiento en 0,001 Eje W: 1.524 mm Diámetro de giro: 650 mm Longitud de giro: 1.500 mm Montura: HSK 63 Posiciones totales de la herramienta: 40 Accesorios: Eje XA y YA con sistema de medición absoluta directa (Escala Okuma ABSO) Medición durante el proceso con sondas de eje X/Z de Renishaw Medición en el eje Y, incluida la medición en modo de eje oblicuo KitagawaB215A11 máx. 2.800 rpm KitagawaB210A8 máx. 4.200 rpm Cilindro de apriete hueco Kitagawa F 2596-H01 96 mm IGF de un solo toque Software Multi-Herramienta Oscilación de velocidad armónica Paquete de software Mecanizado simultáneo de 5 ejes Transportador Depósito de refrigerante con bomba de alta presión 70b ...
7 ejes Paso máx. del husillo: 16 mm Carrera máx. del cabezal: 205 mm HUSILLO PRINCIPAL Velocidad del husillo: 10000 1/min Potencia del accionamiento del husillo: 3,7 kW Resolución mínima del eje C: 0,001 [grados] SUBHUSILLO - Máx. cabeza de articulación: 16 mm - Velocidad del husillo : 9000 1/min - Resolución mínima del eje C: 0,001 [grados] HERRAMIENTAS 5x Portaherramientas de torneado en corredera lineal 4x unidad de perforación incl. soportes de perforación (delantero/trasero) 3 herramientas motorizadas para el mecanizado transversal en carros lineales 4x herramientas incl. portabrocas para el mecanizado del reverso Velocidad de las herramientas motorizadas : 7500 1/min Transportador Alimentador de barras FMB minimag 18/3200
turning diameter over bed: 360 mmturning diameter over slide rest: . mmturning length: 750 mm3-jaw chuck: Durchmesser 160 mm tail stock: Multifix lighting: turning speeds: max. 2500 U/minquick change tool holder: System Accessories and cabinets can be purchased optionallyThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software so ...
faceplate diameter: 1250 mmswing diameter: 1450 mmturning height: 1200 mmslide adjustment: 800 mmside head - cross travel: 600 mmdigital readout: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore for usnot binding. We reserve the right to prior sale, it applyonly our businessand conditions of sale.About Usmore than 400 own machines in stockover 12000 m² storage area, crane capacity 70 tmore than 10000 articles accessories for your workshopYou want to sell machines, production lines or your company,Then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 650 mmturning length: 2000 mmturning diameter over slide: 260 mmHolder Multifix: control: Siemens type: Sinumerik tailstock quill taper MT: 5 transmission ratio: 2 turning speeds: 1-2000 U/minspindle bore: 106 mmtotal power requirement: 38 KWweight of the machine ca.: tdimensions of the machine ca.: 7,4x2,5x2,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 65 mm
Centro de torneado y fresado CNC Torno CNC utilizado Torno universal CNC Fabricante: Traub Tipo: TNA 300 Año de hacer: 1996 Husillo ø 65mm Contrapunto Herramientas motorizadas Transportador Control TX8H FlexIPS (en inglés) Mandril de pinza con pinzas de 5 mm a 65 mm Mandril de tres mordazas Varios portaherramientas fijos, giratorios y giratorios en ángulo Etcetera... incl. almacén de carga de barra Traub DNH 61 3000, año de fabricación 1996 ¡Incluye muchos accesorios! Ubicación de la máquina: Nahe 93047 Ratisbona La máquina se puede ver en el sitio. Todavía está energizado y funciona perfectamente. Nos encantaría saber de ti.
