subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 102)
Key data: 1350 mm, 11000 mm
Torno CNC Hacer Swift CNC Fanuc 21i-MB Inspección bajo potencia Año 1978 Entre centros .. 11.000 mm Columpio sobre la cama .. 1.350 milímetros Columpio sobre el carruaje.. 1.000 milímetros Chuck dia .. 1 .200 milímetros Peso máx. de la pieza de trabajo 20 toneladas Potencia del motor .. 40 kW RPM 150 C/W 2 Estabilizadores
Key data: 1400 , 1000 , 11280
Torno de alta resistencia SKODA SRM Diámetro de giro sobre la cama 1400mm Diámetro de giro sobre soporte 1000mm Longitud de torneado 11280mm Placa frontal 1250mm Peso de la pieza en los soportes máx. 20000 kg Bisel 395mm Bisel 620mm Peso de la pieza de trabajo 16000kg Potencia total requerida 40kW
HNK HCL 41x14 cigüeñal torno CNC Max. Swing Dia. Sobre el carro Ø4,100mm Max. Distancia central 14,000mm Chucking Ø700 ~ 2,000 mm Descanso constante Ø510 ~ 860mm Max. Carga 160Ton
O-M LTD. Fresadora vertical CNC CONTROLES CNC FANUC 16T-A, RETROFIT 1994 CAPACIDAD: DIÁMETRO DE LA MESA 4000mm DIÁMETRO MÁXIMO DE GIRO 7000mm ALTURA MÁXIMA DE GIRO 2900mm ALTURA MÁXIMA BAJO RIEL 3000mm CAPACIDAD DE PESO DE LA MESA 45400kg RECORRIDO VERTICAL DE LA MEMORIA RAM, EJE Z 1500 mm RECORRIDO HORIZONTAL DE LA MEMORIA RAM, EJE X 2550mm RANGO DE VELOCIDADES DE LA MESA .55-40 RPM VELOCIDADES DE LA TABLA 16 PASOS RANGO DE ALIMENTACIÓN VERTICAL RAM HEAD 0.003-.6 IPR RECORRIDO RÁPIDO, CABEZAL HORIZONTAL 49 IPM RECORRIDO RÁPIDO, CRUCE FERROVIARIO 12 IPM RECORRIDO RÁPIDO, COLUMNA 21 MIP PAR MÁXIMO 58,000 LB/FT EQUIPADO CON: CONTROLES CNC FANUC 16T-A (RETROFIT 1994) MESA RANURADA EN T DE 4000 mm CON 4 MANDÍBULAS SUPERIORES COLUMNA AJUSTABLE ABIERTA ARIETE OCTOGONAL VERTICAL SOBRE RIEL TRANSVERSAL REFRIGERANTE PROTECTORES DE CHIP TRANSPORTADOR DE VIRUTAS ...
Froriep CNC Molino de mandrinado vertical Doble columna RECONSTRUIDO Y MODERNIZACIÓN CNC EN 1999 FUNCIONES: SIEMENS 840D CNC CONTROL 2 CABEZALES DE RAM VERTICALES CAPACIDAD: DIÁMETRO DE LA MESA: 10,000mm DIÁMETRO DE GIRO CON ARIETES VERTICALES: 15.000 mm ALTURA MÁXIMA DE GIRO: 5000mm RECORRIDO VERTICAL DE LA RAM: 2000 mm RAM GIRATORIO +/- 30/15 DEG FUERZA MÁXIMA DE CORTE DEL RIEL DERECHO HD: 25t CAPACIDAD DE CARGA DE LA MESA: 200t RANGOS DE VELOCIDAD DE LA TABLA, VARIABLE INF: 4 VELOCIDADES DE TABLA: 0.13 A 13 RPM MOTOR DE ELEVACIÓN DE RIEL CRUZADO: 40.23 HP NÚMERO DE ALIMENTACIONES, VERTICALES Y HORIZ: 30 MOTOR DE AJUSTE DE CARRIL CRUZADO 86 CV MOTORES DE RECORRIDO RÁPIDO: 15.5 HP MOTOR PRINCIPAL: 250 CV EQUIPADO CON: SIEMENS 840D CNC CONTROL NUEVO 1999 CONTROLES OPERADOS POR DOBLE COLGANTE 2-VERTICALES DE CARNEROS CONTROLADOS POR CNC MESA R ...
MORI SEIKI NT6600 CNC CENTRO DE TORNEADO DE MOLINO INTEGRADO CON FRESADO EN VIVO SWING MÁXIMO SOBRE LA CAMA: 42 pulgadas DIÁMETRO MÁXIMO DE LA PIEZA DE TRABAJO: 42 pulgadas LONGITUD MÁXIMA DE LA PIEZA DE TRABAJO: 239 pulgadas DIÁMETRO MÁXIMO DE LA BARRA: 6.4inch DIÁMETRO DEL HUSILLO: 7 pulgadas X AXIS TRAVEL: 41 pulgadas RECORRIDO DEL EJE Y: 26 pulgadas RECORRIDO DEL EJE Z: 242 pulgadas EJE B: +/- 120 GRADOS. VELOCIDAD DEL HUSILLO PRINCIPAL: 1500 RPM MOTOR DEL HUSILLO PRINCIPAL: 40 HP VELOCIDAD DEL HUSILLO DE FRESADO: 8000 RPM MOTOR DEL HUSILLO DE FRESADO: 40 HP ELECTRICIDAD: 220V / 3P / 60Hz / 216A OAD (APROXIMADO): 490inch X 182inch X 169inch HIGH PESO (APROXIMADO): 120,560 LBS. EQUIPADO CON: EJE C YAXIS EJE B HERRAMIENTAS/FRESADO EN VIVO CHUCK de 20 pulgadas FS-31iA5 CNC CONTROL CAMBIADOR AUTOMÁTICO DE HERRAMIENTAS DE 140 POSICIONES CULATA PROGRAMABLE ...
TORNO GIRATORIO CNC FABRICANTE: M+M MODELO: HF450TT/2S NÚMERO DE SERIE: 26-2453-00 AÑO: 2000 FABRICANTE Y MODELO DE CONTROL: Tracktronic ALTURA CENTRAL DEL EJE Z: 419 mm DISTANCIA ENTRE CENTROS: 1200mm ADAPTADOR DE HERRAMIENTAS Z -AXIS: DIN 55027 / Tamaño 15 POTENCIA DE ACCIONAMIENTO DEL EJE Z: 80kW TASA DE REDUCCIÓN Z-AXIS DRIVE ZF: 1:4 VELOCIDAD DE ACCIONAMIENTO DEL EJE Z: 0-1000 RPM paso menos variable X - RECORRIDO DESLIZANTE: 500 mm X - FUERZA DE DESLIZAMIENTO: 100kN X - VELOCIDAD DE DESLIZAMIENTO: 400 mm / min Y - RECORRIDO DE LA DIAPOSITIVA: 275 mm Y - FUERZA DE DESLIZAMIENTO: 100kN Y - VELOCIDAD DE DESLIZAMIENTO: 400mm/min RECORRIDO DE LA CULATA: 600 mm FUERZA DE SUJECIÓN DE LA CULATA: 80kN RECORRIDO DEL EYECTOR: 450mm REFRIGERANTE: sí POTENCIA 3PHASE / 50-60 Hz / 200 - 500 Voltios: 3PH/60Hz/480V existente CARACTERÍSTICAS ESPECIALES O ARTÍCULOS ADI ...
Torno automático pequeño/came con área de trabajo cerrada, barra/área de alimentación y unidad motorizada. Máquina usada con desgaste visible; adecuada para reparación, piezas o taller. Fabricante/modelo y especificaciones completas por confirmar. Auction-ID: A1-51153-39
turning diameter:150 mmtotal power requirement:36 kWdimensions of the machine ca.:6,20 x 5,16 x 3,35 m
turning diameter:150 mmtotal power requirement:36 kWdimensions of the machine ca.:6,20 x 5,16 x 3,35 m
faceplate diameter:1800 mmswing diameter:2000 mmturning height:1170 mmz-axis:1000 mmcross rail adjustment - vertical:800 mmfaceplate speeds::2,5 - 280 workpiece weight:12 tfeeds:1 - 6000 mm/minmax. torque on the faceplate:50000 Nmtotal power requirement:85 kWweight of the machine ca.:41 tdimensions of the machine ca.:5,6 x 4,8 x 4,6 mMachine retrofit and overhould in 2005 with SIEMENS 840 D powerline control- 6 jaw hydraulic power chuck- tool changer for 12 tools- chip conveyor, coolant attachment, splash housing- various tool holders
faceplate diameter:1000 mmswing diameter:1600 mmturning height:1200 mmmain drive:75 kWfaceplate speeds from - to:7 - 800 U/minmilling motor:25 kWmilling head speed:7 - 3000 U/minmilling spindle - taper:ISO 50cross rail adjustment - vertical:800 mmram head dimension:240 x 240 mmweight of the machine ca.:40 todimensions of the machine ca.:9 x 7,8 x 6,0 mMachine general overhould in 2004 and equiped with Siemens 840 D control- tool changer rack magazine- C-axis, live tooling, - Transmit function electronical Y-axis- angular milling head - complete splash housing - coolant device, chip conveyor
faceplate diameter:1400 mmswing diameter:2000 mmturning height:1270 mmmain drive:80 kWfaceplate speeds from - to:1 - 355 U/minmax. workpiece weight:6.000 kgmilling motor:37 kWmilling head speed:7 - 3000 U/minmilling spindle - taper:ISO 50cross rail adjustment - vertical:800 (8 x 100 mm) mmram head dimension:240 x 240 mmmax. ram stroke:1250 mmweight of the machine ca.:50 tototal power requirement:133 kVAdimensions of the machine ca.:11 x 5 x 6,4 mMachine general overhould in 2008 and equiped with CNC SIEMENS 840 D control- tool changer for 72 tools- C-axis, live tooling- angular- and straight tool holder head with CAPTO taper - Transmit function- complete splash housing - coolant device, chip conveyor- diverse accessories
turning diameter:300 mmswing diameter:350 mmturning height:275 mmx-axis:925 mmz-axis:250 mmclamping chuck diameter:200 mmFeed speed:30 m/min.total power requirement:45 kWweight of the machine ca.:7 tMachine was used just from time to time in the last years - very good condition!with CNC SIEMENS 840 D12-station turret head with driven toolingsworkpiece in and out conveyor beltcoolantattachment and chip conveyordiverse accessories
turning diameter over bed:1000 mmturning diameter over slide rest:745 mmturning length:3000 mmturning speed range:4,5 - 900 U/minspindle bore:110 mmmax. workpiece weight between centres:12500 kgtotal power requirement:30 kWweight of the machine ca.:9 tdimensions of the machine ca.:5,2 x 2,3 x 2 m3-axes digital readoutrapid feed, feed at upper support 350 mm 1 fixed steadyface plate diameter 1000 mmcoolant attachment
turning diameter:275 mmturning length:900 mmspindle passage:65 mmpower capacity at 100 % load:25/20 kWspindle turning speed range:1 - 5000 U/minspindle diameter in front bearing:110 mmc-axis:1 - 500 U/min.number of workpiece supports:4 tool turret:1 x-axis:290 mmy-axis:165 mmz-axis:360 mmb-axis:360 °rapid speed:18/30 m/minnumber of tools:2x2 + 2x2 number of driven tools:2x2 + 2x2 mmtoolpiece turning speed range:8000 / 2000 U/minpower capacity:25% ED 5,8 kWtool taper:TRAUB 60 tool turret:2/3/4 x-axis:170 mmz-axis:600/950 mmy-axis:+/- 60 mmrapid speed:18/15/30 m/minnumber of driven tools:10 mmtoolpiece turning speed range:1 - 6000 U/minpower capacity:25% ED 5,8 kWtool taper:DIN 69880 40 x 63 total power requirement:95 kWweight of the machine ca.:16 tdimensions of the machine ca.:10,0 x 3,5 x 3,0 mwith CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000,Main and Sub spindle with C-axis1 ...
turning diameter:830 mmturning length:4000 mmturning diameter over bed slide:540 mmspindle bore:130 mmturning speed range:2 - 1600 U/minrapid speed:4 / 5 m/minfeed speeds:1 - 2000 mm/mintotal power requirement:55 kWweight of the machine ca.:7,5 tdimensions of the machine ca.:7 x 2,2 x 2 mwith Teach In controll R&D MTC-KMULTIFIX toolpost size Dcoolant attachment
turning diameter:500 mmturning length:1500 mmturning diameter over bed slide:290 spindle bore:71 mmturning speed range:3 - 2800 U/minrapid speed:10 / 5 m/minfeed speeds:1 - 2000 mm/mintotal power requirement:22 kWweight of the machine ca.:3,2 tdimensions of the machine ca.:3,0 x 1,6 x 2 mwith Teach In controll R&D MTC-KPARAT toolpost 1 fixed steday dia. 100 mm4 jaw face plate dia. 500 mmcoolant attachment
turning diameter over bed:340 mmturning diameter over slide rest:190 mmturning length:700 mmspindle bore:50 mmspindle turning speed range:40 - 3000 U/mintotal power requirement:6 kWweight of the machine ca.:1,0 tdimensions of the machine ca.:2 x 1 x 1,6 m
turning diameter:800 mmturning length:2965 mmmax. turning dia. over saddle:520 mmspindle bore:92 mmturning speed range:3 - 1800 U/minspindle head:Größe 11 total power requirement:37 kWweight of the machine ca.:6,5 tdimensions of the machine ca.:5,2 x 2,2 x 1,9 mTeach In Control MTC-K3-jaw chuck ROTAS Dia. 400 mmface plate RÖHM Dia. 630 mm4-station toolholder system PARAT 1 fixed steady coolant attachment and chip conveyor
turning diameter:33 mmturning length:330 mmcontrol: 840 total power requirement:20 kWweight of the machine ca.:6 tdimensions of the machine ca.:3850,2000,2100 m17 axes3 revolvers with the powered tools 1 gantry with the driven tools Main and counter spindle with C axesBarfeederMachine On-time 58,133 hours
turning diameter:480 mmturning length:800 mmtotal power requirement:30 kWturning diameter over bed slide:240 spindle bore:65 mmdisc turret:12 fachrapid travel range:20 / 10 m/minweight of the machine ca.:4,5 tdimensions of the machine ca.:4 x 2,2 x 2,1 mwith CNC TRAUB TX 8 H C-axis driven tooling, 6 positions 3,5 kW / 4000 rpmpower chuckcoolant attachment, chip conveyordiverse toolholders
turning length:400 mmtotal power requirement:45 kWweight of the machine ca.:4 tdimensions of the machine ca.:3,58 x 1,91 x 2,05 mspindle passage:45 mm
turning diameter:500 mmturning length:1000 mmweight of the machine ca.:7,3 tdimensions of the machine ca.:6,5 x 4,45 x 2,21 m
turning diameter over bed:350 mmturning diameter over slide rest:240 mmturning length:800 mmSpindle RPM:40 - 2000 in 8 Stufen 1/mintotal power requirement:3 kWSpindle bore:26 mmtailstock quill taper MT:MK 2 dimensions of the machine ca.:1,5 x 1,0 x 1,6 mweight of the machine ca.:1,9 tVery well maintened center lathe with accessories- 3-jaw, 4-jaw chuck- tailstock with center- 1 boring head- RAPID quick tool change device with 3 holder- saddle mounted steady rest- collant device- set of collets appr. 75% size B 32
turning diameter:120 mmturning length:100 mmcontrol:Fanuc Spindle 1 power:7,5 kWSpindle 1 RPM:4500 1/minSpindle 2 power:7,5 kWSpindle 2 RPM:4500 1/minDistance between spindle noses:600 mmTurret No.1 stations / rotary tools:15/15 Power rotary tools turret 1:2,7 kWRPM of rotary tools turret 1:4000 1/minTurret No.2 stations / rotary tools:15/15 Power rotary tools turret 2:2,7 kWRPM of rotary tools turret 2:4000 1/minTravel x/z turret 1:250 / 300 mmTravel x/z turret 2:250 / 920 mmBar capacity spindle 1:51 mmBar capacity spindle 2:51 mmpower chuck:165 mm Spindle bore sp. 1:62 mmSpindle bore sp. 2:62 mmdimensions of the machine ca.:3700 x 2300 x 3000 mmweight of the machine ca.:5600 kgUsed CNC-2-spindle CNC turning and milling center with gantry loader- 2x 15 station turret-automatic gantry loader with turnaround station.14 station-magazin right sideMax. Parts size Ø 120 x 100 mmDoublegripper ...
turning diameter:370 mmturning length:200 mmSpindle 1 RPM:4000 1/mincontrol:Siemens 840 D Spindle 2 RPM:4000 1/minpower capacity:L / R 18/24 kWmax. torque on the spindle:630 nMC-Axis:0,001° Turret No.1 stations / rotary tools:12/12 VDI 40Turret No.2 stations / rotary tools:12/12 VDI 40turning speed range - milling:3000 1/minpower capacity - milling spindle:8,8 kWtorque rotary tools:28 NmBar capacity spindle 1:85 mmtotal power requirement:65 kVAweight of the machine ca.:13 tdimensions of the machine ca.:5,7x2,4x2,1 mTravel x1:260 mmTravel x2:260 mmTravel Y1:600 mmTravel y2:600 mmPower Chuck:2 x 250 mm manual tool eye:l & r High performance 6-axis subspindle CNC-Lathe with twin turren and rotating tools.
standard turning dia.:200 turning length:max. 810 mmcontrol:MSX-701 MAPPS IV greates pass round over bed:800 mmMax. distance between centres:1130 mmmax. turning diameter:320 mmmax. workpiecediameter:300 mmbar material dia.:65 mmTraverse X-Axis 1:210 Traverse X-Axis 2:210 mmTraverse X-Axis 3:210 mmTraverse Y-Axis 1:110 (+65/-45) mmTraverse Y-Axis 2:110 (+45,/-65) mmTraverse Z-Axis 1:300 mmTraverse Z-Axis 3:300 mmTraverse Z-Axis 2:810 mmTraverse B-Axis:870 mmturning speed range - spindle:5.000 1/minNumber of spindle speed ranges:2 .spindle nose:JIS A2-6 spindle bore:73 mmspindle bearing diameter:120 mmC-Axis:0,001 °turning speed range - spindle:5.000 1/minspindle nose:JIS A2-6 spindle bore:73 mmbar material dia. max:65/52 mmspindle bearing diameter:120 mmC-Axis:0,001 °Number of Turrets:3 .Number of tool stations:16 x 3=48 posSchank height for square tool:20 mmDiameter of boring bar:32 mm ...
650 € 
