subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 201)
Diseño de precisión para profesionales con alto rendimiento de corte y muchas opciones de equipamiento Descripción Diseño de alta resistencia con alto peso muerto para máxima suavidad Funcionamiento especialmente suave y preciso gracias a la carcasa resistente a la torsión Volantes de inercia fundidos con recubrimiento de goma y cepillo de limpieza Guía de sierra de precisión de 3 rodillos en la parte superior e inferior como estándar Gran mesa de sierra de hierro fundido, giratorios de 0 a +15 con superficie pulida y pulida Gran valla de tirador de hierro fundido con guía de varilla redonda, fácil de mover Indicador de tensión de la hoja de la sierra Ajuste preciso de la altura de corte mediante rack con escala milimétrica Motor autofrenante Disponible bajo demanda Versión con altura de corte de hasta 1650 mm Otros diseños especiales La mesa ...
Raimann con múltiples sierras Tipo: KM 310 Año de fabricación: 1997 d.C. Ancho máximo de corte 310 mm Altura de corte ajustable de 10 a 90 mm mediante volante Altura máxima de corte sin criba de presión 90 mm, con criba de presión 75 mm Ancho de paso a la derecha de la hoja de sierra: 150 mm Ancho máximo del pasaje: 650 mm Motor de sierra 30 kW Frecuencia de alimentación controlada 0,75 kW Ancho de cadena 340 Diámetro del eje de sierra: 65 mm diámetro máximo de la hoja de sierra: 300 mm Diámetro de la hoja de sierra sin vaso de 80 mm, con vaso de 80 mm Velocidad del eje de la sierra: 4200 rpm. Velocidad de avance infinitamente variable de 5 a 35 m/min. Diámetro de la conexión de extracción 200 mm Velocidad del aire: 30 m/s Volumen de aire 3400 m³/h Cadena de transporte con pinchos Máquina en buen estado, lista para usar incluyendo cinta transport ...
Key data: 5600 mm, 40 mm
Sierra panelada Holzma con carga de mesa elevadora Tipo: HPL 11/X/56/27/L Año de fabricación: 2001 Formato de placa máximo 5600 x 2700 mm, mínimo 1525 x 1220 mm Grosor de la placa máximo 40 mm, mínimo 3,2 mm Altura máxima del paquete 110 mm Tamaño prefabricado mín. 100 x 100 mm Se pueden cortar tiras estrechas de hasta 30 mm de ancho. Con carga con mesa elevadora Altura de apilamiento en la entrada y salida máximo 480 mm Desplazamiento de apilamiento máximo 20 mm Motor principal de sierra 18 kW Motor de sierra de perforación 2,2 kW Apertura del collet, 130 mm Diámetro de la hoja de sierra: 450 mm Protuberancia de la hoja de sierra 125 mm Longitud de corte 5600 mm Ancho de corte (recorrido del deslizador programado) 5600 mm Mesa de elevación 5600 x 2700 mm, carga útil 10 a. con cinta transportadora de rodillos accionados y convertidor de frecuencia M ...
: 15282 90 band length: 4600 - max. 4750 mm: Fabr. Ideal weight: ca. 890 kgdimensions of the machine ca.: 130 x 850 x 2300 mmPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sierra circular Sierra de mesa Sierra circular Altura de corte 280 mm Diámetro de la hoja de sierra: 750 mm Potencia del motor 7 kW Transmisión por correa en V de 3 correas en V Tamaño de la mesa: 1250 mm x 940 mm Registro deslizante en la mesa Longitud de tope 1200 mm x altura 125 mm Ancho de corte a la derecha de la hoja de la sierra: máximo 550 mm Diámetro de conexión de extracción 120 mm Peso con palé 340 kg Dimensiones 1600 mm x 1100 mm x H 1350 mm Dimensiones de carga 1400 mm x 1100 mm x H 1600 mm
Key data: 500 mm, 180 mm
Sierra transversal bajo la mesa Ancho de corte aprox. 500 mm Altura de corte aprox. 120 mm Movimiento transversal desde abajo, continuo de delante hacia atrás El condensado se activa mediante un pedal Motor aprox. 3 kW Diámetro de la hoja de sierra 500 mm, hoja de sierra con punta HM Conexión de succión en el cuerpo de la sierra en la parte inferior trasera de diámetro. 100 mm en cada lado la cinta transportadora de rodillos de 3000 mm de longitud, longitud de rodillo 500 mm, Diámetro del rodillo 80 mm, espaciado entre el rodillo y el centro 205 mm Un transportador de rodillos con 2 topes de longitud deslizante Dimensiones externas: L 6800 mm x Anor 950 mm x Alto 1300 mm
Three-function combined table circular saw, slotted hole drilling and milling machine by Kirchner, Leipzig. Without milling arbor. Technical data: Motor: 3 kW Condition: Gebraucht Location: Tauberbischofsheim, Germany
Portable firewood saw for cutting up strips, branches and other waste wood. Technical data: Length: 950 mm Width: 600 mm Cutting height: approx. 60 mm Motor: 1.5 kW Power supply: 220 V Condition: Gebraucht Location: Tauberbischofsheim, Germany
Portable firewood saw for cutting up strips, branches and other waste wood. Technical data: Length: 950 mm Width: 600 mm Cutting height: approx. 60 mm Motor: 2.2 kW Connection: 16 A / 400 V Condition: Gebraucht Location: Tauberbischofsheim, Germany
The EMMEGI wood and aluminium cross-cut saw is designed for cutting to length and mitre cuts: swivelling Technical data: Motor: 0.55 kW / 220 V Cutting height: approx. 50 mm Cutting depth: approx. 80 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany
Rema DMGB-35 double cross-cut saw, including an outfeed conveyor belt, for cross-cutting timber on both sides. This machine was specifically used for cutting doors to size. In its current condition, the cutting length is limited to 1,000 mm, but this can be extended. Technical data: Belt length: approx. 1,700 mm + 2,700 mm Cutting width: max. 2,500 mm Cutting height: max. approx. 80 mm Condition: Gebraucht Location: Unbekannt, Belgium
Pfeiffer Piccolo pendulum saw with a sturdy roller feed system for cutting boards and beams. The machine is fitted with a pneumatic saw feed mechanism with a safe two-hand operation system. Video available on request. Technical data: Cutting height: max. approx. 120 mm Cutting width: max. approx. 600 mm Roller table: 250+360 cm Feed: Pneumatic Condition: Gebraucht Location: Tauberbischofsheim, Germany
Striffler Type 2750-E double mitre circular saw for precise mitre and cross cuts in timber profiles, mouldings and frames. The machine is ideally suited to mass production in the window, door and furniture manufacturing sectors, thanks to its two pneumatically swivelling saw units and electronic positioning. Technical data: Cutting length: approx. 2,200 mm Mitre angle: 45° 90° Workpiece: max. 50 × 70 mm Further details: See PDF Condition: Gebraucht Location: Tauberbischofsheim, Germany
Graule AGT combined pull-through and table circular saw. The pull-through saw can be tilted and swivelled. The machine can also be used solely as a pull-through saw by removing the table. Cutting height 85/40 mm Technical data: Cutting length: max. 380 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany
Dimter OptiCut 700 automatic optimising cross-cut saw (sliding saw) for cutting very wide timber to size according to defects (marked with fluorescent chalk) and length. Technical data: Cutting height: max. 120 mm Feed length: max. 5,500 mm Cutting width: max. 700 mm Saw blade diameter: max. 700 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany
Bäuerle KFL Milling and Drilling Machine The robust Bäuerle KFL combined woodworking machine combines a panel saw, a long-hole drilling machine and a table milling machine with feed in a single unit, and comes with a comprehensive range of accessories. Technical data: Motors: 2 Length: approx. 320 cm Width: approx. 140 cm Height: approx. 160 cm Table: swivelling Technical details: on request Condition: Gebraucht Location: Tauberbischofsheim, Germany
Sturdy Pehaka band saw for sawing timber and other materials. Technical data: Roller diameter: 800 mm Motor: 3 kW Clearance height: max. approx. 350 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany
The Graule ZS 85 N mitre saw is designed for cutting to length and making mitre cuts: it can be swivelled and tilted. Cutting height 85 mm Cutting length 380 mm Technical data: Motor: 1.5 kW Connection: 380 V Condition: Gebraucht Location: Tauberbischofsheim, Germany
Large A. Recker ATS-type mobile timber circular saw for various sawing tasks in workshops or on construction sites. Condition: Gebraucht Location: Tauberbischofsheim, Germany
The Ulmia 1622 table saw is designed for precise rip and cross cuts in solid timber and wood-based materials. Its robust construction ensures reliable performance in craft workshops and general workshops. Ideal for joinery and general timber and furniture construction. Technical data: Table size: 560 x 710 mm Saw blade diameter: max. approx. 300 mm Motor: 1.5 kW Condition: Gebraucht Location: Tauberbischofsheim, Germany
SCM Type M3 multi-blade and trimming circular saw for efficient rip cutting, trimming and cutting to size of solid timber, boards and planks. This robust machine is suitable for precise batch cutting with multiple saw blades and a continuously adjustable chain feed. Technical data: Chain width: 300 mm Cutting height: ~100 mm Engine: 35 PS Condition: Gebraucht Location: Tauberbischofsheim, Germany
APK special-purpose automatic sawing and milling machine for cutting timber blocks to length and subsequently milling them. Custom-built for the production of cutlery tray inserts (see pictures) or similar workpieces. Workflow: 1. Feeding the material from the magazine 2. Cutting to length (sawing) to the desired length 3. Milling the sawn workpieces 4. Ejection of the finished part. Technical data: Workpiece length: 55170 mm Workpiece height: max. 27.5 mm Workpiece width: max. 28 mm Milling units: 2 Cross-cut saw: 1 Condition: Gebraucht Location: Tauberbischofsheim, Germany
Flotjet 2000 table-type circular saw, model 480003, for precise rip, cross and mitre cuts in small pieces of solid timber, sheet materials and plastic. The robust construction, the swivelling table and the integrated sliding table enable flexible and precise workpiece guidance and high cutting accuracy. Suitable for furniture making, interior fit-out and craft workshops. Technical data: Pitch: ~ 650 mm Cutting width: ~ 170 mm Cutting height: ~ 40 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany
Graule Type ZS 135 N crosscut and mitre circular saw for precise cross-cutting and mitre cutting of solid timber, mouldings and profiles with a high cutting height. It can be swivelled and tilted. Its robust construction and precise angle adjustment enable clean and repeatable cuts in craft work and workshop production. Ideal for all woodworking businesses. Includes base frame. Cutting height ~ 135 mm Cutting length ~ 460 mm Technical data: Motor: 2 kW Connection: 380 V Condition: Gebraucht Location: Tauberbischofsheim, Germany
Second-hand Martin T72 A panel saw for professional cutting work in woodworking. The machine is suitable for typical panel cutting and sawing tasks when working with wood-based materials. Technical data: Cutting height: ~ 145 mm Cutting width: ~ 1,300 mm Cutting length: 3,300 mm Tilt angle: 45° Stop: Digital Adjustment: Electronic Rip fence: Manual Condition: Gebraucht Location: Tauberbischofsheim, Germany
Striebig Automat TRK 6220 AV vertical (floor-standing) panel cutting saw with Schneeberger Positron positioning control for the precise horizontal and vertical cutting of wood-based, plastic and composite panels. Can be freestanding or wall-mounted. The machine operates with manual feed; the automatic feed function is currently not operational. Technical data: Cutting length: 5,300 mm Cutting width: 2,200 mm Material thickness: max. 80 mm Motor: 5.5 kW Condition: Gebraucht Location: Tauberbischofsheim, Germany
Sierra de panel fabricada en 2025. Este Wehrmann WT-50/900 está diseñado para el corte clásico de madera y materiales a base de madera, con un ancho máximo de panel de 450 mm y un grosor que varía entre 8 mm y 40 mm. Incluye un diseño fácil de usar con accionamientos controlados por servo y un robusto chasis de acero. Si buscas capacidades de corte de alta calidad, considera la sierra Wehrmann WT-50/900 que tenemos a la venta. Contáctanos para más detalles.
Sierra de péndulo manual IRION Ajuste 45° + / - Grosor de corte de 160 mm Conexión por succión Motor 7,5 KW ¡En plena forma! Disponible inmediatamente desde la ubicación
Key data: 5300 mm, 2200 mm
Sierra de panel vertical Dimensión de corte máx. 5300 x 2200 x 80 mm Pared trasera evasiva motorizada Financiación Ataque en tiras
Sierra de panel fabricada en 1999. Este HOLZMA HPV11 tiene una dimensión máxima de panel de 2.100 x 4.100 mm y puede cortar hasta 6 paneles simultáneamente. Incluye mesas elevadoras y un Liftomat, junto con una mesa de limpieza ajustable automáticamente en altura. Si buscas capacidades de corte de alta calidad, considera la sierra de panel HOLZMA HPV11 que tenemos a la venta. Contáctanos para más detalles.
