rectificadoras madera usadas para la venta (646)

Gebr. Máquina de rectificar cinta larga JOHANNSEN T96 YOC 1994 Carga total conectada: 5,7 kW / Corriente nominal: 12,5 A Potencia del motor: 4,0 / 5,5 kW 2 velocidades de correa Tamaño de la mesa: 278 x 95 cm electr. Plataforma elevadora Dimensiones del cinturón: 150 x 7.800 mm Longitud máxima utilizable de la banda de lija: 260 cm Gran desplazamiento (derecha): 1.000 x 310 mm Desplazamiento izquierdo: 550 x 310 mm Unidad de molienda neumática (presión neumática) incluyendo 2 zapatas de lijado: 300 + 450 mm (incluyendo dispositivo de succión) Brazo de succión para aspirar la zapata de lijado Dispositivo de sujeción por succión por vacío (pneum. sujetación de piezas de trabajo) con 8 ventosas incluyendo bomba de vacío Tocadiscos (de carrera neumática) Tabla de lija con tope Selector para rotación en sentido horario y antihorario Boquilla de succión dere ...

Key data: 1350 mm, 1

- Ancho de trabajo 1350 mm - Rodillos de presión cauchosados - Mesa de rodillos en la entrada y salida - Velocidad de alimentación de la banda 2,5-13 m/min, ajustable infinitamente, correa perforada (preparada para el dispositivo de tensión al vacío mediante un motor externo, no incluido) - Unidad de rectificado de rodillos de contacto combinado (15 kW), con barra de presión del enlace eléctrico (ancho del elemento 25 mm), velocidad de la banda variable infinitamente de 2,5 a 20 m/s, longitud/ancho de banda 2150/1370 mm, dispositivo de despegue de correa, reposazapatillas de lijado en la máquina, pneumometria. Dispositivo de tensión de banda abrasiva - 1 cepillo giratorio para limpiar piezas (0,75 kW) en el lado de salida de la máquina - Pintura: RAL 5018 - Carga total conectada aprox. 22 kW (36 A) - Tensión de funcionamiento: 400 V, 50 Hz Datos técnicos sujeto ...

Key data: 1100 mm, 3 , 150 mm

Lijadora de cinta ancha BÜTFERING, AWS-3E-1100, # 0-001-747-312, año 1991 DATOS TÉCNICOS: Ancho de trabajo máximo: 1.100 mm Altura de trabajo máxima: 150 mm Banda abrasiva de ancho 1.110 mm Longitud de la banda de lijado 1.900 mm 1. Unidad de molienda Rodillo de contacto de acero perfilado D=200 mm Potencia del motor 15 KW 2. Unidad de rectificado Unidad combinada de rodamiento de contacto - zapata de rectificado Rodillo de contacto perfilado con goma, D=150 mm Zapata de lijado con amortiguación de aire Potencia del motor 11 kW 3. Unidad de rectificado Unidad de zapata de rectificado, haz de presión de enlace controlado electrónicamente Ancho de elemento 30 mm Sincronización / contrarrotación Velocidad de la banda de lijado infinitamente variable (convertidor de frecuencia) Pantalla digital de la velocidad de la cinta de lijado Potencia del moto ...

Key data: 390 mm, 390 mm

Máquina de moler Löwer Tipo: HBS 400 Año de fabricación: 1999 d.C. Máquina de lijar versátil de una sola cinta para rectificado de adaptación viga glulam pesada y también para calibrar y medir. Ancho de rectificado máximo 390 mm Altura de rectificado máxima: 390 mm 1 zapata de lijado desde arriba Motor de rectificado 7,5 kW Dimensiones de la banda de lijado 300 x 1800 mm Alfombra de transporte para alimentación de materiales Tarifas de alimentación 6/11/16 m/min. Diámetro de conexión de extracción 150 mm Altura constante de la mesa para el uso de transportadores de rodillos Oscilación de la banda abrasiva neumática Sujeción de correa abrasiva neumática Zapata especial HBS para ajustar el rectificado en diferencias de grosor de hasta 4 mm o piezas torcidas Rectificado / calibración de adaptación del selector Ajuste motorizado del espesor de la pi ...

Manufacturer: Unitek, Type: 3N RRT 1100, Monting of the machine: Stahl/Gummi/Schuh, Sanding width mm: 1100, Sanding hight mm: 160, Number of sanding belts: 3, Shore roller 1: Stahl 160 mm, Shore roller 2: Gummi 220 mm, Walze 3 Shorehärte : Schuh 50 mm, Band 1 Leistung kW : ca. 15, Band 1 Schleifbandgeschwindigkeit m/s : 18, Band 2 Leistung kW : ca. 15, Band 2 Schleifbandgeschwindigkeit m/s : 16, Band 3 Kombiaggregat Walze/Schuh: yes, Band 3 Leistung kW : ca. 15, Band 3 Schleifbandgeschwindigkeit m/s : 14, Table hight adjustment by engine: 0,25 kW, Continous adjustable feeding speed m/min: 4-20, Transportbandantrieb kW: 1,5,

Manufacturer: Heesemann, Type: LSM 8, Year: 2003, Control: Steuerung der Anlage Neu, Monting of the machine: Quer / Längs / Bürste / Bürste, Sanding width mm: 1400, Sanding hight mm: 3 - 120, Number of sanding belts: 2, Sanding belt dimensions: 2.620 x 1450, Transverse sanding units: 1, Längsschleifaggregate: 1, Band 1 Leistung kW : 15, Band 1 Schleifbandgeschwindigkeit m/s : 0,5 - 12, Belt 2 shoe unit: yes, Band 2 Schrägstellbar Grad : 15, Band 2 Innenliegendes Drucklamellenband : 0,5 - 12, Band 4 Schleifbandgeschwindigkeit m/s : 16, Belt 4 synchronous and reverse run: 2, Frequency control of belts: 5 - 25, Combi unit roller/shoe: 2,2, Continous adjustable feeding speed m/min: yes, Transportbandantrieb kW: yes, Typ/Stückzahl: 5,5 kW, Vacuum table: 4,0 + 1,5 kW, Brushing unit: 250 + 150 mm, Ionising: 7.600, Year :2003

Manufacturer: Sandingmaster Breitbandschleifmaschine , Type: SA-3202-1100, Year: 1996, Monting of the machine: Walze/Kombi, Sanding width mm: 1100, Sanding hight mm: 140, Number of sanding belts: 2, Sanding belt dimensions: 2150-1150, Werkstückdickenmesseinrichtung mittels Ultraschallsensor : yes, Elektronische Tastung mm: yes, Frequency control of belts: Band 2, Längsschleifaggregate: 2, Rubber roller: yes, Steel roller: Gummi ca.80 shore, Band 1 Leistung kW : ca.10, Belt 1 shoe unit: yes, Band 2 Leistung kW : ca.10, Combi unit roller/shoe: 1, Continous adjustable feeding speed m/min: 8-15, Transportbandantrieb kW: 1,5, Vacuum table: yes, Segment sanding shoe: yes, Weight in kg: 2500, Year :1996

Manufacturer: De Stefani, Type: MVT 3500, Year: 2008, Monting of the machine: 3 X Profilschleifen, Program: yes, Axis control: no, Work piece width min-max mm: 60, Min.-max. workpiece height in mm: 80, Work piece length min-max mm: 250, Sanding hight mm: 80, Schleifaggregate rechts : 3, Abrasive belts at top: 3, Monting of the machine: 3 X Profilschleifen, Chain width mm: yes, Monting of the machine: ca.1,5, Unit 1 tiltable: yes, Aggregat 1 kW: ca.1,5, Unit 2 slewable: yes, Aggregat 2 kW: ca.1,5, Unit 3 slewable: yes, Aggregat 3 kW: ca.1,5, Unit 9 slewable: 3, Shoes electr. controlled: yes, Constant table hight: yes, Machine length: ca.4000, Year :2008

Manufacturer: Costa Kalibrieranlage, Type: KA CC 1350, Year: 2007, Control: Siemens/KEB, Monting of the machine: 2x Stahlwalze geriffelt, Sanding width mm: 1350, Sanding hight mm: 120, Number of sanding belts: 2, Sanding belt dimensions: 2620 X 1380, Table hight adjustment by engine: yes, Steel roller: 2, Längsschleifaggregate: 30, Belt 2 shoe unit: 22, Band 2 Schrägstellbar Grad : no, Band 2 Innenliegendes Drucklamellenband : nur Gegenlauf, Table hight adjustment by engine: yes, Elektronische Tastung mm: 8-20, Separation of sampling in mm: 2,2, Table hight adjustment by engine: variabel, Continous adjustable feeding speed m/min: yes, Constant table hight: no, Brushing unit: yes, Werkstück-Abstrahleinrichtung: 3400, Diameter/ brush bristles: yes, wast cleaning: Pneumatische Absaugvorrichtung dabei, Oszilation dabei, Year :2007

Manufacturer: Heesemann 5 Aggregate, Type: LSM 8, Year: 2005, Control: Heesemann, Monting of the machine: Stahlwalze/Querband/Längsband/Längsband/Längsband/Bürste, Sanding width mm: 1300, Sanding hight mm: 3-80, Number of sanding belts: 5, Sanding belt dimensions: 2620 X 1350, Konstantentisch: yes, Elektronische Tastung mm: yes, Separation of sampling in mm: 32, Frequency control of belts: 2, Transverse sanding units: 1, Längsschleifaggregate: 3, Bürstenaggregate: yes, Steel roller: 1, Bürstenaggregate: yes, Band 1 Leistung kW : 37/Walze, Band 1 Schleifbandgeschwindigkeit m/s : 28, Belt 2 shoe unit: Querschleifaggregat, Band 2 Kombiaggregat Walze/Schuh: zuschaltbare Stahlwalze, Band 2 Leistung kW : 18,5, Band 2 Schleifbandgeschwindigkeit m/s : 0,5-24, Band 3 Leistung kW : 20/24, Band 3 Schleifbandgeschwindigkeit m/s : 10-20, Band 4 Leistung kW : 18,5, Band 4 Schleifbandgeschwin ...

Manufacturer: Heesemann, Type: LSM 8, Year: 1995, Control: Heesemann, Sanding width mm: 1350, Sanding hight mm: 3 - 140, Number of sanding belts: 2, Sanding belt dimensions: 2620 x 1350, Table hight adjustment by engine: no, Band 1 Leistung kW : 11, Band 1 Schleifbandgeschwindigkeit m/s : 0,3 - 12, Band 2 Leistung kW : 11, Band 2 Schleifbandgeschwindigkeit m/s : 0,3 - 12, Frequency control of belts: yes, Table hight adjustment by engine: no, Continous adjustable feeding speed m/min: 8 - 40, Transportbandantrieb kW: 4,0, Intermediate sanding of lacquer: yes, Vacuum table: 5,5, Noise enclosure: yes, Brushing unit: 4,0 + 1,5 kW, Texturing brush diameter: 250, Levelling brush for paint: 150, Weight in kg: 8850, Year :1995

Manufacturer: Heesemann, Type: LSM8 U + LSM8 S, Year: 1997, Control: Heesemann, Monting of the machine: L / L / L , Equipment of machine 2: L / L / L, Double sided sanding line: yes, Sanding width mm: 1350, Sanding hight mm: 3 - 80, Number of sanding belts: 3 + 3 , Sanding belt dimensions: 2620 x 1350, Rollers: 2 + 2, Steel roller: 2 + 2, Band 1 Leistung kW : 45, Band 1 Schleifbandgeschwindigkeit m/s : 24, Band 2 Leistung kW : 37, Band 2 Schleifbandgeschwindigkeit m/s : 24, Band 3 Leistung kW : 13/17, Band 3 Schleifbandgeschwindigkeit m/s : 10/20, Continous adjustable feeding speed m/min: 3 - 15, Transportbandantrieb kW: 4 + 3, Abrasive belts at bottom: 3, Intermediate sanding of lacquer: no, Vacuum table: 15 / 5,5, Noise enclosure: yes, Brushing unit: yes, wast cleaning: 0,75 kW, Weight in kg: 11000+9000, Year :1997

Manufacturer: Heesemann , Type: LSM 8, Year: 1998, Control: Heesemann, Sanding width mm: 1300, Sanding hight mm: 1200, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Konstantentisch: yes, Elektronische Tastung mm: yes, Separation of sampling in mm: 32, Transverse sanding units: 1, Längsschleifaggregate: 2, Band 1 Leistung kW : 13/17, Belt 1 shoe unit: Queraggregat, Band 1 Schleifbandgeschwindigkeit m/s : regelbar, Band 2 Leistung kW : 13/17, Band 2 Schleifbandgeschwindigkeit m/s : regelbar, Band 3 Leistung kW : 13/17, Band 3 Schleifbandgeschwindigkeit m/s : regelbar, Transportbandantrieb kW: ca.4, Intermediate sanding of lacquer: yes, Vacuum table: yes, Segment sanding shoe: yes, Werkstück-Abstrahleinrichtung: yes, Ionising: yes, Year :1998

Manufacturer: Heesemann, Type: MFA 8/Rechtsmaschine, Year: 1996, Monting of the machine: Längs/Bürste, Sanding width mm: 1350, Sanding hight mm: 3 - 140, Number of sanding belts: 1, Sanding belt dimensions: 2620 X 1350, Band 1 Leistung kW : 11, Belt 1 shoe unit: yes, Band 1 Schleifbandgeschwindigkeit m/s : 0,5 - 12, Elektronische Tastung mm: yes, Separation of sampling in mm: 16, Frequency control of belts: 1, Continous adjustable feeding speed m/min: 5 - 25, Transportbandantrieb kW: ca.3, Intermediate sanding of lacquer: yes, Constant table hight: yes, Vacuum table: yes, Segment sanding shoe: yes, Brushing unit: yes, Diameter/ brush bristles: 150, Year :1996

Manufacturer: Delle Vedove, Type: SPL /7/200, Year: 1995, Sanding width mm: ca.10-100, Sanding hight mm: 80, Sanding belts horizontal/bottom: 1, Bandschleifaggregate Stk.: 1, Bürstenaggregate Stck.: 3 links+3 rechts, Right side units Qty.: Band, Unit 1 tiltable: yes, Aggregat 1 kW: ca.1,5, Unit 2 slewable: Bürste, Aggregat 2 kW: ca.1,2, Unit 3 slewable: Bürste, Aggregat 3 kW: ca.1,2, Unit 4 slewable: Bürste, Aggregat 4 kW: ca.1,2, Unit 5 slewable: Bürste, Aggregat 5 kW: ca.1,2, Unit 6 slewable: Bürste, Aggregat 6 kW: ca.1,2, Unit 7 slewable: Bürste, Aggregat 7 kW: ca.1,2, Transport chain mm: yes, Feeding speed min-max m/min: 5-20, Intermediate sanding of lacquer: yes, Constant table hight: yes, Brushing unit: yes, machine ready for demonstration: yes, FREE TEXT: mit automatischer Schleifscheiben Zustellvorrichtung für Schleifscheibenaggregate/inkl Siko Apstapelanlage, Year :199 ...

Manufacturer: DMC Breitbandschleifmaschine, Type: Topsand, Year: 1994, Monting of the machine: Walze/Schuh/Schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Rubber roller: 1, Shore roller 1: ca.85, Längsschleifaggregate: 22,5, Belt 2 shoe unit: 15, Belt 2 synchronous and reverse run: 15, Belt 4 pressure segment belt: no, Combi unit roller/shoe: 8-25, Table hight adjustment by engine: ca.5, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Programmanwahl extern: Struckturbürste von unten, Vacuum table: Bürste, Pressure pads for short workpieces: 180, Segment sanding shoe: von Unten, Year :1994

Manufacturer: Heesemann, Type: LSM 8, Year: 1995, Monting of the machine: Quer/Längs/Längs/Längs/EA , Sanding width mm: 1300, Sanding hight mm: 150, Number of sanding belts: 3, Sanding belt dimensions: 5400 X 150/2620 X 1350, Belt 1Transverse sanding unit: yes, Band 1 Leistung kW : 13/17, Belt 2 shoe unit: yes, Band 2 Leistung kW : 13/17, Band 3 Kombiaggregat Walze/Schuh: Schuh, Band 3 Leistung kW : 13/17, Band 4 Kombiaggregat Walze/Schuh: Schuh, Band 4 Leistung kW : 13/17, Elektronische Tastung mm: yes, Separation of sampling in mm: 32, Frequency control of belts: no, Continous adjustable feeding speed m/min: 5-25, Constant table hight: yes, Vacuum table: yes, Brushing unit: yes, wast cleaning: EA 2, Year :1995

Manufacturer: Tagliabue, Type: PS 40 60, Year: 2001, Control: Siemens, Control: Siemens, Work piece width min-max mm: 20-350, Min.-max. workpiece height in mm: 10-60, Work piece length min-max mm: 450, Sanding hight mm: 60, Schleifaggregate links : 3, Schleifaggregate rechts : 3, Transverse sanding units: no, Profile sanding units: 3, Unit 1 tiltable: yes, Aggregat 1 kW: ca.1,2, Unit 2 slewable: yes, Aggregat 2 kW: 1,2, Unit 3 slewable: yes, Aggregat 3 kW: ca.1,2, Unit 4 slewable: yes, Aggregat 4 kW: ca 1,2, Unit 5 slewable: yes, Aggregat 5 kW: ca.1,2, Unit 6 slewable: yes, Aggregat 6 kW: 1,2, Number of frequency controlt belts: 5, Sanding belt speeds m/min: 5-15, Intermediate sanding of lacquer: yes, Shoes electr. controlled: yes, Constant table hight: yes, Brushing unit: 2, FREE TEXT: Maschinenbett rechts verfährt auf breite der Werkstücke, Year :2001

Manufacturer: Heesemann, Type: LSM 8, Year: 2016, Control: PC 10,4 , Monting of the machine: Walze / Walze, Sanding width mm: 1350, Sanding hight mm: 0,5 - 100, Number of sanding belts: 2, Sanding belt dimensions: 2620 x 1350, Table hight adjustment by engine: no, Steel roller: 2, Band 1 Leistung kW : 45, Band 1 Schleifbandgeschwindigkeit m/s : 0,1 - 24, Band 2 Leistung kW : 37, Band 2 Schleifbandgeschwindigkeit m/s : 0,1 - 24, Belt 2 synchronous and reverse run: yes, Frequency control of belts: 2, Table hight adjustment by engine: no, Continous adjustable feeding speed m/min: 5 - 25, Vacuum table: yes, Brushing unit: 1,5 kW, Year :2016