300 DMG MORI вживана машина для продажу

GeneralVertical Machining Centre; Control: 3D control Heidenhain iTNC 530 Technical DataFeed rate longitudinal/transverse/vertical1-90000/1-90000/1-90000 mm/minRapid traverse longitudinal/transverse/vertical90/90/90 m/minWorking area 1Longitudinal885 mmCross600 mmVertical600 mmMiscellaneousClamping SystemHSK-A 63 Colour Floor space/WeightDimensions (L x W x H)4,9 x 4,3 x 3,2 mWeight approx.12000 KgCabineFull protection cabin DMC 75 V linear in 5-axes-versionAdditional price DMC 75V linear in 5-axes-version - motion in X=885mm und Z=600mm - spindle speed up to 18.000rpm, - tool-taper HSK-A 63, - swiveling range B-axis +10° to -110°, - swiveling speed B-axis 50rpm, - max. torque 750Nm / 553ft/lbs - clampi Tool magazine 150 pocketsTool magazine 150 pockets Tower type magazine Only available for HSK Tool holders. (differently from standard) Number of tools 150 Preparation measuring probe T ...

GeneralVertical-Machining centre Stealth Design; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical1-42000/1-42000/1-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minWorking area 1Longitudinal1450 mmCross700 mmVertical550 mmIntegrated motor spindle speedMASTER®Integrated motor spindle speedMASTER® At speeds > 18.000 min-1, the use of tools with dual contact system (BIG-PLUS®) is stipulated. Drive power (100% DC) 25 kWDrive power (40% DC) 35 kWTorque (100% DC) 86 NmTorque (40% DC) 130 NmSpeed range - 20000 rpmSpindle taper SK40 Tool holder DIN ISO 7388-1-A Clamping System DIN ISO 7388-3-AD TableTable surface 1760 x 750 mmMaximum load (table centre) 1500 KgSlot width 14 mmNumber of Slots 7 Distance between T-Slots 100 mmCabin roofCabin roof In sheet steel design Open and close via front door Special equipmentClampin ...

Точковий центр фрезерування Виробник: DMG Mori Тип NLX 2500/700 Рік будівництва 2023 Керування M730UM Mitsubishi з Celo Довжина повороту 700 мм 12 інструментальних станцій, усі 12 з яких керуються Вісь Y Бар'єрний прохід 91 мм Програмний час виконання Head1 5000h Час роботи машини приблизно 11 000 годин Магазин із стрижним заряджанням TOP Automazioni 3m Включно з комплектом інструментів NP 64 000 євро Машина перебуває у TOP стан�

This 4-axis DMG MORI NHX5000 horizontal machining centre was manufactured in 2014. It features a travel of 730 mm in both the X and Y axes, and 880 mm in the Z axis. The machine has a maximum spindle speed of 12,000 rpm and can handle workpieces weighing up to 500 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI NHX5000 machine we have for sale. Contact us for further details.

This 3-axis DMG MORI NLX1500MC/500 was manufactured in 2015. It features a spindle output of 11/7.5 kW and a maximum spindle speed of 6,000 min-1. The machine is equipped with a 12-station turret and a high-pressure coolant system. If you are looking to get high-quality turning capabilities, consider the DMG MORI NLX1500MC/500 horizontal turning machine we have for sale. Contact us for further details.

Die Maschine ist ausgestattet mit einer Gegenspindel (bestückt mit einem Dreibackenfutter SMW AUTOBLOK, Durchmesser: 210 mm) sowie einem 12-fachen Werkzeugrevolver, inkl. angetriebene Werkzeugstationen, sowie einem SMW AUTOBLOK Dreibackenfutter, Durchmesser: 250 mm, außerdem Späneförderer, Filterabsaugung, Dokumentationen und CDs. Zusätzliche technische Daten: • Bettneigung: 45° • Bettdurchmesser: 700 mm • max. Schlittendurchmesser V1 bis V3: 500 mm • im vorderen Werkstückdurchmesser: 320 mm • Spitzenlänge: 1450 mm • Verfahrweg Z3-Achse: 1200 mm • Spindelhöhe Achse zu Boden: 1043 mm • Zugstangendurchmesser: 81 mm • Vorderlagerdurchmesser: 130 mm • Auflösungsachse C1: 0,001° • max. Gewicht zwischen Spitzen: 500 kg • Abstand zwischen zwei Spindelnasen: 1495 mm • Z1 Achsen Verfahrweg: 1200 mm • max. Werkstücklänge: 1140 mm • max. Werkstückdurchme ...

Die Maschine ist ausgestattet mit einem Reitstock sowie einem 12-fachen Werkzeugrevolver, inkl. den in dem Wechsler befindlichen Werkzeugaufnahmen, außerdem ein Dreibackenfutter SMW AUTOBLOK, Durchmesser: 300 mm, inkl. Späneförderer, Filterabsaugung und Dokumentationen. Zusätzliche technische Daten: • Frequenz: 50/60 Hz • Durchmesser im vorderen Lager: 140 mm • Vorschub Antrieb in X und Z-Achse: 40 x 10 mm • Vorschubkräfte X/Z: 7,5 kN • Y-Achse Vorschubkraft: 7000 N • Eilgang C1-Achse: 100 m/min • Wegmesssystem X/Y/Z: absolut rotierend • Positionierunsicherheit X: 0,008 mm • Positionierunsicherheit Z: 0,010 mm • Arbeitsbereich Achsabstand: 1150 mm • Schwenkbereich über X Schlitten: 465 mm • Schwenkbereich über Bett: max. 680 mm

Die Maschine ist ausgestattet mit einem Reitstock sowie einem Dreibackenfutter, Durchmesser: 250 mm sowie Späneförderer und Kühlmittelanlage. Achtung: die Spindelstunden können sich noch geringfügig erhöhen! Zusätzliche technische Daten: • Nennstrom: 125 A • Spindelabstand: 1020 mm • max. Werkstückgewicht Spannfutterteile/Spannfuttergewicht: 100 kg • max. Werkstückschwerpunkt vom Spindelflansch: 120 mm • Verfahrweg X1: von -10 bis 490 mm • Verfahrweg Y1: +-100 mm • Verfahrweg Z2: 600 mm • Verfahrweg Z3: 800 mm • Durchmesser Spindelflansch: 220 H 5 mm • Durchmesser des vorderen Lager: 160 mm • Schlitten Eilgangsgeschwindigkeit Z-Achse: 40 m/min • Wegauflösung Z-Achse: 0,001 mmm • B-Achse max. Schwenkdrehzahl: 70 U/min • Winkelauflösung: 0,001° • Pinolenkraft: 8 kN

DMG MORI DMC 850 VYear of manuf. : 2018 Control : Siemens 840 Dsl - Celos Speed : 20000 rpmMovement X/Y/Z : 850/520/475 mmTool holder : HSK 63 ____________Description:In General:Year of manufacture:2018Control system:Siemens 840 Dsl – OperateTravel ranges X/Y/Z:850/520/475 mmSpeed:20,000 rpmTool holder:HSK 63Spindle:Technology:Motorised spindleSpeed:20,000 rpmMax. power:35 kWMax. torque:130 NmTool holder:HSK 63Fluid supply:Coolant + blast airWorking table:Clamping area:1,160 x 570 mmMax. table load:1,000 kgTool magazin:Technology:Chain magazineNumber of stations:60Tool changer:Double gripperMax. tool diameter:80 (130) mmMax. tool length:300 mmEquipment:Positioning sensors:Direct scalesChip removal:Chip conveyorCoolant supply:Internal coolant system, 20 barWorkpiece measurement:Renishaw Touch probeTool measurement:Tool setterEmulsion mist separator:MechanicalTool coding:Balluf sen ...

Рік будівництва: 2019 Контролер ЧПУ: FS-31iB (MAPPS IVB) Осири Хід осі X мм: 1540 Хід осі Y мм: 760 Хід осі Z мм: 660 Швидкий хід м/хв: 20 Робочий стіл Розміри таблиці мм: 1700x760 Максимальна вага заготовки кг: 2000 Веретено Швидкість обертання шпинделя: 20000 Потужність приводу шпинделя кВт: 18,5/15/11 (10 хв/30 хв/безперерво) Крутний момент шпинделя Nm: 81 (10% ED) Охолодження Охолодження через центральний шпиндель: 70 Система інструментів Тримач інструменту: BT 40 Слоти магазину інструментів: 60 З вільними сусідніми місця� ...

GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.14500 KgDirect measuring systemDirect path measuring systemCabineFull protection cabinPackage Mill / Turn HSK-A 63Package Milling / Turning: Upgrade NC-swivel rotary table to Milling - Turning / direct drive Table plate C-axis d 680 mm / 26.8 in Speed C-axis 1.000 min-1 Integrated balancing sensor Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20 ...

GeneralUniversal Milling Machines; Control: DMG MORI SLIMline® Multi-Touch control Working area 1Longitudinal500 mmCross450 mmVertical400 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightDimensions (L x W x H)3,15 x 2,86 x 2,71 (4,82 x 4,16 x 2,71) mWeight approx.5000 KgSwivel Rotary Table Powered B/C AxesSwivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only!Type of Measuring system Direct measuring systemMode for positioning only5. Axes (swivelling range) -5/+110 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeDistance between T-Slots 63 mmNumber of Slots 7Slot width 14 mmMaximum load (table centre) 200 KgTable surface Ø 630 x 500 mmDirect measuring system ...

GeneralUniversal Milling Machines; Control: 3D-control Heidenhain TNC 620 Working area 1Longitudinal500 mmCross450 mmVertical400 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightDimensions (L x W x H)3,15 x 2,86 x 2,71 (4,14 x 4,16 x 2,71) mWeight approx.5000 KgSwivel Rotary Table Powered B/C AxesSwivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only!Type of Measuring system Direct measuring systemMode for positioning only5. Axes (swivelling range) -5/+110 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeDistance between T-Slots 63 mmNumber of Slots 7Slot width 14 mmMaximum load (table centre) 200 KgTable surface Ø 630 x 500 mmDirect measuring system X,Y,ZDire ...

GeneralUniversal Milling Machines; Control: 3D-control Heidenhain TNC 620 Working area 1Longitudinal500 mmCross450 mmVertical400 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightDimensions (L x W x H)3,15 x 2,86 x 2,71 (4,14 x 3,56 x 2,71) mWeight approx.5000 KgSwivel Rotary Table Powered B/C AxesSwivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only!Type of Measuring system Direct measuring systemMode for positioning only5. Axes (swivelling range) -5/+110 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeDistance between T-Slots 63 mmNumber of Slots 7Slot width 14 mmMaximum load (table centre) 200 KgTable surface Ø 630 x 500 mmDirect measuring system X,Y,ZDire ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsTorque (100% DC)43 NmMax. torque64 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.10000 rpmWeight approx.5600 KgSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Air coolant external and internalAir coolant ex ...

CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgGeneralVertical Machining Center; Control: Control SIEMENS 828D Mechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Air coolant external and internalAir coolant external and internal (through spindle centre) switchable via M-FunctionElectronic HandwheelExternal electronic Handwheel

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgGeneralVertical Machining Center; Control: Control SIEMENS 828D Mechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmSpeed max.12000 rpmDrive power (100% DC)9 kWDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)Tool Clamping BT 40Tool Clamping BT 40 for pull-studs DIN 69872 (differently from standard)Electronic HandwheelExternal electronic Handwheel

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsSpeed max.12000 rpmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperBT 40 Tool Magazine with24 PositionsTorque (100% DC)57 NmMax. torque83 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWTable surface850 x 650 mmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)Tool Clamping BT 40Tool Clamping BT 40 for pull-studs DIN 69872 (differently from standard)Electronic HandwheelExternal electronic Handwheel

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface1400 x 600 mmDimensions (L x W x H)2,74 x 2,74 x 2,86 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z1100/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.6950 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel