饮料机 二手 出售 (2,168)

Krones 用于玻璃装啤酒的二手装瓶线 60,000 BPH 环境规格与性能数据 该装瓶线专为玻璃容器中高速啤酒生产设计，适用于� ��手工业包装应用。该产品线集成了洗涤、检查、填� �、封盖、巴氏杀菌、包装箱、托盘化和输送带搬运， 实现了高效的饮料生产。生产速度：每小时60,000瓶 容器类型：琥珀色玻璃啤酒瓶 瓶装容量：0.45升（名义）;满溢 0.464 升 ± 4 毫升 注油高度：距顶部边缘 45 毫米 �

二手Sidel无精灌装线48000 BPH - 2020年技术规格与性能数据 该装瓶线采用Sidel PET无菌吹气-填充-盖组合配置，专为高速饮料生产设� �。该产品专为干式无菌应用设计，能在对敏感产品保 持全过程卫生完整性的同时，提供稳定的性能。制造� ��：Sidel线型：PET无菌，吹气-填充-盖组合，生产速度� ��48,000 bph 当前产品：PET瓶装水、牛奶 应用：干式无菌;适合装牛奶、果汁和水，瓶装可�

技术规格与性能数据 这条完整的PET热装瓶系列是为果汁应用设计的高效二� ��装瓶产品线。该厂主要建于2010年，下游设备自2011年 起配备，稳定产能达到每小时24,000瓶（bph）。该产品� ��整合吹气、热灌装、封盖、标签、二次包装和托盘� �，为饮料生产和工业包装需求提供统一解决方案。生 产速度：24,000 bph 主要应用：热灌果汁 容器处理：PET瓶 验证格式示例�

使用完整CSD罐装线 2018年 - 18,000 bph技术规格与性能数据 该完整CSD罐装线是二手装瓶线，专为铝罐配置，设计� ��可靠的饮料生产。该系列由中辰制造，旨在为工业� �装规模的碳酸软饮料提供稳定的质量。它配备了从混 合到下游包裹的全面设备，实现顺畅、连续的运行。� ��产速度：18,000 每小时 集装箱类型：铝罐 可用容量范围：0.33L 产品：CSD

二手Mesal搅拌机10000lt - 2011年技术规格与性能数据 这款预混混合器专为需要精准糖浆混合、水混合和可� ��碳酸化的饮料生产环境设计。该装置由MESAL于2011年� �造，结合了自动化过程控制与可靠的结构，确保在工 业包装和二手装瓶线应用中取得稳定效果。它支持冷� ��行，高效吸收二氧化碳，并提供稳定的碳酸，适合� �酸软饮料的制作和调味饮料。制造商：MESAL 模型：WPM

阿尔法拉瓦尔巴氏杀菌机——概述 这款二手阿尔法拉瓦尔巴氏杀菌机设计用于乳制品液� ��的持续热处理，确保产品安全和下游加工和包装的� �定质量。由阿尔法拉瓦尔工程制造，它为饮料生产和 乳制品运营提供可靠的性能，适合二手装瓶线或工业� ��装环境。其产能范围为3,000至5,000升/小时，非常适合 中规模生产用于奶酪、酸奶、酸奶油�

乳制品加工与灌装线，日产量不超过20,000升。该处理� ��高效管理每日15,000至20,000升牛奶的体积。因此，它� �保了高效率和最高品质的成品。因此，其产能实现了 高日产量回报率，这对大规模运营至关重要。包装能� �� 此外，该系列的专业包装系统能够熟练地处理各种乳� ��品。例如，工人以每小时2400个牛奶的速度，用1.0升P VC袋包装牛奶。此外，他们还会打�

食用油装瓶管 6000 bph 装瓶管线一般配置 6000 bph 食用油装瓶管线 1升PET瓶中加工食用油，标称速度为每小时6000瓶。该� �置包含多家制造商的设备，集成以确保在填充、标签 、包装和托盘装卸过程中的连续运行和可靠性。运营� ��于2022年12月正确关闭了整个系统。目前，这些机器� �被拆解并存放在合适的条件下。因此，这条线立即�

二手流式巴氏杀菌机配2000 L/h分离器 结构与工作原理 带2000 L/h分离器的二手流式巴氏杀菌机作为连续流巴氏杀菌� ��，配备板式热交换器，专为牛奶和奶油的热处理设� �。该系统采用板式热交换器，确保高效的热传递，实 现产品的快速加热和制冷。因此，它在最大化能源效� ��的同时，保持了产品质量。此外，连续运行可稳定� �出每小时2000升的吞吐量。因此，该模型适合中等比�

小型乳制品二手加工线 2000升/小时 牛奶接收与初始储存 小型乳制品二手加工线 2000 L/h 从一个牛奶接收单元开始，该单元由两个乳酸冷冻罐� ��一个接收泵组成。最初，操作员将生乳引入罐中，� �持冷藏状态。因此，系统在加工前确保热稳定性。此 外，这种设置最大限度地减少了细菌负荷，同时允许� ��续转移到巴氏杀菌阶段。巴氏杀菌与分离 接下来，巴氏杀菌阶段使用板式换热�

执行： 最大压力：10 bar 蜡烛数量：24根 身高：30英寸 适配器：7（代码：25） 垫圈：硅胶 清空：无 通风量：TC 1.5” 表面：机械抛光 输入/输出连接：DIN 11851 公头 DN80

Overview: Manufactured in 2004 by the German company Dr. Datz Maschinenbau GmbH, this reliable 24-head wire bail capper is designed for securely sealing wire bail closures on bottles. A high-quality German-built machine, ideal for efficient and precise capping operations in bottling lines. Technical Details: Manufacturer: Dr. Datz Maschinenbau GmbH Type: BVM 24R Year of Manufacture: 2004 Number of Capping Stations: 24 Closure Type: Wire bail closures Machine Direction: Left to right

Overview  This vacuum evaporator was manufactured in 2018 by Italian manufacturer REDA. The machine is designed for gentle concentration of musts, juices, and other liquid products at low temperatures to preserve aromas and product quality. It is almost new and offered for sale as it was intended for a project that did not proceed. The system features an automated, CIP‑ready design. Technical data  Capacity: 100 L/h evaporation capacity at +22/+24 °C Application: Concentration of musts, juices, and liquid products Operating modes: Recirculation mode or direct concentration mode Max. concentration: 55–70 °Brix Daily output: 2,400 L evaporated / 24,000 L enriched to 10% Utilities: Electrical supply: 25 kW, 380 V / 3Ph / 50 Hz + PE Water: +12/+18 °C (low consumption) Compressed air: 6–8 bar Connections: DN40 DIN, 50 mm hoses Control system: PLC automation, IP65 control cabinet, d ...

Overview The shrink packer CERMEX CP18 CAE was manufactured in 2019 by the French company CERMEX. This is a shrinkwrapper with accompanying sealing bar. The machine has run only 1,100 hours and is immediately available, as the production in the factory was stopped in 2022. Truck loading is included. Technical data Capacity: Up to 40 ppm (packs per minute) Formats: 75cl – 3x2 Dimensions: L. 623 cm × W. 250 cm × H. 210 cm Working table height: Adjustable from 0.9 m to 0.95 m Electrical power: 30 kW

Overview  This complete filling line for returnable glass bottles was manufactured in 2012 by leading European producers Krones, Sidel, and Kettner. The line is designed for high-capacity beverage production, handling up to 42,000 bottles per hour in 0.33 L contour bottle format. It includes all necessary components from depalletizing to final palletizing and labelling, making it a complete turnkey system for bottling operations. The line underwent annual maintenance in August 2025 and was stopped on September 1st, 2025. It remains installed and connected, and can be inspected upon request. Technical data  Capacity: 42,000 bph Formats: 0.33 L contour bottle Application: Beer, CSD, or other beverages in returnable glass bottles Line length: Approx. 103 × 29 m Condition: Excellent; maintained until shutdown (September 2025) Availability: Immediate Status: Still installed and connected S ...

Overview  This packaging machine was manufactured in 2006 by the German company Krones. The machine is designed for wraparound cartons, with the blank fed from above, bottles grouped in sixes, and sealed from below with hot glue. The machine has a full stainless-steel construction, only 1,677 operating hours and is immediately available. Technical data  Capacity: 30,000 bottles/h (0.33 L, 6-packs) Formats: Closed 6-packs, bottle Ø 61.5 mm, height 217 mm Formation of packs: 2×3 (six-pack wraparound) Operating hours: 1,677 Construction: Full stainless steel Glue type: Hotmelt Scope of Delivery  Wraparound packer | Krones | Solidpac | 2006 Infeed conveyors for bottle supply and dividing system  

Overview The swing-top closing machine was manufactured by the Austrian manufacturer AMS in 2005. As the current owner has decided not to use swing-top closures anymore, this machine is for sale. Currently the machine is still installed in a brewery. Documentation is available. Tech Specs: Capacity: 12,000 bph Control: Siemens S7 Formats: 0,3 l 0,5 l Number of closing positions: 16 Documentation available

Overview  The machine was built in 2018 by the german manufacturer KRONES and is designed for high-speed wrap-around labeling from the reel. This machine is ideal for bottling lines requiring flexibility across various labeling technologies. The machine was taken from a production line and is fully functional. It is available for inspection and can be disassembled, packed and shipped on request. Technical data  year of manufacture: 2018 Capacity: approx. 20,000 /h Bottle Formats: 0.5 L, 1.5 L PET  Worked Labels: IN REEL Reel Change: Automated Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Protection Class: IP 54 (main panel and motors) Modular Design (Plug & Play): Features automatic docking stations allowing quick and toolless changeovers between different labeling methods (e.g., hot melt, cold glue, self-adhesive, wrap-around) Versatility: Capable of han ...

Overview  This empty bottle inspection machine was manufactured in 2012 by German company HEUFT. The Glas InLine reflexx IR is designed for quality control of empty glass bottles in high-speed filling lines. The machine is still installed with energy disconnected, stopped since September 2025, and can be visited on request. It is described as in very good condition and available immediately. Technical data  Capacity: Up to 72,000 bph Formats: 330 ml Application: Empty glass bottle inspection Flow direction: Left to right Operating hours: 48,121 h

Overview  This fill level inspection machine was manufactured in 2017 and the label inspection machine in 2015 by German company Vision-Tec. The pusher was made by German company BBULL. It is designed for checking the fill height, closure and label of full bottles. The machine is until October 2025 in running production. Technical data Capacity: Adjustable Scope of Delivery  Fill level inspection system | Vision Tec | 2017 Label inspection system | Vision Tec | 2015 Reject system | BBULL

Overview This PET filling line was manufactured in 2002 by Krones (Germany). The line is designed for carbonated beverages such as beer or lemonades, and also suitable for water with or without CO₂. With an output capacity of up to 12,000 bph (0.5 L), it offers a complete solution from bottle blowing to palletizing. The line is being sold due to modernization of the PET division and replacement with a higher-capacity system. Equipment is in good condition and still fully operational. Technical data  Line capacity: 12,000 bph at 0.5 L 9,000 bph at 1.0 L 8,000 bph at 1.5 L 6,000 bph at 2.0 L Formats: 0.5 L, 1.0 L, 1.5 L, 2.0 L Neck finish: PCO 1810 Max. bottle diameter: 106 mm Products: Beer (+4 °C), Kvass and lemonades (+10 °C), still and carbonated water Labelling: Wrap-around, pre-cut paper labels, hot-melt Secondary packaging: Film only (4×3 and 3×2) PLC: Siemens S7-300 Power su ...

Overview  The ALWID-KRONE-HV is a semi-automatic filling machine working with high vacuum. This model is suitable for filling still media into dimensionally stable containers. Many bottle shapes and sizes can be used, no format parts required. The filling level is set directly on the valve, so it remains constant regardless of the bottle volume. Vacuum level adjustable. Technical data  Filling points: 2 Filling valve diameter:  mm Suitable for filling highly viscous media Fields of application: food, beverage, pharmaceutical and chemical industry

Overview  The crate washer was manufactured in 2000 by the German company Bohrer. It is located at a German brewery and was part of a plant that has been shut down as it was replaced by a completely new line. In autumn 2024 the line was stopped and the machine was dismantled and stored.  Technical Details  Capacity: up to 2,000 crates/hour (can be adjusted from 500 - 2,500 crates/hour) Formats: crate of 12 bottles 700ml 356 x 275 x 346 travel direction crosswise crate of 20 bottles 250ml 360 x 275 x 255 travel direction crosswise crate of 20 bottles 500ml 400 x 300 x 290 travel direction crosswise crate of 20 bottles 500ml 400 x 333 x 260 travel direction crosswise Horizontal and vertical spray nozzles Spraying with hot caustic and fresh water Caustic heater with temperature regulation is integrated in the machine Machine is heated by steam Dimensions: Length: 4800mm Width: 900mm Heig ...

Overview This ENOS Millenium self-adhesive labelling machine was manufactured in 2002 and is designed for the application of pressure-sensitive labels on glass bottles, particularly in wine production environments. The machine is equipped with three labelling stations, allowing the application of front, back, and seal labels. With a capacity of approximately 2,500 bottles per hour, the system is suitable for small to medium-sized production lines. The machine supports Bordeaux and Burgundy bottle formats, with corresponding format parts included. Its modular design and self-adhesive technology provide flexibility for different label applications and bottle types. Technical Data Capacity: approx. 2,500 bottles per hour Labelling technology: Pressure-sensitive (self-adhesive) Number of stations: 3 Applications Front label Back label Seal label Bottle Formats Container type: Glass bottles S ...

Overview  This complete glass bottling line was manufactured between 2010 and 2014 by several reputable European manufacturers, including CIMEC (Italy). The main monobloc — a CIMEC 16-16-1 rinsing, filling and crowning unit — was built in 2014 and operated at a natural mineral water facility until July 2025. The line also includes auxiliary equipment such as self-adhesive and wrap-around labellers, a DE filter, and a heat-shrink capsule tunnel, making it a fully functional and compact filling line for glass bottles with crown caps. All equipment remains installed, is in good condition, and can be inspected on site. Technical data  Year of Manufacture: 2010–2014 Application: Water and other beverages Capacity: Approx. 2,000 bph (330 ml) Approx. 1,670 bph (500 ml) Bottle Formats: 250 ml – 1,000 ml (included: 330 ml & 500 ml) Closure Type: 26 mm crown caps Configuration (Monobloc) ...

Overview  The Gruber AFD6 is a filling machine for bottles and party KEGs that was produced by the German manufacturer Gruber in 2018 and has an operating time of 725 hours. The machine is available immediately. Technical details Output 800 bph (at 0.33l) 750 bph (at 0.5l) 600 bph (with 1.0l) 400 bph (for 2.0l) 240 bph (with 5.0l party KEG) Output varies depending on CO2 content and beer temperature (in practice, 1,000 bph could be achieved at 0.33l) Long tube filler with 6 filling points Fully automated filling process Single or double CO2 flushing Siemens S7 control system with touch panel Operating hours: 725 hours

Overview  The atmospheric filler was manufactured in 2016 by the Italian manufacturer GAI and used in a Belgian brewery. Technical details  Capacity: 6,000 bottles/h Formats 330 ml Number of valves: 16

Overview  This cap feeding system consists of a vertical cap elevator, a centrifugal distributor, and a horizontal flat top air conveyor. The system was used for feeding 38 mm flat plastic caps in PET bottling applications. It has been dismantled, stored in a warehouse, and is immediately available. Technical data  Formats: Flat 38 mm plastic caps Dimensions: L 210 cm × W 75 cm × H 300 cm Power supply: 0.2 kW Application: PET bottles Scope of Delivery Vertical cap elevator | Marmoinox | AML-ZVE1 | 2016 Centrifugal distributor | Sacmi | - | 1997 Horizontal flat top air conveyor, 2 m | Sacmi | - | 1997

Overview This HEUFT Spectrum TX empty bottle inspector was manufactured in 2015 and is designed for the automatic quality inspection of empty glass bottles prior to the filling process. The machine belongs to the HEUFT Spectrum TX series, which uses the manufacturer’s reflexx inspection technology for high-precision bottle inspection. The system detects foreign particles, glass defects, and residual liquids inside bottles, ensuring that only compliant containers proceed to the filling stage. HEUFT inspection systems are widely used in modern beverage production lines due to their reliable optical inspection technology and modular design. The machine was installed in a high-capacity bottling line with a performance of approximately 33,000 bottles per hour, making it suitable for large industrial beverage filling operations. Technical Data Manufacturer: HEUFT Series: Spectrum TX Type: HB ...

Overview This premix beverage mixer was manufactured in 1969 by Stork Jansen & Sutorius N.V. The machine is designed for the production of carbonated and non-carbonated soft drinks as well as carbonated water. It is configured as a multi-tank mixing and carbonation system including product tank, vacuum tank and saturator for consistent mixing and CO₂ dosing. The unit has been fully refurbished in 2020, is currently in operation, and available for inspection. Technical data Capacity: approx. 15,000 L/h Application: Beverage mixing (carbonated and non-carbonated soft drinks, carbonated water) Configuration: Multi-tank system (product tank, vacuum tank, saturator) Operating pressure: up to approx. 6 bar (typical 1.2 – 1.4 bar) CO₂ content: approx. 6.5 – 7 g/l Electrical: 380 V, 3-phase Drive power: approx. 5.5 – 7.5 kW Scope of Delivery  Premix beverage mixer | Stork J ...