子类目
(三级类目)
生产厂家:
(品类: 103)
Key data: 600 mm, 400 mm, 400 mm
MAHO MH 600 E 数控铣床——使用，功能正常（仅商业用途） 出售的是一台1989年产的MAHO MH 600 E数控铣床，状态为二手。 机器根据年代久远出现磨损迹象，但基本处于可用状 ，目前仍在运行中，因此可根据安排随时进行检查 演示。 技术数据： 行程：X 600 毫米 / Y 450 毫米 / Z 450 毫米 主轴转速：最大4,000转/分钟 刀具夹具：SK40 状况 / 备注： 机器运行，准备使用。 所有轴都可以移动 控制系统功能 Z轴在过程中可以清晰听到（根据装配师的说法，这在 这种类型中并不罕见） Z轴的滑动离合器油腻，需在机上更换 注： 仅售予技工 不包含任何保证和保证 不退货 该机器可随时预约查看和测试
This 3-axis STAMA MC 546/S was manufactured in 2000. It features a powerful main spindle motor with a maximum speed of 8,000 RPM and a torque of 180 Nm. The machine is equipped with Siemens control and motors for precise operation. If you are looking to get high-quality machining capabilities, consider the STAMA MC 546/S vertical machining centre we have for sale. Contact us for further details.
This 3-axis WEMAS VZ 750 was manufactured in 2006. It features a HEIDENHAIN control unit with an iTNC 530 style interface, a T-slotted work table equipped with dual manual/hydraulic vises, and a mechanical spindle interface with coolant nozzles. If you are looking to get high-quality vertical machining capabilities, consider the WEMAS VZ 750 vertical machining centre we have for sale. Contact us for further details.
This 3-axis HERMLE C 600 V was manufactured in 1998. It features an X-axis travel of 600 mm, Y-axis travel of 450 mm, and Z-axis travel of 450 mm. The machine is equipped with a tool magazine that holds 30 slots and an internal coolant supply of 10 bar. If you are looking to get high-quality machining capabilities, consider the HERMLE C 600 V vertical machining centre we have for sale. Contact us for further details.
These 4-axis Starrag Heckert HEC 500 H/V were manufactured in 2008 and 2009. They features a swivelling head configuration, with an X-axis travel of 800 mm, Y-axis travel of 800 mm, and Z-axis travel of 680 mm. The second machine features a swivelling head configuration, with an X-axis travel of 800 mm, Y-axis travel of 650 mm, and Z-axis travel of 680 mm. The machines include a pallet size of 500 x 500 mm and a maximum load per pallet of 1000 kg. If you are looking to get high-quality machining capabilities, consider these Starrag Heckert HEC 500 H/V horizontal machining centres we have for sale. Contact us for further details.
This 5-axis DMG MORI DMU 75 MonoBlock was manufactured in 2015. It features an X-axis travel of 750 mm, Y-axis travel of 650 mm, and Z-axis travel of 560 mm. The machine is equipped with a spindle speed of 20,000 rpm and a tool magazine with 60 positions. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 75 MonoBlock universal machining centre we have for sale. Contact us for further details.
This 4-axis DECKEL MAHO DMC 70 H duoblock was manufactured in 2007. It features a Siemens 840D control unit and a robust tool holder type of SK40. The machine is equipped with hydraulically clamped clamping towers, ensuring secure workpiece handling. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 70 H duoblock horizontal machining centre we have for sale. Contact us for further details.
通用铣床 MIKRON WF3DCM/155 海登海因 TNC 155 内部机器编号。58 旅行： X轴：500毫米 纵轴：500毫米 Z轴：350毫米 桌面面积：800 x 450 毫米 安装座：SK 40 DIN ISO 机车重量：约2.3
This 5-axis Mazak V515/40N was manufactured in 2006. It features a maximum workpiece dimension of 1,300 mm x 550 mm x 680 mm and a robust table size of 1,300 mm x 550 mm with a maximum table load of 1,500 kg. The machine offers a rapid traverse rate of 26 m/min in X/Y and 20 m/min in Z. If you are looking to get high-quality milling capabilities, consider the Mazak V515/40N vertical machining centre. Contact us for further details.
This 5-axis DECKEL MAHO DMU 80P hi-dyn was manufactured in 2005. It features impressive travels of 800 mm in X, 700 mm in Y, and 600 mm in Z. The machine is equipped with a Heidenhain iTNC 530 control and a maximum spindle speed of 6,300 rpm. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 80P hi-dyn universal machining centre we have for sale. Contact us for further details.
This 3-axis Hurco VMX 42 vertical machining centre was manufactured in 2004. It features a table clamping surface of 1270 x 610 mm and travels of 1060 mm in the X-axis and 610 mm in both Y and Z axes. The machine has a maximum table load of 1100 kg and a spindle speed range of 10 - 10,000 RPM. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 42 machine we have for sale. Contact us for further details.
Three old Hermle and Deckel milling machines are available. 1) Horizontal milling machine Hermle FW 801, tool holder: SK40, travel X/Y/Z: 430mm/150mm/420mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2250mm/1700mm/1500mm, weight: approx. 1000kg. 2) Universal milling machine Hermle FW 710, tool holder: SK30, table dimensions X/Y: 710mm/190mm, travel X/Y/Z: 400mm/150mm/350mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 700kg. 3) Deckel FP 2, year of manufacture: 1987, tool holder: SK40, travel X/Y/Z: 300mm/2200mm/400mm, table dimensions X/Y: 620mm/390mm, max. table load: 250kg, speed: 3150rpm, feed: 3600mm/min, rapid traverse: 4000mm/min, machine dimensions X/Y/Z: approx. 2500mm/2100mm/1800mm, weight: approx. 1250kg, control: Heidenhain TNC 355. An on-site inspection is possible. Individual sale possible, however a package sale is preferre ...
Brother Speedio S700X2Year of manuf. : 2022 Control : Sonstige Brother C00 Speed : 10000 rpmMovement X/Y/Z : 700/400/300 mmTool holder : BBT 30 ____________Description:Mainspindle:Technology:DirectdriveSpeed:10.000 rpmPower (max.):26,2 kWTorque (max.):92 NmTaper:BBT 30Workingtable:Clampingsurface:800 x 400 mmTableloading (max.):250 kgIn general:Toolmagazine:21 StationsRapid travers in X/Y/Z:50/50/56 m/minEquipment/Accessory:Chipmanagement:Chip coveyorCoolingmanagement:Minimumlubrication (IKZ), Company Lubrix V54.-Axis:Lehmann EA-510 with CounterbearingWorkpiececlamping:Hydrulic, 80-210 barContactcontrol:PneumaticAutomationinterface I:Automatic Door (electrical)Automationinterface I:RobotinterfaceOilmistseparation:Mechanical extraction, company Sara UC1 SDColumnextention:150 mmSetup operations:Electronic HandwheelFurther Equipment:Trafo
Litz LU 400Year of manuf. : 2016 Control : Heidenhain TNC 640 Speed : 12000 rpmMovement X/Y/Z : 400/350/350 mm____________Description:Spindle:Technology:DirectdriveSpeed:12.000 rpmPower (max.):13 kWTorque (max.):95 NmTaper:SK40NC-Swivelroundtable:B-Axis:-50°/+110°C-Axis:360°Clampin gsurface:ø450 mmTableloading (max.):200 kgIn general:Toolmagazine:48 StationsRapid travers in X/Y/Z:48 m/minEquipment/Accessory:Positionsensor:Direct Scales in X/Y/ZChipmanagement:Chip conveyorCoolingmanagement:Internal cooling unit with filter and High-pressure, 30 barWorkpiecemeasurement:Touch probe, Heidenhain TS740Toolmeasurement:Laser, Renishaw NC4 TXSetup operations:Electronic HandwheelFurther Equipment:SpindlechillerFurther Accessory:Misc. used Toolholder
Exeron HSC 600Year of manuf. : 2020 Control : Heidenhain TNC640 Speed : 42000 rpmMovement X/Y/Z : 650/550/400 mmTool holder : HSK-E40 ____________Description:Spindle:Technology:MotorspindleSpeed:42.000 rpmPower (max.):13,5 kWTaper:HSK-E40Workingtable:Clampingsurface:530 x 900 mmTableloading (max.):600 kgIn general:Toolmagazine:60 StationsRapid travers in X/Y/Z:50 m/minEquipment/Accessory:Positionsensor:Direct scales in X/Y/ZChipmanagement:ChiptrayCoolingmanagement:MinimumlubricationWorkpi ecemeasurement:Touch probe, Renishaw OMP 400Toolmeasurement:Laser, BLUMSetup operations:Electronic handwheelFurther Equipment:Spindlechiller
Matec 30 HVKYear of manuf. : 2012 Control : Siemens 840 D Speed : 12000 rpmMovement X/Y/Z : 1300/600/800 mmTool holder : HSK 63 ____________Description:In General:Year of manufacture:2012Control system:Siemens 840 DTraverse X/Y/Z:1,300/600/800 mmSpindle speed:12,000 rpmSpindle:Technology:Direct drive spindleSpeed:12,000 rpmPower:30 kWTorque:191 NmTool holder:HSK 63NC swivel head:B-axis:+/- 105°Clamping torque:4,200 NmNC rotary table:C-axis:360 °Drive:Direct drive (torque)Clamping surface:630 mmTorque:600 NmMax. table load:1,000 kgTool magazine:Technology:Chain magazineTool changer:Double gripperNumber of stations:48Tool diameter max.:70 (130) mmTool length max.:340 mmEquipment:Position sensors:Direct scalesChip disposal:Chip conveyorCoolant supply:Internal coolant system, 40 barWorkpiece measurement:Renishaw Touch probeTool measurement:Blum LaserEmulsion mist separator:LTA, elect ...
Urban AP-B 4000 ProfilbearbeitungszentrumYear of manuf. : 2016 Control : Heidenhain TNC620 Movement X/Y/Z : 4100/420/300 mmTool holder : SK40 ____________Description:In general:Model:AP-B 4000 Automatic Profile Machining CenterMachining length:4,000 mmTravel ranges X/Y/Z:4,100 / 420 / 300 mmMachine cover:Pneumatically operated, opens upwardControls:Operator terminal can move along the machineControl:Heidenhain TNC 620 CNC controlAdditional control:Heidenhain HR130 handwheelTable specifications:Size 16 T-slots, mounted longitudinally to the X-axisWorking surface:4,200 x 420 mmSpindle:Motor power:14 kW S1 / 19 kW S6Motor cooling:Water with additiveSpeed range:100 to 14,000 rpmTorque:74 Nm S1 / 100 Nm S6Drilling capacity in St 60/aluminum:25 mm/30 mmThread size in St 60/aluminum:M20/M30Tool magazine:Tool holder:SK 40Tool clamping system:Spring-loaded clamping system with 9 kN clamping ...
Belotti FLU 2617Year of manuf. : 2023 Control : Siemens 840Dsl Speed : 24000 rpmMovement X/Y/Z : 2600/1700/950 mmTool holder : HSK-A63 ____________Description:Spindle:Technology:Swivelhead with MotospindleSpeed:24.000 rpmPower (max.):15 kWTorque (max.):14,3 NmTaper:HSK-A63A-Axis:+/- 120°C-Axis:270°In general:Toolmagazine:18 stationsClampingsurface:2.350 x 1.700 mmRapid travers in X/Y/Z:80/80/60 m/minEquipment/Accessory:Workpiecemeasurement:Touch probe, m&h RWP 20.50Toolmeasurement:Laser, HexagonToolbreakagecontrol:Probe, m&h TS 35.20Setup operations:Electronic Handwheel3D-Extruder:CEAD S25Granulatedryer-/conveyor:VismecFurther Accessory:Spindlechiller
Macmon M100 通用铣床，带水平头 - 铣削主轴 - 主轴转速数：16 - 主轴转速：40、63、80、100、125、160、200、250、320、400 500、630、800、1000、1250、2000转/分钟 - 主轴内锥度：ISO 40 - 夹头直径最大：25毫米 -主轴块 - 主轴块手动排量：170毫米 - 垂直铣床 -夹持面尺寸：640 × 195 毫米 -2个T型槽，宽度/间距：12 / 90 毫米 - 纵向自动/手动：290 / 310 毫米 - 垂直自动/手动：310 / 340 mm -进给齿轮箱 - 进弹次数：16 - 进料尺寸（毫米/分钟）：9、14、18、22.4、28、35.5、45 56、71、90、112、140、180、224、280、450 -运动主轴 - 桌面纵向移动（1圈）：5毫米 - 桌面垂直移动（1圈）：2.5毫米 - 主轴块移动（1圈）：2毫米 -1条刻度线（纵向和垂直方向）：0.02毫米 -1 渐变行程（横向）：0.01 毫米 ...
Macmon M100 通用铣床，带垂直头 - 铣削主轴 - 主轴转速数：16 - 主轴转速：40、63、80、100、125、160、200、250、320、400 500、630、800、1000、1250、2000转/分钟 - 主轴内锥度：ISO 40 - 夹头直径最大：25毫米 -主轴块 - 主轴块手动排量：170毫米 - 垂直铣床 -夹持面尺寸：640 × 195 毫米 -2个T型槽，宽度/间距：12 / 90 毫米 - 纵向自动/手动：290 / 310 毫米 - 垂直自动/手动：310 / 340 mm -进给齿轮箱 - 进弹次数：16 - 进料尺寸（毫米/分钟）：9、14、18、22.4、28、35.5、45 56、71、90、112、140、180、224、280、450 -运动主轴 - 桌面纵向移动（1圈）：5毫米 - 桌面垂直移动（1圈）：2.5毫米 - 主轴块移动（1圈）：2毫米 -1条刻度线（纵向和垂直方向）：0.02毫米 -1 渐变行程（横向）：0.01 毫米 ...
Deckel FP 2 / 三轴数字显示器 Heidenhain ND 780 刀具铣床 - 行程路径 X/Y/Z：450 x 200 x 400 mm - 工作台夹持面 700 x 350/可倾斜旋转转盘 - 转速范围：40–2000转/分钟 - 三轴均提供进弹和快速横转 -刀具夹具：ISO 40 - 带垂直滑头的垂直/水平铣削装置 -冷却装置 - 三轴数字显示屏：Heidenhain ND 780 -文献 ——薯条托盘 -各种工具夹持 -科莱茨 尺寸： 长×宽 x高 1.5×1.7×1.8米 / 重量 1600公
HERMLE UWF 802 M 通用铣床，配备HS 401路线控制 - HS 401- 轨道控制 - 行程 X / Y / Z 500x430x400mm -刚性角表 - 转速范围 18-3550转/分钟 - 三轴连续可变供料，速度0-1600毫米/分钟 - 快速航向速度为0-1.6米/分钟，三轴均为 -垂直式 - 水平铣削装置 - 刀具夹具 ISO 40 - 液压工具夹持 - 中央润滑 ——薯条托盘 -驱动功率 6千瓦 -工作灯 - 主轴保护 -文献 尺寸 长×宽×高 1.9x1.8x1.9米 / 重量：1800公
这款三轴WEMAS VZ 750 CENTURY于2001年制造。其X轴行程为750毫米，Y轴行程为500 毫米，Z轴行程为500毫米。该机器配备了Heidenhain TNC 426控制单元、电子手轮和换刀器。如果您希望获得高 量的加工能力，可以考虑我们正在出售的WEMAS VZ 750 CENTURY立式加工中心。如需更多信息，请联系我们
Key data: 500 mm, 400 mm, 400 mm
通用铣床与钻床 DECKEL MAHO DMU 50米 控制Heidenhain TNC 310 制造年份：2001年 行程：X 500 Y 400 Z 400 速度范围：20 – 4,500转/分钟，无限可变 配上以下配件： 手动旋转——带数字显示的C+B轴旋转桌 700毫米×500毫米夹持面 X、Y、Z轴电子手轮 防溅罩舱 机械灯 4高度可调机鞋 冷却液设置 操作说
Main spindle with drive motor, universal milling head, milling chuck, milling extension, angle milling head, top slide, top slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper tool slide from Mikron VC500D CNC milling machine -Motor: INNDRAMAT 165V 5.5 kW see photo type plate 100C-B050B1-AS03 -Speed: 1500/8000 rpm -Spindle head: SK40 mount -Dimensions: 910/1120/H510 mm -Weight: 365 kg
Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Manufacturer: MIKRON, milling machine table T-slot table from CNC machining center type VC500D -Table surface: 400 x 900 mm -T slots: Slot width 18 mm, slot spacing 125 mm -Transport dimensions: 400/900/H175 mm -Weight: 288 kg
Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Manufacturer: Deckel MAHO, milling machine table T-slot table from CNC machining center -Table surface: Ø 800 mm -T slots: Slot width 14 mm, slot spacing 63 mm -Transport dimensions: 800/800/H300 mm -Weight: 355 kg
市面上有一款CNC三轴铣床Emco。行程 X/Y/Z：900毫米/500毫米/500毫米，工作台尺寸 X/Y：1000毫米/520毫米，最大工作台载重：800公斤，转 ：10000转/分钟，主轴功率：11千瓦，刀具夹持：SK40， 快速横转：24米/分钟。机器尺寸 X/Y/Z：约 2600mm/2450mm/2950mm，重量约 4800kg，控制：西门子 Sinumerik 828D。文档可查。现场检查是可能的
这款三轴HERMLE U 630 T于2001年制造。其X轴行程为630毫米，Y轴行程为500毫米 ，Z轴行程为500毫米。该机器的桌子尺寸为900 x 528毫米，最大桌面载重为400公斤。如果您希望获得高 量的加工能力，可以考虑我们出售的HERMLE U 630 T立式加工中心。如需更多信息，请联系我们
