钣金加工设备 二手 出售 (3,380)

Segment bending machine Segment widths: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 and 275mm. Sheet width 1020 mm Sheet thickness 2.5 mm Stand width 1050 mm Opening width mm Bending angle max. 135 ° Machine weight approx. 0.32 t Space requirements approx. 1.4 x 0.6 x 1.3 m Auction-ID: A7-41156-6

Profile steel shears with notches Round steel 30 mm Square steel 28 mm Angle steel 60 x 8 mm Flat steel 100 x 12 mm Total power requirement 1.5 kW Machine weight approx. 0.5 t Space requirements approx. 1.5 x 0.7 x 1.8 m Condition: never used / new (5) Auction-ID: A7-41156-59

Material / Max Capacity / Min Radius Flat / 1 1/4\" / 10\" C Channel 1x2\" / 60\" Round Tube 1 1/2\" / 20\" Round Tube 2\"/60\" Diameter of rollers 1 1/2\" Maximum tube diameter 38 mm. Condition: never used / new (5) Auction-ID: A7-41156-173

Profile steel shears with - 1 foot trigger - Support tables - Rectangular notches - Hole punch incl. tools Round steel 30 mm Square steel 25 mm Angle steel 80 x 80 x 8 mm Cutting capacity flat steel 200 x 13 / 350 x 6 mm Punching force 40 t Projection 175 mm Working stroke 32 mm Working height 980 mm Hole diameter in sheet thickness: 20 x 15 / 38 x 8 mm Total power requirement 3.0 kW Machine weight approx. 0.62 t Dimensions LxWxH 1.0 x 0.8 x 1.3 m Condition: unchecked (6) Auction-ID: A7-41156-22

Folding machine with - Motorized upper bolster adjustment - Motorized underbeam adjustment - Good condition Sheet width 2040 mm Sheet thickness 3.0 mm Stand width 2060 mm Back gauge - adjustable mm Adjustability of the lower beam 110 mm Stroke of the upper beam 270 mm Total power requirement 7.5 kW Machine weight approx. 3.7 t Dimensions approx. 3.1 x 1.5 x 1.5 m Auction-ID: A7-41156-41

Horizontal bending machine with: - NC control - Double footswitch - Set of standard tools Pressure 10 t Stroke 200 mm Table size 450 x 450 mm Working speed: 10 mm/sec. Working height 940 mm Tool height max. 150 mm Total power requirement 1.1 kW Bending capacity 150 x 6 mm Weight 0.4 t Dimensions 1.15 x 0.5 x 0.9 mm Condition: never used / new (5) Auction-ID: A7-41156-11

Profile steel shears Round steel 25 mm Square steel 22 mm Angle steel 70 x 7 mm Cutting capacity 100 x 10 mm Sheet thickness 10 mm Total power requirement 1.3 kW Machine weight approx. 0.6 t Space requirement approx. 1.1 x 0.65 x 1.5 m Condition: unchecked (6) Auction-ID: A7-41156-4

Includes: 2 different workbenches Auction-ID: A1-40061-13

Hand bending machine Flat bar 30 x 8 mm Square steel 12 mm Round steel 15 mm Weight 0.025 t Package size max. 51 x 31 x 22 cm Condition: never used / new (5) Auction-ID: A7-41156-161

Pressure 20 t Stroke 200 mm Table size 550 x 550 mm Working speed: 10 mm/sec. Working height 940 mm Tool height max. 200 mm Total power requirement 2.2 kW Bending capacity 200 x 10 mm Weight 650 kg Dimensions 1.1 x 0.6 x 1.22 m Condition: never used / new (5) Auction-ID: A7-41156-16

Combination machine, sheet metal roller, bending and cutting Bevel max. 1 mm. Rollers max. 1 mm. Cut max. 1 mm. Width of segments 25 - 50 - 75 - 75 - 105 mm. Maximum working width 305 mm. Diameter of the rollers 38 mm. Maximum bending angle 90 degrees. Condition: never used / new (5) Auction-ID: A7-41156-113

Combined profile steel shears - Hole punch - Notches - 2 footswitches - Tool cabinet incl. contents see pictures Round steel 35 mm Square steel 32 mm Angle steel 65 x 9 mm Flat bar 100 x 15 mm Pressure capacity 45 t Hole punch: Capacity (drm. x thickness) 30x12 / 24x15 mm Total power requirement 2.8 kW Machine weight approx. 0.5 t Space requirement approx. 0.75 x 1.0 x 1.5 m Auction-ID: A7-41156-100

Make / Model: TRUMPF TruPunch 3000 Type: S11 Year of manufacture: 10/2013 Machine No.: A0035A0306 Max. cutting force: 180 kN Connected load: 18.0 kVA | 400 V, 50 Hz Control voltage: 24 V Compressed air connection: 7–14 bar Condition: Used, externally in good condition, incl. control panel For sale is a high-quality TRUMPF TruPunch 3000 punching machine, built in 2013. The system impresses with its reliable performance and high precision for medium to large sheet metal processing series. This machine is equipped with a maximum cutting force of 180 kN and requires a connection of 18.0 kVA at 400 V / 50 Hz. The TruPunch 3000 is ideal for industrial applications with high quality requirements and enables flexible production with short set-up times. The general condition is maintained, the machine is still in operation and can be viewed under power by arrangement. The control  ...

For sale is a CNC-controlled swivel bending machine of the type SCHRÖDER PowerBend Universal, designed for precise sheet metal processing in medium to large series. The machine is in a very well-maintained condition and was last used in an industrial company. Equipped with the POS 2000 Professional touchscreen control, the system allows convenient programming and repeatability while maintaining bending quality. Thanks to its robust design and well thought-out ergonomics, the machine is suitable for both classic bending work and demanding special bending shapes. Technical highlights: Model: SCHRÖDER PowerBend Universal Control: POS 2000 Professional with touchscreen Operation: Foot pedal + manual control functions Drive: Electric/motorized with rear material stop Condition: Very good condition, ready for immediate use Equipment: CNC control incl. screen and control panel Rob ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 6700 €: 129.31 €: 1550 mm: 2 mm: 90 mm: 6 m/min: 1.5 kW: 2130 mm: 700 mm: 1200 mm: 545 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotorlateral roll adjustable by handwheellongitudinal grooves in lower and lateral rolltiltable upper rollright / left rotation with double foot switchconical rolling deviceuser manual in GERMAN or ENGLISHOPTIONS:powered back roll EUR 1.000,-digital readout EUR 1.100,-The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Spanien : 110 to: 4-30 mmpunching unit with hydraulic stripperhydraulic material clampsX- und Y- axis on ballscrews,each with servo motorCNC control OmronFlash memoryTouchscreenOPTIONAL EQUIPMENT:TRIPLE PUNCHING UNIT: 31/31/31 MM € 4.500,-central punch:100 % of punching forcemax. Dm. 31 mmmax. thickness 20 mmmax. Dm./thickness 31/20 mmlateral punches75 % of punching forcemax. Dm. 31 mmmax. thickness 20 mmmax. Dm./thickness 31/18 mmTRIPLE PUNCHING UNIT: 31/40/31 MM € 5.100,-central punch:100 % of punching forcemax. Dm. 40 mmmax. thickness 20 mmmax. Dm./thickness 40/20 mmlateral punches60 % of punching forcemax. Dm. 31 mmmax. thickness 20 mmmax. Dm./thickness: 31/15 mmtriple punching unit withmarking station:punching capacity as abovemax. thickness 20 mmmarking force 700 kNmax. 10 characters, interchangeabledimensions of characters 10 x 7 mm MODEL 31 ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 12700 €: 243.84 €: 1270 mm: 5 mm: 140 mm: 3,5 m/min: 2.2 kW: 2470 mm: 750 mm: 1000 mm: 1350 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotormanual Back Rollforward tiltable upper rollforward and reverse revsconical bending by tilt of backrollmovable control panelusers manual in ENGLISH or GERMANOPTIONS:hardened Rolls€ 1.500,-Motorised Back Roll (Power Rear Roll)€ 1.200,-Digital Read-Out€ 1.200,-The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 51900 €: 980.91 €: 120 mm: 390 mm: 3 : 15 kW: 2/7,5 m/min: 125x25 mm / 1.200 mm, 30x : 200x50 mm / 1.000 mm, 100 : 65x65 mm / 750 mm, 20x20 : Ø 80 mm / 850 mm, Ø 20 mm : Ø 160x4 mm / 2.800 mm, Ø : 120x40x4 mm / 1.800 mm, 3 : 90x90x5 mm / 1.800 mm, 30 : 120x120x12 mm / 1.200 mm, : 100x100x10 mm / 1.200 mm, : UPN 220 / 1.000 mm, UPN 1 : UPN 220 / 1.200 mm, UPN 1 : IPN 220 / 1.000 mm, IPN 8 : 2000 mm: 1650 mm: 1900 mm: 4450 kg3 rolls driven (hydromotor and planetary gearbox)shafts made of special steel,hardened and groundhydraulic adjustment of the 2 lower rollshardened universal rollslateral rolls hydraulic adjustable in 3 axeshorizontal and vertical operationmobile operating panel2 working speedsdigital read out (3 axes)machine and equipment accordingto the CE regulationsuser manual in GERMAN and ENGLISHWE HAVE MORE THAN 210 REFERENC ...

: neu : ca. 4 Wochen ab Auftragse : Italien : 15200 €: 291.84 €: 22 to: 200 mm: 150 x 10 mm: 1100 x 630 mm: 120 mm: 55 mm: 4,6 - 8 mm/s: 70 mm/s: 45 l: 1,5 kW: 925 mm: 1200 mm: 900 mm: 1050 mm: 630 kg2 holder pins, height 110 mm (higher ones on request)Manual stop 500 mm with millimeter scaleAdjustable speed2 handwheels for adjusting the stroke and retraction pointPrecise hydraulic stroke adjustment, even under pressureTwo-hand operationHuge range of tools, prices on requestALTERNATIVE:Version with CNC controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 31600 €: 603.56 €: 2050 mm: 6 mm: 6 mm: 4 mm: 4 mm: 3 mm: 150 mm: 150 mm: 130 mm: 1,5 / 6 m/min: 4 kW: 4250 mm: 960 mm: 1100 mm: 2800 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are recommende ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 45700 €: 872.87 €: 2540 mm: 6.5 mm: Hydraulisch : 135 °: 3900 mm: 1750 mm: 2050 mm: 6200 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° € 48.300,--OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm € 11.400,--(sample photos)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 6400 €: 123.52 €: 1270 mm: 2.5 mm: 90 mm: 6 m/min: 1.1 kW: 1850 mm: 700 mm: 1200 mm: 520 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotorlateral roll adjustable by handwheellongitudinal grooves in lower and lateral rolltiltable upper rollright / left rotation with double foot switchconical rolling deviceuser manual in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2023 : 9676 : prompt, Zwischenverkauf v : Deutschland : 13700 €: 1 : 1250 mm: 1.25 mm: 1,25 mm bei 1 Messerpaar, : 0.37 kW: 36 m/min: 70 mm: 1900 mm: 1600 mm: 1000 mm: 350 kgdemo machine / mint condition - fixprice3 pairs of bladesLength measuring by wheelDigital preselection of one positionBrake motorRubber feeding rollsManual crosscutting equipment in front and behind blade shaftwith 1 cutting slide which alternaingly can be used on front and backsideUser manual in GERMANOPTIONS:Additional pair of bladesDecoilerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 8020 mm: 1.5 mm: 2 mm: 1.5 - 2 mm: 6 : 6 : 1000 mmfully automatic bending in two ways without the need to rotate the sheethydraulic driveBMS MULTI-Touch with automatic depth stoppowered rotary shearadditional rail on the bending beammaterial support2x foot pedalsafety equipment accoring to the control rules BG Germany3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment)the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles andnarrow/wide bendings for easy intermateing price on request Fully automatic gr ...

Peddinghaus PEDDY E – Universal punching and shearing machine For sale is a robust and versatile universal machine from the renowned manufacturer Peddinghaus (Made in Germany) – model PEDDY E. The machine is designed for a wide range of machining in the field of steel construction, metal construction and locksmithing. It is ideal for cutting, punching and notching a wide variety of profiles. • Type: Pedding house PEDDY E • Machine No.: 4061259381069 • Drive: electric motor 5.9/4 kW, 220/380 V • Frequency: 50 Hz • Control voltage: 220 V • Designed for material processing such as: o Flat steel, angle steel, round material, C/Z profiles, INP/IPE beams o Punching up to Ø 1 1/8\" (28 mm) o Cutting capacity up to 100 mm INP o Material thickness: up to approx. 12 mm (depending on the profile type) Auction-ID: A7-41093-46

： gebraucht ： 2017 ： 8063 ： prompt， Zwischenverkauf v ： China ： 1710 €： 1 ： 1020 mm： 1.5 mm： 135 ： 1348 mm： 850 mm： 1175 mm： 285 kg上梁带截面助推器气缸用户手册，德文和英文。本� �告数据由ModulMWS——LogoTech oHG的软件解决方案创建�

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 1032 €: 1 1/4 42,4, 1 1/2 48,3 mm: 3 mm: 2.5 mm: 15 kgThe AL 3 can be used to notch pipes with an external diameter of 42.4 mm (1 1/4”) and Ø48.3 mm (1 1/2”).ALMI products are subjected to stringent quality control inspections before they leave the factory.ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use.Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 788 €: 3/4 26,9 mm, 1 33,7 mm, mm: 3 mm: 2.5 mm: 8 kgThe AL 1 can be used to notch pipes with an external diameter of 26.9 mm (3/4",), 33.7 mm (1",) and 42.4 mm (1 1/4",).The hand-operated machines can be easily wall mounted.With ALMI pipe notchers filing or milling pipes has become a thing of the past.The major benefit of this pipe notcher, compared to other notchers, is that one unit can be used to notch a series of diameters without needing to change parts for each diameter.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

： gebraucht ： 9548 ： prompt， Zwischenverkauf v ： China ： 115 €： 1 ： 150 mm： 6 mm： 290 mm： 90 mm： 560 mm： 14 kg平钢可达70 x 6 mm圆钢可达11 mm运输尺寸 330 x 330 x 160 mm。本广告数据由LogoTech oHG的软件解决方案ModulMWS创建�

: ca. 12 - 14 Wochen ab Auf : Türkei : 20000 €: 5 mm: 1200 mm: 2,2+0,75 kW: 4,1 m/min: 3000 mm: 750 mm: 1400 mm: 1350 kg: 250 / 2000 mm: 300 mmMobile control panelHydraulic clamp on centerGearbox motor with brakeMotorized sheet centering systemInside cutting systemAccording to EC safety regulationsOperating manualOptional equipment: 1 spare blade set € 1.200,00 Flanging attachment with 1 set rolls € 2.000,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.