钣金加工设备 二手 出售 (3,380)

: neu : ca. 12 Wochen ab Auftrags : Türkei : 39400 €: 628.39 €: 32900 €: 2050 mm: 10 mm: 10 mm: 8 mm: 10 mm: 8 mm: 8 mm: 6 mm: 200 mm: 200 mm: 180 mm: 6 m/min: 3850 mm: 1350 mm: 1290 mm: 3750 kgmotorized roller driveupper and lower roller drivenhydraulic side roll feed3 digital displayshydraulic folding bearingshardened rollersconical bending deviceuser manual in GERMAN or ENGLISHOPTIONAL EQUIPMENT:overhead craneside supportsNC controlvariable speedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 7570 €: 146.1 €: 50 to: 130 mm: 13/27 mm: 23 1/min: 3 kW: 1100 mm: 900 mm: 1550 mm: 355 kgportable, hydraulic punching machinetable with gaugefoot pedaluser manual in German or EnglishThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 29000 €: 553.9 €: 2050 mm: 4 mm: 42 1/min: 750 mm: 7.5 kW: 800 mm: 450 mm: 2700 mm: 2300 mm: 1350 mm: 2800 kgmotorizedback gauge atrecirculating ballscrew with Control DT5hold down with rubber padsSide Lay with T-Slot2 Sheet support armsball in the tabletape measuretilting stoplight barriers on the back of the machinecutting line illuminationuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Equipped with crate with various punching parts, lifting eye on machine, on and including 1 pallet. Auction-ID: A1-38447-201

: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm: 25 mm: 25 mm: 16 mm: 20 mm: 18 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movemen ...

: neu : 2025 : 090089 : prompt, Zwischenverkauf v : Türkei : 8900 €: 171.77 €: 1 : 20 to: 185 mm: 200 x 12 mm: 480 x 1060 mm: 200 mm: 80 mm: 10 mm/s: 10 mm/s: 2.2 kW: 930 mm: 1150 mm: 480 mm: 1200 mm: 530 kgProgrammable stroke and retraction pointAdjustable speed and pressureManual jog operation and automatic operating modeHolding pins and tools hardened and ground3 holder pinsBending toolManual stop 400 mmFoot pedalOPTIONS:Cutting-, punching- or pipe bending tools on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Discharge 750mm. Auction-ID: A1-38447-113

Discharge 350mm. Auction-ID: A1-38447-114

Auction-ID: A1-38447-208

: neu : ca. 10 Wochen ab Auftrags : Türkei : 55300 €: 1045.17 €: 2550 mm: 2.5 mm: 1.5 mm: 3.5 mm: Motorisch : 3830 mm: 2200 mm: 1900 mm: 4050 kg: 1000 mmCNC control with tabular programming- 15,6", touchscreen controller on swivel arm- tabular programming by entering the axes values- open or drop hemming function- multi radius bending function as by pressing or by bending- programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length- piece counter- autorisiation with password- 128GB HDD allows almost unlimited data storage- remote service connection via WLAN- detailled alarm, tool and paramter pageMotorized drive (AC motors) of the upper and bending beam (Z and Y axes)Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration,with ball rollers in the sheet metal insert ...

: neu : 2024 : 9738 : prompt, Zwischenverkauf v : Türkei : 20300 €: 389.76 €: 1 : 1530 mm: 6 mm: 6 mm: 4 mm: 150 mm: 4 kW: 3100 mm: 1120 mm: 1020 mm: 2100 kg3 rollsAsymmetrical rolls arrangement - with pre-bending2 driven rollsMotorized adjustment of lateral and clamping rollDigital read-out for lateral and clamping rollSwiveling top roll to the frontForward/reverse runHardened rollsMoveable control panelUser manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 6900 €: 133.17 €: 500 kg: 1200 mm: 400 mm: 550 mm: 300 mm: 80 mm: 1450 mm: 1200 mm: 1640 mm: 260 kgmotorized drivemechanical adjustable coil mandrel with 4 jawsspeed control for decoiling speed aswell as acceleration- and deceleration timesphotoelectric proximity ensor SICK for sag controlPNEUMATIC DOWN HOLDER SUPPORT ARMThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 9729 : prompt, Zwischenverkauf v : Türkei : 28450 €: 488.96 €: 1 : 25600 €: 1550 mm: 7 mm: 7 mm: 4.5 mm: 4.5 mm: 3.5 mm: 150 mm: 150 mm: 130 mm: 1,5 / 6 m/min: 4 kW: 3750 mm: 960 mm: 1100 mm: 2500 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:(time of deliver with options approx. 10 weeks)Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can  ...

: neu : 2025 : 090120 : prompt, Zwischenverkauf v : Türkei : 7100 €: 137.03 €: 1 : 1 : 1050 mm: 3 mm: 90 mm: 6 m/min: 1.1 kW: 1630 mm: 700 mm: 1200 mm: 480 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotorlateral roll adjustable by handwheellongitudinal grooves in lower and lateral rollhardened rollstiltable upper rollright / left rotation with double foot switchconical rolling deviceuser manual in GERMANThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 32900 €: 628.39 €: 50 mm: 4000 mm: 950 mm: 1250 mm: 430 kg: 6 cm³: 50 x 3,31 mm: Ø 1”1/4 mm: Ø 50 x 2,5 mm: 40 x 40 x 4 mm: 25 x 50 x 6 mm: 50 x 25 x 2,7 mm: 60 mm: 200 mm: 20 mm: 210 °: 1,25 / 2,5 : 3.5 kW: 15 lWith mandrel 3 m lengthCan be used with or withoud mandrelTwo bending speedsProgrammable bend sequencing and mandrel retractionIndependent clamp and pressure die adjustmentMicrometer wiper die adjustmentAuxiliary system for stabilizing the hydraulic slide pressureQuick tool change systemWith pneumatic material clamping and DRO system for linear and rotational positioningALTERNATIVELY:model with mandrel 6 m length price on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mmplate thickness: 4 mmdistance between columns: 3050 mmtotal power requirement: 8 kWweight of the machine ca.: 4.8 trequired space: mEHT hydraulic guillotine shear, type TSS4-31.TECHNICAL DATABlade length: 3100 mmFrame overhang: 300 mmClearance between columns: 3050 mmRipstop adjustment: 10–1000 mmUpper blade cutting angle: 1 degreeHydraulic system pressure: 300 barOil tank capacity: 160 litersOil grade: 3 E at 50 degreesOperating voltage: 380/220 volts, 50 HzTotal power consumption: 8 kWMachine weight: 4800 kgACCESSORIES:Front side stopFront table supportsMotorized back stopSheet metal collection trolleyNew replacement bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

板宽：1270毫米，板厚：2.0毫米，柱间距：1295毫米，� �照开口：46毫米：135。总功率需求：手工生产，机器� ��量约0.4，机器尺寸约1.6 x 0.8 x 1.2米。节段弯曲机，新建。段宽：25、30、35、40、45、 50、75、100、150、200、250、270毫米。含材料挡位，最大 660毫米。本广告数据由ModulMWS——LogoTech oHG的软件解决方案创建�

板宽：1020毫米，板厚：2.0毫米，柱间距：1050毫米，� �光开口：46毫米：135，总功率需求：手工生产，机器� ��量约0.35，机器尺寸约1.3 x 0.75 x 1.2米，新型节段弯曲机。段宽：25、30、35、40、45、50� ��75、100、150、200、270 含材料止挡，最大660毫米。本广告数据由ModulMWS创建� �—LogoTech oHG的软件解决方案�

sheet width: 1070 mmplate thickness: 4 mmdistance between columns: 1100 mmdiameter of upper rolls: 110 mmtotal power requirement: 5,0 KWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 2,0 x 0,9 x 1,1 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1070 mmplate thickness: 9.0 / 10,0 mmdistance between columns: 1070 mmdiameter of upper rolls: 190 mmpre-bending capacity: 9,0 mmconnected load: 5,3 kWweight of the machine ca.: 2,4 tdimensions of the machine ca.: 2,7 x 0,92 x 1,2 mm- Electrically adjustable rear roller- Electrically adjustable lower roll (material clamping)- Digital readout for rear roller movement- Digital readout for lower roll movement (material clamping)- Hardened rolls- Conical rolling- Swiveling top roll- Brake motor- Emergency stop- Documentation- 400VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for 0 pipes. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 800 x 1000 mm Weight: 270 kg Auction-ID: A7-39943-35

Hydraulic press for crimping hydraulic hoses, equipped with all the necessary dies for 0 hoses. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 800 x 1000 mm Weight: 270 kg Auction-ID: A7-39943-60

空心：1500毫米板厚：0.5-50毫米有效载荷：300公斤/fm进 料，无级进料：0-4米/分钟控制：NC总功率需求：33千� �，机器重量约4,200公斤。本广告数据由ModulMWS开发—� �LogoTech oHG的软件解决方案�

pressure: 35.0 tchamfer lenght: 1250 mmdistance between columns: 1095 mmstroke - stepless adjustable: 215 mmcolumn arm: 410 mmtable height: 800 mmdayligth: 455 mmworking feed: 10.0 mm/secreturn speed: 56.0 mm/secwork height max.: ca. 875 mmControl: DM 51 Number of working hours: ~ 13.300 hoil volume: 80.0 loperating pressure: max. 240 barvoltage: 380 Vtotal power requirement: 4.0 kWweight: 2500 kgrange L-W-H: 1700 x 1450 x 2250 mmFeatures:- Robust CNC-controlled hydraulic press brake- With DELEM CNC control unit DM 51” Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1+Y2 axis) Program + tool storage possible Swiveling control panel, front left- CNC electric motor-driven backgauge (X axis)- CNC electric motor-driven height adjustment of the stop (R axis)- 2x manually adjustable stop fingers- 1x split set of deer foot tools - top- 1x split set of Multi V tools ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 42400 €: 809.84 €: 2540 mm: 4.5 mm: Hydraulisch : 135 °: 3900 mm: 1700 mm: 1900 mm: 5100 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° € 45.100,--OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm € 11.400,--(sample photos)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 41200 €: 786.92 €: 2540 mm: 3.5 mm: Hydraulisch : 135 °: 3.7 kW: 3850 mm: 1700 mm: 1860 mm: 3900 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° € 42.900,--OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm € 11.400,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 19600 €: 376.32 €: 55 to: 500 mm: 5 : 40/10 bzw. 20/20 mm: 20 mm: 37 1/min: 300x15 / 200x20 mm: 10x42x90 mm: 5 kW: 2100 mm: 1160 mm: 2090 mm: 1750 kg2 foot pedals for independent work at 2 stationshydr. driveflat bar shearangle bar shear with minimum deformationby diagonal moving of the bladeround and square bar shearrectangular notching unitpunching unit up to diam. 40 mmfast hydraulic, Ankörnvorrichtungoilfillingtable at the punching station with gaugetable at the notching unit with gaugetable at the flat bar shearuser manual in GERMAN and ENGLISHOPTION:Kit € 970,00length stop 1000 mm with contact switch, for angle, flat or bar stationmagnetic machine lamp10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

： gebraucht ： 1988 ： 070009 ： prompt， Zwischenverkauf v ： Deutschland ： 1600 €： 400 mm： 700 mm： 1500 mm： 2050 mm： 820 mm： 1000 mm，带制动器及两个备用芯棒。本广告数据由 ModulMWS - LogoTech oHG 的软件解决方案创建�

consisting of various bending units, as well as hydraulic units Auction-ID: A7-40438-105

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for 0 pipes. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 1000 x 1400 mm Weight: 310 kg Auction-ID: A7-39943-26