钣金加工设备 二手 出售 (3,374)

table length: 3000 mmtable width: 1500 mmburner heads: 1 laser capacity in Watt: 2000 table:: 2 x-travel: 3010 mmy-travel: 1510 mmz-travel: 100 mmcontrol: Bosch type: CC320 Trumagraph mmtotal power requirement: kWweight of the machine ca.: 15,2 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

板材宽度：3000 mm板材厚度：10 mm支架宽度：3300 mm总功率要求：kW机器重量 约：15 t空间要求约：m数据量，此广告是使用ModulMWS创建的 - LogoTech oHG的机器管理�

板材厚度：1.6毫米压力：450 MPa开槽能力：150 x 150 x 90 工作台面：650 x 500毫米底座高度：875毫米切割角 - 上刀：4 机器重量约：75公斤手动开槽机带底座，板材厚度（� �450MPa）最大1.6毫米，铝高达2.25毫米，塑料最大3.0毫� �，演示设备 本广告的数据是用ModulMWS创建的 - LogoTech oHG的机器管理�

x-travel: 3000 mmy-travel: 4000 mmz-travel: 640 mmControl: Siemens Sinumerik 840D table-size: 3000 x 4000 mmswivelling +/-: 57 Gradtraversing speed: x-axis: 20000 mm/miny-axis: 20000 mm/minz-axis: 12000 mm/minpositioning accuracy: +/-0,1 mm/mrepeating accuracy: +/-0,025 mmtotal power requirement: 15 kWweight of the machine ca.: 4 tequipped with:- CNC Siemens control Sinumerik 840D,Handwheel and Siemens SIMATICS7-300 and SIMODRIVE 611, 1GB HHD Drive- Machine works with 2D cutting head- High pressure translator pump model 20 XD -55 (415Mpa, 75KW)- Paser 3 abrasive blast cutting system- Water softening dosing system- height sensor and collision monitoring for the 2D head,- Pneumatic tool clampingNew X-axis spindles in 2017New table support system 2017,Abrasive desludging system & new grease lubrication system 2017Operating hours approx. 16700hdismantled and storedThe data for this ad was c ...

pressure: 300 tsquare measurement: . mmdiameter: . mmtotal power requirement: 15 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

板材宽度：2020 mm板材厚度：1.5 mm支架宽度：2050 mm开口宽度：100 mm总功率要求：0.75 kW机器重量约：1 t空间要求约：2.7 x 1 x 1.5 m电动钣金弯曲机，带分段式上部和弯曲脸颊电动弯曲 角度无级可调脚踏板操作该广告的数据是使用模态MWS� ��建的 - 标识科技oHG的机器管理�

sheet width: 2050 mmplate thickness: 4,5 mmpre-bending: 4,0 mmmin. dia.: 210 mmroll diameter: 140 mmweight of the machine ca.: 1530 kgdimensions of the machine ca.: 3220x1200x900 mmStandard features:- Central rollers via electric motor, planetary reduction gear andGear drive driven- Swivel top roller- Main engine with brake device- Conical bending device- Mobile controller and foot pedal- CE mark / Declaration of ConformityAdditional equipment:- motorized rear roller adjustment- Digital display for back roller- induction hardened rollsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 500 kNhole diameter in sheet thickness: Ø 27 in 13 / Ø 28 in 10 mmno. of strokes: 23 Hub/minthroat: 130 mmstroke: 30 mmtotal power requirement: 3 kWweight of the machine ca.: 295 kgOverall size: 1100x900x1550 mmStandard equipment:- punching tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mmplate thickness: 3,3 mmpre-bending: 3,0 mmroll diameter: 90 mmmin. dia.: 130 mmtotal power requirement: 1,1 kwweight of the machine ca.: 570 kgdimensions of the machine ca.: 2100 x 800 x 1130 mmDomestic equipments:- Asymmetrical 3-roll round bending machine with motor drive- Upper roller swung out- Conical bending device- Main engine with brake deviceAdditional equipment:- motorized rear roller adjustment- Digital display for back roller- induction hardened rollsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 200 kNstroke length max.: 200 mmworking feed: 10 mm/secreturn speed: 20 mm/sec: 480x1060 mmwork height max.: 900 mmtoolpiece height max.: 200 mmtotal power requirement: 2,2 kW: 200x12 mmbending capacity max. - round: 48x4,0 mmweight: 500 kgOverall size: 1010x480x1120 mmDomestic equipments:- with semi-automatic control (99 programs with 16 steps each)- including bending bolt (without punch)- Tool holder for dies- Foot pedalEquipment:- Stamp, small U = 145 mm 85 °, H = 200 mm, R = 5 mm- Quick change monometer 85 °, H = 200 mm, V = 63 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 50 mm: 8,5 U/min: 100 kNroll diameter: 162 mmDrive: 1,5 kWweight: 495 kgrange L-W-H: 1100x850x1100 mmEquipment / Accessories:- Three driven rollers- Hydraulic delivery of the upper roller- Digital display with memory function- Working position horizontal and vertical- Bearings with tapered roller bearings- Use of replaceable slide rails on the guide carriageThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2100 mmplate thickness: 8 mmpre-bending: 6 mmupper roll diameter: 190 mmlower roll diameter: 170 mmside roll diameter: 150 mmtotal power requirement: 3 kWweight of the machine ca.: 3.450 kgMachine dimensions approx.: 4040x1380x1255 mmAccessories / equipment:- Conical bending device- induction hardened rolls- digital display for side rollers- Machine made of steel construction- Separate control panel- two speeds- all rollers on ball bearings- Folding and support bearing from the top roller is actuated from the control panel.When the folding bearing is opened, the roller moves automatically upwards.- Conical adjustment of the rollers via control panel- Central rollers are via hydraulic motor and rotary reduction geardriven. (Top and bottom rollers)- CalibrationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 13 mmthickness at Niro-steel: 8 mmcontrol: CYBELEC CybTouch down holder: 14 Stückcutting angle: 2,0° °no. of strokes: 11 Hub/minvoltage: 380 Vtotal power requirement: 22 kWweight of the machine ca.: 12.100 kgdimensions of the machine ca.: 4000x2240x2235 mmAccessories / equipment:- CYBELEC-CybTouch control panel with digital display for backgauge- hydr. Cutting gap adjustment via control- 1 side stop- 4 front lifting arms- cut line lighting- Cutting gap adjustment- Cutting length limit- Ball rolls in the table- motorized back gauge 1.000 mm travel with recirculating ball screws,   automatically start at the end of the stop- Shear knives for stainless steel cuts as standard- Photocell behind the machine- SIEMENS electrical system- BOSCH / HOERBIGER hydraulic system- Footswitch- Operating instructions in GermanThe data for this ad was created with M ...

sheet width: 1250 mmplate thickness: 5,5 mmpre-bending: 5,0 mmroll length: 1280 mmmin. dia.: 210 mmroll diam. toproll: 140 mmweight: 1365 kgrange L-W-H: 2.020 x 900 x 1.200 mmStandard features:- Central rollers via electric motor, planetary reduction gear andGear drive driven- Swivel top roller- Main engine with brake device- Conical bending device- Mobile controller and foot pedal- CE mark / Declaration of ConformityAdditional equipment:- motorized rear roller adjustment- Digital display for back roller- induction hardened rollsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

压力：55吨孔径，板材厚度：40英寸10毫米投影：750毫� ��行程：60毫米每分钟冲程：20毫米 冲程：38冲程/分钟电机功率：5千瓦机器重量 约：1，885千克机器尺寸：1500x1100x2000 mm配件/设备：- 冲床为您服务机器租赁长达60个月，无需首付，无残� �，个人建议和根据要求计算个人租赁费率。该广告的 数据是使用模态MWS创建的 - 标识科技oHG的机器管理�

轴直径：80 mm滚筒直径：260 mm轴转数：7 rpm输送距离：170 mm压缩力 液压缸：27 kN轴长：160 mm中心距离：450 mm总功率要求：3.7 kW尺寸：980x1430x1600 mm重量：1380 kg为您服务机器租赁长达60个月，无需首付，无残值， 个人建议和根据要求计算个人租赁费率。该广告的数� ��是使用模态MWS创建的 - 标识科技oHG的机器管理�

: R10-R260 : 210 °bending speed: 2 U/min: 1 1/4 x 3,5 mm: einphasig - 230 Vdrive motor: 1,1 kW: < 70 dBweight of the machine ca.: 80 kgdimensions of the machine ca.: 410 x 1000 x 570 mmAccessories / equipment:Hard copper and aluminum: 54x2 mmSteel tube: 42x3 mmStainless steel: 42x2.5 mmSolid material: 30 mmNumber of programs: 30 each 9 bendsControl: Soft-touch control panel in 8 different languagesMobile by driving deviceThe controller allows easy programming of the automatic cycleThe controller is equipped with a system diagnostics and has agreat language selection.Patented fast tool change systemA single bending speedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

钢管的弯曲性能：63x4.2 mm外径：最小。 5 mm弯曲半径 最小： 10 mm弯曲半径 最大： 270 mm弯曲角度： 最大 210 弯曲方向： 逆时针方向： 0.75 kW机器重量 约： 130 kg空间要求 约： 740x470x1030 mm为您服务机器租赁长达60个月，无需首付，无残值， 个人建议和根据要求计算个人租赁费率。该广告的数� ��是使用模态MWS创建的 - 标识科技oHG的机器管理�

板材厚度：1.25 mm滚筒体间距：250 mm投影：260 mm滚筒中心距离：62 mm安装：26 mm速度：6.3 m/min总功率要求：0.7 kW重量：170 kg尺寸 L-W-H：1020x600x1500 mm设备：- 电动串珠机- 5 套渗流辊- 脚踏开关- 德国- CE标志/符合性声明的操作说明为您服务机器租赁长达6 0个月，无需首付，无残值，个人建议和根据要求计算 个人租赁费率。该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理�

bar material - diameter: Ø 35 mmI-beam section - flat steel: 60x10 mmL-beam: 50 mmtube diameter max.: Ø 60x2 mmsquare material: 45x45x3 mmroll diam. toproll: 162 mmroll diam. bottom roll: 152 mmShaft diameter: 50/40 mmturning speeds: 3,3 m/mintotal power requirement: 1,5 + 0,75 kWweight: 450 kgrange L-W-H: 1050x950x1450 mmDomestic equipments:- hydr. Delivery of the top roller- standard roller set- side straightening rollers- Upper roll holder: 50.0 mm- Under roller diameter: 40.0 mm- Control panelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

板材厚度：4 mm滚筒体间距：260 mm投影：500 mm滚筒中心距：132 mm安装：40 mm速度：5 m/min总功率要求：2.2+0.55 kW机器重量约：450 kg空间要求约：1800x700x1600 mm设备：- 谐波可通过液压方式打开和关闭- 3 套渗漏辊- 脚开关- 德国- CE 标志/符合性声明上的操作说明为您服务机器租赁长达 60个月，无需首付，无残值，个人建议和根据要求计� �个人租赁费率。该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理�

压力：10巴进气量：660升/分钟灌装能力：520升/分钟。 速度：1000 rpm容器体积：90升驱动功率：4千瓦电压：400 V重量：102 kg尺寸：1110x495x1015 mm为您服务机器租赁长达60个月，无需首付，无残值， 个人建议和根据要求计算个人租赁费率。该广告的数� ��是使用模态MWS创建的 - 标识科技oHG的机器管理�

sheet width: 3100 mmplate thickness: 6 mmpre-bending: 5 mmupper roll diameter: 200 mmmin. bending diameter: Ø 300 mmbending speed: 5 m/mintotal power requirement: 5,5 kWweight of the machine ca.: 4.000 kgdimensions of the machine ca.: 4800x1300x1270 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

L-beam: 50x5 mmsquare material: 50x40x3 mmI - beam section - flat steel: 120x15 mmI-beam section - upend: 60x10 mmround material: Ø 35 mmtube diameter: Ø 70x2 mmroll diameter: 155 mmbending speed: 4,3 m/minbore: 50 mmtotal power requirement: 1,5 kWweight: 400 kgdimensions: 830x730x1350 mmDomestic equipments:- Extended special steel shafts- a set of hardened rollers- Bottom rollers are driven- lateral straightening rollers- Foot pedal- horizontal and vertical working- CE mark / Declaration of Conformity- Operating instructions in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I-beam section - flat steel: 80x20 (d1200) mmI-beam section - upend: 80x25 (d2100) mmL-beam: 50x50x6 (d1000) mmbar material - diameter: 40 (d800) mmsquare material: 60x60x3 (d4000) mmrectangle: 80x30x3 (d6000) mmtube diameter max.: 70x2 (d1600) mmtool adaptor: 60 mmroll diameter: 177 mmbending speed: 6,4 m/mintotal power requirement: 4 kWmachine weight ab.: 970 kgOverall size: 1400x950x1450 mmDomestic equipments:- hydr. roller drive- Planetary gearbox delivery of the 2 lower rollers- for extra small bending radii- hardened tool holder (42CrMo4)- Standard roller set, hardened- lateral straightening rollers- mobile control panel- 3 driven rollers- Digital display- Machine horizontal u. vertically usable- CE mark / Declaration of Conformity- Operating instructions in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4100 mmplate thickness: 35 mmpre-bending: 28 mmupper roll diameter: 540 mmlower roll diameter: 541 mmside roll diameter: 440 mmtotal power requirement: 37 kWweight of the machine ca.: 48.100 kgMachine dimensions approx.: 7670x3000x2930 mmAccessories / equipment:- Conical bending device- induction hardened rolls- digital display for side rollers- Machine made of steel construction- Separate control panel- two speeds- all rollers on ball bearings- Folding and support bearing from the top roller is actuated from the control panel.When the folding bearing is opened, the roller moves automatically upwards.- Conical adjustment of the rollers via control panel- Central rollers are via hydraulic motor and rotary reduction geardriven. (Top and bottom rollers)- CalibrationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

板材宽度：1500 mm板材厚度：1.5 mm支架宽度：1500 mm弯曲角度 最大：135 总功率要求： - kW机器重量 约：0.36 t空间要求 约： 1.7 x 0.7 x 1.3 m手动金属板折弯机，带分段上脸颊数据 fü，此广告是使用ModulMWS创建的 - LogoTech oHG的机器管理�

直径：。mm壁厚： . mm弯曲半径 最小： . mm控制： kW机器重量 约： . t空间要求 约为： . m内部： 856技术数据是制造商或运营商的规格，因此对我们无� ��束力。我们保留进行事先销售的权利，我们的业务� �销售条款和条件仅适用。关于我们 超过400台自有机器在仓库超过8500平方米的存储区域， 起重机容量70吨以上超过1000件配件为您的车间如果您� ��出售机器生产线或您的公司，请与我们联系。该广� �的数据是使用模态MWS创建的 - 标识科技oHG的机器管理�

直径：。mm壁厚： . mm弯曲半径 最小： . mm控制： 总功率要求： kW机器重量 约： . t空间要求约为： . m内部： 858技术数据是制造商或运营商的规格，因此对我们无� ��束力。我们保留进行事先销售的权利，我们的业务� �销售条款和条件仅适用。关于我们 超过400台自有机器在仓库超过8500平方米的存储区域， 起重机容量70吨以上超过1000件配件为您的车间如果您� ��出售机器生产线或您的公司，请与我们联系。该广� �的数据是使用模态MWS创建的 - 标识科技oHG的机器管理�

sheet width: siehe TD mmplate thickness: siehe TD mmpre-bending: 8mm total power requirement: 15 kWweight of the machine ca.: 14,1 tdimensions of the machine ca.: 6310 x 1660 x 1590mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.