生产厂家:
(品类: 207)
封边机IMA COMBIMA K/II/R75/760/V/R3由德国IMA-Maschinenfabriken Klessmann GmbH于2000年制造。该机器被用于木工公司和家具制造 司，用于精准地对刨花板、MDF和层压材料制成的部件 进行边缘条化。板边与边缘胶带之间的永久连接提升 成品的美观外观，同时增强了其对机械损伤和防潮 抵抗力。 封边工艺从加热胶水至正确温度开始，然后均匀地贴 面板边缘。同时，用滚轮精确压制边缘带。保持适 的温度和恒定压力确保胶水均匀粘附于组件全长，确 保高质量的表面效果。 IMA COMBIMA 封边机设计用于加工最大尺寸为2250 x 1300 x 45毫米的部件。其可调式带边速度在6至30米/分钟范围 ，使得工作速度可根据加工材料类型和生产需求调 ，确保表面质量的高精度和重复性。所有这 ...
单板焊接机 Kuper FW/J 920 用胶水接线的螺纹接合器 工作宽度920毫米 工作高度 0.4-2毫米 进给速度：15米/分钟 空气吹风加热器 锯齿缝法 电机功率 0.18kw 制造年份：2002年 空气需求 10升/分钟 尺寸：1280x560x1470mmH 体重：166公斤
双面粘性贴合器 OSAMA S2R-1000 工作宽度：1000毫米 最小/最大值。通道高度：0-90毫米 施用轴直径：185毫米 进给速度：18 米/分 电机：0.37KW 技术文档 CE证书
零件编号8010 规格 装备： - 车牌 - 预铣削 - 磁带送料器 - 2个胶水罐：用于颗粒和弹药 - 目前机器内有热熔胶（颗粒胶） - 断头台——单板预切 - 3个压力滚轮 - 2个球切单元 - 2个用于边缘成型的铣削单元（径向铣刀） - 角球总收入 - 刮除骨料——用于去除多余胶水 - 抛光单元 - 进给速度可无限变调节 8-18 米/分钟 - 元件厚度 6-45毫米 - 最小工件长度 180mm - 最小工件宽度 600米 - 从辊材送料的最大单板厚度3毫米 - 空气需求 6-8巴 - 抽取口直径7x80mm，1x130mm - 尺寸：长/宽/高 6650x1260x1700毫米 - 重量：1850公斤 优点 ——德国制作 – 喷雾系统 – 预铣削与角部加工 – 2个胶水罐 - 平滑进给 8-18mm – 包括4艘额外巡逻舰 ——未上色 – 原始DTR+CE文档 ——状况非 ...
Orma LS/ECO/CA 30/13 自装式压力机 工作长度 3000mm 工作宽度 1300mm 自动上料 胶粘剂应用系统 搁板用油加热至 130°C 上夹紧力 57t 侧面夹紧力 9t 生产年份 2001 CE 认证
面板长度： 3,500 mm 面板宽度： 1,300 mm 最小工件厚度： 11 mm 最大工件厚度： 60 mm Crkikw9B 最小输入长度： 300 mm 循环时间： 200 s 容量 m2/ 8h： 720 高频压力机：是 HF 发生器功率： 30 kW 涂胶单元： Yes 接缝粘合机：
该机专为各种类型的自动涂胶而设计 框架和型材用箔纸覆盖，涂漆或以其他方式完成 矩形或多边形。 中密度纤维板框架的材料粘合在一起。 该机器专门用于生产门上的相框和精加工框。 全自动工作循环。 最大板条尺寸： -宽度 120 毫米 -高度 65 毫米 -最小元件长度 250 mm -容量约100套。框架 该设备适用于热熔胶。 该设备的尺寸为 1100 x 850 x 1300 毫米。 重量 160 kg 气动系统 6 bar
我正在出售一台设备齐全的封边机 BRANDT Optimat KDF 220 C，建于 2014 年： 配置： 输入挡块可手动调节 手动可调的关节铣削 封边 EVA 胶 / PUR 胶 物料压力区可手动调节 气动可调的横切锯 顶部 + 底部半径铣削可手动调节 圆形单元 1 电机 手动可调 圆角刮刀 R2 可通过气动方式调节（包括 R1 组） 控制面板 工作高度可通过伺服电机调节 材料高度 8-50mm 封边材料厚度 0.4-3mm 进料速度 10m/min。 包括进料板的长度 4150mm 重量 1320kg 非常好的条件，功能齐全！ 包括完整文档和 CE。 可用相同
我正在销售一台设备齐全的封边机 BRANDT ProfiLine KDF 790，建于 2006 年： 配置： 输入停止可以通过菜单进行调整 手动可调的关节铣削 带预热槽的封边带 物料压力区可通过伺服电机调节 气动可调横切锯 顶部重铣刨+底部手动可调 半径铣顶+底伺服电机可调 底部的槽锯单元 圆形单元2电机伺服电机可调 刮刀半径 R2 气动可调 / 包括第二组 R1 刮刀刀片表面 抛光刷 前部分离器注入 后部清洁喷射 工作高度可通过伺服电机调节 材料高度 6-60mm 边缘材料厚度 0.4-12mm 进给速度可达20m/min。 包括进料板在内的总长度7860mm 里程状态 1,650,000 米胶合。 包括完整的文档和 CE。 条件非常好，功能齐全
我出售设备齐全的封边机SCM Olimpic S3000，建于2011年： 配置： 输入停止伺服电机可调 气动可调关节铣床 带预热罐的封边带 物料压力区伺服电机可调 横切锯气动可调 坚固的铣床可以手动调整 气动可调半径铣顶+铣削底部 圆形单元 4 电机气动可调 半径拉拔器刀片 R2 可通过气动方式关闭 绘图刀片的表面 抛光刷 热风机 前后分离器喷射 星辰控制系统控制面板 条形码阅读器 工作高度伺服电机可调 材料高度 6-60mm 边缘材料厚度0.4-12mm 进给速度可达12米/分钟。 PUR胶水可能。 包括第二个全新胶槽。 只有6，153米的胶合！机器几乎是新的。 非常好的条件，功能齐全
: 0,4 - 8 mmWorkingpiece thickness from to: 8 - 60 mmTotal length: ca. 4.930 mmFeed speed: 10 m/min.total power requirement: max. 6,1 kW kwWeight: 1.400 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The machine must be dismantled and loaded by the buyer himself. The transport and loading equipment that may be required for this purpose must be organized and provided by the buyer himself. The collection must take place by 11.12.2026 at the latest. If the machine has not been picked up by this date, it will be relocated or, if necessary, disposed of at the buyer's expense. Auction-ID: A7-51502-154
Type: wood gluing machine Year: bought second-hand in 2001 Visible model: OM 313 Use: regular application of glue to wooden parts/profiles before assembly or veneer Drive: motorized Feed: adjustable Work Table: Metal Controls: Front control panel Power supply: electric, probably three-phase Equipment: foot switch Condition: pre-owned, visible traces of use Auction-ID: A3-46110-35137
Brand: OTT Model: Pacific Plus Type: edge banding machine Connection: 380 V / 50 Hz Edge thickness: 0.3 – 15 mm Workpiece height: 8 – 60 mm Throughput speed: 12 – 18 m/min Machine length: 5,600 mm Execution and options: Professional Package Pacific Plus 18.5-inch touchscreen instead of 15-inch 2 additional swing-away support roller conveyors Automatic supply magazine for strips or solid slats PUR cleaning set with 4 nozzles and brushes Pre-equipment on ACF rounding unit for quick-change motors or automatic 3-position AKF milling Automatic 2-position scraper unit with foil compensation Equipped with R1 and R2 tools Automatic 3-position AKF milling: R1 / R2 / angled 45° Control via control panel, barcode or QR code Anti-static spray device 2 nozzles: 1 top / 1 bottom Spray device for PVC and plastic edging material Diamond roughing tool Ø85 x 62 mm Input trolley for narrow panel ...
Power: N/C (electro-pneumatic system) Operating parameters: Workpiece length 250–2,500 mm; max. width 1,200 mm; automatic longitudinal + transverse feeding; electropneumatically controlled cross scale Workpiece capacity: Panels/components of varying dimensions; suitable for furniture & wood processing lines Supported edges: Wood-based panels, MDF, chipboard, plywood (typ.) Edge types: Feeding, positioning, transfer Included equipment: Fully automatic WZ10 pulling system; air cushion table; cross alignment scale; integrated control system Compliance: Industrial woodworking equipment; CE N/C Power supply: Electric + compressed air (electro-pneumatic) Year/Manufacturer: HOMAG – PROFI TBL 100/35/12 Remarks: Designed for automatic handling and precise positioning of workpieces in longitudinal and transverse direction Automatic feeding table with WZ10 system for efficient panel transpo ...
Polishing unit without spraying at the outlet and after forming of the edges. HOLZ-HER Primus 1436 SE PVC edge banding machine Range: Primus Model: 1436 SE PVC Type: automatic edge banding / banding machine Use: application and finishing of edges on wood panels Power supply: three-phase 400 V on European configurations listed Feed speed: approx. 11 m/min Maximum panel thickness: approx. 50 mm Minimum workpiece width: approx. 60 mm Edge thickness: depending on configuration, up to approx. 8–13 mm in strips and 2–3 mm in rolls Pneumatic pressure: approx. 6 bar Indicative dimensions: L 4.5–4.7 × W 1.02–1.40 × H 1.63–1.65 m Indicative weight: approx. 1,230–1,300 kg Auction-ID: A3-46142-35224
Type: edge banding machine / edge banding machine Year of Manufacture: 2005 Serial number: 05.253.242 Power supply: 400 V – three-phase – 50 Hz Power: 2.5 kW Plate Indicated Speed: 2,450 RPM Manufacturer's plate weight: 250 kg (so I would put 250 kg rather than ±200 kg) Dimensions: approx. 180 × 65 × 110 cm CE marking Manufactured: Italy Professional machine for the laying/gluing of edges on panels, especially for carpentry and cabinetmaking. Loading possible by the seller on a trailer. The seller has the necessary equipment to load the machine onto a trailer during pick-up. Auction-ID: A3-46142-35301
: 0,4-6 mmWorkingpiece thickness from to: 6-60 mmTotal length: 3516 mmFeed speed: 10 m/min.total power requirement: kwWeight: 850 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 0,4 - 3 mmWorkingpiece thickness from to: 9 - 60 mmTotal length: - mmFeed speed: stufenlos 8 - 12 m/min.total power requirement: 15 kwDimensions (L/W/H): 4.290 x 840 x 1.690 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used automatic edge banding machine FRAVOL, Italian made, model R9 of the RAPID series. It applies PVC, ABS, melamine, veneer and solid wood edging, in strips or from the roll. A compact and sturdy machine, suitable for both industry and small workshops. The machine heats up quickly and is ready for work in 8 - 10 minutes. The pressure units are adjusted automatically, with a pressure bar with a double row of wheels. The two motors of the end trimming unit are adjustable from 0 to 15 degrees and are powered by a 200 Hz frequency converter (inverter). Technical data: Panel thickness: 10 - 60 mm Minimum panel width: 60 mm Minimum panel length: 140 mm (PVC) Edge band width: 15 - 65 mm Edge band thickness: 0.4 - 15 mm Feed rate, adjustable: 6 - 16 m/min Glue pot capacity: 3 kg Voltage: 220/380 V, 50/60 Hz, three-phase Installed power: 7.5 kW Pneumatic pressure: 6 bar Weight: 1900 kg For t ...
Used economical edge banding machine (edge bander) by Kleidara with multiple processing heads. Used for applying edge banding (melamine, PVC or wood) to panels, with gluing, cutting and trimming of the band at the panel edges. An economical option for furniture manufacturers and joinery workshops covering basic edge banding needs. Currently unchecked. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-80
Used glue spreader with rollers, for uniform glue application on wood surfaces, veneers or edges before pressing or lamination (e.g. plywood laminating, veneering). Brand, exact model and detailed technical specifications not confirmed for this specific unit — please contact us for details. Has not been used for several years, but is in operating condition Auction-ID: A7-50988-7
: 0,4-8 mmWorkingpiece thickness from to: 8-60 mmTotal length: 4930 mmFeed speed: 10 m/min.total power requirement: kwWeight: 1500 kgControl: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0.4-5 mmWorkingpiece thickness from to: 10-50 mmTotal length: 2730 mmFeed speed: m/min.total power requirement: kwWeight: 720 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0,4-5 mmWorkingpiece thickness from to: 6-45 mmTotal length: 4130 mmFeed speed: 11 m/min.total power requirement: kwWeight: 1250 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0,4-3 /8 mmWorkingpiece thickness from to: 10 - 60 mmFeed speed: 8 / 12 m/min.: Ja Flush/radius/chamfer milling units: Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0,4-3 / 10 mmWorkingpiece thickness from to: 10 - 60 mmTotal length: ca. 5.100 mm mmFeed speed: 18 m/min.total power requirement: 13 kwWeight: ca. 2.000 kgPremilling unit: Ja : Ja Flush/radius/chamfer milling units: Ja Corner rounding unit: Ja : Ja Flat scraper: Ja Spraying device: Ja Buffing unit: Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
600 € 
