生产厂家:
(品类: 207)
库珀FW 1150贴面接合器 工作宽度1150毫米 贴面厚度 0.4-3毫米 进给速度：10-30米/分钟 锯齿缝法 制造年份：1997年 CE标志 重量：520公斤 净价格
圆柱形涂胶机OSAM S2R-1300 + 圆盘台OSMA TDM 工作宽度 1300mm 最大工作高度 100mm 手动调整工作高度 2个上下胶辊 圆盘台 OSAMA TDM 1300-3000 Ce 套装制造年份 2018 套装总长560cm
Frama MDC 1300 滚涂胶机 工作宽度 1300mm 工作高度 70mm 进给速度 16.5m/min 0.3kw 进给电机 CE 认证 生产年份 1999 重量 332 千
Orma LS/ECO/CA 30/13 自装式压力机 工作长度 3000mm 工作宽度 1300mm 自动上料 胶粘剂应用系统 搁板用油加热至 130°C 上夹紧力 57t 侧面夹紧力 9t 生产年份 2001 CE 认证
面板长度： 3,500 mm 面板宽度： 1,300 mm 最小工件厚度： 11 mm 最大工件厚度： 60 mm Crkikw9B 最小输入长度： 300 mm 循环时间： 200 s 容量 m2/ 8h： 720 高频压力机：是 HF 发生器功率： 30 kW 涂胶单元： Yes 接缝粘合机：
该机专为各种类型的自动涂胶而设计 框架和型材用箔纸覆盖，涂漆或以其他方式完成 矩形或多边形。 中密度纤维板框架的材料粘合在一起。 该机器专门用于生产门上的相框和精加工框。 全自动工作循环。 最大板条尺寸： -宽度 120 毫米 -高度 65 毫米 -最小元件长度 250 mm -容量约100套。框架 该设备适用于热熔胶。 该设备的尺寸为 1100 x 850 x 1300 毫米。 重量 160 kg 气动系统 6 bar
我正在出售一台设备齐全的封边机 BRANDT Optimat KDF 220 C，建于 2014 年： 配置： 输入挡块可手动调节 手动可调的关节铣削 封边 EVA 胶 / PUR 胶 物料压力区可手动调节 气动可调的横切锯 顶部 + 底部半径铣削可手动调节 圆形单元 1 电机 手动可调 圆角刮刀 R2 可通过气动方式调节（包括 R1 组） 控制面板 工作高度可通过伺服电机调节 材料高度 8-50mm 封边材料厚度 0.4-3mm 进料速度 10m/min。 包括进料板的长度 4150mm 重量 1320kg 非常好的条件，功能齐全！ 包括完整文档和 CE。 可用相同
我正在销售一台设备齐全的封边机 BRANDT ProfiLine KDF 790，建于 2006 年： 配置： 输入停止可以通过菜单进行调整 手动可调的关节铣削 带预热槽的封边带 物料压力区可通过伺服电机调节 气动可调横切锯 顶部重铣刨+底部手动可调 半径铣顶+底伺服电机可调 底部的槽锯单元 圆形单元2电机伺服电机可调 刮刀半径 R2 气动可调 / 包括第二组 R1 刮刀刀片表面 抛光刷 前部分离器注入 后部清洁喷射 工作高度可通过伺服电机调节 材料高度 6-60mm 边缘材料厚度 0.4-12mm 进给速度可达20m/min。 包括进料板在内的总长度7860mm 里程状态 1,650,000 米胶合。 包括完整的文档和 CE。 条件非常好，功能齐全
我出售设备齐全的封边机SCM Olimpic S3000，建于2011年： 配置： 输入停止伺服电机可调 气动可调关节铣床 带预热罐的封边带 物料压力区伺服电机可调 横切锯气动可调 坚固的铣床可以手动调整 气动可调半径铣顶+铣削底部 圆形单元 4 电机气动可调 半径拉拔器刀片 R2 可通过气动方式关闭 绘图刀片的表面 抛光刷 热风机 前后分离器喷射 星辰控制系统控制面板 条形码阅读器 工作高度伺服电机可调 材料高度 6-60mm 边缘材料厚度0.4-12mm 进给速度可达12米/分钟。 PUR胶水可能。 包括第二个全新胶槽。 只有6，153米的胶合！机器几乎是新的。 非常好的条件，功能齐全
EVA Bonding System Grinding group yes Spindle moulder unit yes Operating units 9 Upper Pressure: Yes Pressure with rubberized belt Panel support guide yes Operating units in the squaring part 1 OPERATING UNITS IN THE SQUARING PART 1 Group: Grinding Automatic Time Intervention: Yes Magazine for the reel yes 2 positions Gluing system: yes hot-melt glue tank yes Pre-melter for hot-melt glue Yes Edge pressure roller conveyor assembly: yes 7 Pressure rollers with NC positioning yes Operating units in the edgebanding part 8 OPERATING UNITS IN THE EDGEBANDING PART 1 Group: trimmer Engines: 2 Automatic Time Intervention: Yes OPERATING UNITS IN THE EDGEBANDING PART 2 Group: overlapping trimmer Engines: 2 Automatic Time Intervention: Yes OPERATING UNITS IN THE EDGEBANDING PART 3 Group: edge trimmer Engines: 2 Automatic tool changer: Yes with NC positioning: yes OPERATING UNITS IN THE EDGEBANDING P ...
EVA Bonding System Min. height of the panel 8 mm Max. panel height 60 mm Min. thickness of the edge 0.4 mm Max. edge thickness 3 mm Magazine for the reel yes nr. 1 positions Gluing system: yes hot-melt glue tank yes CE marked safety regulations yes Total installed power 3 KW Auction-ID: A1-48024-4
Working area X axis 3280 (2300 for edgebanding) mm Y-axis working area 1320 (1240 for edgebanding) mm Bar worktop with suction cups Main electrospindle power 13 KW 5 controlled axes Maximum edge height 65 mm Total drilling spindles 24 Total tool change position 16 Working area X axis 3280 (2300 for edgebanding) mm Y-axis working area 1320 (1240 for edgebanding) mm Maximum workpiece throughput 180 mm Workspaces 2 Worktop: yes Bar worktop with suction cups Suction cup bars 6 Vacuum pump yes Nr. Pumps 1 Single capacity 250 m3/h DRILLING OPERATOR UNIT 1 Group: Top Spindles for vertical drilling: 16 Spindles for horizontal drilling in the X direction: 4 Horizontal drilling spindles in the Y direction: 4 Total vertical + horizontal spindles: 24 MILLING OPERATING UNITS 1 Group: Top Controlled axes: 5 Automatic tool changer: yes Liquid cooling system: Yes Motor power: 13 kw EDGEBANDING OPERATING ...
EDGETEQ S380 – Edge Banding Machine General data: Model: EDGETEQ S380 Year of manufacture: 2021 Serial number: 0-261-73-9063 Operating hours: 17486 h Condition: Very good, in working order Weight: approx. 3000 kg Dimensions (L x W x H): 2500 x 1555 x 2300 mm Description: Industrial edge banding machine designed for precise finishing of panel edges. The EDGETEQ S380 is suitable for high-quality woodworking applications, ensuring efficient and accurate processing in production environments. Additional information: For further technical data, please refer to the attached PDF file. Auction-ID: A7-40554-3
AMBITION 1650 FC EDITION – Edge Banding Machine General data: Model: Ambition 1650 FC Edition Year of manufacture: 2018 Serial number: 0-261-71-2179 Operating hours: 25189 h Condition: Very good, in working order Weight: approx. 3000 kg Dimensions (L x W x H): 2500 x 1555 x 2300 mm Description: Industrial edge banding machine designed for precise finishing of panel edges. The Ambition 1650 FC Edition ensures efficient and high-quality processing, making it suitable for demanding woodworking production environments. Additional information: For further technical data, please refer to the attached PDF file. Auction-ID: A7-40554-4
Technical data Manufacturer: BRANDT Type: KS 25 Serial number: 0-261-09-0222 Year of Make: 1990 Connection voltage: 380 V / 50 Hz Control voltage: 220 V Configuration Edge banding machine with roller conveyor / workpiece feeder, control panel, suction connections and edge material on turntable. Auction-ID: A7-47854-18
• Edgebander, edge banding machine • Edge thickness from 0,40 mm up to 25 mm • Worpiece thickness from 6 mm up to 60 mm • Minimum workpiece lenght 140 mm • Minimum workpiece width 60 mm • Adjustable feed speed from 8 m/min up to 20 m/min • Feed motor 4,40 KW • HOLZ-HER 1961 joint trimming unit, 2 x motor 2 KW-12000 rpm • Edge feeder for 1 edge coil, edge magazine for 1 edge coil • HOLZ-HER 1907 cartridge glue system with pot for granulated hot melt adhesive • HOLZ-HER 1926 K pressure group with (1+2) rollers • HOLZ-HER 1819 snipping unit, 2 x motor 0,45 KW-12000 rpm • HOLZ-HER 1962 rough trimming unit, 2 x motor 2 KW-12000 rpm • HOLZ-HER 1934 lower profile trimming unit, 2 x motor 0,45 KW-12000 • HOLZ-HER 1933 upper profile trimming unit, 2 x motor 0,45 KW-12000 • HOLZ-HER 1927 profile scraping unit • HOLZ-HER 1964 flat scraping unit • HOLZ-HER 1944 ed ...
• Edgebander • Serial number 14589/9-810 • Total installed power approx, 9 KW • Edge thickness from 0,40 mm up to 8 mm • Worpiece thickness from 6 mm up to 45 mm • Minimum workpiece lenght 180 mm • Minimum workpiece width 60 mm • Feed speed 11 m/min • Feed motor 0,75 KW • Control • HOLZ-HER 1902 edge feeder for roll, edge magazine for one edge coil • HOLZ-HER 1906 cartridge glue system • HOLZ-HER 1913 pressure group with (1+2) rollers • HOLZ-HER 1976K end trimming unit, 2 x motor 0,22 KW-9000 rpm • HOLZ-HER 1942M fine trimming unit, 2 x motor 0,60 KW-9000 rpm • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-47169-23
- Strip edge thickness from 0.40 mm to 12 mm. - Thickness of the edge in roll from 0.40 mm to 3 mm. - Thickness of the workpiece from 10 mm to 60 mm. - Variable feed rate. - IDM PC OFFICE control. - Entrance spindle moulder group. - Edge loader for slats and roll, edge tray for one roll. - Gluing unit with boiler for granulated hot melt adhesive, with prefuser. - Pressure group with (1+3) rollers. - Cross-cutting group. - Spoke profiling group. - Shape group with 2 motors. - Milling unit tiltable from 0° to 90°, 4 KW motor. - Radius scraper group. - Tail scraper group. - Group of cleaning brushes. - LEISTER hot air blower group. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47169-59
- Semi-automatic machine for the application of rubber edges with a \"T\" section on panels of different shapes and dimensions without the aid of counter-templates. - Retractable cutting device. - Applicator with vibration so as not to damage the edge surface. - Heater to facilitate application operation. - Retestador. - Total installed power 6.02 KW. - Thickness of the pieces from 10 mm to 30 mm. - Feed speed 5 m/min. - Table dimensions 1050 x 800 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47169-52
- Edge thickness from 0.40 mm to 2 mm. - Thickness of the part from 10 mm to 45 mm. - Minimum piece width 90 mm. - Feed speed 6 m/min. - Retestador group. - Spoke profiling unit. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47169-21
- Total installed power 7.26 KW. - Thickness of the workpiece from 10 mm to 60 mm. - Variable feed speed. - Control. - Gluing unit with tank for granulated hot melt adhesive. - Pressure group with (1+2) rollers. - Cross-cutting group, 2 x motors - Shape group, 2 x motors. - Scraper group. - Group of cleaning brushes. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47169-3
- Total installed power 8.80 KW. - Edge thickness from 0.40 mm to 16 mm. - Thickness of the workpiece from 10 mm to 60 mm. - Minimum length of the piece 140 mm. - Minimum width of the piece 60 mm. - Adjustable feed speed from 10 m/min to 20 m/min. - 1.50 KW advance motor. - Control. - Edge loader for slats and roll, edge tray for one roll. - Gluing unit with tank for granulated hot melt adhesive. - Pressure group with (1+2) rollers. - Cross-cutting group, 2 x 0.50 KW-12000 rpm motor. - Spoke profiling group, 2 x motor at 12000 rpm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47169-6
• Edgebander • Serial number 515/0-007 (2000) • Edge thickness in strips up to 13 mm • Edge thickness in roll from 0,40 mm up to 5 mm • Worpiece thickness from 6 mm up to 45 mm • Minimum workpiece lenght 180 mm • Minimum workpiece width 60 mm • Feed speed 11 m/min • Feed motor 1,50 KW • PLC control system • HOLZ-HER 1902 edge feeder for roll, edge magazine for one edge coil • HOLZ-HER 1906 cartridge glue system • HOLZ-HER 1912 pressure group with (1+1) rollers • HOLZ-HER 1918 end trimming unit, 2 x motor 0,22 KW-9000 rpm, tilting up to 10° • HOLZ-HER 1942 M fine trimming unit, 2 x motor 0,60 KW-18000 rpm, tilting up to 15° • HOLZ-HER 1929 profile scraping unit • HOLZ-HER 1940 edge buffing unit, 2 x motor 0,12 KW-1340 rpm • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are s ...
- Total installed power approx. 35 KW. - Strip edge thickness up to 20 mm. - Thickness of the edge in roll from 0.40 mm to 3 mm. - Thickness of the workpiece from 12 mm to 60 mm. - Minimum length of the piece 85 mm. - Power Control PC 22, WOODCOMMANDER software. - Input spindle moulding group, 2 x 3 KW-9000 rpm motor. - Edge loader for slats and roll, edge tray for one roll. - MELER B4 EVA and PUR glue melting and applicator system, MELER STARBI touch control panel. - Pressure group with (1+6) rollers. - HOMAG HL 81 cross-cutting unit, 2 x 0.80 KW-12000 rpm motor. - Straight roughing group, 2 x 1.85 KW-12000 rpm motor. - HOMAG FK 13 L500 shape group, 2 x 0.40KW motor with tool change of 8 positions each. - HOMAG MN 21 spoke scraper unit. - Tail scraper group. - Cleaning brush group, 2 x 0.18 KW-1400 rpm motor. - Operating conditions of this machine: unchecked. - This it ...
- Workpiece thickness from 10 mm to 40 mm. - Heater. - Manual retestator group. - Upper profiling group, 0.20 KW-12000 rpm motor. - New, unused machine. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47127-21
- Edge thickness from 0.40 mm to 5 mm. - Thickness of the part from 8 mm to 45 mm. - Minimum length of the piece 120 mm. - Minimum width of the piece 75 mm. - Feed speed 10 m/min. - 0.75 KW feed motor. - Control. - Edge loader for slats and roll, the tray is MISSING. - Gluing unit with tank for granulated hot melt adhesive. - Pressure group with (1+1) rollers. - Cross-cutting group, 1 x 0.20 KW-12000 rpm motor. - Spoke profiling unit, 2 x 0.55 KW-12000 rpm motor, tiltable up to 20°. - Cleaning brush group, 2 x 0.55 KW-2820 rpm motor. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47127-14
100 € 
