封边机 (25)

代码：0495 品牌：BIMATIC - 意大利 型号：BSC 263.10 - CE标准 适用于木工车间、定制家具、家具、面板和门的自动� ��边机——CE标准 技术数据： 最小/最大边缘厚度 0.4/10 毫米 最小/最大面板高度 10/60 毫米 最小面板宽度：50毫米 最小面板长度：70毫米 工作速度8/12米/分钟 面板可调节的侧面支撑转移 组成： 粘合单元：快速加热胶罐——胶罐容量3升 轧材剪切剪切 垂直端切割单元，配备2个独立电机，12000转/分时输出 0.5马力——电机可倾斜至15 可倾斜的配平单元，配备2台电机，最大功率0.75马力� �转速12000转/分 精美的精美车，配备2台发动机，0.5马力，转速12000转/ 分 边缘刮削单元 整体尺寸毫米：3145 x 725 x 1400 小时 重量：公斤810

Polishing unit without spraying at the outlet and after forming of the edges. HOLZ-HER Primus 1436 SE PVC edge banding machine Range: Primus Model: 1436 SE PVC Type: automatic edge banding / banding machine Use: application and finishing of edges on wood panels Power supply: three-phase 400 V on European configurations listed Feed speed: approx. 11 m/min Maximum panel thickness: approx. 50 mm Minimum workpiece width: approx. 60 mm Edge thickness: depending on configuration, up to approx. 8–13 mm in strips and 2–3 mm in rolls Pneumatic pressure: approx. 6 bar Indicative dimensions: L 4.5–4.7 × W 1.02–1.40 × H 1.63–1.65 m Indicative weight: approx. 1,230–1,300 kg Auction-ID: A3-46142-35224

代码：0015 品牌：FRAVOL - 意大利 型号：RAPID RX 700 - CE标准 自动电子封边机，适用于EVA - PUR聚氨酯胶水，配备研磨单元，可涂抹PVC、ABS、三聚� ��胺、单板、实心条和滚边，适用于木工车间、定制� �具、海军家具、门、面板、厨房家具、浴室家具 - CE标准 面板厚度 最小/最大毫米 10/120 面板长度最小 140 毫米 面板宽度最小 毫米 60 边缘厚度 mm 0.4 - 16 可变进料 10-20 米/分钟 自动压合机提升 组成： 触摸屏电子控制 10.7英寸彩色 受控轴进料导引 第二组进门磨床，用于完美面板磨削 - 电机 Kw 2,2 - 转速 6000 - 金刚石工具 mm 100 x 120 x 30 红外灯 0-600度 - 瓦特 600 冷却防粘喷雾系统 刃高 mm 120 自动边缘装载机 通用胶合单元，带有聚氨酯胶和EVA胶的预熔装置——� ��拆胶罐—� ...

Type: edge banding machine / edge banding machine Year of Manufacture: 2005 Serial number: 05.253.242 Power supply: 400 V – three-phase – 50 Hz Power: 2.5 kW Plate Indicated Speed: 2,450 RPM Manufacturer's plate weight: 250 kg (so I would put 250 kg rather than ±200 kg) Dimensions: approx. 180 × 65 × 110 cm CE marking Manufactured: Italy Professional machine for the laying/gluing of edges on panels, especially for carpentry and cabinetmaking. Loading possible by the seller on a trailer. The seller has the necessary equipment to load the machine onto a trailer during pick-up. Auction-ID: A3-46142-35301

零件编号8010 规格 装备： - 车牌 - 预铣削 - 磁带送料器 - 2个胶水罐：用于颗粒和弹药 - 目前机器内有热熔胶（颗粒胶） - 断头台——单板预切 - 3个压力滚轮 - 2个球切单元 - 2个用于边缘成型的铣削单元（径向铣刀） - 角球总收入 - 刮除骨料——用于去除多余胶水 - 抛光单元 - 进给速度可无限变调节 8-18 米/分钟 - 元件厚度 6-45毫米 - 最小工件长度 180mm - 最小工件宽度 600米 - 从辊材送料的最大单板厚度3毫米 - 空气需求 6-8巴 - 抽取口直径7x80mm，1x130mm - 尺寸：长/宽/高 6650x1260x1700毫米 - 重量：1850公斤 优点 ——德国制作 – 喷雾系统 – 预铣削与角部加工 – 2个胶水罐 - 平滑进给 8-18mm – 包括4艘额外巡逻舰 ——未上色 – 原始DTR+CE文档 ——状况非� ...

• Edgebander • Serial number 8667702 • Total installed power 22 KW • Edge thickness from 0,40 mm up to 3 mm • Worpiece thickness up to 50 mm • Minimum workpiece lenght 120 mm • Minimum workpiece width 120 mm • Feed motor 1,47 KW • Control • Edge magazine for one edge coil •  Gluing unit with pot for granulated hot melt adhesive • Pressure group with (1+3) rollers • End trimming unit, 1 x motor 0,37 KW-12000 rpm • Profile trimming unit, 4 x motor 0,37 KW-12000 rpm • Profile scraping unit • Edge buffing unit, 2 x motor 0,37 KW-1370 rpm • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-50834-190

边带机 Brandt 型 KDF 890 技术数据： - 描述：参见机器照片

• Edgebander • Edge thickness from 0,40 mm up to 25 mm • Worpiece thickness from 6 mm up to 60 mm • Adjustable feed speed: 8 m/min - 20 m/min • Control • Joint trimming unit, 2 x motor 2 KW-12000 rpm • Edge feeder for strips and roll, edge magazine for one edge coil • HOLZ-HER 1906 cartridge glue system • Pressure group with (1+2) rollers • End trimming unit with 2 motors • HOLZ-HER 1823 fine trimming unit, 2 x motor 0,60 KW-12000 rpm • Profile scraping unit • HOLZ-HER 1983 profile trimming unit • Edge buffing unit • Milling group, motor 3,80 KW-12000 rpm • Sanding belt unit • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-50834-84

布兰特型KDF 670封边机 技术数据： - 进气尺：手动调节 - 连接铣床单元配备2台电机，每台2.2千瓦：两台电机均 为气动控制 - 热熔胶漫画 - 压力区：配备1个主压辊和3个压后辊 - 交叉切割单元，配备2个电机，每个0.35千瓦：通过程� �自动调节，从倒角盖到直盖 - 带2台电机的边缘铣削单元，每台0.55千瓦：用于平磨� �倒角铣削或半径铣削，带有四向固定点调节以实现侧 扫 - 槽铣机单元：带水平轴 - 复制铣削单元，配备2台电机，每台035千瓦：具气动控 制进出功能 - 型材刮板装置：具气动输入和输出控制 - 平拉刀片单元 - 抛光单�

- Strip edge thickness from 0.40 mm to 12 mm. - Thickness of the edge in roll from 0.40 mm to 3 mm. - Thickness of the workpiece from 10 mm to 60 mm. - Variable feed rate. - IDM PC OFFICE control. - Entrance spindle moulder group. - Edge loader for slats and roll, edge tray for one roll. - Gluing unit with boiler for granulated hot melt adhesive, with prefuser. - Pressure group with (1+3) rollers. - Cross-cutting group. - Spoke profiling group. - Shape group with 2 motors. - Milling unit tiltable from 0° to 90°, 4 KW motor. - Radius scraper group. - Tail scraper group. - Group of cleaning brushes. - LEISTER hot air blower group. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-59

边缘厚度：0.4 - 3 毫米 工件厚度：最大50毫米 最小工件长度：150毫米 进给速度：22 m/min

Used hot-melt edge banding machine (edge bander), marked \"ΠΑΝΞΥΛ\" (Panxyl) in the seller's listing. Condition: - Used machine - Has not been operated for years; needs inspection before use Auction-ID: A7-50988-156

封边机的底盘 安装在 Homag Edgeteq S-200、KDF 1130 FC（1100 公斤）上。但它肯定也适用于其他机器，例如 Brandt（可能需要稍微调整一下） U型型材长度约1130mm 机身高度（含脚轮）约 150 毫米 4 个坚固的钢制脚轮，作为带润滑脂接头的旋转脚轮 2 刹车 2 个用于高度补偿的支撑板 该机器可以通过预约在现场进行演示。我们提供 只有准备好在我们的仓库中进行演示的机器，请参阅� ��年的其他报价”。 提供者。

- Semi-automatic machine for the application of rubber edges with a \"T\" section on panels of different shapes and dimensions without the aid of counter-templates. - Retractable cutting device. - Applicator with vibration so as not to damage the edge surface. - Heater to facilitate application operation. - Retestador. - Total installed power 6.02 KW. - Thickness of the pieces from 10 mm to 30 mm. - Feed speed 5 m/min. - Table dimensions 1050 x 800 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-52

规格： 工件厚度：最小 6 毫米 - 最大 45 毫米 边缘厚度：最大 3 毫米 进给： 8 m/min COMPOSIZIONE： Gruppo rettifica Gruppo colla Gruppo pressore Gruppo intestatore doppio Gruppo raschia colla Gruppo refilatore Gruppo arrotondatore Gruppo raschiabordo Gruppo spazzole

- Total installed power 31 KW. - Edge thickness in rolls from 0.4 mm to 3 mm. - Edge thickness in rolls from 0.4 mm to 25 mm. - Thickness of the workpiece from 10 mm to 60 mm. - Variable feed speed from 10 m/min to 25 m/min. - PC Office control. - Input spindle moulding group, 2 x 4 Kw-12000 rpm motor. - Edge loader for 1 roll. - Gluing unit with boiler for granulated hot melt adhesive, with prefuser. - Pressure group with (1+6) rollers. - Cross-cutting group with 2 motors of 0.35 KW-12000 rpm. - Straight roughing group, 2 x 1.03 KW-12000 rpm motor. - Spoke profiling group, 2 x 0.55 KW-12000 rpm motor, tiltable up to 45°. - Spoke profiling group, 2 x 0.35 KW-12000 rpm motor, tiltable up to 45°. - Shape group with 4 motors of 0.35 KW-12000 rpm, with quick release of the motors. - Radius scraper group. - Tail scraper group. - Cleaning brush group, 2 x 0.30 KW-1500 rpm m ...

自动封边机 型号 STEFANI MONOBETA 4000 二手机 带说明书 用于 PVC、单板、三聚氰胺、ABS、薄实木条的封边 用于家具、家具、厨房、浴室、门、面板和各种 XILIA 定位系统 技术数据 ： 可倾斜涂胶组：0 / 7 涂胶板最小高度 mm.10 涂胶板最大高度 mm.60 最小厚度 轧辊边缘 mm.0.4 最大厚度 轧辊边缘 mm.3 最大厚度 木边 mm.25 最小面板宽度 mm.60 最小面板长度 mm.110 可调进给速度：从 8 到 22 米/分钟。 电动压力升降机 大型面板的伸缩式支撑 隔音舱 组成： 1. 带胶槽的涂胶组 2. 压辊 3. 边缘进料器 4. 用于前后垂直切割多余边缘的端部切割装置 - n.2 电机 0,44 Kw 在 12000 rpm 5. 带有重叠电机的修整装置，用于修整多余边缘的上部� ��下部 - 2 个 0.55 Kw 的 12000 电机 此外，还提供 N.02 � ...

- Total installed power 8.80 KW. - Edge thickness from 0.40 mm to 16 mm. - Thickness of the workpiece from 10 mm to 60 mm. - Minimum length of the piece 140 mm. - Minimum width of the piece 60 mm. - Adjustable feed speed from 10 m/min to 20 m/min. - 1.50 KW advance motor. - Control. - Edge loader for slats and roll, edge tray for one roll. - Gluing unit with tank for granulated hot melt adhesive. - Pressure group with (1+2) rollers. - Cross-cutting group, 2 x 0.50 KW-12000 rpm motor. - Spoke profiling group, 2 x motor at 12000 rpm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-6

自动封边机 型号 BIESSE AKRON 245 二手机 CE 法规 ： 是 带说明书 用于木材、PVC、单板、三聚氰胺、ABS 的封边条，用于家具、家具、厨房、浴室、门、面板� ��各种 NC 321 电子定位器 技术数据 ： 涂胶板最小高度 mm.10 涂胶板最大高度 mm.45 最小厚度 轧辊边缘 mm.0.4 最大厚度 轧辊边缘 mm.3 最大厚度 木边 mm.8 最小面板宽度 mm.50 最小面板长度 mm.150 进给速度 电机功率 Hp 2 电动压力升降机 大型面板的伸缩式支撑 隔音舱 组成： 带胶槽的涂胶组 压辊 边缘给料机 用于前后垂直切割多余边缘的端部切割装置 - N.2 电机 带有重叠电机的修边装置，用于修整多余边缘的上部� ��下部 - n. 2 电机 用于最后修边的倾斜修边装置 - n. 2 电机 用于清洁胶水残留物的刮胶器组 用于刷� ...

- Edge thickness from 0.40 mm to 2 mm. - Thickness of the part from 10 mm to 45 mm. - Minimum piece width 90 mm. - Feed speed 6 m/min. - Retestador group. - Spoke profiling unit. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-21

该机专为各种类型的自动涂胶而设计 框架和型材用箔纸覆盖，涂漆或以其他方式完成 矩形或多边形。 中密度纤维板框架的材料粘合在一起。 该机器专门用于生产门上的相框和精加工框。 全自动工作循环。 最大板条尺寸： -宽度 120 毫米 -高度 65 毫米 -最小元件长度 250 mm -容量约100套。框架 该设备适用于热熔胶。 该设备的尺寸为 1100 x 850 x 1300 毫米。 重量 160 kg 气动系统 6 bar�

• Edgebander, edge banding machine • Edge thickness from 0,40 mm up to 25 mm • Worpiece thickness from 6 mm up to 60 mm • Minimum workpiece lenght 140 mm • Minimum workpiece width 60 mm • Adjustable feed speed from 8 m/min up to 20 m/min • Feed motor 4,40 KW • HOLZ-HER 1961 joint trimming unit, 2 x motor 2 KW-12000 rpm • Edge feeder for 1 edge coil, edge magazine for 1 edge coil • HOLZ-HER 1907 cartridge glue system with pot for granulated hot melt adhesive • HOLZ-HER 1926 K pressure group with (1+2) rollers • HOLZ-HER 1819 snipping unit, 2 x motor 0,45 KW-12000 rpm • HOLZ-HER 1962 rough trimming unit, 2 x motor 2 KW-12000 rpm • HOLZ-HER 1934 lower profile trimming unit, 2 x motor 0,45 KW-12000 • HOLZ-HER 1933 upper profile trimming unit, 2 x motor 0,45 KW-12000 • HOLZ-HER 1927 profile scraping unit • HOLZ-HER 1964 flat scraping unit • HOLZ-HER 1944 ed ...

赫布洛克 封边机 封边机 铣边机 加热 上�

封边�

机器仍�