sumitomo shi demag 사출 성형기 사용 판매를 위해

This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Contact us for more information.

This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine.

This SUMITOMO SHI DEMAG El-Exis SP 350/820-920 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 40 mm and a clamping force of 3,500 kN. It has operated for 17,716 hours with 12,440,761 cycles, ensuring extensive production capabilities. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 350/820-920 electrical injection moulding machine. Contact us for more information.

This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information.

This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for sale.Contact us for more information.

This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. Its an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information.

This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. Its an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information.

BEING NEGOTIATED Sumitomo Demag 280 ton Systec SP 280/630-840 year of manufacture 2014 280 Ton Clamp 2800kn Tie Bar Dist 630 Injection unit 840 Made in Schwaig, Germany 400v 50hz Exworks South America

Plastic injection molding machine SUMITOMO DEMAG C75 – Year 2008 Sumitomo Demag C75 model, year 2008.

Key data: 500 kN

Sumitomo Demag IntElekt 50/370-200 / Electric Machine Year of Make: 2009 Injection unit: Screw diameter: 35 mm Injection weight: 128 g Spray pressure: 1466 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 370x370 mm Size of the clamping plates: 520x570 mm Ejector: electric Clamping unit: toggle lever Control: NC5 - Touch Screen Additional equipment: Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air Valve x 4 Control with hot runners Hardened injection unit - Bimetal Central lubrication It is possible to change the screw diameter Dimensions: Weight: 4750 kg Length/Width/Height: 4.20x1.26x1.84 m Drive: Heating capacity: 5.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected ...

Key data: 1000 kN

Sumitomo Demag Systec 100/420-310 with the Sepro SR SDR11 S3 TRANS robot / hybrid machine Year of Make: 2013 Injection unit: Screw diameter: 35 mm Injection weight: 149 g Spray pressure: 2024 bar Dosing volume: 168 ccm Clamping unit: Clamping force: 100 t Spar spacing: 420x420 mm Size of the clamping plates: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air Valve x 2 Hydraulic core pull x 1 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Built-in printer Machine has been regularly serviced by the authorized service Sumitomo Demag Robot Sepro SR SDR11 S3 TRANS Year of Make: 2013 5-axis robot: 3 axes are driven by servo motors (el ...

Key data: 3500 kN

Sumitomo Demag Systec 350/720-2300 / Production line with the Wittmann-Demag DR833 robot Year of Make: 2012 Injection unit: Screw diameter: 70 mm Injection weight: 1103 g Spray pressure: 1877 bar Dosing volume: 1212 ccm Clamping unit: Clamping force: 350 t Tiebar spacing: 720x720 mm Size of the clamping plates: 1040x1060 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull controlled with proportional valve x 1 Control with hot runners x 5 Hardened injection unit - Bimetal Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable power Built-in printer Machine has been regularly serviced by the authorized service Sumitomo Demag Robot Wittmann-Demag DR833 Year of Make: 2011 4-axi ...

Key data: 3500 kN

Sumitomo Demag Systec 350/720-2300 / Production line with the Wittmann-Demag DR853 robot Year of Make: 2015 Injection unit: Screw diameter: 70 mm Injection weight: 1103 g Spray pressure: 1877 bar Dosing volume: 1212 ccm Clamping unit: Clamping force: 350 t Tiebar spacing: 720x720 mm Size of the clamping plates: 1040x1060 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Euromap 67 Robot interface Control with air valve Control with hot runners x 5 Hardened injection unit - Bimetal Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable power Built-in printer Machine has been regularly serviced by the authorized service Sumitomo Demag Robot Wittmann-Demag DR853 Year of Make: 2016 6-axis robot: 5 axes are driven by servo motors (electric) ...

Sumitomo Demag injection molding machine Systec multi 210/580-430h/200r 2021 Wittmann Robot W822 Z:2500/Y:1400/X:550 2021

Sell some machines from our warehouse

Demag hose pouring machine type: Ergotech 330-840 systems control: NC 4 construction year: In 1998 Schliesseinheit Schliesskraft t: 330 cross-beam measures mm: 815 x 735 installation height min / max. mm: 330830 record sizes: 1040 x 950 hose unity snail diameter mm: 60 hose weights gr: 560 hose volumes cm?: 636 hose pressure cash: 1351 mass and weights dimensions LxBxH m: 6.5 x 1.9 x 2.2 machine weights kg: 14500

Key data: 4200 mm, 1090 , 70

Screw diameter: 70 mm Injection weight in polystyrene: 1090 g Clamping force: 4200 kN Screw diameter: 70 mm Stroke volume: 1212 cm³ Injection weight in polystyrene: 1090 g/hp Injection pressure: 1,877 bar Clamping force: 420 t Lights Tie bar spacing H x V: 810 x 710 mm Tool installation height - min.: 380 mm Opening distance: 710 mm Microprocessor control: NC4 Screen text: German Operating instructions: German FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- Pump drive power: 45 kW Total connected load: 82.4 kW Total weight: 20,000 kg Total size: 7.9 x 2.3 x 2.5 m Payment terms: 100 % before taking over the machine, net only

Key data: 3500 mm, 810 , 60

Screw diameter: 60 mm Injection weight in polystyrene: 810 g Clamping force: 3500 kN Screw diameter: 60 mm Stroke volume: 891 cm³ Injection weight in polystyrene: 810 g/hp Injection pressure: 2,420 bar Clamping force: 350 t Lights Tie bar spacing H x V: 720 x 720 mm Tool installation height - min.: 350 mm Opening distance: 730 mm Microprocessor control: NC5 Screen text: German Operating instructions: German FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- Pump drive power: 55 kW Total connected load: 78.1 kW Total weight: 17,300 kg Total size: 7.4 x 2.0 x 2.4 m Payment terms: 100 % before taking over the machine, net only

Molding machine of Mag Type: Ergotech 100-430, El Exis control: NC 4 year of construction: 2000 Clamping unit Clamping force t 100 Gap mm: 445 Holm dimension mm: min/max height of 420 x 420 mm: 460 / 560 Plate size: 690 x 660 injection unit Screw diameter mm: Gr 40 injection weight: 210 Injection volume cm m³: 231 Spray pressure bar: 1855 Dimensions and weights Dimensions Lxwxh m: 5 x 1.6 x 2 machine weight kg: 6900 Miscellaneous 1 Core pull of armored snail

Molding machine of Mag Type: Ergotech 100-310 compact control: NC 4 year of construction: 1997 Clamping unit Clamping force t 100 Gap mm: 500 Holm dimension mm: 420 x 420 min/max height mm: 250 Plate size: 590 x 590 Injection unit Screw diameter mm: 35 Injection weight gr: 149 Injection volume cm m³: 168.3 Spray pressure bar: 2640 Dimensions and weights Dimensions Lxwxh m: 4.4 x 1.4 x 1.8 machine weight kg: 4400 Miscellaneous EUROMAP 12,Pneumatikventil

Molding machine of Mag Type: Ergotech 100-400 Viva control: NC 4 year of construction: 1998 Clamping unit Clamping force t 100 Gap mm: 500 Holm dimension mm: 400 x 400 min/max height mm: 250 /. Plate size: 580 x 580 Injection unit Screw diameter mm: Gr 40 injection weight: 205 Injection volume cm m³: 231.1 Spray pressure bar: 1828 Dimensions and weights Dimensions Lxwxh m: 4.25 x 1.27 x 1.79

Molding machine of Mag Type: Ergotech 50-200 Control Panel: NC 4 year of construction: 1993 Clamping unit Clamping force t 50 Gap mm: 400 Holm dimension mm: 320 x 320 min/max height mm: 210 Plate size: 530 x 540 Injection unit Screw diameter mm: Gr 25 injection weight: 54 Injection volume cm m³: 61.3 Spray pressure bar: 2740 Dimensions and weights Dimensions Lxwxh m: 3.7 X 1.4 X 1.7 machine weight kg: 3250 Miscellaneous HEATING CHANNEL CONTROL 4 COMPARTMENT

Molding machine of Mag Type: Ergotech 60/420-310 system control: NC 4 year of construction: 1999 Clamping unit Clamping force t 60 Gap mm: 450 Holm dimension mm: 420 x 420 min/max height mm: 250 Plate size: 600 x 600 Injection unit Screw diameter mm: 35 Injection weight gr: 149 Injection volume cm m³: 168 Spray pressure bar: 2020 Dimensions and weights Dimensions Lxwxh m: 4.1 x 1.36 x 1.8 machine weight kg: 3.950 Miscellaneous 1 x 2 battery pump system

Molding machine of Mag Type: Ergotech 25-80 compact control: NC 4 year of construction: 1994 Clamping unit Clamping force t 25 Gap mm: 350 Holm dimension mm: 280 x 280 min/max height mm: 105 /. Plate size: 390 x 390 Injection unit Screw diameter mm: Gr 22 injection weight: 37 Injection volume cm m³: 42 Injection pressure bar: 2061 Dimensions and weights Dimensions Lxwxh m: 3 x 1.05 x 1.9 machine weight kg: 1550

emag injection molding machine Type: Ergotech 80-310 compact control: NC 4 year of construction: 1994 Clamping unit Clamping force t 80 Injection unit Screw diameter mm: 35 Injection weight gr: 149 Injection volume cm m³: 168.3 Spray pressure bar: 2020 Dimensions and weights Dimensions Lxwxh m: 3.9 x 1.4 x 1.9 machine weight kg: 3600

Molding machine of Mag Type: Ergotech 650-8000 system control: NC 4 year of construction: 1998 Clamping unit Clamping force t: 650 gap mm: 930 Min/max height mm: 450/950 injection unit Screw diameter mm: 110 Injection weight gr: 3930 Injection volume cm m³: 4372 Spray pressure bar: 1815 Miscellaneous 4 core pull 2 pumping sytems

Injection molding machine Type: Ergotech 250-1450 system control: NC 4 year of construction: 1996 Clamping unit Clamping force t: 250 gap mm: 675 Holm dimension mm: 560 x 560 min/max height mm: 310 Plate size: 830 x 830 injection unit Screw diameter mm: Gr 70 injection weight: 940 Injection volume cm m³: 1039 Spray pressure bar: 1400 Dimensions and weights Dimensions Lxwxh m: 5.7 x 1.7 x 2 machine weight kg: 11.200 Miscellaneous Two pump system EUROMAP 12 2 core pull

Injection molding machine Type: Ergotech 35-115 Viva control: NC4 year: 2003 Clamping unit Clamping force t 35 Gap mm: 350 Holm dimension mm: 280 x 280 min/max height mm: 180 Plate size: 410 x 410 injection unit Screw diameter mm: 30 Injection weight gr: 80 Injection volume cm m³: 88 Spray pressure bar: 1393 Dimensions and weights Dimensions Lxwxh m: 3.3 x 1.05 x 1.94 machine weight kg: 1600

Molding machine of Mag Type: Ergotech, 150/500-840 concept control: NC 4 year of construction: 2001 Clamping unit Clamping force t Gap 150 mm: 500 Holm dimension mm: 500 x 500 min/max height mm: 275 / 585 Plate size: 1085 x 1185 injection unit Screw diameter mm: 50 Injection weight gr: 402 Injection volume cm m³: 442 Spray pressure bar: 1946 Dimensions and weights Dimensions Lxwxh m: 5.2 x 1.6 x 2.1 machine weight kg: 7,800

Injection molding machine Type: Ergotech 330-2300 system control: NC 4 year of construction: 1998 Clamping unit Clamping force t 330 Gap mm: 675 Holm dimension mm: 710 x 630 min/max height mm: 330 / 830 Plate size: 1040 x 950 injection unit Screw diameter mm: Gr 80 injection weight: 1430 Injection volume cm m³: 1583 Spray pressure bar: 1437 Dimensions and weights Dimensions Lxwxh m: 6.5 x 2 x 2.1 machine weight kg: 16,000 Miscellaneous Two pump system EUROMAP 12 2 core pull

Molding machine of Mag Type: Ergotech 420/800-3300 system control: NC 4 year: 2000 Clamping unit Clamping force t 420 gap mm: 710 Holm dimension mm: 810 x 710 min/max height mm: 820 / 940 Plate size: 1200 x 1100 injection unit Screw diameter mm: Gr 80 injection weight: 1600 Injection volume cm 3: 1779 spray pressure bar: 1855 Dimensions and weights Dimensions Lxwxh m: 7.8 x 2.2 x 2.4 machine weight kg: 21000 Miscellaneous 4 core EUROMAP 12

Molding machine of Mag Type: Ergotech 250-1450 system control: NC 4 year of construction: 1996 Clamping unit Clamping force t Gap between 250 mm: 575 Holm dimension mm: 560 x 560 min/max height mm: 660 / 760 Plate size: 830 x 830 injection unit Screw diameter mm: Gr 70 injection weight: 940 Injection volume cm 3: 1039 spray pressure bar: 1400 Dimensions and weights Dimensions Lxwxh m: 5.7 x 1.7 x 2.2 machine weight kg: 11200 Miscellaneous 2 core EUROMAP 12

Molding machine of Mag Type: Ergotech 100-430 system control: NC 4 year of construction: 1999 Clamping unit Clamping force t 100 gap mm: 500 Holm dimension mm: 400 x 400 min/max height mm: 250 / 750 Plate size: 590 x 590 injection unit Screw diameter mm: Gr 40 injection weight: 205 Injection volume cm 3: 231 spray pressure bar: 2020 Dimensions and weights Dimensions Lxwxh m: 4.4 x 1.4 x 1.8 machine weight kg: 4400 Miscellaneous EUROMAP pull 12, 1 core

Demag Ergotech Viva 800-400 (144) Description without funnel General Information SKU: 144 Availability: In stock Year of construction: 2001 Brand: Demag Specifications Injection weight: 205 g Clamping force: 800 kN Screw diameter: 40 mm Spray pressure: 1830 bar Tie bar spacing: 400 x 400 mm Clamping plate size: 590 x 580 mm Tool installation height min.: 250 mm Control: NC4 Language: German Power: 26.1 kW Operating hours: 70180 h Weight: 3600 kg Dimensions: 4.35 x 1.7 m Funnel: No Core train: Yes

Key data: 13000 , 4200 , 110

Screw diameter; 110 mm Injectable volume: 4370 cm3 Injection pressure: 1815 bar Column width: 1500 x 1200 mm Mould thickness min: 700 mm max: 1400 mm Opening stroke: 1500 mm Cores: 4 Robot Interface: Yes Options: Retractable column

Catalog No. : 7418 Type: Concept 420/810-2300 Producer: Demag Made in: 2006 Characteristic: Clamping force: 420 t Closing force: 4200 kN Screw diameter: 70 mm Injection capacity: 891 cm³ Injection weight: 800 g Height of the plate for mounting the mold: 1200 mm Width of the plate for mounting the mold: 1100 mm Distance between the columns (horizontal): 800 mm Distance between the columns (vertical): 710 mm Maximum injection pressure: 1877 bar Mold height: 820 mm Machine length: 7800 mm Machine width: 2200 mm Machine height: 2400 mm Weight of the injection molding machine: 20000 kg

Spare parts for Demag injection moulding machines The parts are 100% original and functional, and above all, much cheaper than new parts • Control units •Screens • Pressure transducer • Smart cards •Modules •Power supplies •Switches •Keyboard • Temperature controllers • Amplifier Cards •Transducers • Pressure switches • Hydraulic motors • Hydraulic pumps •Manometers • Oil coolers • Proportional valves • Safety valves • Directional valves • Water faucets

Key data: 3500 , 1212 , 70

Screw diameter; 70 mm Injectable volume / Shot volume: 1212 cm3 Injection pressure: 1877 bar Column passage / Bettween tie bar: 810 x 710 mm Mould tickness thickness: 380 mm max: 820 mm Opening stroke: 710 mm Core Pulling: 2 Robot interface: yes / Yes E67 Options:

DEMAG ERGOTECH VIVA 800-400 injection moulding machine was built in 2001 in Germany by Demag Kunstofftechnik (currently Sumitomo (SHI) Demag Plastics Machinery GmbH). This highly efficient machine is used for the economic production of plastic parts of different colours, shapes and sizes. These parts are produced using the reliable injection moulding method, which involves feeding plasticised plastic into a mould and then clamping it with high press force. The machine’s high-performance components, including a precision mould clamping system operating at a maximum force of 80 tonnes, ensure high repeatability of the manufactured products. The DEMAG injection moulding machine weighs 3750 kg. Technical specifications of the DEMAG ERGOTECH VIVA 800-400 injection moulding machine - maximum mould clamping force: 80 t (800 kN) - screw diameter: 35 mm - maximum injection weight PS: 157  ...

Clamping force: 350kN, tie bar distance: 280mm/280mm, platen dimensions X/Y: 410mm/410mm, min. mold installation height: 180mm, max. opening stroke: 350mm, max. platen distance: 530mm, screw diameter: 22mm, shot volume: 47.5cm³, shot weight (PS): 41g, injection pressure: 2440bar, control: NC4, heating power: 6.3kW. Machine dimensions X/Y/Z: approx. 3100mm/1100mm/1600mm, weight: approx. 1800kg. On-site inspection is possible.

Various injection molding machines are available. 1) Arburg Allrounder 420 A 1000-400, clamping force: 100t, screw diameter: 30/35mm, year of manufacture: 2005. 2) Demag 1000-420-310 EL-Exis S, clamping force: 100t, screw diameter: 30mm, year of manufacture: 2003. 3) Demag 1000-420-200 EL-Exis S, clamping force: 100t, screw diameter: 25mm, year of manufacture: 2003. 4) Arburg 570 C 2000-150/60 2K, clamping force: 200t, screw diameter: 25/12+15mm, year of manufacture: 2007. 5) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 35mm, year of manufacture: 1996. 6) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30/25mm, year of manufacture: 1995. 7) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30mm, year of manufacture: 1994. 8) Netstal Synergy 600-110, clamping force: 60t, screw diameter: 25mm, year of manufacture: 2001. 9) Arburg 900T 800-150, clampi ...

DEMAG ERGOTECH EXTRA 80-430 injection moulding machine was built in 2003 in Germany by Demag Ergotech Wiehe GmbH (now Sumitomo (SHI) Demag Plastics Machinery GmbH). The machine is designed for the economic production of plastic parts of different colours, shapes and sizes, using the injection moulding method. This method involves feeding plasticised plastic into a mould and then clamping it with high press force. The machine’s high-performance components, including a precision mould clamping system operating at a maximum force of 80 tonnes, guarantee high repeatability of the manufactured parts. The DEMAG ERGOTECH 80-430 EXTRA injection moulding machine weighs 3600 kg. Technical specifications of the DEMAG ERGOTECH EXTRA 80-430 injection moulding machine - maximum mould clamping force: 80 t (800 kN) - screw diameter: 40 mm - screw length/diameter ratio: 20 L/D - maximum injectio ...

Presse à injecter DEMAG ERGOTECH 330 T en bon état? Référence : Ergotech E330-1450-NC4S? Année: 1998? 65 000 heures de fonctionnement ? Diamètre vis : 70 mm? Rapport L/D : 20? Volume injectable : 1039 cm3? Poids injectable en PS : 940 gr? Pression d'injection : 1400 bars? Course de dosage maxi : 270 mm?P uissance de chauffe : 27 KW? Dimensions des plateaux : 1040 x 950 mm? Distance entre colonnes : 710 x 630 mm? Epaisseur moule : 330 - 710 mm? Course d'ouverture maxi : 675 mm + Robot SEPRO type 3031 YN MPA II? axe X : 2500 mm? axe Y : 800 mm? axe Z : 1400 mm Dimensions de la machine : 6,50 x 2,00 x 2,30 m? Poids de la machine : 14 300 kg

B&A REF: 9164 TON: 80 SCREW DIAMETER: 40MM SHOT WEIGHT: 208 STROKE VOLUME: 231CM3 INJECTION PRESSURE: 2025AR PLATEN SIZES: 590 X 580MM DBTB: 400 X 400MM MIN MOULD HEIGHT: 250MM MOULD OPENING STROKE: 450MM MAX DAYLIGHT: 250MM EJECTOR STROKE: 150MM CONTROLS: NC4 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 15 HEATING CAPACITY: 11KW SCREW DRIVE: HYDRAULIC

2 x Injection moulding machines Demag 1000 420 310 El Exis S Bj 2003

Demag Ergotech EXTRA 50-200 BJ2005 for sale/scrapping, but the control is already missing here.Enclosed you will find the photos and technical data of the machine for sale with BJ 2005. The machine currently has a plasticizing unit with 25mm screw (BJ 2014) installed, we sell the original plasticizing unit with 30mm screw that is still working for the machine. The machine worked until it was taken out of service, we installed the control system on another machine.

Injection moulding machine Sumitomo Demag IntElect 150/520-610, built in 2007 (without the handling / temperature control units / material supply [hopper, conveyor]). Sumitomo Demag IntElect 150/520-610 Operating hours: 29,125 26,530 Cycle counter 3,562,329

Injection moulding machine Sumitomo Demag IntElect 210/580-1000, built in 2009 (without the handling / temperature control units / material supply [hopper, conveyor]). Sumitomo Demag IntElect 210/580-1000 Operating hours: 27,297 25,717 Cycle counter 3,450,308

4 x Demag injection moulding machines Demag 80 to BJ 2005 Demag 420 to BJ 2003 Demag 420 to BJ 2005 Demag 420 to BJ 2008

Key data: 3500 kN, 70 mm

DEMAG Ergotech 350/710-2300 Concept • Clamping Force: ~3,500 kN (≈350 ton) • Injection Unit: • Screw Diameter: typically 70 mm • Injection Volume: ~1,212 cm³ • Injection Pressure: up to ~1,877 bar • Tie Bar Spacing: ~710 × 630 mm • Plate Dimensions: ~710 mm plate width • Opening Stroke: ~675 mm

Screw diameter: 70 mm Injectable volume Shot volume: 5598 cm3 Injection pressure : 1137 bar Column pass-through: 1060 x 1060 mm Moulded thickness / Mold tickness mini -max: 350 - 1100 mm Opening stroke: 1150 mm Euromap 12 4 hydraulic cores - 4 cOREPULLING

Screw diameter: 45 mm Injectable volume / Shot volume: 358 cm3 Injection Pressure: 2426 bar Column passage / Bettween tie bar: 720 x 720 mm Thickness of the mould mini /Mold tickness -max: 320 - 725 mm Opening stroke: 730 mm Euromap 12 4 hydraulic cores - 4 corepulling

This DEMAG Ergotech System 420-1450 was manufactured in 2004. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this DEMAG Ergotech System 420-1450 hydraulic injection moulding machine. Contact us for more information.

This DEMAG Ergotech System 200-610 hydraulic injection moulding machine was manufactured in 1997. Its a robust option for efficient plastic processing tasks. Contact us for more information.

This DEMAG Ergotech Compact 125-440 hydraulic injection moulding machine was manufactured in 1998. Contact us for more information.

Key data: 1000 , 3420 , 110

DEMAG SUMITOMO ERGOTECH 1000 T Injection Molding Machine - Year 2001 Machine with very low working hours Type: 1000-8000 NC4 Clamping Force: 1000 T / 10 000 KN Screw Diameter: 110 mm Theoretical Injection Volume: 3801 cm³ Injection weight. : 3420 gr Opening Stroke: 1250 mm Daylight : 2450 mm Distance Between Tie bar : 1400 x 1120 mm Platen Dimensions: 1950 x 1670 mm Mold tickness min/max : 500 /1200 mm Total Installed Power: 110 kW Oil Capacity: 2000 L Dimensions: 13.2 m x 3,20 m x 2,90 m Weight: 63 tons Machine sold with a STAR robot

This DEMAG Concept 420/810-2300 Injection moulding machine was manufactured in the year 2006 in Germany. It is equipped with a Ergo control unit. The machine has a screw diameter of 60 mm, a stroke volume of 891 cm³, a injection pressure of 2420 bar, a shot weight of 800 g/PS and clamping force of 4200 kN. The distance between bars are 800x710 mm and the size of mould platens 1200x1100 mm.

This DEMAG Systec 210/580-840 was manufactured in 2019. Its a hydraulic injection moulding machine with a clamping force of 210 tons and a power output of 60 kW. It has been used for 31,132 operating hours. Consider the opportunity to buy this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for more information.

Key data: 250 kN

Demag Ergotech Compact 250-80 Year of Make: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g Spray pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: Clamping force: 25 t Tiebar spacing: 280x280 mm Size of the clamping plates: 410x410 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air Valve x 2 Hydraulic core pull x 1 Hardened injection unit - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2600 kg Length/Width/Height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7.5 kW Heating capacity: 3.7 kW Total power: 11.2 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. ...

Key data: 800 kN

Demag Ergotech System 80/420-430 Year of Make: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Spray pressure: 2020 bar Dosing volume: 231 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 3 Control with hot runners Hardened injection unit - Bimetal Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Length/Width/Height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

B&A REF: 9291 TON: 160 SCREW DIAMETER: 50MM SHOT WEIGHT: 402 STROKE VOLUME: 442CM3 INJECTION PRESSURE: 1946AR PLATEN SIZES: 770 X770MM DBTB: 520 X 520MM MIN MOULD HEIGHT: 275MM MAX MOULD HEIGHT: 585MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 1085MM EJECTOR STROKE: 160MM CONTROLS: NC5 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 22 SERVO DRIVE HEATING CAPACITY: 14.8KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC

This DEMAG ET 330 - 1450 hydraulic injection moulding machine was manufactured in 1995. It features a clamping force of 3300 kN and a screw diameter of 60 mm, providing robust performance for various applications. The machine includes a Wittmann W322-121 linear robot for enhanced automation. Consider the opportunity to buy this DEMAG ET 330 - 1450 hydraulic injection moulding machine. Contact us for further details.

This DEMAG ET60-200 concept hydraulic injection moulding machine was manufactured in 2003. It features a clamping force of 600 kN and a maximum mold weight of 580 kg. The machine includes a robust injection unit with a screw diameter of 30 mm and an injection pressure of 1900 bar. Consider the opportunity to buy this DEMAG ET60-200 concept hydraulic injection moulding machine. Contact us for further details.

This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2500 kN and a locking force of 2750 kN. The machine includes a Wittmann linear robot and supports a maximum mold weight of 3300 kg. Its equipped with a screw diameter of 60 mm and offers a shot volume of 636 ccm. Consider the opportunity to buy this DEMAG ET250/630-840 Concept hydraulic injection moulding machine. Contact us for more information about this machine.

Presse à injecter DEMAG ERGOTECH 110 T Type : 110/470-430 Année: 2003 Force de fermeture : 110 T / 1100 KN Diamètre vis : 40 mm Volume injectable : 231 cm3 Pression d’injection : 2200 bars Entre colonnes : 470 x 470 mm Dimensions des plateaux : 620 x 670 mm Épaisseur moule min: 200 mm Course d'ouverture: 600 mm Poids : 5600 kg Dimensions : 4,70 x 2,00 x 1,50 m

DEMAG Sumitomo SYSTEC 210-840 Clamping Force: 210 T / 2100 kN Year: 2009 Screw Diameter: 50 mm Injection Volume: 442 cm³ Polystyrene Mold Weight: 402 g L/D Ratio: 20 Injection Pressure: 1946 bar Distance Between Tie bar: 580 x 580 mm Platen Dimensions: 860 x 860 mm Mold Thickness Min / Max: 340 / 690 mm Opening Stroke: 575 mm Weight: 9.6 T Dimensions: 6.0 x 1.70 x 2.0 m

Key data: 600 kN, 94 g/PS, 30 mm

Clamping force: 60t Year of Make: 2001 Injection weight in hp: 94g Injection Unit .../200 Screw diameter 30 mm Spec. Spray pressure 1995 bar Injection volume 106 cc Injection weight in hp 94 g L/D Screw Ratio 20 Clamping unit 600/... Clamping force 60 t Size of the clamping plates 600 x 600 mm Lights spar spacing 420 x 420 mm Tool installation height 200 mm Opening way 550 mm Max. panel spacing 750 mm Weight 3950 kg Dimensions(m) LxWxH 4.2 x 1.4 x 2.0 m Year of construction 2001 Control type NC4

Key data: 600 kN, 94 g/PS, 30 mm

Clamping force: 60t Year of Make: 2001 Injection weight in hp: 94g Injection Unit .../200 Screw diameter 30 mm Spec. Spray pressure 1995 bar Injection volume 106 cc Injection weight in hp 94 g L/D Screw Ratio 20 Clamping unit 600/... Clamping force 60 t Size of the clamping plates 600 x 600 mm Lights spar spacing 420 x 420 mm Tool installation height 200 mm Opening way 550 mm Max. panel spacing 750 mm Weight 3950 kg Dimensions(m) LxWxH 4.2 x 1.4 x 2.0 m Year of construction 2001 Control type NC4

Spare parts for injection moulding machines Arburg, Demag, Krauss Maffei, Battenfeld, Ferromatik, Boy, Engel Demag, Arburg and Krauss Maffei Valves / Proportional Valves Krauss Maffei / Rexroth MNR R900972653 + R900703217 + ZDR 6 DP0-45_40YM W80 MNR R900323180 Krauss Maffei 4WRAP-6 W7-02-21=24K4/M-561=KM / 6250961 00559499 / 00559137 Krauss Maffei 6252527 00559085 Krauss Maffei / Bosch 0 811 402 511 Krauss Maffei SDDB-3-PP-6 S520 + 6252570 Krauss Maffei 6253211 + SDDB-3-PP-6 S520 Arburg 4WRE 10 EA32-13/24Z4/M-425 Nr.41447 Arburg DBETB-10/180 41446 Arburg DBETB-10/25 41494 Arburg HS 1171-X168 176407 Arburg HS 1171-X112 160576 Arburg LS 1171 X112-10 / 83.745 Arburg Mod D681Z4807 Type: P80HXZR5HEA2-X + Mod D633-7396 TYPE A02KO4F0HXY Arburg Mod D681Z4877 Type: P80HXZR5HEA2-X + Mod D633-7468 Type A02KO4F0HXY Arburg Mod D681Z4707B Type P80HXUR5VEA2-X + MOOG Mod D633-7330  ...

Spare parts for injection molding machines Spare parts electric Demag Demag Sigmatek DKL 022 KD. 06792862 Demag Dias DTO 163 KD. 06792165 Demag Sigmatek DKL 012 KD. 06792865 Demag Dias DAO 041 KD. 06796265 Demag Dias DEC 181 KD. 06792665 Demag Sigmatek DKL 025 KD. 06793265 Demag Dias DAM 122 KD. 06792265 Demag Dias DDM 163 KD. 06792365 Demag Sigmatek DKL 013 KD. 06793065 Demag Dias DDM 164 KD. 06792465 Demag Dias DM 321 KD. 06014866 Demag Dias AO 041 KD. 06001466 Demag Dias AI 281 KD. 06001166 Demag Dias TO 323 KD. 06013666 Demag Dias DI 32W KD.06715565 Demag Dias PS 242 KD. 06029066 Demag Dias CP 126 KD. 06730365 Demag Dias AI 381 KD. 06013466 Demag Slides AO 081 KD. 06015066 Demag Dias DCP 642 KD. 06791765 Demag Sigmatek DKL 002 KD. 06111966 Demag Dias DAM 124 KD. 07024865 Demag Dias DDM 163 00733445 Demag Dias DEC 161 KD. 00703303 Demag Dias DAI 883 KD. 06 ...

Robot - Wittmann-Demag W833 / High-speed robot Year of Make: 2011 Location: Lodz, Poland Description: 4-axis robot: 4 axes are driven by servo motors (electric): X, Y-telescopic, Z; Axis C - pneumatic Travel in axes: X-900, Y-1600, Z-3000 Touch control panel The safety package for robots Robot with adapter, protective housing Description: 4-axis robot: 4 axes are driven by servo motors (electric): X, Y-telescopic, Z; Axis C - pneumatic Travel in axes: X-900, Y-1600, Z-3000 Touch control panel The safety package for robots Robot with adapter, protective housing All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Injection molding machine, clamping force control unit, control unit -Manufacturer: Demag Kunststofftechnik, clamping force control unit -Type: DMS-SKR 79/5 ID no. 064 929 65 RMS -Dimensions: 165/95/H95 mm -Weight: 0.7 kg

Molding machine of Mag Type: Ergotech 3500-3300, control panel: NC4 year: 2002 Clamping unit Clamping force t: 350 gap mm: 930 Holm dimension mm: 1250 x 1250 min/max height mm: 600-1200 Injection unit Screw diameter mm: 95 injection weight gr: 2260 Injection volume cm 3: 2509 spray pressure bar: 1316 Dimensions and weights Dimensions Lxwxh m: 5.8 x 3.1 x 2.65 machine weight kg: 34,000/7,000 Miscellaneous Europe 63 4 core cascade system PDF FILE PRINTING CONTACT

Molding machine of Mag Type: Ergotech 1300-12000 system, with rice robot control: NC4 year: 1996 Clamping unit Clamping force t: 1300 opening stroke mm: 1500 Holm dimension mm: 1500 x 1250 min/max height mm: 700/1400 Plate size: 2150 x 1880 injection unit Screw diameter mm: 130 injection weight gr: 6060 Injection volume cm 3: 6730 spray pressure bar: 1799 Dimensions and weights Dimensions Lxwxh m: 14.1 x 3.2 x 2.7 machine weight kg: 60,000/20,000 Miscellaneous Nuclear trains with rice robot EUROMAP 12

Key data: 150 , 394 , 50

Manufacturer/manufacturer: Krauss Maffei Typ/type: KM 110-390 C1 Year/year: 1993 Control/controller: MC 4 Clamping force/clamping force: 1500 kN Holmabstand/Dist.Betw.Tiebars: 500 mm x 500 mm Disk size/platen size: 750 x 750 mm WZ height/mould hight: min 250 max 500 mm Opening/opening stroke: 500 mm Plate distance of max/Max open daylight: 1060 mm Auger/screw size: 50 mm Stroke volume/shot volume: 442 CC / 394 gram PS Spritzdr / injection pressure: 1946 bar General / General engine power: 30 kW Heating/heating power: 14,8 kW Dimensions/dimensions: 5.5 m x 1.6 m x 2.10 m Weight/weight: 5600 kg Screen text: German Options/optional extras Core puller / core pulling: x 1 Air valve / air valve: x 1

Demag Ergotech 650-5200 Model 2001 with Sülling Robot Demag Ergotech 650-5200 Model 2001 with Sülling Robot Demag Ergotech 650.5200 Model 2001 with Sülling Robot Demag Ergotech 450-1450 Model 2003 with Sülling Robot Demag Ergotech 450-1450 Model 2003 with Sülling Robot Demag Ergotech 450-1450 Model 2003 with Sülling Robot

Key data: 500 , 94 , 30

Manufacturer/Manufacturer Manufacturer: Demag Typ/Type: Ergotech 50-270 per Bau-year year: 1997 Control/Controller: NC 4 Clothing Power/Clamping Force: 500 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 355 mm x 355 mm Plate Groesse/Platen Size: 540 mm x 540 mm WZ Einbauhoehe/Mould hight: min 210 mm Oeff-weg/opening stroke: 400 mm Plate distance max/Max. Open Daylight: 610 mm Snail/Screw size: 30 mm Lifting volume/shot volume: 144 cc/128 gram hp Spez. Spray./injection pressure: 1890 bar General General Motor/Motor Power: 11 kW Heating/heating power: 7.5 kW Dimensions: 3.6 m x 1.2 m x 1.8 m Weicht/Weight: 2500 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Euromap Core train x1 Air valve x1

Key data: 500 , 95 , 30

Manufacturer/Manufacturer Manufacturer: Demag Typ/Type: Ergotech 50-270 viva Bau-year year: 1997 Control/Controller: NC 4 Clothing Power/Clamping Force: 500 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 355 mm x 355 mm Plate Groesse/Platen Size: 540 mm x 540 mm WZ Einbauhoehe/Mould hight: min 210 mm Oeff-weg/opening stroke: 400 mm Plate distance max/Max. Open Daylight: 610 mm Snail/Screw size: 30 mm Lifting volume/Shot volume: 106.5 cc/95 gram hp Spez. Spray./injection pressure: 2573 bar General General Motor/Motor Power: 11 kW Heating/heating power: 7.5 kW Dimensions: 3.6 m x 1.2 m x 1.8 m Weicht/Weight: 2500 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Air valve x1

Key data: 600 , 52 , 25

Manufacturer/Manufacturer Manufacturer: Demag Typ/Type: Ergotech 60/420-200 Bau-year year: 1999 Control/Controller: NC 4 Control Clothing Power/Clamping Force: 600 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 420 mm x 420 mm Plate Groesse/Platen Size: 570 mm x 600 mm WZ Einbauhoehe/Mould hight: min 210 mm Oeff-weg/opening stroke: 400 mm Plate distance max/Max. Open Daylight: 610 mm Snail/Screw size: 25 mm Lifting volume/shot volume: 61 cc/52 gram hp Spez. Spray./injection pressure: 2740 bar General General Motor/Motor Power: 22 kW Heating/heating power: 8.3 kW Dimensions: 3.7 m x 1.6 m x 2.1 m Weichtt/Weight: 3900 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Core train x1 Air valve x3

Key data: 500 , 41 , 22

Manufacturer: Demag Type: Ergotech 35-115 viva Built: 1998 Control: NC 4 Closing type: Hydraulic Closing force: 350 kN Tie bar distance: 280 mm x 280 mm Plate size: 410 mm x 410 mm Tool installation height: min 180 mm Opening distance: 350 mm Plate spacing max.: 530 mm Screw: 22 mm Lifting volume: 47.5 cc / 41 gram ps Spray pressure: 2440 bar General Engine: 7.5 kW Heating: 6.3 kW Dimensions: 3 m x 1.1 m x 1.6 m Weight: 2500 kg Screen text: German Additional equipment Core train: x1

Key data: 800 , 149 , 35

Manufacturer: Demag Type: 80/420 - 310 concept Built: 2005 Control: NC 4 Control Type of closure: Hydraulish Closing force: 800 kN Tie bar ratio: 420 mm x 420 mm Plate size: 580 mm x 590 mm WZ Installation height: 250 mm Opening distance: 500 mm Plate spacing max: 750 mm Screw: 35 mm Lifting volume: 149 gram PS / 168.3 cc Spray pressure: 2020 bar General Engine: 18.5 kW Heater: 8.8 kW Dimensions: 3.9 m x 1.4 m x 1.9 m Weight: 4100 kg Screen text: German Optional extras Core train: x1

Key data: 1000 , 205 , 40

Manufacturer: Demag Type: 100/420 - 430 concept Built: 2004 Control: NC 4 Control Type of closure: Hydraulish Closing force: 1000 kN Tie bar ratio: 420 mm x 420 mm Plate size: 590 mm x 600 mm WZ Installation height: 250 mm Opening distance: 500 mm Plate spacing max: 750 mm Screw: 40 mm Lifting volume: 231 cc / 205 gram PS Spray pressure: 2020 bar General Engine: 18.5 kW Heater: 11.1 kW Dimensions: 4.9 m x 1.6 m x 2.1 m Weight: 4800 kg Screen text: German Optional extras Core train: x1 Air valve: x1 Robot interface

Key data: 350 , 41 , 22

Manufacturer: Demag Type: Ergotech 35-115 viva Built: 2000 Control: NC 4 Control Closing type: Hydraulic Closing force: 350 kN Tie bar distance: 280 mm x 280 mm Plate size: 410 mm x 410 mm Tool installation height: min 180 mm Opening distance: 350 mm Plate spacing max.: 530 mm Screw: 22 mm Lifting volume: 47.5 cc / 41 gram ps Spray pressure: 2440 bar General Engine: 7.5 kW Heating: 6.3 kW Dimensions: 3.1 m x 1.1 m x 1.6 m Weight: 1800 kg Screen text: German Additional equipment Picker Air valve: x1