We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
123,284 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
grinding diameter: 610 mm grinding length: 3000 mm centre height: mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1310015 Type of machine Cylindric grinder Make STANKO Type 3M193/149 Build in 1988 Max. grinding diameter 610 Max. grinding length 3000 Grinding wheel diameter 700 Grinding wheel widht 75 Total Power (KW) 30 Additional information Incl. 2 staedys The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Tumbler Inject Star HS-7 180 L in a good used and functional condition. Completely made of stainless steel. Rollable 180 liter drum with vacuum connection. Machine can be tilted. Dimensions W/D/H 76/110/110 cm. Connected values 400 Volt, 0,75 kW. Workshop tested, immediately ready for use. More on request.
used
Type:nbsp;16B16P Distance between centers: 850 mm Swing over bed: 360 mm Swing over cross-slide: 190 mm Diametre of main spindle bore: 46 mm Power on main spindle: 7,5 HP
used
Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0 Number controlled axis: 0 CNC Brand: 0 CNC Model: 0 Control: FANUC Series O-T Technical data Number of axis total: 5 Max. turning diameter: 16 mm Turning length: 130 mm Max. drilling diameter: 8 mm Max. threading diameter: 6 M (Metric) Internal spindle diameter: 16 mm Spindle speeds: stepless from: 300 rpm up to: 8000 rpm Tool-holder: number: 5 Counter-operation: number of tools: 3 Drilling tools: 3 pce Spindle motor: 2.2 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: 1700 mm Width: 1000 mm Height: 1900 mm Various accessories: Set of toolholders
used
Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0 Number controlled axis: 0 CNC Brand: 0 CNC Model: 0 Control: FANUC Series O-T Technical data Number of axis total: 5 Max. turning diameter: 16 mm Turning length: 130 mm Max. drilling diameter: 8 mm Max. threading diameter: 6 M (Metric) Internal spindle diameter: 16 mm Spindle speeds: stepless from: 300 rpm up to: 8000 rpm Tool-holder: number: 5 Counter-operation: number of tools: 3 Drilling tools: 3 pce Spindle motor: 2.2 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: 1700 mm Width: 1000 mm Height: 1900 mm Various accessories: Set of toolholders
used
Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0 Number controlled axis: 0 CNC Brand: 0 CNC Model: 0 Control: FANUC Series O-T Technical data Number of axis total: 5 Max. turning diameter: 16 mm Turning length: 130 mm Max. drilling diameter: 8 mm Max. threading diameter: 6 M (Metric) Internal spindle diameter: 16 mm Spindle speeds: stepless from: 300 rpm up to: 8000 rpm Tool-holder: number: 5 Counter-operation: number of tools: 3 Drilling tools: 3 pce Voltage 50 Hz 3x: 380 Volt Spindle motor: 2.2 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: 1700 mm Width: 1000 mm Height: 1900 mm Various accessories: Set of toolholders
used
Stick Bread Box Bread Filling Machine Box Filling System -automatic stick bread box bread filling system
used
The Stanko 3B70V surface grinding machine was manufactured in 1976 in the USSR. The 3B70V grinder is designed for grinding flat surfaces of various products with a maximum height of 320 mm and a weight of up to 50 kg. The machine has a working table with dimensions (L x W) 400 x 160 mm. The grinding wheel of the grinder has a diameter of 200 mm, and the power of the machine's electric motor is 1 kW. Technical data of the Stanko 3B70V magnetic surface grinding machine - dimensions of the working table (length x width): 400 x 160 mm - grinding wheel diameter: 200 mm - maximum weight of the workpiece: 50 kg - maximum height of the workpiece: 320 mm - electric motor power: 1 kW - dimensions (L x W x H): 1465 x 1950 x 1610 mm - total weight of the Stanko 3B70V grinder: 1500 kg
used
STAHL FOLDER 4 PARALLEL PLATES + 1 CROSSED Size 49x ...
used
Stahl folding machine, mod T50 / 44, year 1992, complete with flat stack sheet feeder, 1st and 2nd parallel folding group with 4 pockets, copy counter with pre-selector for bundle, scale output. In perfect working order and in excellent condition
used
Stahl Ti 52 from 1999 - 4+4 plus knife and glue point. Fully functional machine.
used
For sale: Stahl digital 68 combined rotary 6+4+2 folding machine in working order maxy toppy battery turner (battery to be replaced) Mosca automatic strapping machine and a bizzozero two heads ideal for blocks or other.
used
Folding machine Stahlfolder TI-40 Year of manufacture 2005 Flat pile feeder Pump Counter DCT 500 Parallel fold unit with 3 buckle plates Anti noise hood(s) Stream delivery
used
Hmotnost stroje: 32750 kg Celkový příkon stroje:: 42 kW Max. průměr broušení: 700 mm Vzdálenost hrotů: 4000 mm Max. hmotnost obrobku: 3000 kg
used
Maximum load capacity: 800 kg Suspension class: - Adjustment range: 400-1420 mm Price: on request Year of construction 1999 We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
used
STAMA MC325 / S 2-palllet Double fourth axes Spindle 9000 rpm / 36 tools priced to sell The machine is visible in our warehouse in Gussago BS., Mimu Machine Tools, Gussago BS Italy, The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations, with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several motion axles and one, automatic tool exchange system and sometimes multiple pallets, CNC type: Siemens, Fourth axis: 2 + 2, Number of pallets: 2, Spindle speed RPM: 9000
used
Stamford HC.M634J1 - Unused- 910 kVa - Generator End
used
For sale is a Stamford HVSI 804 R2 generator with serial number 0856607/01. This generator was coupled to a Jenbacher 420 engine with the design number H719. The generator delivers an output of 2167 kVA at an output voltage of 10,500 V. It was manufactured in 2010 and has since clocked up 85,200 hours of operation. An important aspect to keep in mind is the careful maintenance history of this generator. At 60,000 operating hours, maintenance was carried out by Baumüller and at 70,000 operating hours, a comprehensive overhaul was carried out. The price of this powerful and well-maintained generator is 18,000 euros. Please do not hesitate to contact us for more information or to arrange a viewing.
used
Semi-automatic, 90 degrees Quick-release system Cooling pump Including short roller conveyors
used
Flail mulcher for three-point attachment (rear or front) Cat. II, PTO drive 540 rpm, gearbox with freewheel, hydraulic side displacement approx. 350 mm, working width 240 cm, 34 hammer mallets. Further flail mulchers, also laying mowers and other mowing technology in stock - see example photos! Info and offers on request. No sending of package deals or lists. Please name and phone no. for queries. Please let us advise you in advance by phone. Appointment required for viewing!
used
Offer Centrifuge SZB0 1000C 960 1/min 6 loads/h for separation of Plastiso and Parex Photo 1-9 The centrifuge was part of a wallpaper production line. After cleaning the tools, it is used to separate the plastisol from the parex. Manufacturer: VEB Chemieanlagenbau Staßfurt Maschinfabrick Sangerhausen Type: SZB0 1000C Ref. 5604 Year of construction: 1986 Speed: 960 1/min Load: 145 kg Internal volume of the drum: estimated 200 liters Max clearance: 6 loads/h Power supply: 380V 3~ 50 Hz 5.5kW Weight: 1660kg Condition: used, stored, worked until siling and on 7 Paint mixing buckets Mixing tank Agitator tank Drais 300 l Photo 10-12 The paint mixing buckets were part of a wallpaper production plant in Halle and were used as accessories to the Drais paint mixing plant type RN 218 (sold). Technical data (partly estimated or from comparison plants): Manufacturer: ...
used
This Star SR-20RIII lathe was made in the year 2008 and has 40652 working hours. It is equipped with a Fanuc Series 300is-MODEL A control unit. The machine has a spindle speed of 10000 rpm.
used
This STAR SR-20 R II Lathe was manufactured in the year 2004. It is equipped with a Fanuc Series 18i-TB control unit and has 7 axis. The machine has a spindle speed of 500-10000 rpm.
used
This STAR SR20JN Swiss Type Turning was manufactured in the year 2013 in Japan. It is equipped with a CNC control Fanuc 31i-B and has a C-axis on main and counter spindle. A FMB-Loader is included.
used
This STAMA MC 326 TWIN Vertical Machining Centre was manufactured in 2000 in Germany. It has a Siemens control 840 D. It is equipped with a spindle with HSK63-A.
used
This STAKO Trium WPC Retrofit plasma cutting machine was made in the year 2019 in the Netherlands.
used
Stroke: 0 mm Throat: 0 mm Table diameter: 0 mm MERK Stanko TYPE 7A420 M YEAR 70 er Stanko 7A420M Steek bank
used
Lifting capacity: 25000 kg Hoist height: 0 mm Span length: 13000 mm Type: Overheadcrane MACH-id 3524 MAKE Stahl Germany TYPE YEAR SPECIFICATIONS Span13.000 mm SWL / Kg 25.000 kg Stahl used cranesystem, overhead crane.More cranes on:
used
Center height: 400 mm Center distance: 4000 mm Spindle bore: 110 mm MAKE Stanko Russia TYPE 1 M YEAR 2003 SPECIFICATIONS Swing over bed Ø 830 mm Swing over cross slide 480 mm Distance between centres 4000 mm Work piece weight 4000 kg Spindle bore 110 mm Spindle speeds / ranges 1250 Rpm
used
Table diameter: 1400 mm Turning diameter: 1600 mm Turning height: 1000 mm Motor power: 30 HP/kW Positions ATC: 0 Positions APC: 0 SPECIFICATIES Besturing Conventionel Max. Draai diameter Ø 1600 mm Klauw plaat / tafel diameter Ø 1400 mm Max. Draai hoogte 1000 mm Werkstuk gewicht 8000 Kg Horizontale verplaatsing support 700 mm Slag van ram links / support links 850 mm hoek verstelling ram draaibaar ˚graden 35 Gr Toeren - Snelheden - Stappen 18 steps 5 - 250 Rpm Vermogen Kw 30 Kw
used
Workpiece weight: 10000 kg Table diameter: 1400 mm Make Stahler 10 T Type SD 10000 Year 70 er Welding positionar manipulator Workpiece weight by welding positioner (kg) Table 1400 x 1400 Table diameter (mm) Load = 10.000 Kg Workpiece weight by selfaligning rotater (kg)Tilt 0 - 135 Gr Workpiece diameter (mm)Remote control Number of rolls New Elctr. cabinet
used
Stainless Steel Heated Hopper for Filling Machine Frequency: 50 Hz Price: on request
used
Pallet feeder – separating head MCT2000 touch control monitor 1st folding unit - 4 motorized buckles and rollers BCUH KTLL unit with 3 motorized knives + side buckle (after the 1st knife) Noise hood Compressor SBP 46+VE delivery
type: 6334A Deph of throat -- ramcentre: 450 mm Length: 2500 mm Depth : 2200 mm Height: 3300 mm
used
Folding machine KC 56-6 KTL-FE maximum infeed width: 56 CM Flat feeder feeder TREMAT suction head 6 parallel fold pockets KTL cross fold (2 knives + newspaper fold pocket) Web delivery EVZ 30 counter
used
used
used
used
used
used
Machine Details Warehouse number 1105-03578 Machine Type Machining Center - Vertical StAMA ROBODRILL brand Type MC 010 Year of construction 1990 Control type CNC Storage location HAGUENAU Country of origin JAPAN Delivery time IMMEDIATELY Freight base from stock Technical details x-travel 500 mm y-travel 380 mm z-travel 300 mm Spindle holder ISO 30 sk sa Clamping surface 650 x 380 mm Tool magazine with 10 seats Tool change time 5 sec workpiece weight 200 kg Speeds - autom. switchable 60 - 8000 rpm Feed speed 1 - 4095 mm/min Feed force 400 kp (X, Y) Feed force 1000 kp (Z) Rapid traverse speed 36 m/min (X, Y) Rapid traverse speed 30 m/min (Z) Information Equipped with/ Equipped with: - FANUC 0 M Control - 10-fold tool changer SK 30 - Coolant system / cooling attachment - 4 T-slots / 4 T-slots TOOLS SK 30
used
Steel hall complex built in three construction phases (consisting of a small production hall built in 1990, a large production hall built in 1997 and a warehouse built in 2007), which is to be dismantled in the short term. It is a thermally insulated hall complex whose supporting structure, building envelope and equipment can be reused. H6 - Production hall, built in 1990 with crane runway hL23.06 x hB13.32m x dH6.3m / fH8.8m = GFA 307.16 sqm ; Storage area on the upper floor: 5.07 x 12.95 = NF 65.66 sqm ; The primary construction consists of hot-rolled Euro profiles. The secondary construction for the building envelope is made of rolled steel, i.e. roof purlins made of IPE 160; Wall beam middle HE 140 A, and cold-formed steel profiles made of galvanized strip steel, C-profile wall beam top 140/90 (20/3 mm KRUPP STAHL KALTFORM. Sandwich wall: Hoesch-isowand TL 66 with profi ...
used
Unused, manual available
used
Magnetic drilling machine; Max. drilling diameter 35 mm drilling diameter; power 1600 watts; connection 230 Volt; magnet strength 16000 newtons; speed 810 rpm; drilling depth 145 mm; including oil reservoir for cooling and lubrication; belt for fall protection; Condition unused, in its original packaging
used
Unused, manual available
used
Unused, manual available
used
Magnetic drilling machine; Max. drilling diameter 35 mm drilling diameter; power 1600 watts; connection 230 Volt; magnet strength 16000 newtons; speed 810 rpm; drilling depth 145 mm; including oil reservoir for cooling and lubrication; belt for fall protection; Condition unused, in its original packaging
used
Link chain -2,5m -24.1 kg
used
Unused, manual available
used
Unused, manual available