sta used for sale

Built 1997 format max 520 x 840 mm min 100 x 150 mm Folding capacity max 180 m/min Equipment: o Flat pile feeder o Zaehlgeraet 1. Folding unit: o 4 folding bags 2nd folding unit: o 4 folding bags

Various clamping systems with zero-point clamping systems. Various groes. For larger parts, e.g. 1000 - 1500 mm or larger. With hydraulic connection for grid plate clamping. All Wuerfel with corresponding grid plates. clamping and grid plates from well renowning German manufacturers. Best condition. 40 slabs available in various size; Very good

Various clamping cubes with Zero-point clamping systems. Various sizes. All are for larger parts, for example 1000 - 1500 mm or larger. With hydraulic clamping of the clamping angles. All the cubes are fitted with clamping angles. The clamping cubes and clamping angles are made by best precision well named German manufacturers. All in excellent condition. 40 units in various sizes. ; Very good

P78 - used approx. 7 m³ / 7,000 litres polyester tank / GRP-tank, aboveground, vertical, Staffelstein tank, in good condition. volume: approx. 7 m³ / 7,000 litres material: polyester / GRP width: approx. 2.00 m length: approx. 1.50 m height: approx. 2.70 m Vertically standing, aboveground storage tank, dome on the front side, several in- and outlets, by manufacturer Staffelstein. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Pleas ...

P75 - used approx. 6 m³ / 6,000 litres polyester tank / GRP-tank, aboveground, vertical, Staffelstein tank, in good condition. volume: approx. 6 m³ / 6,000 litres material: polyester / GRP width: approx. 1.50 m length: approx. 2.00 m height: approx. 2.80 m Vertically standing, aboveground storage tank, dome on the front side, several in- and outlets, by manufacturer Staffelstein. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Pleas ...

North Star NSRC / EMCO Pulse Generator Pulse Generator 54kV The pulse generator used in this system consists of two capacitor assemblies which are charged to opposite polaritaants. The system is operated with pressurized insulating gas to supply the specified voltage range of the operation. nitrogen is used for the pulsergefaess for the entire range, wherethe pulse generator pressure of atmospheric pressure (0 psig) reaches to a maximum (60 psig). With 60 psig nitrogen, the pulse generator has at least 27 kV per capacitor and thus delivers a pulse of about 54 kV to the peaking capacitor.

Pump vacuum cleaner with integrated submersible pump that continuously pumps absorbed liquids out of the container, RCDs in the mains connection cable, special filter bags, application-oriented accessories. The pump can be completely removed and the container closed, so this industrial vacuum cleaner can also be used as a normal wet-dry vacuum cleaner. Areas of application: Suction/suction of large quantities of liquid, use in floods, use in flat roof renovation, cleaning of garden ponds and pool facilities. SCOPE OF DELIVERY Including accessory set pump vacuum cleaner. Additional filter 1 x FSS 1200 (foam) Filter bag 1 x FSN 80 1 x Suction hose Ø 35 mm x 5 m 1 x Drain hose Ø 33 mm x 5 m 1 x Handle tube plastic with secondary air slider 2 x Suction pipe plastic (each 50 cm) 1 x Aluminium professional floor nozzle 45 with rubber and briste strips EQUIPMENT Main filter FPP ...

Technical data Ruwac WS 2220 m Suction: 2,400 Watts Air capacity: 290 m3/h Voltage: 230 Volt Vacuum: 210 mbar Filter surface bag filter: 1.2 or 2.6 m2 Tank capacity: 35 litres Residual dust filters: 3.2 m2 Sound pressure level: 67 dB(A) Inlet: 50 mm

Spare parts for Tischbohrwerk VO / Stankoimport / Gertner, Fuhrmeister & CO E.g. complete spindle SK50 Ball screw spindles from the three axes Electric motors, 3 x feed motor, spindle motor complete control Siemens or control cabinet Control Panel with digital device Glass scales Detachable faceplate diameter 360 mm Radial movement of the faceplate-support 100 mm Converter / transformer Angle drilling head Dividing head Spindle diameter ø 110 mm tool holder ISO 50 Technical data of the original machine Travel along approx. 1.000 mm cross travel approx. 1.600 mm of vertical stroke 1,000 mm Longitudinal movement of retractable spindle 710 mm Speed range 10-1,250 RPM Main engine 11kw Speeds 10-1,250 RPM in 22 gear stages Extensive documentation of machine including operating instructions, description, electrical documentation, etc. More photos on request

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 0T Technical data Number of axis total: 5 Max. turning diameter: 16 mm Turning length: 130 mm Max. drilling diameter: 8 mm Max. threading diameter: 6 M (Metric) Internal spindle diameter: 16 mm Spindle speeds: stepless from: 375 rpm up to: 8000 rpm Tool-holder: number: 5 Counter-operation: number of tools: 3 Drilling tools: 3 pce Spindle motor: 2.2 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: 1700 mm Width: 1000 mm Height: 1900 mm Various accessories: Set of toolholders Bar feeder Manufacturer: LNS Type: MINI-SPRINT

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 0T Technical data Number of axis total: 5 Max. turning diameter: 16 mm Turning length: 130 mm Max. drilling diameter: 8 mm Max. threading diameter: 6 M (Metric) Internal spindle diameter: 16 mm Spindle speeds: stepless from: 375 rpm up to: 8000 rpm Tool-holder: number: 5 Counter-operation: number of tools: 3 Drilling tools: 3 pce Spindle motor: 2.2 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: 1700 mm Width: 1000 mm Height: 1900 mm Various accessories: Set of toolholders Bar feeder Manufacturer: LNS Type: MINI-SPRINT

Pull-out device Brand: Sandie

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series Technical data Longitudinal travel (X-axis): 800 mm Transversal travel (y-axis): 520 mm Vertical travel (z axis): 510 mm Tool magazine number of tools: 64 Tool diameter max.: 78 mm Diameter with free adjacent pockets: 160 mm Tool lenght: 300 mm Max. tool-weight: 5 kg Average chip-to-chip time: 3.3 sec Spindle nose: HSK-A: 63 DIN 69893 Spindle diameter: 70 mm Spindle speeds: stepless up to: 10000 rpm Feed range: 1 - 10000 mm/min Rapid traverse:: 60 m/min Max. Feed force: 7000 / 12000 N Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Spindle power: 22 / 51 kW Total power required: 80 kVA Machine´s weight about: 9000 kg Overall dimensions machine: Length: 5027 mm Width: 2628 mm Height: 3278 mm Space requireme ...

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Operating hours: 75960 Technical data Number of axis simultaneous: 5 Number of tables: 1 Number of spindles: 1 Table load max.: 800 kg Longitudinal travel (X-axis): 800 mm Transversal travel (y-axis): 750 mm Vertical travel (z axis): 620 mm Dimension of the workpice: Height: 550 mm Diameter: 500 mm Table divisions (B): 0,001° ° A axis: 145° (+35/-110°) Table speed: 30 rpm Pallets:: System Staflex number: 4 Length: 500 mm Width: 500 mm Transport weight: 200 kg Tool changer: Number of tools: 60 Tool diameter max.: 120 mm Diameter with free adjacent pockets: 200 mm Tool lenght: 400 mm Max. tool-weight: 15 kg Spindle nose:: HSK-A 100 Spindle speeds:: STEP TEC stepless up to: 12000 rpm Torque max ...

Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

Table diameter: 7100 mm Turning diameter: 8000 mm Turning height: 3240 mm Motor power: 0 HP/kW Positions ATC: 0   Positions APC: 0   MAKE  STANKO 3KTC TYPE   1580 L YEAR    Overhauled 2006 SPECIFICATIONS Controll  Conventionel Max. turning diamter Ø   8000 mm Table / chuck size Ø   7100 mm Workpiece height    3240 mm Work piece weight   125000 Kg Horizontal movement support / ram    4400 mm Stroke support left ram    2000 mm Stroke support right ram    2000 mm Angle adjustment / ram swivable   - 15 / - 30 Gr Live tooling    Milling spindlel 650 Rpm Singel column or double column Double column   Spindle speeds / ranges    19.6 Rpm DIMENSIONS Length   9000 mm Width     14000 mm Height ...

Table diameter: 1400 mm Turning diameter: 1600 mm Turning height: 1000 mm Motor power: 25 HP/kW Positions ATC: 0   Positions APC: 0   SPECIFICATIONS Max. turning diamter Ø   1600 mm Table / chuck size Ø   1400 mm Workpiece height   1000 mm Work piece weight   8000 Kg Horizontal movement support / ram   700 mm Stroke support left ram   850 mm Angle adjustment / ram swivable   35 Gr Singel column or double column   Single column Spindle speeds / ranges  5 - 200 Rpm Power  25 Kw DIMENSIONS Length   3500 mm Width   4200 mm Height   4750 mm

Stahlfolder TI 52-4 KB with Tremat, flat pile feeder, 4 buckles, 1 knife, avail 12/18

Radial drilling machine make STANKOIMPORT type 2 K 52-1Fabr. -No: 176Technical specifications:Drilling capacity in steel: 25 mmmin./max projection: 300/800 mmVertical boom adjustment: 625 mm8 spindle speeds: 63 - 1600 rpmSpindle mount: MK 2Workpiece height: 1000 mmQuill stroke: 250 mmFeeds: 0.125 - 0.2 - 0.315 mm / revColumn diameter: 180 mmClamping surface of the base plate: 900 x 630 mmDistance table-lower spindle: 125/1000 mmTotal power requirement: 1.5 kWExternal dimensions LxWxH: 1760 x 915 x 1970 mmMachine weight approx: 1.25 tused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

We sell large post steel pipes DN 1000 encased, coated inside, wall thickness 14.8 mm, very good condition. Lengths between 4-18m.

We sell large post steel raw DN1200, coated on the outside, coated on the inside, wall thickness 20mm, lengths up to 12 m, To this end, we also have new arcs, different degrees.

Surface grinding machine make STANKO type 3 D 711 WF-11Fabr. -No: 1330, built in 1989Clamping surface of the magnetic plate: 630 x 200 mmTravel length: 700/670 mmTravel crosswise: 250/245 mmGrinding wheel size: 250 mmGrinding wheel speed: 2230 rpm.Distance spindle axis table: 80 - 550 mmVertical sanding adjustment: 80 - 550 mmLifting speed continuously stepless: 2 - 30 m / minCrossfeed stepless: 0.3 - 35 m / minCrossfeed stepless: 0.3 - 40 mmVertical adjustment stepless: 0.001 - 0.09 mmRapid traverse vertical: 0.3 m / minRapid traverse cross slide cross: 1.6 m / minDrive power: 4 kWOutside dimensions approx: 2500 x 1700 x 2000 mmWeight ca.:2,6 tWith- Magnetic disk- Cooling device with magnetic separator- separate electrical cabinetused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data ar ...

Surface Grinding Machine Fabr. STANKO Type 3 E 711 WFabr. -No: 6171, year of construction ca. 1985Clamping area of the table: 630 x 200 mmSchleifscheibendrm. min / max.: 160/250 mmGrinding wheel speed: 2680 rpm.Spindle axis table clamping surface distance: 80 - 445 mmVertical sanding adjustment: 365 mmLifting speed continuously stepless: 2 - 30 m / minCrossfeed stepless: 0.3 - 30 m / minVertical adjustment stepless: 0.002 - 0.08 mmRapid traverse grinding stick vertical: 0.3 m / minRapid traverse cross slide cross: 1.5 m / minDrive power: 4 kWelec. Connection: 220 / 380VOutside dimensions approx: 2000 x 1770 x 1920 mm highWeight approx: 3020 kgWith- Separate control cabinet- Suction- Hydraulics- Filter- several grinding wheel holdersused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are no ...

Surface Grinding Machine Fabr. STANKO Type 3 D 722 WMake -No: 43432, built in 1987Sanding area: 1250 x 320 x 400 mmsm./lg. Distance spindle center - clamping surface Table: 190/630 mmTable clamping surface: 1000 x 320 mmsm./lg. hydr. Longitudinal adjustment of the table: 300/1050 mmClamping surface of the magnetic plate: 900 x 320 mmHeight of the magnetic disk: 120 mmgr. Vertical adjustment of the headstock: 440 mmGr. transverse adjustment of the wheelhead: 400 mmsm./lg. Outer diameter of the grinding wheel: 325/450 mmDrm. Grinding wheel bore: 203 mmGrinding wheel speed: 1500 rpm.Stepless longitudinal movement of the table: 2.0 - 40 m / min.infinitely variable feed of the headstock: 0.5 - 3.0 m / min.Vertical rapid adjustment of the headstock: 406 mm / min.Drive power: 10 kWOutside dimensions approx: 3300 x 2020 x 2290 mmWeight approx: 7100 kgWith- magnetic disk- Separate hydraulics- Con ...

4 axis vertical machining center for input shafts machining 2 pallets STAMA MC 325S 2 pallet with rotopallet Peiseler X=500 Y=300 Z=350 mm Rapids X,Y,Z = 40/40/45m 36 tools ISO 40 36-9000 rpm Table 950 x 800 mm CNC SIEMENS 840 N.2 double 4th axis Coolant through spindle Lavorazione input shafts (ex TRW) INTERESTING PRICE (package of 2 machines)

CNC universal tool milling machine make STANKO type SMK 25/32Year of construction 1992Travel X: 510 mmTravel Y: 410 mmTravel distance Z: 400 mmSpindle mount DIN 6987 ISA 40Table surface: 800 x 400 mmPiece weight: 400 kgstepless speeds: 20 - 2000 rpm.Quill stroke: 80 mmFeed range: 1 - 3000 mm / minRapid traverse: 5 m / minDrive power: 11 kWOutside dimensions: 2600 x 2150 x 2130 mmWeight approx: 2000 kgWith- Point distance control HEIDENHAIN TNC 135- Chip collecting panused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Univ.-Milling Machine Fabr. STANKO Type 675 MFabr. -No: 1727 built in 1972Table longitudinal path X: 320 mmUpper arm lateral travel Y: 200 mmTable perpendicular path Z: 300 mmSpindle mount: MK 416 spindle speeds: 50 - 1600 rpm.16 feeds X, Y and Z: 12.5 - 400 mm / minRapid traverse X, Y and Z: 935 mm / minvertical clamping surface: 500 x 200 mmAngle table clamping surface: 630 x 200 mmDrive power: 1.5 kWDimensions L x W x H approx: 1000 x 1200 x 1700 mmWeight approx: 770 kgWith- rapid traverse- Cooling device- different tool holdersATTENTION: Without vertical milling head used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

P176 - 8x used approx. 30 m³ / 30,000 litres polyester tanks / GRP tanks, aboveground, water tanks, slurry tanks. technical details: capacity: approx. 30 m³ / 30,000 litres material: polyester tank / GRP tank, food tank manufacturer: Staffelstein dimensions: Ø approx. 2.4 m x total height approx. 8.4 m Used tanks in good condition, former juice tanks, aboveground storage containers, standing upright. Multiple connections, inlets and outlets, lid at the bottom of the tank body. Tanks will be repainted. The tanks have been emptied and professionally cleaned inside. According to the age traces of use are present. These containers can be used as storage tanks for water and many different media. Price upon request. Transport can be arranged at low cost. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it ...

Steel window folding bag for TH 78 Built: 2007

MARINE GENERATOR SET Mitsubishi STAMFORD ALTERNATOR 295 KVA / 1500 RPM

STANKOIMPORT 5822M thread grinding machine was manufactured in the USSR. The machine is used for the process of grinding threads to give them the correct dimensions and roughness. During this process, a grinding wheel with a diameter of 400 mm is used to remove a small allowance from the workpiece, forming the thread shape on it. The grinding machine processes threads with a maximum diameter of 200 mm, a length of 500 mm and a weight of up to 30 kg. Depending on the choiceed disc, the diameter of the workpiece can be from 3 to 150 mm (grinding with a single-coil disc) or from 10 to 120 mm (grinding with a multi-coil disc). The total weight of the grinding machine is approximately 5 tons. Technical data of the STANKOIMPORT 5822M thread grinding machine - maximum workpiece diameter: 200 mm - diameter of the workpiece grinded with single-coil disc: 3-150 mm - diameter of the workpi ...

width 52 cm age 1989 flat pile feeder TREMAT 4 folding pockets in the parallel fold section 1 folding knife in the cross fold section counter EVZ noise absorbing hood stream delivery Ref: ST190257A Please ask for price. We ship and install worldwide!

Generator from DEUTZ 616 V16 Newage Engineers Ltd. 664 kW 830 kVA We are also happy to make an offer about generator maintenance

Generator from DEUTZ 616 V12 Newage Engineers Ltd. 664 kW 830 kVA We are also happy to make an offer about generator maintenance

- overhauled in 2007 (spindle bearings + silde guides) - control: FANUC OT - max. turning Ø: 16 mm - max. turning length in 1 fixture: 130 mm - spindle speed: 300 - 8.000 1/min - cross tools: 5 - spindles in frontal device: 3 - max. boring-Ø: 8 mm - max. thread-Ø: M6x1,0 - fixed and rotating guide bush - parts removal backwards for long partse - after-ripening device - weight: 1.000 kg - div. tool holders - barfeeder CNC-Boss 542/32L, Bj. 1994

DEUTER 480 m2, 16x30 m, 5 m high high high high-speed steel hall / Steel Construction Year 1998 - Insulation / Sandwich Panels & Heating - Snow load zone 2 = 85 KG / m2 - no statics available / flying buildings, - Location North Germany - easy assembly / self-assembly, Year 1998

Used Ex GE Jenbacher 312 YOM: 07/2003 Cont. rating: 1250KVA / 972KW Frequenz: 50HZ RPM: 1500 Volts: 400V/231V ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Used Ex MWM 616-16 Built: 50/2000 Type power: 1110KVA Frequency: 50HZ RPM: 1500 Volts: 400V/231V ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Flat slider for drilling rig for mounting in the drilling spindle Tool holder SK50

Electronic Components Drilling Rig StankoImport Stanko-Import 2A622/1600 Electronic components from a Stanko Import drilling rig How 3-pulse thyristor amplifier Bosch Siemens Sikostart Bosch PC200 ZE with Bosch Eprom Bosch PC200 E24V Input Bosch PC200 AR/2A Output Bosch PC200 NT5V Gvvrsw Murrelektronik Type NLS 100-220/24 Uprim 110/220 Upc 24V= Mat.Nr. 031447-102401 Mat.Nr. 031447-102303

Sell a CFM Model 3156 sucker. This comes from a location closure of a pharmaceutical production - Manufacturer: Nilfisk/CFM - Type: 3156 - Wet/dry vacuum cleaner - suitable for the food industry - Weight approx.: 60 Kg - Year of construction: - Rotations: 2850 rpm Us8ybssd - Power: 1.5 kw - Connection voltage: 380 V, 50 Hz - Filling volume of waste bin: 25 L - Diameter connection for the suction pipe: 50 mm - Dimensions (LxWxH) in mm: 700 x 450 x 1300 - optical condition very good - with various suction nozzles, - used - functional

Capacity, ton 800 Movable die stroke, mm 180 Max. upsetting ram stroke, mm 380 Upsetting ram workstore, mm 250 Upsetting ram return stroke with closed dies, mm 130 Distance bentween upsetting ram and dies stroke forward, mm 140 Number of ram strokes per minute 35 Die dimensions, mm 590 x 220 x 660 Electric motor power, kW 40 Dimensions: mm 6300 x 3900 x 2850 Weight: kg app. 80800

Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

- The largest diameter of the workpiece, mm 90 - The maximum diameter of the planted flange, mm 120 - Rated force of the landing slide, kN 6300 - The force perceived by the clamping slide with closed dies, kN 6300 - stroke of the landing slider, mm 350 - The stroke of the landing slide after closing the dies, mm 230 - The frequency of continuous idle slider per minute, not less than 42 - Power of the electric motor 45 - Dimensions, mm length 4835 width 3450 height 2880

used wood carburetor Plant Bj 99 with control cabinets and Perkins gas engine, Generator Stamford 670 kVA Plant was only in operation for 6 months also associated wood chip drying plant available

Used machine Starrag Heckert CWK 400D