sta used for sale

Description X axis: 3000 mm Y axis: 600 mm Z axis: 1000 mm motors: brushless collet rotation: 0 ° -90 ° press interface: Euromap 12 Robot previously installed on a 220 ton press.

Description X axis: 2500 mm Y axis: 435 mm Z axis: 1000 mm Motors: Brushless Overturning: 90 ° N ° 1 Empty

Description X axis: 2500 mm Y axis: 435 mm Z axis: 1000 mm Motors: Brushless Overturning: 90 ° N ° 1 Empty

Description transverse X axis: 3000 mm Y axis extraction: 1100 mm Vertical Z axis: 1800 mm motors: brushless caliper rotation: yes caliper overturning: yes Sprue clamp: no empty: 2 gripper control: no indicative size of the press (ton): 2000 tons maximum load: 15 kg Euromap 67

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Steel container with Newage Stamford generator, continuous KVA rating: 1215, continuous kW rating: 972, weight: 2751 kg, SWEP heat exchanger, dimensions container: 12200 mm x 2440 mm x 2800 mm.

Steel container with Newage Stamford generator, continuous KVA rating: 1215, continuous kW rating: 972, weight: 2751 kg, SWEP heat exchanger, dimensions container: 12200 mm x 2440 mm x 2800 mm.

Pökelmaschinen Ges.m.b.H/Inject Star mobile ham press, type: FWP-I-21, number: FWP21-364, year of construction: 2005, air pressure: 4-12 bar, dimensions: 1900 mm x 600 mm x 1720 mm.

Inject Star mobile elevating belt, type: FL-600, machine number: FL600-101, year of construction: 2007, 400 V, 3 Ph, 50 Hz, 0.75 kW, s/s frame, plastic mesh belt with dividers, belt width: 600 mm, distance between dividers: 700 mm, divider height: 80 mm, total dimensions: 5000 mm x 900 mm x 1160 mm.

number of controlled axis:6 workpiece weight:12 kg throat:1360 mm weight of the machine ca.:0,26 t

x-travel:630 mm y-travel:200 mm z-travel:360 mm total power requirement:7,5 kW weight of the machine ca.:2,5 t dimensions of the machine ca.:1500 x 1800 x 1900 mm spindle taper:SK40 table-size:250 x 1100 mm

rotary table dia.:400 mm weight of the machine ca.:130 kg dimensions of the machine ca.:500 x 600 x 160 mm

faceplate diameter:400 mm weight of the machine ca.:60 kg

Controls: FANUC Series 16-M.

X-travel: 1600mm, y-travel: 400mm, z-travel: 350mm, max. rotational speed: 10,500/min, rapid traverse: 45m/min, feed rate: 1-10,000mm/min, connected load: 46kVA, controls: Siemens 840D, with documentation, optionally there are one automation and one counter bearing to the fourth axis available.

X-travel: 650mm, y-travel: 650mm, z-travel: 650mm, clamping surface: 400x400mm, max. load: 400kg, length: 4600mm, width: 3920mm, height: 2900mm, weight: 12.8t, operational hours counter: ca. 60,000h, with documentation, was maintained regularly.

Max. Drilling diameter: 35 mm, Distance from spindle axis to column: 300 mm, Max. Spindle stroke: 250 mm, Max. Through-feed drill head: 170 mm. Table top dimensions: 450x500 mm, Number of spindle speeds: 12 from 31.5 - 1400 rpm, Overall machine dimensions: 1030х835х2535 mm, Weight: 1200 kg. On-site inspection is possible.

Max. rotational speed: 2000/min, voltage: 380V.

Table dimensions: 500x200mm, connected load: 1.5kW, length: 1110mm, width: 1170mm, height: 1650mm, weight: 770kg, with documentation, without accessories.

X-travel: 500mm, y-travel: 380mm, z-travel: 360mm, main spindle/turning spindle speed: 10,500/ 3000/min, max. axis speed: 60m/min, control: Siemens 840D, with HSK-A63 and collet chuck, some spare parts are also available.

Max. grinding length: 620 mm, Sanding width: 200 mm, Max. Workpiece height: 350 mm. Spindle speed: 1,380 rpm. Magnetic clamping plate dimensions 200 mm x 600 mm, weight: 3000 kg. On-site viewing is possible.

Power: 5.5kW, length: 2800mm, width: 1300mm, height: 1700mm, weight: 2.7t.

PET films were produced on the extruder, working width: 650-800mm, output: 600-700kg/h, with cooling spirals, new extruder screw, degassing system, other spare parts and documentation, without dosing system, an on-site inspection is possible.

Max. product height: 230mm, length: 8500mm, width: 2400mm, height: 3800mm, weight: 6.5t, with documentation, the machine is still in its original packaging.

Rated power: 400kVA, rated frequency: 50Hz, max. short-circuit duration: 2s, switching group: Dyn 5, cooling: ONAN. Total weight: 1350kg, oil weight: 310kg. Including an oil drip tray.

Load: 3t, length: 7005mm, height: 330mm, weight: 490kg, including documentation.

There are a 500kg-column-mounted slewing crane and a 250kg crane traverse Carl Stahl available.

Size: 520 x 740 mm Equipments: good condition 4 buckle plates Foldingknife

– 36 needles – Completely factory refurbished – With 1 year warranty.

Automatic injector INJECT STAR BI 124/248 needles. 2006 manufactured. The machine is complete with a rotary filtering system. Fully factory refurbished with 1 year warranty.

Injector Inject Star PI 75 Tape width: 61.5cm Machine dimension in cm: Width: 100 Lenght:210 Height: 228 Delivery time: 30 working days after advanced payment

Feeder bottom suction wheel Folding configuration 2 platebuckles Details Stahl EZ32 counter, noise hoods, vacuum pump Condition after order we will install new suction wheel Available direct

Roll grinder machine STANKO XC3 CHS 193 under power, working condition - min. grinding diameter 240 mm - max. grinding diameter 2000 mm - max. workpiece length 6700 mm - grinding wheel diameter 600 mm - workpiece diameter: 2000 mm

max size: 52 x 84 cm min size 10 x 14 cm - flat pile feeder - Tremat - 1 Station with 4 buckles - 1 knife - standard delivery

Gear hobbing machine STAEHELY mod. SH25US + n. 2 Basket sanders D 1700 and D 1400

Boring power: 35 mm turning speeds: max. 810 U/min core drilling diameter max.: 35 mm tool taper: Weldon 19,05 mm bore stroke: 210 mm weight: 11 kg connected load frequency: 230 V engine output: 1,6 kW Dimensions (LxWxH): 0,4 x 0,25 x 0,275 m Magnetic drill with: 2-speed motor. Coolant system. Robust mobile storage / carrying bag. MAGNET HOLDING FORCE 1800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Steel folder , 2 knifes , 6 pockets

Table 1120x4000mm 2 milling and 2 planing heads, and 1 grinding head Workpiece dimensions WxH 1250x1120 Spindle speed: - Vertical (stepless) 5...1800 rpm - Horizontal (4 speeds) 100;200;500;1000 rpm Limits of working feeds at milling: - of a table 25...10000 - Supports and movable-sleeves 5...2500 Stroke length Sliders 300 mm Power of electric motors: -table in a planing mode 90kW -vertical spindle 30kW -vertical horizontal 22/26kW Machine overall dimensions: 10600x5400x4600 mm Machine weight 41t

Type: SF 1600x5,2 2D Screen area: 1,600 x 5,200 mm with plastic sieves Electric drive 22 kW semi-mobile steel construction with platform, outlet chutes and outlet tray optional: with feed and pull-off conveyor belt

x-travel: 700 mm y-travel: 235 mm workpiece height: 320 mm table surface area: 630 x 200 mm table load: 500 kp grinding spindle speed: 2680 U/min adjustment of spindle-head: 365 mm stroke speeds: 2 - 30 m/min cross travel: 200 mm adjustment 1 division =: 0,05 mm grinding wheel size: 250 x 25 x 75 mm voltage: 380 V / 50 Hz hydraulic motor: 1,1 kW grinding motor: 2,2 total power requirement: 4 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2,0 x 1,6 x 2,0 m magnetic plate 570 x 200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

M. No.: 85039 // Model: 371 Equipment / Additional information: Ø max. 15 mm Distance between drills: 60-120 mm

Used Inject Star HS L750 vacuum tumbler is completely made of stainless steel. The vacuum tumblers are used in meat processing plants for marinating and massaging of muscles and red meat elements, poultry elements or seafood. This vacuum tumbler has two drive-out drums. The device has the ability to adjust the speed of the drum and the direction of rotation, run time and pause. Set dimensions: L:1800 x W:1300 x H1900mm Drum capacity: 750l Batch capacity: around 400 kg Power: 3.3kW Set weight: 760kg

STAHL FOLDER TF 56-44- FE -Year 1991, paper size max 56x95 cms. -High pile delivery with Tremat -Four buckles in first station with anti noise hoods -Four buckles in second station -Counter, air pump -Delivery, All rollers in nice conditions -In production, Available at the end of January

Crane arm for forklift STABAU Type KR 15 Fabr. No. 003-14276 Year of construction 1986 Nominal load 1500 kg load capacity at 450 mm radius 1500 kg load capacity at 750 mm radius 1100 kg load capacity at 1200 mm radius 750 kg Suitable for fork carrier FEM 2 = 403 mm Load hook adjustable in 6 steps Total height of the crane arm 1350 mm Boom profile 110 x 110 mm on mobile transport frame good condition; used

E-chain hoist, electric hoist, crane STEEL type R 12 Fabr. No. 3437532 Year of construction 1979 Payload: 1250 kg Hook travel: 2.4 meters Lifting speed: 8 m/min. Fine lifting speed: 2 m/min. 2 load trains = 1250 kg Engine power: 1.25 / 0.25 kW mains connection 380 Volt, 50 Hz - chassis self-made - without chainbag good condition; used

E-chain hoist, electric hoist, crane STEEL type T 201-10/2,5 1/1 Product no.: 1204075 Year of construction 1989 Load capacity 125 kg Hook travel = lifting height 4.7 meters Lifting speed 10 m/min. Fine lifting speed 2.5 m/min. 1 load rank = 125 kg cable length control bottle approx. 2 meters mains connection 400 volts, 50 Hz. - Suspension eyelet on the top of the crane Weight: 20 kg good condition; used

E-chain hoist, electric hoist, crane STEEL type Si T 201-10/2,5 Product code: 1202373 Year of construction 1989 Load capacity 250 kg Hook travel = lifting height 3.5 meters Lifting speed 10 m/min. Fine lifting speed 2.5 m/min. 2 load ranks = 250 kg cable length Control bottle approx. 1.4 meters Mains connection 400 volts, 50 Hz. - Suspension eyelet on the top of the crane Weight: 22 kg good condition; used

Seven axis machine with turret (type 420) - with Iemca MiniBoss 325/44 (max lenght 4400 mm) - well equipped (fixed/driven tool holders, collets for barfeed and lathe, guide bushings) - chip conveyor - Fanuc 16-TC Control

Air forging hammer Stanko MB 4134 Year of manufacture: 1988 Nominal weight of falling parts, kg: 250 Energy of impact, Kj: 5,6 The greatest number of impacts in a minute: 150 Ram axis-to-frame distance, mm: 420 Working zone daylight, mm: 450 Die impression size, mm: 510 x 80 Main electric motor power kW: 22 Weight of a hammer with an anvil-block, kg: 7850 Price 6500 EUR

Spiral Bevel Gear Generator Stanko 5C280P gear diameter 800 mm, module 16 Max gear ring width 125 mm, Spindle speeds range 20-125 rpm, Main motor power 7,5 kW, Overall dimensions LxWxH 3235x2180x2200 mm, Weight 15 tons.