mubea muhr und used for sale

Under table saw Wadkin Cutting width 300 mm Cutting height 80 mm pneumatically raised with rolling table and stop L 2.0 m L x W x H: 2.5 x 0.8 x 1.1 m Weight approx. 480 kg Built in 1975 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Diameter cable: approx.18 to max. 180 mm Separation speed: approx. 32 m/min Drive control: approx. 11 kW Dimensions: approx. 1880 x 1400 x 1560 mm Weight: approx. 1,900 kg Knife adjustment: hydraulic Height adjustment: hydraulic Condition: used, operational

DEMONSTRATION MACHINE Cable cutting machine Maxi 100 Manufacturer: Grimo Diameter cable: 6 - 100 mm Separation speed: 40 meters per min Dimensions (L x W x H): 700 x 700 x 1270 mm Weight: 165 kg Drive: 2.2 kw / 400 V Knife adjustment: mechanical

Underfloor drilling unit suitable for IMA - incompatible with a Weeke plug

: 5000 kg height: 800 mm width: 1200 mm : nein : 1200 x 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 5000 kg height: 500 mm width: 1200 mm : nein : 1200 x 100 mm : 1,2 x 0,53 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 15000 kg height: 790 - 1350 mm width: 2000 mm : ja : 120 x 2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

New devices that are no longer needed Product information "Eaton Undervoltage Release, 208-240VAC 259499" The Eaton Low Voltage Release, 208-240VAC 259499, is an optional accessory that offers an extensive portfolio of applications for worldwide use. Its installation is flexible and easy thanks to modular functional groups. The use of the undervoltage release enables an immediate shutdown of the circuit breaker NZM, or switch-disconnector N when the control voltage drops below 35-70% US. The undervoltage release, when de-energized, prevents the main switch contacts from touching during switch-on attempts, which ensures high safety. The undervoltage release is not at the same time as leading auxiliary switch NZM. -XHIV.. or working current release NZM.. -XA.. can be installed. It is suitable for circuit breakers and load switches. The rated control supply voltage Us at AC 50 Hz is  ...

The C500 sub-vacuum consists of a double bell to optimize the packaging process. It allows the packaging of products under vacuum and in a protective atmosphere. Each bell has 2 welding bars. TECHNICAL DETAILS: - Machine dimensions (d x w x h): 1050 x 1600 x 1065 mm. - Bell dimensions (d x w x h): 745 x 650 x 200 mm. - Weight: 650 kg. - 4 casters including 2 directional - Synthetic loading plates for the bell. - Bell in standard execution. - Bell cover for bell height 200mm. - 2 parallel weld bars, l = 650 mm, front and rear. - BUSCH pump of 250 m3 FEATURES: - Auto shut-off function with boiling point recognition. - Fully graphic display - Emergency vacuum stop - Intuitive operation - Accurate vacuum measurement via vacuum detector - 18 selectable languages - Program brief for 29 recipes.

IMMEDIATELY AVAILABLE - video link on request CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - aluminum - bronze - GRP (glass fiber reinforced plastics) - wood - copper - brass and various plastics such as PVC and polyamide. Drilling (through holes and blind holes – step drills  ...

Electron welding system under VACUUM 2001 (modernized in 2010) Factory No.: 6201120

: 2000 kg height: 500 mm width: 1200 mm : nein : 1200 x 100 mm : 1,2 x 0,53 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 15000 kg height: 790 - 1350 mm width: 1200 mm : ja : 790 - 1350 mm : 120 x 1200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 2000 kg height: 500 mm width: 1200 mm : nein : 2000 x 100 mm : 2,0 x 0,53 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 2000 kg height: 800 mm width: 1200 mm : nein : 1200 x 100 mm : 1,2 x 0,8 x 0,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 2000 kg height: 1080 mm width: 1500 mm : nein : 1500 x 100 mm : 1,5 x 0,53 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Comments: used engine block only Item Code: 1109094u Scope: Undefined Block manufacturer: Jenbacher Engine Type: J Engine Serie: 320 Gas Type: Biogas Eng Ser No: 4868381 powerup.at - Technology is our drive. Efficiency our focus.

offer 22543 Specifications: - Saw blade dimensions 350 x 3.2 x 40 mm - Saw blade speed 3200 rpm - Cutting range at 90° 115 mm - 115 x 120 mm - 200 x 80 mm - Miter adjustable left + right - Drive 400 V / 2.0 kW - Space requirement approx. W 700 x H 1500 x D 900 mm - Weight machine approx. 80 kg - with: - Saw blade - Clamping pole - Stop rail 3000 mm

Mixer 78L without blades Height 1m85 Width length 1m Inspection window Pressure regulator Total drain valve Heating belt 2500W 300°C single-phase Agitator with variable speed drive, three-phase 380V Interior lighting Wall thickness: 2cm

There is a complete underwater pelletizing system with vibrator, heat exchanger, centrifuge, extruder, pelletizer, water basin, sieves, knife blocks, documentation and other spare parts available, a sieve changer is available separately, an inspection is possible.

Substructure clamp, pneumatic power clamp, with retractable centering mandrel and integrated clamping hook TÜNKERS SZD 50 UZ SZD 50 UZ 29.9-0.05 ( SZD50UZ29.9-0.05 ) Centering mandrel: Diameter: Ø 28 mm, length (extended): 46 mm with sensors used, tested ! Dimensions: 375 x 100 x 105 mm

Substructure clamp, pneumatic power clamp, with retractable centering mandrel and integrated clamping hook TÜNKERS SZD 50 UZ SZD 50 UZ 29.9-0.05 ( SZD50UZ29.9-0.05 ) Centering mandrel: Diameter: Ø 30 mm, length (extended): 36 mm with sensors used, tested ! Dimensions: 365 x 100 x 105 mm

Foil set HASBERG Size: 100 x 500 3 x 0.1 mm 4 x 0.3 mm 5 x 0.4 mm 3 x 0.5 mm Stainless ! New ! Dimensions(packed): 515 x 115 x 70 mm

Unterstellbock HÖSEL HEBETECHNIK SEF 513 F Load capacity: 15000 kg Support surface: 1200 x 120 mm Support height: 820 - 1260 mm, adjustable in 10 steps used, tested ! As good as new ! Dimensions: 1320 x 700 x 820 mm

Very good machine from our demonstration pool. Few hours of operation or signs of use. The peeling machine is suitable for XLPE cables, underground cables, cables with steel armouring, cables with aluminium and lead armouring, but also for processing PVC and rubber cables. With this machine, two cuts can be made at the same time in one operation, so that the processing can be twice as fast as with other models. Technical data: Working range/cable diameter: 30 mm to 150 mm Pulling speed: max. 12 m/min Motor: 2x 3.0 kW - 400 volts Dimensions (LxWxH): 1.8 x 1.0 x 1.2 m Weight: approx. 660 kg

Durable construction that facilitates maintenance work under all bridges. Thanks to the solid construction, it is possible to load a large number of tools or employees on the lower part. The machine equipped with large wheels in good condition, and hydraulic brakes makes it possible to move under and work without entering the bridge. Ixkmdlnmh Possible transport in Polish and Europe, of course, by prior arrangement. Wagon under the bridge - Specially developed trolley for work under bridges - Very stable construction - Everything in the price or you get a set - The trolley is controllable and equipped with air brakes - Dimensions approx. 12 meters long without pulling, drawbar approx. 1.5m. 2.5 meters wide and 3.1 meters high

Complete BOSCH line for sterile ampoules filling under isolator Production: 400 ampoules per minute working range • Diameter : From 9 up to 30 mm • Height : From 60 up to 160 mm • Formats incluided :1 - 2ml The machine comes with ISOLATOR and DEDICATE AHU AND CIP/ SIP IPC (weigh control ampoules)

Underwater electric pump, submersible pump, well pump, deep well pump -Drive: 8.2 kW -Output: 1800 l / min -Speed: 2900 rpm -Pump length: 1260 mm -Flange outer diameter: 220 mm -Flange inside diameter: 100 mm -Pump diameter: 170 mm -Weight: 150 kg

Underwater electric pump, submersible pump, well pump, deep well pump -Drive: 8.2 kW -Output: 1800 l / min -Pressure performance: 2.5 bar -Delivery head approx. 25 m -Speed: 2900 rpm -Pump length: 1260 mm -Flange outer diameter: 220 mm -Flange inside diameter: 100 mm -Pump diameter: 170 mm -Weight: 150 kg

Underwater electric pump, submersible pump, well pump, deep well pump -Drive: 18.5 kW -Output: 3000 l/min -Pump length: 970 mm -Flange outer diameter: 245 mm -Flange inside diameter: 125 mm -Pump diameter: 210 mm -Weight: 180 kg

Underwater electric pump, submersible pump, well pump, deep well pump -Drive: 18.5 kW -Output: 3000 l/min -Pump length: 960 mm -Flange outer diameter: 250 mm -Flange inside diameter: 125 mm -Pump diameter: 210 mm -Weight: 170 kg

Underwater electric pump, submersible pump, well pump, deep well pump -Drive: 18.5 kW -Performance: 41.6 l/sec -Pump length: 1550 mm -Flange outer diameter: 250 mm -Flange inside diameter: 130 mm -Pump diameter: 175 mm -Weight: 235 kg

Underwater electric pump, submersible pump, well pump, deep well pump -Drive: 5.8 kW -Output: 1500 l/min -Pump length: 1350 mm -Flange outer diameter: 250 mm -Flange inside diameter: 130 mm -Pump diameter: 210 mm -Weight: 170 kg

Electric heating, electric radiator, heating coil, electric tubular heating element, floor convector -Length: 3900 mm -Width (depth): 260 mm -Height: 145 mm -Price: per piece -Number: 2 pieces -Weight: 41 kg/piece

Underfloor heating clip fixers, -Clipmaster: 17 -in the suitcase -Dimensions: 930/250/H80 mm -Weight: 5.8 kg

Gray cast iron underfloor box -Manufacturer: Bethmann lightning protection and lightning protection Kransteiner -Opening: 115 x 170 mm -Number: 3x available -Price: per piece -Dimensions: 272/195/H115 mm -Weight: 5.2 kg

The cable peeling machine "MASTER 140" is suitable for peeling XLPE cables, underground cables, cables with steel armouring, cables with aluminium and lead armouring, but also for processing PVC and rubber cables. In contrast to other underground cable machines, which usually only have one blade, the "Master 140" cuts with two blades at the same time – this saves you an additional pass if necessary. To push the cable halves apart, expansion wedges can be screwed on. Both blades can be individually adjusted to the desired cutting depth. Due to concave tension rollers, the cables are less compressed at the cut surfaces, cores from (lead) sheathed cables can be removed more easily. Specifications: Working range/cable diameter: 30 mm to 150 mm Pulling speed: max. 12 m/min Motor: 2x 3.0 kW - 400 Volt Dimensions (LxWxH): 1.8 x 1.0 x 1.2 m Weight: approx. 660 kg

Comments: Engine Block with new bearings for cranshaft and camshaft. Including also some lose parts for Shortblock. Unfortunately Design Number and Service History unknown. Item Code: 1110434 Scope: Undefined Block manufacturer: Jenbacher Engine Type: J Engine Serie: 212 Gas Type: Natural Gas powerup.at - Technology is our drive. Efficiency our focus.

Comments: Vers. C501 Depositmotor can be used as Short/Longblock - needs devinetiv overhaul! Item Code: 1110912u Scope: Undefined Block manufacturer: Jenbacher Engine Type: J Engine Serie: 312 Gas Type: Biogas Design No: I810_1 Eng Ser No: 1010704 Orig PoOutput kWm: 392 YoM: 1998 powerup.at - Technology is our drive. Efficiency our focus.

Comments: Vers. B01 Depositmotor Item Code: 1110764u Scope: Undefined Block manufacturer: Jenbacher Engine Type: J Engine Serie: 316 Gas Type: Natural Gas Design No: 5936 Eng Ser No: 1225455 powerup.at - Technology is our drive. Efficiency our focus.

Comments: Crankcase with Camshaft and gear drive, Crankshaft is missing.Only 30k operating hours. Item Code: 1108860u Scope: Undefined Block manufacturer: Jenbacher Engine Type: J Engine Serie: 612 Gas Type: Biogas Design No: D851 Eng Ser No: 5030391 Orig PoOutput kWm: 1029 YoM: 2007 powerup.at - Technology is our drive. Efficiency our focus.

Comments: prebuilt engine - Version C Crankcase with crankshaft and Camshaft Item Code: 1108697o Scope: Undefined Block manufacturer: Jenbacher Engine Type: J Engine Serie: 612 Gas Type: Natural Gas powerup.at - Technology is our drive. Efficiency our focus.

Offered are 3 pieces of used underride silos, with vertical ladder, blow-in line. 60 tons.

Article number: 19-03-027 Manufacturer: Mep Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1991 L x W x H: ca.700x900x1100mm Weight: approx. 150kg Saw blade dimensions: approx. 400x3,6x40mm Saw blade speed: approx. 2800 rpm Accessories  Pneumatic clamping  Saw blade  Miter-adjustable back stop Other accessories on request Price and other technical data on request

P404 - used approx. 50 m³ / 50,000 L polyester silo, GRP silo, with undercarriage. Technical details: Capacity: approx. 50 m³ / 50,000 litres Material: Polyester / GRP silo Manufacturer: Reich Tank Year of construction: 2.000 Specific gravity: min. 1.2 kg/L Test mark: Z-10.2-163, DIBT is supplied. Dimensions: approx. Ø 3.00 m × H total 12.00 m / frame approx. W 3.00 m × D 3.30 m × H 3.00 m Miscellaneous: Used polyester silo in good condition, former salt silo. Standing silo made of GRP, dome on top of the roof, several inlets and outlets. Incl. load-bearing steel construction / undercarriage. Cleaned inside and out, roof repainted. The silo is sold, as you can see in the pictures. Attachments such as pipes, fittings and accessories are not included in the purchase price. We leave the parts at the silo, but during transport and dismantling, something can break in the ...

Silver coin Luxembourg 20 Francs undated (1946) UNC, silver .835 rough weight 8.5 gr, tarnished, KM 47, hamlet 285

Silver coin Luxembourg 250 Francs undated (1963) UNC, silver .835 rough weight 25 gr, KM 53, hamlet 293

Description: 2 set with 4 trestles Carrying capacity 1 x 6 t and 1 x 3 t Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 600 mm, weight approx.: 80 kg

- NEW - Description: - Robust welded steel construction - Workpiece is automatically fixed with each cut by saw blade cover - The saw blade is moved upwards via a pneumatic cylinder and dips back into the machine body after each cut - Saw blade feed infinitely variable via adjusting screw on the front of the machine - Effective chip and intrusion protection made of Plexiglas - High operating safety due to two-hand control - Standard with 1m roller conveyor to the left and right of the machine, and material stop with scale - Saw blade change via large side door Technical data: General information Saw blade speed(s) 3000min¯¹ Saw blade diameter 500mm Saw blade bore 30mm Saw blade thickness 4mm Mitre angle no Suction nozzle diameter 125mm Sound pressure level89dB(A) Dimensions and weights Length (product) approx. 3000mm Width/depth (product) approx. 1600mm Height (product) approx. 150 ...

- Installation JIG for PIP Underlayer - HP Part Number MJX-1336-51 - for HP Indigo Series 2 Machines