mubea muhr und used for sale

Hydraulic Press 1300 T force very good condition Under power

Plate diameter 4200 mm Maximum turning diameter 4600 mm Max workpiece height under the cross member 4000 mm Max workpiece weight 100 t Travel RAM horizontal 2600 mm / min Travel RAM vertical 2000 mm / min Tool holder (powered tools) ISO 50 Table speed 40 rpm Main drive 120 kW Number of gear stages 4 Total connection value 180 kW Max torque on the flat disc 40000 kpm Max cutting force per support 10000 kp Crossbar support right and left Largest vertical path of the Chisel slider 2000 mm Cross-section of the chisel slider 285 x 310 mm Adjustment path of the crossbar 3500 mm Total weight of the machine 115,800 kg Accessories Automatic lubrication of the cross-bar guide on the stand Hydraulic weight compensation of the chisel sliders Milling spindle and C-axis c-axis 360,000 positions

Ladies and gentlemen, below we offer the following machine for sale: from a tool making, single-layer run and very well maintained. Still under power. CNC lathe Voest - Alpin - Weipert WNE 490 X 1000, peak height 240mm, tip width 1000mm, control Siemens, circulating through mes.over bed 490mm, circulating permes.via plan slide 195mm, crimping 520mm, Spindeldurchmes.im front. Bearing 100mm, spindle bore 63mm, torque 736Nm.

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN iTNC 530 Operating hours: 12463 Technical data Number of axis simultaneous: 3 Table length: 700 mm Table width: 630 mm Table load max.: 800 kg Longitudinal travel (X-axis): 600 mm Transversal travel (y-axis): 600 mm Vertical travel (z axis): 500 mm Tool magazine number of tools: 30 Tool diameter max.: 75 mm Tool lenght: 210 mm Max. tool-weight: 2.5 kg Spindle nose: HSK-A: 63 Spindle speeds: stepless from: 100 rpm up to: 24000 rpm Rapid traverse:: 30 m/min Voltage 50 Hz 3x: 400 Volt Spindle motor: 12.5 / 22 kW Total power required: 26 kW Time under power: 43869 Hour Operating time: 12463 Hour Working time: 26214 Hour Spindle run time: 8612 Hour Noise level: 75 dB (A) Machine´s weight about: 8300 kg Overall dim ...

Table diameter: 2,000 mm Max diameter of workpiece: 3,000 mm Main drive: 60 KW Speed rotation of the table: 2.8 - 162 rpm Max workpiece height under the cross member: 2,500 mm Travel RAM: 1,750 mm Tool magazine: 12 workstations Machine Weight: 35 t Accessories: Grinding spindle and various tool holders 3000 rpm Wheel diameter 250 mm

Technical details Cutting width= .40 - .000mm Machine weight approx.: 640 kg Room requirements LxWxH approx.: 1800 x 1350 x 1920mm The machine was little needed, very good condition Extract from the manufacturer Infosheet: Technical data > For single to medium series productionâ Maximum cutting depth: 40mm The machine is in a very well maintained and very good condition and can be visited at any time under electricity by appointment. Subject to changes and errors in the technical details and information provided. Round cuts from 40 to 1000mm - size II Round cuts from 40 to 1500mm - size III The machines P 2000 II and P 2000 III are stand machines in a stable steel construction. They cut cleanly, dimensionally, with a straight cutting edge all cutting-edgeable materials: such as rubber, felt, cardboard, plastics, fibres, graphite with and without inserts, et ...

Capacity: up to 22kg of green coffee per roast (88kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase, 60Hz (other voltages by request) Gas: natural gas/LPG Burner: Probat – direct, modulated Chaff cyclone with a wheeled bin for easy chaff disposal is included with the roaster. A green coffee loader and destoner can also be included. The roaster will undergo a major refurbishing, the process will include: - inspection, sandblasting, cleaning and repairing all of the parts, - installing new insulation, - installing new bearings, - installing a new drum cover, - installing new direct drive motors with speed control on the drum and exhaust fan, - making a new electric cabinet and controls (optional: PLC and touchscreen with automatic roasting and profiling), - installing new cooling bin sheathing, - rebuilding the burner, - building a new c ...

Type of machine: Semi-automatic dosing machine for loose products Portion: up to 2000g (2l) Accuracy: +/- 5g (available option +/- 1g) Power: 230V, 1 phase Emptying: foot-lever Material: food grade stainless steel Hopper volume: 120l (ca.50kg of roasted coffee) Dimensions(H x W x L): 1808mm x 751mm x 743mm LR 2.3 is designed for dosing such products as: coffee beans, nuts, seeds, grains, rice or noodles. The device is working in half-automatic mode. The operator pours the material to be portioned into the main container, then sets the desired weight and starts the dosing process. After weighing the required amount the operator puts a bag under the funnel and empties the weighing container by stepping on a foot-lever. The next charge starts automatically after the weighing container is emptied. In the meantime the operator ha ...

approx. 1500 m2 steel construction stage 1-storey Used goods, good condition, see pictures Manufacturer STOW Length approx. 58.5 m Width approx. 54.6 m Height lower edge 3.4 m Height top edge 3.7 m Load 500 kg/m2 C-Profiles and Sigma Profile Design fastened with screws and nut Grid distances adjustable in length Floor structure is 38 mm chipboard, highly compacted, groove and spring Underside white, top grey coated Negotiation price: Offer on request! Partial sale possible! Disassembled and loaded Goods are in stock. Transport costs possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from s ...

1 x L+Z lathe Colchester Mascot 1600/600 Built: c.1975 Very stable lathe. Ideal machine for locksmiths or agricultural machine mechanics. Technical data: Turning diameter over crimson: 710 mm Turning diameter over bed:432 mm Turning diameter via support:267 mm Turning length: 1,000 mm Spindle speeds:20 - 1600 rpm Spindle bore:76 mm Drive motor:5.6 kW Feeds: 0.6 - 10 mm/u Metric threads: 40 (0.4 - 14 mm incline) Machine weight approx.:2000 kg Room requirements approx.:l:2.65 x w:1.1 x h:1.6 m Accessories: 3 - Jaw lining UVA 310 mm 4 Set of change jaws Bfraed8ae0 Tripan quick-change system 4 x Interchangeable holder running counter tip in tailstock (MK 5) Countertip in spindle Alternating wheels Manual Mudguard complete documentation The machine can be inspected at our warehouse in Reichenbach under electricity.

Machining center vertical S - plus 10 Manufacturer: Hartford BJ: 2016 Control Heidenhain ... TNC 640 Clamping table area ... 1150x520mm Axis X ... 1020mm Axis Y ... 520mm Axis Z ... 550mm Spindle speed ... 12000-_/min. controlled axes... 3 cooling ... 20bar ISO 40 Magazine places... 24 chip Conveyor Workpiece probe The machine is in good condition, possible to test under power.

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 426 Operating hours: 1800 Technical data Number of axis total: 4 Table length: 1150 mm Table width: 700 mm Turret stations:: 60 Longitudinal travel (X-axis): 1000 mm Transversal travel (y-axis): 750 mm Vertical travel (z axis): 750 mm Tool changer:: TC 30 Number of tools: 30 Tool diameter: 77 mm Diameter with free adjacent pockets: 115 mm Tool lenght: 305 mm Spindle nose: HSK: A63 Distance from vertical spindle to table: 115 mm Spindle speeds: stepless up to: 24000 rpm Feed range: 1500 mm/min Rapid traverse:: 22 m/min Voltage 50 Hz 3x: 400 Volt Total power required: 40 kW Time under power: 21859 Hour Operating time: 7308 Hour Spindle run time: 1564 Hour Machine´s weight about: 10500 kg Overall dimensions  ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 18i-TB Operating hours: 9976 Technical data Number of axis total: 5 Swing over bed: 620 mm Turning diameter: 380 mm Bar passage: 52 mm Turning length: 540 mm Longitudinal travel (Z-axis): 600 mm Longitudinal travel (X-axis): 217 mm Transversal travel (y-axis): 101.6 mm Turret slide: number: 1 Number of positions turret 1: 12 Driven tools turret 1: 12 Spindle speeds: 4000 rpm Power of driven tools: 5.5 kW Spindle nose: Inner cone diameter: 40 mm Taper in spindle: Camlock: A2-6" Collet bore: 52 mm Spindle speeds: stepless up to: 4500 rpm Back spindle:: A2-5" max. speed: 6000 rpm Spindle diameter: 45 mm Power of back spindle: 11/15 kW Rapid traverse:: 30 m/min Time under power: 13221 Hour Working time: 8781 Hour Voltage 50 Hz 3x: 400 ...

Machining center vertical Speed 1110 Manufacturer: TRIMILL BJ: 2010 Control Heidenhain ... TNC 530 Clamping table area... 1300x1200mm Axis X ... 1100mm Axis Y ... 1000mm Axis Z ... 700mm Spindle speed ... 30-14000 rpm. controlled axes... 3 HSK A80 Total power demand ... 56kVA Machine Weight... 14500kg Rush.. 20m/min L x W x H ... 4400x5500x3810mm Workpiece probe Heidenhain TS740 Magazine places 10 Spindle cooling only with air new spindle 2017 The machine is in good condition, possible to test under power.

Complete Printshop package: HP DesignJet T7100PS (42 ", 1067 mm) 3 roll feed plotter Printing capacity 9,490 m² see usage report HP DesignJet T7200 (42 ", 1067 mm) 3 roll-fed plotter Printing capacity 74,460 m² see usage report HP DesignJet Z6800 (60 ", 1520 mm) overhauled plotter Printing capacity 1,195 m² see usage report HP PageWide E77660 (50/70 ppm) with finisher (Punsh, Staples) Printer Printing capacity 258,424 (total) see consumption page HP LaserJet 4050 TN (3 trays paper feed) Printer DYMO LabelWriter 310 Printer Konica C754 (1 underfeed bin) Printer including toner (x8) € 25.00 each EFI Model: Color Profiler Spectrometer ES-1000 Spectrometer HP Sanner 4520 (42") scanner Avision AV 220 C2 A4 scanner Avision FB 2080E Scanner A3 Rowe 721-1 (folding width 96 cm) including cross folding Folding machine P ...

Chiron FZ18W Magnum rotopallet 1999 CNC Siemens 840D X 630 Y 400 Z 425 tables (2) 850x450mm 20 tools ISO 40 / 18kW / 140 Nm 40m/min HAWE hydraulics automatic doors swarf conveyor 6 ton 3,6 x 2,25 x 2,85 machine can be inspected under power in our warehouse Mimu Machine Tools (Italy)

Table drilling unit W 100 A Manufacturer: TOS Varnsdorf overhauled: 2019 Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 7-1120 rpm. Axis W ... 900mm Axis Z ... 1250mm ISO 50 Max table load ... 3000kg L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14000kg Main Engine Power... 11kW Total power demand ... 17kVA Clamping table area ... 1250 x 1250mm Flat disc diameter... 600mm Max circulation diameter ... 900mm The machine is possible to test under electricity, with one-year warranty.

Sunnen EC3500, honing machine, also single stroke progressive honing, holes: 1,5 to 165mm dia., spindle motor 5.5HP, auto stone compensation, auto sizing available as option, like new - low hours (1530), More pics available, Under power in our warehouse. Test run possible., Mimu Machine Tools (Italy)

1 x lathe Feinbau PM 1 FZ Facilities: - Hand lever cross support with Tripan quick-change system - additional steel holder single steel holder on support rear - Electric drill rig for thread cutting - collet tension with tension ingenuity Technical data: - Spindle passage: 23 mm - Spindle speeds: 700/1400/2800 rpm (left/right) - Peak height: 110 mm - Tip width: 160 mm - Groesster circulation over bed:220 mm Accessories: 20 x drawer tension erases partly new (1 - 20 mm round) 1 x Interchangeable Holder Tripan with 2 different casts 1 x collet + suit rod in tailstock Operating instructions (Copy) Machine can be inspected under electricity.

Saw blade grinding machine for diameters up to 920 mm The machine can be inspected and tested under electricity, upon request. Saegeleaf diameter: 200 to 920 mm Saegeleaf width: up to 10 mm Number of teeth: 20 to 999 Tooth depth: 0 to 25 mm Tooth pitch: max. 50 mm Grinding wheel diameter: 300 mm Weight: 1,700 kg Saw blade diameter for bevels: 280 - 920 mm

Printshop Package: Folding machine Horizon AFC-504 ACT - with perforating device, or double central cut - 2 swords - folding from DIN A 3 to DIN long possible - Fold types preset under program control - only run with small editions - compact design Price: on request 4 color offset machine Heidelberg GTO VP 52 convertible 2/2 front and back printing Plus version year: 1986 - ALCOLOR with BALDWIN cooling unit - CPC 11.01 - Grafix powder device Replacement, 6 new rollers like photo Price: on request Brochure production line Two towers Horizon MC-8 SPF-10II - FC-II - 1 loop stitching, - Accessories for small formats, corner stapling possible - 1 vibrator (collect carbonless records, etc.) - German Manual Price: on request cutting machine Polar EM 76 - with air table facility - 2 HD knives - Control panel board 2016 new - with hydraulic scissor lift tab ...

1 x Universall tool-feeding machine Lid FP 4 Built: c.1970 Very robust and rare conventional machine in good condition. Technical data: Travel: X: 700 Y: 400 Z: 450 mm Spindle speeds: 31.5 - 1,600 rpm (18 levels) Tool holder: ISO 40 Pinole stroke: 115 mm Feed in X/Y/Z Feed range: X/Y/Z 5 - 500 mm/min (infinitely adjustable) Rapid response: X/Y: 10 - 500 mm/min Z: 5 -250 mm/min (18 levels) swivel handling table Clamping area: 860 x 500 mm Accessories: 1 x horizontal counter bearing 5 x horizontal frond spine Bftj7cazem 10 x vertical fraes aufnahme 36 x tension tension ingesheis from 0.5 - 18 mm 0.5 mm rising 5 x Direct clamping pliers D: 12/14/16/18/20 mm 1 x machine vice Manual various distance rings and accessories for milling machines complete documentation The machine can be inspected at our warehouse under electricity. A 3-axis digital ...

Control cabinet for MAHO 600 - MAHO had manual transmission damage and was therefore exploited. - Are also other parts in stock. Please inquire! Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

Recon - Part number 124.6-25.10.01-03 - grounded to 1 level undersize / 179.5/ 169.5 - incl. counterweights & gears - with new DNV-GL certificate ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Supra pot grinding machine - Width: 400 mm - Depth: 400 mm - Height: 800 mm - Table diameter: 150 mm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

Screw compressor Manufacturer Rota Rotorkomp Compressor Drive power 11KW Operating pressure 11 bar Operating pressure maximum 15 bar Operating hours according to the meter 2,035 hrs. Without compressed air boiler Device ready to be demonstrated under power

- fully functional - was used until recently by an automobile manufacturer - with integrated brake maintenance device ROMESS S22 - Visit by appointment Use: - Testing of brake squid to function Pruef features: - Geraeusche at beta-ether - Tightness in the vacuum range - Tightness in the brake pressure circuits - Uniform pressure distribution in the brake circuits - Pressure build-up in the brake circuits Operation: - The testing is performed "by hand" - The pressure build-up takes place via a deflection mechanism - Manual setting of the vacuum - Filling of the brake device by means of a built-in Romess system and simultaneous disenification of the brake circuits, 33eflt0hx - Extraction of the brake fluid from storage equipment by means of Romess Plant Building: - Stationaerer Pruefplatz - Profile frame construction - Tueren with Mangnet stop - Drawers for a ...

used vertical hydraulic internal clearing machine with 3 clearing points in very good condition Pulling power:8.000 KG Clearance length: 1000mm Bgno2qtoyx Clearing: 3 pieces (4 pieces) Distance between clearing points:100mm Mounting diameter of the drawing heads3 x x 85mm Workpiece diameter: max. 1x 460mm / 2x 198mm / 3x 98mm Cutting speed: hydraulically infinitely adjustable from 1m/min up to max. 7m/min Return speed: hydraulically infinitely adjustable from 5 to max. 25m/min Space requirement of the machine (b x t x h) approx.:1400 x 2000x 3600mm (without service & operator environment) Power supply / connection value: 380Volt 50 HZ / 6.5 KW Accessories / Optional equipment: -manual and automatic clearing operation - Drawbridge for 3 clearing points - Workpiece table for 4 clearing points (only usable with special pullheads) - automatic tool feeder - tension dis ...

<b>Features:</b> Used pallet roller conveyor Condition: Top condition with slight traces of use Material: steel (galvanized) Color: galvanized Professionally dismantled and packaged 10 pieces in stock Price per meter <b>Technical data</b> Manufacturer: Euroroll Condition: Used Colour: galvanised Total length: 2.520mm Removal length: 1,300mm Roller track length: 1.220mm Frame: steel/galvanized Height: 80mm Width: 40mm Incl. 2 brake rollers Diameter: 80mm Pallet namhe and feed element by forklift <b>Pallet roller conveyor</b> Thanks to the excellent workmanship of the pallet roller web, your material glides gently to its destination, even under high loads. <b>Tailor-made logistics for your intralogistics</b> We are your competent contact for roller conveyors, belt conveyors, inclined conveyors o ...

Compounding system with underwater granulation. Material: PE, PP, PS, ABS (+ fillers) // Details: DC motor, DC rotor, segmented screws (2x x 70 mm / 40D) and cylinders, degassing, vacuum pump, stuffing unit, backwash screen changer GNEUSS RSF 150, underwater granulation GALA with cutting rotor, water circulation system, heat exchanger, centrifugal dryer. Controls: SIEMENS S7 with screen visualization. Available at an additional cost: Sidefeeder, 4-fold gravimetric dosing system. (Ref. No. G27615.2)

Height under guides: 0 mm Throat: 0 mm Table length: 0 mm Table width: 0 mm Semi automat electrohydraulic double column Two column construction Perfect rigidity and accurate with fine cut Cutting 90°:       600Ø Cutting flat 90°:  600 x 600 mm Cutting speed Vario:10 - 115 m/min. Circle blade size: 6200 x 51 x 1,3 mm Power:             4kW Length:            3.150 mm  Width:             1.260 mm  Height:            2.250 mm  Weight:            1.750 kg 

CNC Double Column Vertical Lathe GORBREX model TKV525( built on the corp of SEDIN Lathe )Manufacturer: GORBREX – PolandModel: TKV525 Machine is new and build on Customer requestCondition : very good, under powerControl: SIEMENS or other - on Customer request Delivery time: 6 - 12 monthsMachine with warranty!Technical details :Table diameter: 2250 mmDistance between table and ram 0 - 1780 mmDistance between table and lower surface of transversal beam 400 - 2140 mmWorkpiece :Max workpiece diameter 2500 mmPictures are of one which was made for our German Customner and delivered to him last autumn.

Key data: 1435

Turning diameter: 1435 mm Turning length: 0 mm Spindle bore: 0 mm Motor power: 0 HP/kW Fields of application machining of two wheel sets at the same time turning of wheel tyre profiles on wheel sets in situ machining of brake discs on wheel sets in situ machining of single wheel sets machining of coupled wheel sets machining of wheel sets of different gauges on all mainline railway, metro and tram vehicles Rail track gauge:  1.435mm Max. wheel tread Ø:1.400mm Min. wheel tread Ø:500mm Number of slides:  2 + 2  Power:             2 x 30 kW Length:            7.000 mm  Width:             8.000 mm  Height:            2.600 mm  Weight:            32.000 kg  The tandem a ...

Film recycling and granulation plant Material: PE, PP, // Cascade extruder, snail/LD x 220+150/ x 26D, drives 232 & 99 kW, water separator, hot tee with underwater cooling, only 8,500 operating hours

The machine has been dismantled and has been in our warehouse since 2015, it is used and was in use in a turkey slaughterhouse with underbeam, conveyor belt and articulated rupee.

Key data: 630 _Unknown / Other, 3000 Style

Turning diameter: 630 mm Turning length: 3000 mm Turret positions: 0 CNC Brand: _Unknown / Other CNC Model: Style C-Axis Barufaldi Revolver 8 positions live driven tools SCHUNK chuck Renishaw taster Under power 02.2022 Swing over bed Ø:        630mm Swing over cross slide Ø:405mm DBC Turning Length:      3.000mm Spindle bore:            104mm Spindle power:           40kW Bed width:               450mm Tailstock spindle Ø:     105Ø Stroke pinole:           225mm Spindle taper:           5Mk Workpiece weight:        1.500Kg Speeds / ranges:         2000Rpm Feed rate X-Axis:        8.000mm/mi ...

Sell a pot grinding machine from Ahtena FRC Rolo Camurri technical data: 2850 rpm 2.2 Kw 50Hz; 380V; 5.3A Permanent magnet / clamping magnet 150mm250mm Distance under edge grinding stone to magnetic top edge approx. 170mm with coolant pump otherwise technically good condition

A paper drill is sold. This was in use until its closure about 5 years ago. Machine can be inspected under electricity

Height under guides: 0 mm Throat: 1050 mm Table length: 750 mm Table width: 800 mm MACH-id         6046 MAKE              Mossner TYPE                SSF 1050 YOP                  1991 SPECIFICATIONS Cutting         90°1000 Ø Cutting speed Vario         18 - 160 / 240-2280 m/min. Power            5,5 kW DIMENSIONS Length            1600 mm Width             1000 mm Height            2200 mm Weight           1740 kg - Wheel size : 500 - Table size: 750 x 800 - Troath: 1050  

Laser cutting machine Trumatic L3030 Manufacturer: trump BJ: 2005 Max workpiece length ... 3000mm Max. workpiece thickness ... 1500mm Max sheet thickness ... 12mm Laser power ... 2000w Total power demand ... 71kVA Machine weight ... 11500kg L x W x H ... 9800x5300x2000mm The machine is in good condition, possible to test under power.

CATALOG NO. HZ017 PRODUCT FEATURES The manufacturer guarantees the quality of treatment The use of technology Viber shaking off Power is another milestone in the production of high-performance exhausts sawdust, which aim to provide the same fixed parameters during the entire extraction cycle. Lashing equipment in the electronics and engine technology Power Viber allows you to constantly monitor the status of dust The automatic vibratory cleaning the filter cloth - during the break, and during operation of the filter allows for constant monitoring of correct operation. The filter used in our odciągach was built from the filter elements of the expansion element, in which you enter the pipe. It is intended to produce a large expansion of air and, consequently, will result in free fall all sawdust and other waste containers / bags. Reliability confirmed by the factories every day s ...

Lifting capacity: 50000 kg Hoist height: 10000 mm Span length: 19380 mm Type: Overhead crane   MACH-id     5339 MAKE         ABUS TYPE           ZLK YOP            SPECIFICATIONS Span         19.380 mm Lift height           10.000 mm Lifting speed        0,66 / 4 m/min. Hoist trolley          5 / 20 m/min. Crane driving        10 / 40 m/min. Hight under roof      2020 mm DIMENSIONS Length         21000 mm Width           5460 mm Height          2200 mm Weight          22860 kg

Material: PS, PE, PP, PA, // Details: DC motor 145 kW, screw revolutions: up to 600rpm, screw diameter 70 mm, L/D 32, segmented screws and cylinders, degassing (optional vacuum pump), control: Siemens S7 with visualization. incl. strand nozzle with water bath and strand granulator, motor up to 265kW possible. For extra charge: underwater granulation, or water ring granulation

Lifting capacity: 16000 kg Hoist height: 10000 mm Span length: 19380 mm Type: Overhead crane   MACH-id   5338 MAKE        ABUS TYPE         ZLK YOP           2006 SPECIFICATIONS Span       19.380 mm Lift height       10.000 mm Lifting speed        0,8 / 5 m/min. Hoist trolley         5/20 m/min. Crane driving       10/40 m/min. Hight under roof        1300 mm DIMENSIONS Length      21.000 mm Width           4110 mm Height          2020 mm Weight         10020 kg

Material: PE, PP, PS, ABS, / Details: double screw, runner, segmented screws + cylinder, hydraulic. Cassette sieve changer, strand nozzle, 6m water bath, strand granulator, additive dosing. 3-fold degassing (vacuum pump vs. extra charge), For an additional price: dosing system, water ring or underwater granulation.

Catalog number H0242 - new machine, in stock - CE certificate - max diameter of the blade 400mm - adjustable up / down wheel and 45 degree angle - cutting length 3200mm - cutting width 1350mm - Cutting height 90 ° / 45 ° - 120 / 75mm - trolley on steel bars - the diameter of the undercut 120 x 20 mm - saw blade rotation of 3000.4000.5500rpm - undercut speed of 9000rpm - 5.5 kW / 400 V motor - Subcutaneous motor 1,1 kW - digital display - electric saw setting Overall dimensions: - length 3220mm - width 3150mm - height 900 mm - weight 800kg - the table extension - widening the table - angle cutter Complete with main blade and cutting disc Net price: 20670 PLN Net price: 4921 EUR calculated according to the price of 4,20 euros (With higher fluctuations the price may change)

Material: PE, PP, PS, ABS + talc, fibers / Details: twin-screw extruder PLAMA ZSP 70, segmented screws and cylinders, DC motor 260 kW, degassing, vacuum pump, side feed, low temperature control unit SINGLE, 4+1 gravimetric dosing BRABENDER incl. working platform, screen changer GNEUSS RSF 150, start-up crossover, underwater granulation GALA MAP6 with cutting rotor, water system, heat exchanger, centrifugal dryer. Controls: SIEMENS S7 with screen visualization SIEMENS Multi Panel 270B Touch. Power: approx. 600 - 800 KG/hr

Height under guides: 0 mm Throat: 0 mm Table length: 0 mm Table width: 0 mm MACH-id       5365 MAKE           Carif Italia TYPE              320 BA CNC YOP                2015 SPECIFICATIONS Cutting 90  °  275  Ø Cutting flat    90°    320 x 265 mm Cutting 45°       130 Ø Feed single stroke          50 mm Feed multiple stroke        9000 mm Cutting speed Vario        14 - 120 m/min. Saw band size           3025 x 27 x 0,9 mm Power         2,2 kW DIMENSIONS Length       2800 mm Width         2000 mm Height  ...

Compounding system with GALA underwater granulation Material: PE, PP, PS, ABS // Details: segmented screws and cylinders, screw diameter 2x 40 mm, L/D 44, DC rotor, DC motor 104 kW with gearbox, worm speed: max. 1,200 rpm, 2-fold degassing, ground pressure transducer, start-up valve, water box, Gala A1PAC6 underwater granulation with water circulation system and centrifugal dryer, temperature control unit SINGLE STW 150/1-6-100-NS/E, 6-fachimetric dosing incl. control. Control: Macromatex. Power: approx. 200 - 400 KG/hr

Work Envelope (WxDxH) (mm): 1600x500 Work Handling Method: Grit Sand   Other Info: 4 blasting turbines - Make : Rösler Germany - Typ : RRB 16/5 - Serial : WO 1576 - YOP : 2008 - Max. width : 1.600 - Max. height : 500 - Minimum product length : 2.300 - Minimum thickness : 6 - Workpiece weight Kg : 1.250 - Working speed M/min : 0,5–3 - In feeding height : 800 - 4 blasting turbines - Power 11 kW - Speed 100 M/sec - Roller conveyor feeding in - Roller conveyor feeding out - Filtration System ROSER RF 75/9 P/w Capacity 7500M³ - Under power up to 03.2020 - Incl. double brushes for cleaning - Return to sender for grit sand