mubea muhr und used for sale

Comments: Engine Block with new bearings for cranshaft and camshaft. Including also some lose parts for Shortblock. Unfortunately Design Number and Service History unknown. Item Code: 1110434 Scope: Undefined Block manufacturer: Jenbacher Engine Type: J Engine Serie: 212 Gas Type: Natural Gas powerup.at - Technology is our drive. Efficiency our focus.

Comments: Vers. C501 Depositmotor can be used as Short/Longblock - needs devinetiv overhaul! Item Code: 1110912u Scope: Undefined Block manufacturer: Jenbacher Engine Type: J Engine Serie: 312 Gas Type: Biogas Design No: I810_1 Eng Ser No: 1010704 Orig PoOutput kWm: 392 YoM: 1998 powerup.at - Technology is our drive. Efficiency our focus.

Comments: Vers. B01 Depositmotor Item Code: 1110764u Scope: Undefined Block manufacturer: Jenbacher Engine Type: J Engine Serie: 316 Gas Type: Natural Gas Design No: 5936 Eng Ser No: 1225455 powerup.at - Technology is our drive. Efficiency our focus.

Comments: Crankcase with Camshaft and gear drive, Crankshaft is missing.Only 30k operating hours. Item Code: 1108860u Scope: Undefined Block manufacturer: Jenbacher Engine Type: J Engine Serie: 612 Gas Type: Biogas Design No: D851 Eng Ser No: 5030391 Orig PoOutput kWm: 1029 YoM: 2007 powerup.at - Technology is our drive. Efficiency our focus.

Comments: prebuilt engine - Version C Crankcase with crankshaft and Camshaft Item Code: 1108697o Scope: Undefined Block manufacturer: Jenbacher Engine Type: J Engine Serie: 612 Gas Type: Natural Gas powerup.at - Technology is our drive. Efficiency our focus.

Offered are 3 pieces of used underride silos, with vertical ladder, blow-in line. 60 tons.

Article number: 19-03-027 Manufacturer: Mep Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1991 L x W x H: ca.700x900x1100mm Weight: approx. 150kg Saw blade dimensions: approx. 400x3,6x40mm Saw blade speed: approx. 2800 rpm Accessories  Pneumatic clamping  Saw blade  Miter-adjustable back stop Other accessories on request Price and other technical data on request

P404 - used approx. 50 m³ / 50,000 L polyester silo, GRP silo, with undercarriage. Technical details: Capacity: approx. 50 m³ / 50,000 litres Material: Polyester / GRP silo Manufacturer: Reich Tank Year of construction: 2.000 Specific gravity: min. 1.2 kg/L Test mark: Z-10.2-163, DIBT is supplied. Dimensions: approx. Ø 3.00 m × H total 12.00 m / frame approx. W 3.00 m × D 3.30 m × H 3.00 m Miscellaneous: Used polyester silo in good condition, former salt silo. Standing silo made of GRP, dome on top of the roof, several inlets and outlets. Incl. load-bearing steel construction / undercarriage. Cleaned inside and out, roof repainted. The silo is sold, as you can see in the pictures. Attachments such as pipes, fittings and accessories are not included in the purchase price. We leave the parts at the silo, but during transport and dismantling, something can break in the ...

P393 - used approx. 45 m³ / 45.000 L polyester silo, GRP silo, with undercarriage, completely repainted. Technical details: Content: approx. 45 m³ / 45,000 litres Material: Polyester / GRP Silo Manufacturer: Theodor Vanck GmbH Density DIN 1055: max. 1.4 Kn/m³ DIBT: Z-10.2.2-22 Dimensions: approx. Ø 3.00 m × H total 14.00 m / H GRP cylinder 9.00 m Undercarriage measured externally, i.e. incl. steel girder approx. D 2.56 m × W 3.96 m Undercarriage measured inside, i.e. without steel beam approx. D 2.16 m × W 3.46 m × H 3.70 m Other: Silo and undercarriage were repainted by us, see photos. All parts fit on a truck. Used polyester silo, cleaned, in good condition, former salt silo. Standing silo made of GRP, on load-bearing steel structure / undercarriage, dome on top of the roof, several inlets and outlets. Incl. ladder and railing on top of the silo, see photos. Th ...

Cutting height 125 x 125 mm 100 x 250 mm - Table dimensions 660 x 700 mm - Saw blade Ø 450 mm - Motor 5.5 kW / 400 V - Speed 3600 rpm

Mixer 78L without blades Height 1m85 Width length 1m Inspection window Pressure regulator Total drain valve Heating belt 2500W 300°C single-phase Agitator with variable speed drive, three-phase 380V Interior lighting Wall thickness: 2cm

Brother B 272 Bottom deck stitch machine 6.4 mm or 4.8 mm (with piping device) good condition Price per machine

Silver coin Luxembourg 250 Francs undated (1963) UNC, silver .835 rough weight 25 gr, KM 53, hamlet 293

Description: Machine number: 176432 Operating voltage: 380 V Frequency: 50 Hz Rated current: 5 A Connection: 2.2 kW Speed: up to 2000 rpm Saw blade diameter: 400 mm weight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 700 x 800 x 1,300 mm

Linpac 15pcs. transport trolleys for Trolley euroboxes underframe 800x600x200 mm 300kg load capacity RA2210 Technical data: Length: 800 mm Width: 600 mm Height: 200 mm Load capacity: 300 kg for two paralell euroboxes Material: stable plastic body Underride height: approx. 100 mm Weight: approx. 9.1 kg Configuration: 2 steering and 2 fixed castors Purchase quantity 15, stacked L x W x H approx. 800 x 600 x 2270 mm Total weight: approx. 136.5 kg Year of manufacture: unknown Stackable: yes, through cutouts Condition: Used / fully functional Color: red Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Height in mm: 200 Width in mm: 600 Länge in mm: 800 Traglast kg: 300 For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. W ...