mtu mb used for sale

Ser. No.: L. 09/31 // Fabr. No.: 0270180/1 Pockets : 4 parallel fold Format (mm): max. 297 x 420 // min. 148 x 210 Equipment / Additional information: With delivery A45/1A-DC Power 400V

Didar Part Number 0697210001 NSN 12-334-8788 Original Part Number 0020984220 In-Pipe Water Pressure 3 – 4.5 bar Out of Pipe Air Pressure 4.5 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 200 °C Amount of Water in the Pipe 10 Lt. Amount of Air Outside the Pipe 44 Lt.

Manufacturer: SHW Type: UF6 Rigid Tower Year of construction: 1980 Tool holder: SK 50 Travel X, Y, Z: 3000, 1500(1200), 1600 mm Table: 3000x1200 mm Condition: untested (used) Speed: 1800 1/min Feeds: 1 – 8000 mm / min Rapid traverses: 8 m / min Drive power: 32KW Other: -Safety clamping bolts This machine is not ready for operation, it is ideal for control conversion. The mechanical condition is very good. About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization

Didar Part Number 0688910002 NSN 12-F12-5835 Original Part Number 0010981320 In-Pipe Water Pressure 4 – 6 bar Out of Pipe Air Pressure 4 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature1 80 °C Amount of Water in the Pipe 8 Lt. Amount of Air Outside the Pipe 28 Lt.

Manufacturer: SHW Machine Tools Type: UF 21 / UF 31 Routes X,Y, Z: 1000, 700,625mm Control: -Machine 1: Heidenhain TNC 355 -Machine 2: Heidenhain TNC 415 Table: NC rotary table 1100x840mm Automatic swivel head Pinole 120mm Milling spindle holder SK 50 Speed 2500rpm Since we offer several machines from this series, the advertised images are exclusively sample images of comparable machines. Feel free to provide us with your individual (control, table size, tilt & tilt Setup, etc.) Inquiry so that we can offer you a machine that meets your requirements. MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare pa ...

Didar Part Number 0688910002 NSN 12-F12-5835 Original Part Number 0010981320 In-Pipe Water Pressure 4 – 6 bar Out of Pipe Air Pressure 4 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature1 80 °C Amount of D153928 Water in the Pipe 8 Lt. Amount of Air Outside the Pipe 28 Lt.

Manufacturer: SHW Machine Tools Type: UF 41 Routes X,Y, Z: 1000, 700,750mm Control: Heidenhain TNC 415 Table: NC rotary table 1100x840mm Automatic swivel head Pinole 120mm Milling spindle holder SK 50 Speed 2500rpm Since we offer several machines from this series, the advertised images are exclusively sample images of comparable machines. Feel free to provide us with your individual (control, table size, tilt & tilt Setup, etc.) Inquiry so that we can offer you a machine that meets your requirements. MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Oaith Performances: - Used machines - Spare parts - Customer service - Machine service -  ...

Didar Part Number 2600134944 NSN 12-163-2290 Original Part Number 5900980220 In-Pipe Water Pressure 3.5 – 7 bar Out of Pipe Air Pressure 2.6 – 4 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 220 °C Amount of Water in the Pipe 12 Lt. Amount of Air Outside the Pipe 38 Lt.

BARATTI FRAMED VACUUM PUMP WITH SUCTION FILTER AND SILENCER Fabr. -No.: 216 105 // Type: ATMOS V4-KR Var. 0102 Equipment / Additional information: Roots Blower Section. oil and wear-free compression, air-cooled, V-belt drive with tension rails and belt guard and two-stage exhaust silencer Incl. the following accessories: -Vacuum relief valve -saugs. Fine filter 3" -Connection piece internal thread 3" - Rohrfederman. -1..0 bar, filled with glycerine -Drive motor Blower data: Max. negative pressure: 500 mbar, abs. Suction volume: 440 m3/h Fan speed: 2920 rpm Noise level: approx. 79 dB (A) Engine data: 7.5 kW, 2930 rpm, 400/690 V, 50 Hz, IP 55 ISO class F, B3, KKL

Make LB. Model K820-4KZ Year 1994/1995 Size Min: 150 x 210 mm / Max: 820 x 1200 mm Feeder MBO F820 Flatpile feeder - with MBO Vaculift sheet seperation head and MBO Vacubelt suction belt Folding configuration 4 platebuckles + 2 knives with exit to left or right + MBO Z knife for 32 pages Delivery Lega 30/55 pressing upright delivery Details Vacuum pump, noise hoods, batch counter

Catalog No. : 5750 Type: MCFV 1060 Producer: TAJMAC Made in: 2005 Characteristic: Control system: Fanuc Series 18i-MB5 Length of the working table: 1270 mm Width of the working table: 590 mm Maximum table load (evenly distributed): 1350 kg Maximum rotary speed of the spindle: 12000 1/min X-Axis travels: 1016 mm Y-Axis travels: 610 mm Z-Axis travels: 760 mm Equipment: Rotary table Internal cooling 4th axis Workpiece probe MP12 2022: New spindle Chip conveyor High pressure pump Ball bar 2021: X and Y axis laser compensation 2022: GO spindle - new ball screw on X and Y axis - replacement of the rod for holding tools - new bearings - geometry

Universal Vertical Milling Head This milling head was used on a Union TC130 table boring machine and can be adapted to many other machines. About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization

NC Rotary Table Manufacturer: Eimeldingen Table size: 1100 x 840mm Infinitely divisible Condition: As good as new About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization

Tip height: 180 mm Diameter: 240 mm Space requirement: approx. 1550 x 400 x 350 mm Motor: GOULD Permanent Magnet Servomotor Type: M23Y-Y60Y-900N-TH Encoder ROD 426 – 2000 Condition: very good (used) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization

BARATTI FRAMED VACUUM PUMP WITH SUCTION FILTER AND SILENCER Fabr. -No.: 217 325 // Type: ATMOS V4-KR Var. 0102 Equipment / Additional information: Roots Blower Section. oil and wear-free compression, air-cooled, V-belt drive with tension rails and belt guard and two-stage exhaust silencer Incl. the following accessories: -Vacuum relief valve -saugs. Fine filter 3" -Connection piece internal thread 3" - Rohrfederman. -1..0 bar, filled with glycerine -Drive motor Blower data: Max. negative pressure: 400 mbar, abs. Suction volume: 440 m3/h Fan speed: 2920 rpm Noise level: approx. 79 dB (A) Engine data: 7.5 kW, 2930 rpm, 400/690 V, 50 Hz, IP 55 ISO class F, B3, KKL

BORA ROOTS VACUUM PUMP WITH FRAME AND FILTER UNIT / SILENCER Ser. No.: 552.03 // Type: 293 E Equipment / Additional information: 440 m3/h // -400 mbar RPM: 1722 // kW: 7

BORA ROOTS VACUUM PUMP WITH FRAME AND FILTER UNIT / SILENCER Ser. No.: 252.00 // Type: 293 C Equipment / Additional information: 440 m3/h // -400 mbar RPM: 1722 // kW: 7

BORA ROOTS VACUUM PUMP WITH FRAME AND FILTER UNIT / SILENCER Ser. No.: 1900.08 // Type: 353 G Equipment / Additional information: 570 m3/h // -400 mbar RPM: 1722 // kW: 9

BORA ROOTS VACUUM PUMP WITH FRAME AND FILTER UNIT / SILENCER Ser. No.: 2048.09 // Type: 353 C Equipment / Additional information: 800 m3/h // -500 mbar RPM: 2300 // kW: 14.5

4 Buckles FIRST UNIT 4 Buckles SECOND UNIT Flat pile feeder Digital counter Digital program Air compressor Belt delivery

Stroke: 80 mm SUNNEN - MBB 1690 G Power honing machine Ø 1,5 – 140 x 400 mm MACH - ID 6298 Make: SUNNEN Type: MBB 1690 G YOP: 1988 Min. Honing    1,5 mm Max. Honing   140 mm Min. Hon length     3 mm Max. Hon length    400 mm Spindle speeds        2500 Rpm Stroke       80 mm Power       0,4 kW Dimensions Length        1.100 mm Width          1.650 mm Height         1.600 mm Weight        400 kg

Folding machine MBO T49/4, machine number 83067246, 4 pockets + delivery, flat stack feeder, counter, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

- Pallet feeder T 1020 FP 112 - 1. Station T1020-1-1020/6 buckles - 2. Station T800-M-2-88/6 buckles - Z2 mobile cross fold station - DESTA FSA 1000 delivery (1996)

Pallet feeder FP 120 Navigator control 6 folding pockets in the parallel fold section 2 folding knives in the cross fold section 1 additional folding pocket after the 1st cross fold Window cassette Crossfold section can be lifted up for servicing rollers Pocket rollers can be pulled aside for servicing Noise absorbing hood Rollers in good condition Without delivery Included: MBO FW II-560/4 Second unit (variable) width 56 cm Station: 4 folding pockets 56 cm following knife shaft noise absorbing hood

Capacity: 2800 Watt volume: 100 L filter: HEPA : 230 mbar material: INOX Edelstahl Behälter : 5000 mm hose diam.: 32 mm : 5000 mm noise: 82 dB dimensions: LxBxH 50 x 50 x 135 cm weight: 35 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: ELMO RIETSCHLE / Garden Denver Type: G200 2BH1900 Overall size: 500 x 600 x 1100 mm Connecting pipe stub: DN100 Pmin: 280 mbar RPM: 2920/min Electrical data: 50 Hz; 380 V; 12,5 kW; 28 A

Manufacturer: ELMO RIETSCHLE / Garden Denver Type: G200 2BH1900 Overall size: 500 x 600 x 1100 mm Connecting pipe stub: DN100 Pmin: 280 mbar RPM: 2920/min Electrical data: 50 Hz; 380 V; 12,5 kW; 28 A

rinser MBF – 40 clamps • Year: 1998. • Speed: 8.000 bph. • Direction: Clockwise. • 40 clamps. • Single treatment. • Mobile nozzle. • Safety protections.

MBARBECOL turbine flap PN-5478 MAN 28/32 engine Just the turbine hull.

Folding machine MBO K67 / 4 KZ FD Format 67x104 cm Year of production 1982 Very good condition To watch - out of production - possibility of connection price: on request

Vacuum Suction Blast Machine Fabr. INNOVATION Type ZEA 01Ser. -No: 581-08-ZEA01 built in 2008Blasting medium filling volume KB 7 300 lCompressed air supply: 6.0 barperm. max. Negative pressure: 550 mbarExternal dimensions of the blasting hood: 905 x 204 x 605 mmWeight of the blasting hood: 30 kg:External dimensions of the media tower for the zinc removal: 1300 x 1300 x 3650 mmWeight of the media tower: 650 kgwithout industrial vacuum cleanerusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mobile deduster Fabr. ESTA Fabr. DUSTOMAT 41Fabr. -No: 09113 Year 1995Rated power: 1490 m³ / h.Minimum power: 1108 m³ / hAir pressure: 27.8 mbarHose connection diameter: 140 mmSpeed: 2870 rpm.Drive power: 3.0 kWused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic sheet metal shears make VOEST-ALPINE type BTHS 8 x 3150Fabr. -No: MBO-565Technical specifications:max.cutting length: 3150 mmmax.sheet thickness: 8.0 mmThroat: 300 mmInfinitely variable cutting length adjustment: 500 - 3150 mmStop adjustment range: 0 - 1000 mmWeight about 10.2 tDimensions approx: 3500 x 2300 x 1900 mmwith- motorized backgaugeused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

1 MÜLLER air jet label loom MÜJET 2S type MBJL 2S 115, specification SPE5 1536/1152 T, year 10-2001, commissioned in 2002, tafeta machine, 8 colours, 740 rpm, MÜDATA 300, machine delivered with 3 weft feeders, 1 warp beam, 1 cloth roller, 20 thermal cutters

(Serial No. M12/42), Flatpile Feeder, Overhead Control Panel, 4 Pockets, 1 Cross Fold Knife, Delivery

SHW UF 5 Travel • X-axis (rotary table): 1,500 mm • Y-axis (headstock vertical): 1,300 mm • Z-axis (headstock horizontal): 750 mm Control • CNC control: Siemens 3 M Conversion to Heidenhain TNC 415 possible Automatic swivel head (Switching between horizontal and vertical machining) Pinole 120mm Milling spindle holder SK 50 Speed 2500rpm Year of construction 1994 • Refurbished in 2016 Stepless NC rotary table • Backle PKTF 55 • Clamping surface: 1500 x 1250 mm About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine ov ...

Frequency: 50/60 Hz Speed: 1420/117 m3/h Power requered: 2,4/3,0 kW Inlet capacity: 100/117m3/h Max.vacuum: 3/3 mbar

pallet feeder Navigator control 1. folding unit 78/6 VN, 6 bags Front- and rear-mounted slitter shafts gatefold pocket for 1. or 2. unit gluing unit HHS 2. folding unit 78/6 VN, 6 bags Front- and rear-mounted slitter shafts 3. folding unit 56/4 RFE, 4 bags noise reduction unit upright sheet delivery SBAP 72 ME compressor

Year: ca. 2001 Serial No. R11/47, Roundpile Feeder with Overhead Digital Panet, HSS Gluing System, 1st Station: 4 Pockets, 2nd Station: 4 Pockets, 3rd Station: 2 Pockets, MBO X Mobile Knife for 32 Pages, Pressing Delivery

mobile, 180° rotatable cross-fold unit with navigator control

Used double chamber vacuum packaging machine Multivac AG800 has two chambers which ensure greater efficiency and is used in every industry where vacuum packaging of products is required. The machine is equipped with a high-performance Busch vacuum pump with a capacity of 100m3 / h and four sealing bars with a length of 650mm. The internal dimensions of the packing chamber are: 650 mm x 800 mm x 220 mm high. Busch vacuum pump: 100m3. Final pressure: 0.5 mbar Vacuum system: according to the sensor External dimensions of the machine: 1560 mm x 1100 mm x 1150 mm. Dimensions of sealing bar: 650 mm x 4. Weight: 275 kg.

Gardner Denver V-VC 75 Vacuum Pump Oil-flooded rotary vane vacuum pumps with IE2 motors Easy maintenance. Final partial pressure 0.1 mbar Suitable for industrial applications Flange motor, double-sided rotor bearing, oil/air cooler. Fine screen filter, suction check valve, gas ballast valve, protective cover and oil separator mobile use equipped with Siemens Simatic Display Specifications: Elmo Rietschle Gardner Denver Product Oil-lubricated rotary vane vacuum pump V-Series V-VC 75 Operating hours approx. 6684 Power 2.2 kW 1,745 rpm Pump capacity 70/84 m³/h Pressure 0.5 mbar Item condition: used

Gardner Denver V-VC 75 Vacuum Pump Oil-flooded rotary vane vacuum pumps with IE2 motors Easy maintenance. Final partial pressure 0.1 mbar Suitable for industrial applications Flange motor, double-sided rotor bearing, oil/air cooler. Fine screen filter, suction check valve, gas ballast valve, protective cover and oil separator mobile use equipped with Siemens Simatic Display Specifications: Elmo Rietschle Gardner Denver Product Oil-lubricated rotary vane vacuum pump V-Series V-VC 75 Operating hours approx. 883 Power 2.2 kW 1,745 rpm Pump capacity 70/84 m³/h Pressure 0.5 mbar Item condition: used

Scrap shear dentition attachment for an excavator used MBI ZHEJIANG MANTOVANI MANTOVANIBENNE Type MS22-MC Year: 2020 suitable for multipunch MS22R Overall dimensions: 1100 x 1100 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved

travel -x axis: 140 mm travel -z axis: 710 mm control: Siemens C 200-4 main spindle speeds: 5.000 U/min bore diameter: 65 mm numbers of positions in the tool changer: 24 (2x12) CNC Turning- and Milling Center | INDEX - G300 + 2 turret + tailstock + bar feeder: Index MBL 65 Scope of delivery: - tool holder fixed The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: G 300 | G-300 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Scrap shear dentition attachment for an excavator unused MBI ZHEJIANG MANTOVANI MANTOVANIBENNE Type MS15-MC Year: 2020 Overall dimensions: 1100 x 1000 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved

Nilfisk T30S, item number 4030600083 3.0 KW, 400 V, 50 Hz, 2840 rpm, 3 phases, 6.6 A, cos phi 0.90, Iso F, S1, IP55 Weight 103 kg, container volume 100 liters Vacuum -220 mbar, 130 m³/h Overpressure 278 mbar, 120 m³/h Year of construction 2011

Tank scissor dentition, scrap scissor bit attachment for an excavator used MBI ZHEJIANG MANTOVANI MANTOVANIBENNE for MS22 Overall dimensions: 1400 x 1300 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved

Pile feeder F535 – Vacustar separating head 4 buckles 1 knife Batch counter A56 delivery

CATERPILLAR/ MWM type TCG 2020 V12 -> 0.999 MWe. The engine and generator are fully operational. Engine mileage - approximately 33000h. Year of manufacture 2015; fuel: natural gas / biogas Generator: Manufacturer MARELLI MOTORI SP. A type MJB 500 MB4; CODE MJB5042K33380; No. MC 16586; year of manufacture 2015. Control cabinet complete with panel. Engine taken out of service with the customer in August 2022 due to the purchase of a new one. The engine has no visible signs of leakage. If interested, I can send a real -film on WhatsAp.