mtu mb used for sale

The gas flare was intended for a research project that could not be carried out. It is brand new and in its original packaging. The torch is supplied as a complete "package unit" with an on-site control cabinet made of CrNi steel. The torch can be installed both indoors and outdoors, but the torch should be visible to the operator of the control cabinet. 1.1 Pilot burner / biogas support burner with fittings The equipment of the pilot biogas burner unit consists of the following components: - Shut-off ball valve DN25, approved for biogas - Biogas filter DN25 - Pressure regulator DN25 - Pressure gauge with "push-button shutdown", 0-100 mbar, approved for biogas - Gas solenoid valve DN 25, make: Kromschröder, type VAS 125R/LW - Flame arrester DN25, make: Protego, FA-G1" IIA1-P2,2 - Biogas burner nozzle (4 pcs.) 1.2 Process gas burners with fittings The equipment of the p ...

Pneumatic conveying installation for different kinds of powders, consisting of: Feeding hopper with cover and turbine vibrator (Netter NCT 10), injector (Telschig 2'' FOX 300-SCE-SS) and side channel blower (Elektror Sd 820, 7,5 kW, 9,0 m³/h, 420 mbar) with pressure limiting valve. Conveying capacity: 375 kg/h, required air flow: Ca. 180 Nm³/h at 330 mbar.

Busch rotary vane vacuum pump RA 0100 E with 2.2 KW AC-motor, 100 m3/h, final pressure: - 0.5 mbar, completely overhauled with all wearing parts, 1 year warranty

Technical data Ruwac WS 2220 m Suction: 2,400 Watts Air capacity: 290 m3/h Voltage: 230 Volt Vacuum: 210 mbar Filter surface bag filter: 1.2 or 2.6 m2 Tank capacity: 35 litres Residual dust filters: 3.2 m2 Sound pressure level: 67 dB(A) Inlet: 50 mm

Busch rotary vane vacuum RA 0250 D with 5.5 KW DS motor, 250 m3/h, Final pressure: - 0.5 mbar, completely overhauled with all wearing parts, 1 year warranty

Claw vacuum pump Compressing dry Manufacturer: Busch Type: Mink MM 1502 AV Engine: DS 400V Suction capacity: 500 m ³/h Discharge pressure: approx. 200 mbar (abs.) Accessories: inlet filter; Operating instructions Delivery time: Please enquire; ready for operation

Busch rotary vane vacuum pump RA 0400 B with 11.0 KW DS motor, 400 m3/h, Final pressure: - 0.5 mbar, completely overhauled with all wearing parts, 1 year warranty

CHP Power Plant 800 kWe with 2xMWM TCG 2016V08 Gas Gensets Good condition and low operating hour 800 kWe / 400 V / 50 Hz combined heat and power (CHP) plant running on natural gas or biogas. The plant was delivered by MWM in 2011 and it operation was closed in 2021. Thermal energy is in form of hot water at 90°C and currently used for district heating purpose. Due to the low amount of biogas, cogeneration plant worked at low capacity (30-40%), and not around the clock. It has a complete gas treatment and mixing system to utilize biogas from landfilling which has 40 – 55 % of CH4. Power generators are installed in two soundproof containers, TEAM Evo WMW power plant control system and all electric switches and control cabinets are installed in separate control room. Heat recovery system is built next to genset containers. Both units have separate cooling radiators for engine cooling ...

Spot welding equipment, Power: 70kVA at 50%, with electronic control SERRATRON 1B that allows: 127 welding programs Integrated programming unit Full Ethernet+TCP/IP connectivity at 10/100 Mbps Wide range of welding functions: ON/OFF, SEQUENCE... Proportional valve control Sequence with 3 welding times Electrode wear compensation

Rotary vane vacuum pump manufacturer: Busch Type: R5 RA 305 D Voltage: 50/60 Hz 400V Nominal: 300m ³/h Discharge pressure: 0,5hpa(mbar) Status: Rebuilt Gewaehrleistung-12 months Includes: motor new storage, painting, electrical check Delivery time: In stock; ready for operation

MBO K800 S-KTL/6 Pallet Feeder MBO FP 800 Combined folder with 6 pockets + 2 knives + newspaper fold pocket MBO Navigator with automatic roll and pocket adjustments Wallet fold pockets KTL MBO ASP 66.2 ME delivery with pressure roller system Year of manufacture 2002

TECHNICAL PARAMETERS: 1. Max sheet width: 760 mm 2. Max sheet length: 1200 mm 3. Min sheet width: 150 mm 4. Max sheet length: 200 mm 5. Weight: 40-300 g Year of production: 2003 net price

insertion width 80 CM pallet feeder folding group with 4 motorized pockets motorized folding rollers motorized KTZ cross fold collage for 8 and 12 pages before the rolls, 1 head sequential perforation before the folding rollers with 2 heads fold pocket Palamides Alpha 700 Plus output

MBO K55-4KTL + window buckle plate In great working condition. - 2 Knives - 4 buckle plates + window buckle plate - gluing system (not complete) - Vaculift, Vacubelt, Vacutable

Claw vacuum pump Dry Manufacturer: Busch Type: Mink MM 1322 AV Engine: DS 400V Suction power: 300 m ³/h Discharge pressure: approx. 150 mbar (abs.) Warranty: 12 months Condition: Near Mint Accessories: inlet filter; Operating instructions Delivery time: in the short term; ready for operation

Leybold vacuum pump SV 100 B with 2.2 KW AC-motor, - 0.5 mbar (without gas ballast), completely overhauled with all wearing parts, 1 year warranty

MBO SF56 Log stitching machine with glue tread. Price and more information on request

Claw vacuum pump Compressing dry Manufacturer: Busch Type: Mink MM 1402 AV Engine: DS 400V Suction power: 400 m ³/h Discharge pressure: approx. 200 mbar (abs.) Accessories: inlet filter; Operating instructions Delivery time: Please enquire; ready for operation

Leybold SV 300 with 5.5 KW AC-motor, 300 m3/h, max. vacuum: x 0.08 mbar (without gas ballast), completely overhauled with all wearing parts, 1 year warranty

Mixing tank 80 liters REITZ MB80 for bulk materials Used open mixing tank approx. 80 liters with geared motor 0.75 KW and inclined blade stirrer 700 mm Application: Mixing of powdered materials. Slow-running, high-torque agitator for powdered mixes. High torque with low energy consumption. Stirred tank: Mobile mixing tank made of stainless steel with bottom slide for draining the mix. All boilers are refurbished and clean. Capacity approx. 80 litres Geared motor: Geared motor Lenze 0.75 KW, 230 / 400 V, 3 phases, 50 Hz, 1410 rpm, IP 55, ratio i = 56, 25 revolutions per minute at shaft output. With motor protection plug to protect the geared motor. Shaft: stainless steel shaft diameter 20 mm, length 500 mm, material 1.4571 Agitator: Double-bladed inclined blade stirrer, diameter 700 mm, material stainless steel 1.4571

Rotary vane vacuum pumps lubricated Manufacturer: Becker Type: U5. 100 Suction power: 100 m ³/h Discharge pressure: 0.1 mbar (abs.) Including: Gasbalast, oil filter Status: Demo Warranty: 12 months Delivery time: In stock; ready for operation

Oerlikon Leybold SV 300 B with 5.5 KW AC-motor, 300 m3/h, Final pressure: < - 0.08 mbar (without gas ballast), completely overhauled with all wearing parts, 1 year warranty

Key data: 700 °C, 2400 mm, 6500 mm

1 piece gas-fired chamber furnace with air circulation and bogie hearth Type: KLWg 220/180/650 for unsupervised operation for three-phase three-phase current 400 volts/N, 50 Hz. for temperatures up to max. 700°C for natural gas "H" External oven dimensions approx. Width in mm: 3400 Width with control cabinet in mm: 3800 Height in mm: 3200 Length with inserted. Bogie hearth in mm: 8000 Length with fed. Bogie hearth in mm: 15500 clear interior dimensions approx. Width in mm: 2400 Height over beams in mm: 1800 Length in mm: 6500 Volume in m³: 25,7 Batch dimensions max. Width in mm: 2000 Height in mm: 1500 Length in mm: 6100 Weight max. in kg: 20000 Connected loads approx. Number of rule groups: 4 Number of burners: 8 Total burner power in kW: 720 Burner air blower in kW: 5.5 Circulating motor in kW: 22 Number of circulating motors: 4 Bogie hearth d ...

Rotary vane vacuum pump manufacturer: Becker Type: U4. 630 SA/K o F/K Vacuum: 3 mbar - 0.5 mbar Motor: 15KW status: used, tested! The General overhaul for the device will be sold separately! Including: oil, vacuum suction filter Delivery time: In stock!; ready for operation

Gardner Denver/Rietschle Claw vacuum pump VLR 300 complete with 5.5 KW AC-motor, 300 m3/h, max. vacuum: - 50 mbar, continuous operation: - 150 mbar, overhauled with all wearing parts, 1 year warranty

Offered here is a vacuum evaporator for wastewater from Korrotherm, model K750. Suitable for chloride-containing and aggressive wastewater Completely technically overhauled and not put into operation since then - like new The Korrodest evaporator system provides a fully automatic low-temperature evaporator system, which is largely autonomous, i.e. without permanent monitoring. by operating personnel. The plant is designed for the processing of diluted, even chloride- and sulphur-containing rinsing water from surface technology. The incurred Rinsing water is thermal, in a vacuum of about 50 mBar, corresponding to about +35°C evaporated and separated into two components. On the one hand, in the distillate, which can be produced up to 98% of the volume flow rate, and on the other hand into the concentrate, which can be concentrated to a density of approximately 1.3 – 1.35  ...

Rotary vane vacuum pump packing Manufacturer: Busch Type: CB0251B Vacuum: 0.5 mbar Status: used, tested! The maintenance for the unit is sold separately! Including: oil filling Delivery time: In stock!; ready for operation

Gardner Denver/Rietschle Claw vacuum pump VLR 500 with 9.0 KW AC-motor, 500 m3/h, final pressure: - 750 mbar, completely overhauled with all wearing parts, 1 year warranty

Good working conditions

Good working conditions

Rotary vane vacuum pump packing Manufacturer: Busch Type: 220-80 Vacuum: 0.5 mbar Status: used, tested! The maintenance for the unit is sold separately! Including: oil filling Delivery time: In stock!; ready for operation

Becker rotary vane vacuum pump VTLF 2.250/0-79 with 5.5 KW DS motor, 250 m3/h, final pressure: - 800 mbar, completely overhauled with all wearing parts, 1 year warranty

Good working conditions

Rotary vane vacuum pump manufacturer: Busch Type: R5 RA 302 D Voltage: 50/60 Hz 400V Nominal: 300m ³/h Discharge pressure: small 0,5hpa(mbar) Status: Rebuilt Gewaehrleistung-12 months Includes: motor new storage, painting, electrical check Delivery time: In stock; ready for operation

Oerlikon/Leybold roots vacuum pump WA/WAU 501 with 2.2 KW AC-motor, 500 m3/h, max. vacuum: - 80 mbar, completely overhauled with all wearing parts, 1 year warranty

Description: Avional MBM head with TERSA knives: - diameter 160mm - length 100mm - bore 40mm - Z=8 Approx. Onsite Dimension. (l x w x h): 200 x 200 x 150 mm, weight approx.: 9 kg

Description: Steel MBM head with TERSA knives: - diameter 100mm - length 140mm - bore 30mm - Z=4 Approx. Onsite Dimension. (l x w x h): 100 x 100 x 150 mm, weight approx.: 6 kg

Rotary vane vacuum pump Oelumlaufgeschmiert Manufacturer: Pfeiffer Type: BA251 Status: Rebuilt Warranty: 12 months Accessories: owner's manual Resources: Mineral oil or by appointment Suction power: 250 m ³/h Enddruckmit GASB.: approx. < 5x10e-1 hPa (mbar) Delivery time: approx. 1-3 weeks u.ue.V. Delivery: Ex works; ready for operation

With pallet

Description Three-phase suction unit Voltage: 400V Power: 5.5 kW Vacuum: 44 kPa (440 mbar)

Max. printing width: 1610mm, max. roll weight: 45kg, length: 2775mm, width: 700mm, height: 1392mm, weight: 166kg, with ink supplier Bulk System MBIS3, for the use of paint bags up to two liters, was hardly used.

Scroll-vacuum pump Status: required, verified, functional Manufacturer: Edwards Type: GVSP 30 Engine: 400V Resources: Mineral oil Nominal: 30 m ³/h Discharge pressure: < 0.01 mbar (ABS.) Includes: user manual Oil (mineral oil) delivery: ex works; ready for operation

Oerlikon/Leybold roots vacuum pump WAU 1001 complete with 4.0 KW AC-motor, 1000 m3/h, max. vacuum: - 80 mbar, completely overhauled with all wearing parts, 1 year warranty

Block vane vacuum pump status: used, tested, working Manufacturer: Kinney Type: KT-300 D Engine: 400V Resources: Mineral oil Nominal: 25 m ³/h Discharge pressure: < 0.008 mbar (ABS.) Includes: user manual Oil (mineral oil) delivery: ex works; ready for operation

Pallet feeder 1st station 8 folding bags Window fold pocket Side pocket 2 Swords Shed delivery ASP 66 Noise protection hood

On behalf of the customer: Used combined heat and power plant Manufacturer Energy Workshop Type ASV 21/46 Year of construction: 2011 Ma. Number 3215484 Gas type: Natural gas Heat load range up to 70 kW Nominal connection pressure 20 mbar Electrical power range 5 – 21 kW Thermal power range 19 – 46 kW Max. operating time temperature 70 / 90 °C Max. permissible Return temperature 4 – 70 °C Max. permissible Operating pressure heater 6 bar Max. permissible Operating pressure engine 2 bar Max. permissible Operating pressure exhaust gas (engine) 180 mbar Generator voltage 400 V Frequency 50 Hz Rated current 40 A Speed 1,535 rpm. Weight approx. 700 kg Dimensions approx. 1.20 m x 0.80 m Height approx. 1.24 m Up to control cabinet 1.47 m Transport height (with pallet) approx. 2 m Device worked without any problems until the removal at the end of 2023 ...

MBP 14 head multihead weigher, model: SM14 02, serial number: 0606, year of constructions: 2007, dimensions: 1400 mm x 1400 mm x 1700 mm.

Rotary vane vacuum pump Oelumlaufgeschmiert warranty: 12 months Manufacturer: Becker type: U 4,250 SA/K Engine: DS 400V Suction power: 250 m ³/h Discharge pressure: 3 mbar (ABS.) Status: very good condition. Reconditioned Accessories: oil (petroleum) Delivery time: Please enquire Further details or technical assistance like via request; ready for operation

Rotary vane vacuum pumps lubricated 2-stage Status: Rebuilt warranty: 12 months Manufacturer: Leybold Type: Trivac D16B Suction capacity: ca. 16 m³/h Discharge pressure: approx. 5x10e-3 mbar Engine: 400V DS Resources: Mineral oil Accessories: owner's manual Oil mist separator optional Delivery time: By appointment (subject to prior sale) Spare parts, equipment or alternative pump on request.; ready for operation