mtu mb used for sale

Rotary vane vacuum pumps single stage Oelumlaufgeschmiert Status: required, verified, functional Manufacturer: Rietschle Type: CLFH 141 (01) Engine: 400V Resources: Mineral oil Nominal: 140 m ³/h Discharge pressure: < 0.5 mbar (ABS.) Includes: user manual Oil (mineral oil) delivery: ex works

Bush two stage pumps stand: data pump status: type: BNV 1000 A Vacuum: mbar (abs.) 0.005 Data backing pump: Type: NC0400B suction volume: 400 m³/h Discharge pressure: 0, 05mbar (ABS) Data booster: Type: WV1000B Suction power: 1000 m ³/h Discharge pressure: 0, 005mbar (ABS) Condition: tested, serviced (good condition) Includes: vacuum pre-filter, oil filling Warranty: 3 months; ready for operation

Rotary vane vacuum pump Status: Generalueberholt; Asgood Performance: 12 months Lierfertime: from stock Manufacturer: Busch Type: R5 RA 165D Engine: 400V equipment: Mineraloel o. Syntetisches Oel Nominal suction systems: 160m3/h end pressure: 0.5 mbar (abs .) Oil filling (mineral oil); Vacuum suction filters delivery time: from stock (intermediate sale reserved) If you have any questions about vacuum technology, we are happy to provide you with information; ready for use

Rotary vane vacuum pump Status: Generalueberholt; As capacity: 12 months Yield time: from stock Manufacturer: Busch Type: R5 RA 255D Engine: 400V Equipment: Mineraloile Nominal suction digesters: 250m3/h Final pressure: 0.5 mbar (abs.) Zubehoer: User Manual; Oil filling (mineral oil); Vacuum suction filters delivery time: from stock (intermediate sale reserved) If you have any questions about vacuum technology, we are happy to provide you.

Centrifugal compressor in landfill gas use. Technical data sheet located as an attachment. The compressor is located in a very good condition, is until end of July 2018 in the operation and is very robust (casing). Pressure difference 180mbar and 15 kW drive motor. Radial blower used for landfill gas utilization. Technical specification see attached data sheet. The blower is in good technical condition and still in operation on a bio-gas plant in Germany untill end of July 2018. Pressure drop 180 mbar with 15kW electrical drive.

all stainless steel belt width 640 mm natural gas 16 kW 414 kW heat capacity 3 x 400 V gas pressure 30 mbar

New gas pressure regulator, Itron, DN80, RR16-80-82-12N-SL-IZN.1 Manufacturer: Itron Type: RR16-80-82-12N-SL-IZN.1 - DN80, PN16 - W DSO 35 mbar - 250 mbar Condition: The gas pressure regulator was purchased from a spare parts warehouse of a company and is still in its original packaging Dimensions: 43cm x 40cm x90cm high Weight: 63 kg

Stock number: UG6261 Used stainless steel vacuum pump by NSB Gas Processing AG (Switzerland) type PMZF 2507 D3 X3 in Ex design (EEx e II T3/ATEX). Pump is driven by el motor 6.8 kW, 1500 rpm, 400 V, 50 hz. Working output up to 150 m3/h and suction pressure up to 1000 mbar. Pump new 2011.

Measuring instrument for flow rate measurement via differential pressure Manufacturer Endress + Hauser EH Type Deltabar S MWP 160bar Delta P -100 ... 100 mbar 4 ... 20 mA HART Bconx8hxqp Multiple existing

with Pocket folding additional aggregate, Delivery

- very well used and refurbished rotary vane vacuum pump - oil-sealed two-stage fine vacuum pump - Suction speed: approx. 18 m3/h, final pressure: 5x10E-3 mbar

Folding machine 360 Touch screen Electronic variable speed drive Flat pile feeder, with head suction Compressor Rotary Suction Double Sheet System Antisound covers Stream delivery Machine specially designed for the folding of brochures, allows a minimum fold of 20 mm Spiral rollers (to avoid wrinkles) similar to MBO Module to launch the narrow folds to the 2nd unit (if machine has 2nd unit) Vertical delivery stacker for optional microfolding Technical specifications Max. Format: 360 X 850 mm Min. Format: 85 X 100 mm Min. Folding: 20 mm Max. Speed: 180 m/min Paper thickness: 40-250 grms Weight: 1500 kg Can be configured from 4 to 12 buckles in a single unit (Also available model 470)

MABS1500 Extraction system metal for metal shavings easy filter change large collection container with drawer stable housing Engine: 1500W, 230V or 400V Suction capacity 1500 m3/h Fan wheel diameter: 300mm Suction connection: 100mm Weight 73kg

Dough kneading machine Model: MBT SP 6 Protective grille with shutdown Table machine Spiral kneader for max. 6 kg. dough Speed infinitely adjustable DGUV V3 tested Connection 220V Dough machine NEW Come to our Milbrandt Outlet with show backroom and many appliances!

Dough kneading machine Model: MBT SP 6 Protective grille with shutdown Table machine Spiral kneader for max. 6 kg. dough Speed infinitely adjustable DGUV V3 tested Connection 220V, 400 watts Dough machine NEW with 12 months warranty Come to our Milbrandt Outlet with Schbackstube and many devices!

Model: KR16-06 Year: 2008 Operating Pressure: 150 mbar Design Pressure: 500 mbar Scope of supply: this is fitted to all landfill gas engines as a prefilter before the gas goes into the engine. It removes water and particulate. Kelburn KR16-06 Coalescer Filter Vessel comprising of one off 400mm diameter demister/filter vessel, polyester / borosilicate microglass coalescing filter cartridge, RF flanged inlet, RF flanged outlet, ¾” BSPT (F) tapped drain connection, ¾” BSPT (F) tapped and plugged vent connection. Coalescer Filter Vessel complete with automatic liquid float drainer, differential pressure gauge complete with stainless steel isolating valves, fittings and pipework, sight level gauges, flanged access cover and davit arm and flanged and blanked inspection cover, 1 Complete set of interconnecting pipe work from filter vessels and automatic liquid float draine ...

Dough kneading machine Model: MBT SP 10 Protective grille with shutdown Table machine Spiral kneader for max. 10 kg. dough Speed infinitely adjustable DGUV V3 tested Connection 220V, 400 watts Dough machine NEW with 12 months warranty Come to our Milbrandt Outlet with show backroom and many appliances!

Manufacturer: GARDNER DENVER #3289 Type: G200 2 BH 1900 -7AH17 Electric power: 12.5 kW RPM: 2920/minute at 50Hz Pmin: 280 mbar

Dough kneading machine Model: MBT SP 6 Protective grille with shutdown Table machine Spiral kneader for max. 6 kg. dough Speed infinitely adjustable DGUV V3 tested Connection 220V Dough machine NEW with 12 months warranty

Pallet feeder – separating head Vaculift - Vacubelt 6 buckles Gate fold Compressor Without delivery

Series No. 50871101, Flatepile Feeder, 4 Pockets, Delivery

- Three mobile knives units for additional knife fold - Can be used on combi or buckle folders for various configurations ( Mbo, Stahl, etc. )

Stikkenofen Miwe Rollin RI-2/1 60/80 Jumbo 3 pieces - Miwe Rollin Jumbo baking cabinet for 2 stikken wägen - with exhaust air hood - with gas burner -with Miwe Mucs control -Built in 1998 -3-N PE AC 400 V 50 Hz -Fuel gas -Connection pressure 15 - 100 mbar Rated heat load. 175 kW

Exhaust system, industrial vacuum cleaner, dust extraction with filter and fan used Manufacturer: P. RIES GmbH Type: 280 D Volume flow: 2500 m3/h Vacuum: 28 mbar Waste drawer: 70 litres Cartridge filter: approx. 13 m2 with filter flushing, filter cleaning with fan 2.2 kW 380 V Dimensions total: approx. 550 x 600 x 1850 mm The filter was planned for a dental laboratory. All items are checked for function before delivery, if technically possible ! Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Description Rotary vane vacuum pump Becker KVT 3.140 from year of construction 2011, completely revised June-2014, since then stored – robust and completely oil-free vacuum pump – with simple construction, direct drive and only one shaft – guarantees longevity and low maintenance and operating costs – integrated intake filters and regulating valves – problem-free installation of accessories – optional corrosion protection – low noise emission – low heat radiation Technical data – Frequency: 50/60 Hz – maximum pumping speed: 129/154 m³/h – max. vacuum: 100/200 mbar abs. – motor power: 3.3 /4.40 kW

Description suction quantity 132 [m3/h] max suction pressure ± 100 [mbar rel.] Motor 3.3 KW

Description Rotary vane pressure vacuum pump Rietschle KTA 80 .1 YOC 2006 max. delivery quantity 80 [m3/h] max. pressure ±600 [mbar rel.]

Pyrolyx Pyrolysator Thermal Double Screw Reactor Model 1-FD07 Reactor for the depolymerization and pyrolysis of rubber granules Capacity rubber granules (typical): 1100 kg/h media Compressed air: max. 7 bar Instrument air: max. 7 bar CO2 low pressure: max. 1.3 bar CO2 medium pressure: max. 3.5 bar specifications Dimensions of the system: 14600 x 1540 x 1500 mm Screw diameter: 790 mm Weight: about 20 tons. (metric) Product Contact parts: 1.0473 Pressure tested at 200 mbar Design -100/+200 In operation -80 Temperature maximum: Up to 550°C Operating temperature: 350°C-550°C Power requirement Start-up: 180 kW Energy demand Operation: 140 kW Seal: Gland seal(r) with graphite seal Max sound pressure level: 80 dBA Bearing flushing: with CO2 at 300 mbar engine: Voltage: 400V, AC Frequency: 50 Hz Power: 2.2 kW Protection class: IP54 Frequency transmiss ...

Volume : 618 ltr. Material : areas in contact with the product in stainless steel Working pressure : 3 bar Working pressure jacket : 3.5 bar temperature: 145°C Temperautr jacket : 148 ° C Vacuum drum : 50 mbar;

Reference Num.: 3527 Brand: MBO Type: T 500 Construction year: 1995 Available: directly Status: In production Location: Deutschland Equipment: - Format 50 x 70 cm

Vacuum pump,Busch type RC0063,1,5 kW motor,vacuum 20 mbar.

carrying capacity: 500 kg. number of suction cups: 6 Stück suction cup dia.: 215 mm 0: 8,0 m³/h tool adaptor: Kranöse 80,0 mm voltage: 400 V total power requirement: 0,18 kW weight of the machine ca.: 120 kg. dimensions of the machine ca.: 2400 x 1100 x 584 mm Furnishing : - for the horizontal transport of smooth, dry and airtight panels - Robust support structure made of steel - Painted in RAL 2000 with a low weight - Galvanized longitudinal traverse with a length of 2,400 mm - 3x galvanized crossbars with a length of 1,000 mm - 6x springy, articulated and adjustable suction cup holders - 6x suction cups Ø 215 mm - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump - with a suction capacity of 8 m³ / h and an ultimate vacuum of 85% (150 mbar) - 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) - Operating handle can be extended to 1,000 mm from t ...

Vacuum pump Manufacturer: Busch Type: SV 1040 C 000 10XX Item #: 00445000075 Final pressure: 120 mbar Power: 1.25 kW

Vacuum pump Manufacturer: Busch Type: RC 0025 E 501 Item #: 02006242 Pressure: 20 mbar Power: 0.75 kW LBH: 560 x 310 x 420 mm

Hose head with WDS. Nozzle up to 120 mm. Available from stock

Rotary feeder 1st unit : 4 buckles 2nd unit : 4 buckles 3rd unit : 4 buckles Batch counter MBO ASP 66-2ME press delivery Pumps

Pallet Feeder with MBO Vaculift Feederhead, 1st Station: 4 Pockets, 2nd Station: 4 Pockets, 3rd Station: 2 Pockets, with MBO pressing Delivery SAP46, M-No. 85058495

Mixer MBK Volume: 250L Dimensions: 1400 x 900 x 1300 mm Inside diameter: 800 mm Inner height dres: 500 mm Constructed of stainless steel One run Cover with the so-called plexiglass Stock status: 1 piece Condition: Used Price on request, We have many other kealte plants and meat and fish processing machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

High temperature debinding furnace, make GERO type: HBO 50/13-3 2G heating: electrical useable space: ø400 x 400 mm temperature: max. 1.300°C ventilation: exhaust fan during the cooling phase and activated cooling fan ultimate vacuum: 10 mbar exhaustion time: ca. 5 min nitrogen: inlet pressure min. 3 bar oxygen: inlet pressure min. 3 bar

 Spiral Kneader Boku Kettle ALUHeducator : BokuType : SK 240 ASCS For 160 kg flour , 240 kg doughWe have 5 pieces in stockDetails see picture

MBM Commercial Kitchen Technology Germany Flake ice machine MBM Type: ICE 350 IS Stainless steel cladding Coolant: R404a Year of construction 2003 0,800kg Water supply Water drainage With switch box for switching on and off Height: 190cm Width: 125cm Depth: 90cm

In-store baking oven Wiesheu B8E2Manufacturer : WiesheuType : B8E2 IS600Year of construction : 2005Gärschran Year of manufacture 11/201610 Supports for 60x40cm trayswith steam condenserBaker conditionDetails see picture

used roll splitting machine Manufacturer: BOA (MBM) Type: RSM Year of construction: 1990 specifications: Roll width max.: approx. 1,800 mm Roll diameter max.: approx. 500 mm Drive power: 3 kW Drive via an electric motor with spindle with task table

Didar Part Number 2601582001 NSN 12-SG3-0291 Original Part Number X00018011/87 In-Pipe Water Pressure 3 – 8 bar Out of Pipe Air Pressure 3 – 5 bar In-Pipe Water Temperatur 75 °C Outside Pipe Air Temperature 235 °C Amount of Water in the Pipe 8 Lt. Amount of Air Outside the Pipe 22 Lt.

Didar Part Number 0697210002 NSN 12-334-9607 Original Part Number 0020984020 In-Pipe Water Pressure 4 – 6 bar Out of Pipe Air Pressure 4 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 200 °C Amount of Water in the Pipe 17 Lt. Amount of Air Outside the Pipe 63 Lt.

Didar Part Number 2605710003 NSN 12-A08-6397 Original Part Number 0030983220 In-Pipe Water Pressure 3.5 – 8.5 bar Out of Pipe Air Pressure 3.5 – 4 bar In-Pipe Water Temperature 95 °C Outside Pipe Air Temperature 215 °C Amount of Water in the Pipe 24 Lt. Amount of Air Outside the Pipe 45 Lt.

Rotary vane vacuum pump manufactured by BUSCH. With a Busch VM oil type of 1 liter. The sound pressure level is 63 dB (A) and the maximum tolerance steamed is 40 mbar. With a water vapor capacity of 1.1 kg per hour.

Didar Part Number2600208001 NSN 2930-12-A01-6407 Original Part Number 0030983920 In-Pipe Water Pressure 6.0 – 9 bar Out of Pipe Air Pressure 3.3 – 5 bar In-Pipe Water Temperature 95 °C Outside Pipe Air Temperature 225 °C Amount of Water in the Pipe 4 Lt. Amount of Air Outside the Pipe 14 Lt.

Manufacturer: SHW Type: UFZ 4L Control: Siemens 880 Year of construction: 1994 Tool holder: SK 50 Track X, Y, Z: 8000, 1000, 1600 (vertical) mm Tool changer 120-fold Table: Top panel 9000 x 1500 mm Internal coolant supply Condition: very good About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization

Didar Part Number 2605710001 NSN 12-A01-7491 Original Part Number 0010989720 - 0000985320 In-Pipe Water Pressure 4.5 – 8 bar Out of Pipe Air Pressure 2.6 – 4 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 220 °C Amount of Water in the Pipe 7 Lt. Amount of Air Outside the Pipe 25 Lt.