centerless grinding used for sale

Tablebelt grinding machine Höfer Format: 2.50 x 1.20 m Engine: 4 kW L x W x H: 3.2 x 1.6 x 1.7m Weight approx. 680 kg The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Saacke Universal Tool Grinding Machine - with partial apperat - with cylindrical loop device - with collet chuck - with many grinding wheels Center height: 125mm, Center width: 600mm, Speed: 3300/ 5400/min, Grinding length: 500mm, Table dimensions: 835x145mm, Grinding wheel dimensions: 175x20mm - with coolant devices Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with f ...

Ref.Nr 00682 Designation of the machine grinding machine / calibration machine Manufacturer Ferrari & Cigarini s.r.i. Model Calibratrice Built in 2012 Current Use To Grind Flow Surface or reduce the height of the workpiece 67.9 kW 400 V- 50 Hz 3 + 6 Bar 4700 kg Delivery date by appointment

Heat treatment oven 1150 0.8x0.8x1.5m t max 1150 C possible various size ovens Öfen für die Wärmebehandlung Metalle einfache Härtesysteme Härterei-Zubehör gienanth Glühöfen Umluftöfen zum Glühen, Anlassen Salzbadöfen Schutzgasöfen Nitrieröfen und Plasmanitrieröfen Mehrzweckkammer-ofenanlagen kontinuierliche Ofenanlagen Vakuumprozesse Vakuumhärten Vakuumglühen, -anlassen, Nitrieren Vakuumlöten Metal Injection Moulding Induktionserwärmung Öfen für die Kunststofftechnik zum Trocken, Tempern, Polymerisieren, Einbrennen usw.; Ausführung als Kammeröfen, Haubenöfen, Herdwagenöfen, Schachtöfen; Herdwagen-Schmiedeöfen Umluftöfen Kammerofenlinien Nitrieröfen Plasmanitrieröfen Vakuumprozesse Schmelzöfen Trocknen Tempern Laboröfen Ersatzteile Öfen Kammeröfen Herd wagenöfen schoenheider Herdwagenöfen zirlguss Glühen Härten Tempern Umformen Vorw ...

Specifications Bore grinding range: 5 - 100 mm Greatest Workpiece Depth: 150 mm Largest external machining diameter: 200 mm Largest swing diameter over the table: 310 mm Height workpiece spindle over the floor: 1150 mm Workpiece spindle speeds NC ? programmable: 0-3000 U/min Table ranges: Z-Axis: 300 mm X-Axis: 1050 mm Table speed infinitely adjustable. Z-Axis: 0-30 m/min X-Axis: 0-90 m/min Starting speed infinitely adjustable: 0.01 - 10 mm/min Start depending on the course: 0.0005 -0.1 mm Workpiece spindle drilling: ? 45 mm Receiving bore of the workpiece spindle: ? 62 mm Workpiece Spindle Flange Diameter: ? 220 mm Workpiece spindle positioning C-Axis Boring Grinding Spindle Stick: ? 120 mm Diamond-Training roller: ? 310 mm Connection power: Approx. 40 kW Weight of the machine: Approx. 7000 kg

No. 4959: 1 gebr. Universal cylindrical grinding machine Fabr. STÖCKEL, type RSU 100 NC-T, Bauj. 2010 with internal grinding device Arb.-Ber.: approx. 300 x 1000 mm, drive power: 4 / 1 kW accessories: Electronic handwheel Coolant device with magnetic separator documentation Other: External grinding spindle Discs- 400 x 50 / 250 x 30 mm 4 kW / max. 1400 min-1 Inner grinding spindle 1 kW / max. 1400 min-1 pivoting range: - Table: -6° / +10° - Grinding spindle stick 180° - Workpiece spindle stick +-90° Space requirement approx. 5 x 3 x 2.2 m Transport dimension approx. 6 LM Weight approx. 5,000 kg

KELLENBERGER UR 175-1000 Yes it is a machine that we are using in Exact. We replace it because a new Studer will arrive next week and we have no more space in the company. The machine works very well and has just been overhauled by us, replacing many electrical and mechanical parts. KELLENBERGER UR 175-1000 Hardinge

Specifications Bore grinding range: 5 - 100 mm Greatest Workpiece Depth: 150 mm Largest external machining diameter: 200 mm Largest swing diameter over the table: 310 mm Height workpiece spindle over the floor: 1150 mm Workpiece spindle speeds NC ? programmable: 0-3000 U/min Table ranges: Z-Axis: 300 mm X-Axis: 1050 mm Table speed infinitely adjustable. Z-Axis: 0-30 m/min X-Axis: 0-90 m/min Feed speed infinitely adjustable: 0.01 - 10 mm/min Feed depending on the course: 0.0005 -0.1 mm Workpiece spindle drilling: ? 45 mm Receiving bore of the workpiece spindle: ? 62 mm Workpiece Spindle Flange Diameter: ? 220 mm Workpiece spindle positioning C-Axis Boring Grinding Spindle Stick: ? 120 mm Diamond-Training roller: ? 310 mm Connection power: Approx. 40 kW Weight of the machine: Approx. 7000 kg

NC machine table (X-axis) Travel speed: 0.1 - 30 m/min Travel range: 800mm Tip height: -K version .200 mm grindable workpiece ?: 10 - 250 mm Center width (max. workpiece length): 800 mm NC divider (A axis) possible divisions: 1-999 Accuracy: ?3 angular seconds Workpiece centering by centering tip: Version K MK3 Max. Speed: 80 min-1 NC grinding slide (Z-axis) Feed step: 0.001 mm Input fineness: 0.001 mm Travel speed: max. 2 m/min Travel: 335 mm NC shift axis (transverse movement of the grinding wheel Y-axis) Travel: ? 70 mm Travel speed: max. 1m/min Input fineness: 0.001 mm NC dressing device (B, U and W axis) Working area of the setter: 120 mm x 120 mm Numerically controlled axes: 3 Feed speeds: U-axis: 0-2500 mm/min W-axis: 0 - 2500 mm/min B-axis: 0 - 100 min-1 Step fineness: U-axis: 0.0005 mm W-axis: 0.0005 mm B-axis: 0.025? Grinding spindles (data are based on a maximum cutting speed  ...

NC machine table (X-axis) Travel speed: 0.1 - 30 m/min Travel range: 800mm Tip height: -K version .200 mm grindable workpiece ?: 10 - 250 mm Center width (max. workpiece length): 800 mm NC divider (A axis) possible divisions: 1-999 Accuracy: ?3 angular seconds Workpiece centering by centering tip: Version K MK3 Max. Speed: 80 min-1 NC grinding slide (Z-axis) Feed step: 0.001 mm Input fineness: 0.001 mm Travel speed: max. 2 m/min Travel: 335 mm NC shift axis (transverse movement of the grinding wheel Y-axis) Travel: ? 70 mm Travel speed: max. 1m/min Input fineness: 0.001 mm NC dressing device (B, U and W axis) Working area of the setter: 120 mm x 120 mm Numerically controlled axes: 3 Feed speeds: U-axis: 0-2500 mm/min W-axis: 0 - 2500 mm/min B-axis: 0 - 100 min-1 Step fineness: U-axis: 0.0005 mm W-axis: 0.0005 mm B-axis: 0.025? Grinding spindles (data are based on a maximum cutting speed  ...

Working range Diameter of the legs: 350 mm Rotation diameter: 360 mm X-trajectory: 725 mm Z-trajectory: 547 mm Y-trajectory: 307 mm Main spindle Spindle flange in accordance with DIN 55026: size 8 Spinning bearings - ? front: 120 mm Maximum speed: 6000 rpm Main drive AC motor 40% ID: kW 45 Maximum power: 58 kW Full power from spindle speed: 480 rpm Moment 40% ID: 480 Nm Maximum moment: 620 Nm Transport drive High speed X/Y/Z: 45/45/30 m/min Transport force in X/Y/Z: 5,5/11/11 KN Ball roller spindle in X/Y/Z: 40 mm Revolver star Intake cylinder shaft DIN 69880: 4 gang Shaft ? 40 mm Grinding spindle 1: HSK C63, U/min 9.000, kW 19 Grinding spindle 2: HSK C32, U/min 42,000, kW 7.5 hydr. Grinding spindle: U/min 32,000, kW 0.9 Electrical equipment Operating voltage: 400 V Control voltage ? DC: 24 V Control voltage ? AC: 230 V Frequency ? 50 Hz Sizes and weights Length: 5060 mm Width: 1960 mm H ...

Stock No. : G15949v Machine type : Centering bore grinding machine Make : Technica Type : ZSM 510-810 Year of construction: 1988 specifications Workpiece clamping range (through..) 4 - 220 mm Workpiece length 50 - 1100 mm Workpiece weight approx. 120 kg Centering hole angle 30° Centering bore cone 2 - 60 mm Grinding spindle diameter 32 mm Depending on the abrasive, speeds of 13,000 to 45,000 rpm. Grinding spindle motor 0.25 KW Grinding head adjustment max. 160 mm Fine delivery max. 1 handwheel revolution 1 mm 1 tick mark 0.01 mm Weight approx. 460 kg Dimensions approx. 1.3 x 1.3 x 1.95 m 21/33.5/45/50 m/min Remarks / Accessories: incl. suction, etc.

Smallest / largest hole diameter 2 / 50 mm Material diameter 32 / 150 mm Workpiece length 50 - 1100 mm Spindle speed range 13,000 - 45,000 rpm

CATALOG NUMBER 6145 TECHNICAL DATA - max workpiece width 1100mm - max workpiece height 140mm 3 aggregates: 1) grooved rubber roller for 15kW calibration 2) grooved rubber roller for 11kW calibration 3) grooved rubber roller for 11kW calibration in advance: - metal skid roller - rubber skid roller - aggregate - 2 rubber rollers, sliding - aggregate - 2 rubber skid rollers - aggregate - rubber skid roller from down: - feeding table 3600x1000mm - feed speed adjustable on the inverter 0.25kW - pulling tape - 3 rubber rollers, sliding, leading out - oscillation of pneumatic strips on photocells - blowing off the tapes - electric table lifting - 0.75kW motor lifting - smooth regulation of the feed speed - 2.2kW feed motor - with a vacum pump - 4kW pump motor - diameter of the extraction port 110mm, 80mm - working pressure 6-8bar - diameter of the extraction port 3 ...

Inv. Num. : 5457 Type: UB 63/2000 Producer: HOL-MONTA Created: 2001 Parameters: Control system: Kavalír Maximum grinding length: 2000 mm Grinding diameter: 630 mm Tip stroke: 375 mm Total power requirement: 41 kW

Specifications Bore grinding range: 5 - 100 mm Greatest Workpiece Depth: 150 mm Largest external machining diameter: 200 mm Largest swing diameter over the table: 310 mm Height workpiece spindle over the floor: 1150 mm Workpiece spindle speeds NC ? programmable: 0-3000 U/min Table ranges: Z-Axis: 300 mm X-Axis: 1050 mm Table speed infinitely adjustable. Z-Axis: 0-30 m/min X-Axis: 0-90 m/min Starting speed infinitely adjustable: 0.01 - 10 mm/min Start depending on the course: 0.0005 -0.1 mm Workpiece spindle drilling: ? 45 mm Receiving bore of the workpiece spindle: ? 62 mm Workpiece Spindle Flange Diameter: ? 220 mm Workpiece spindle positioning C-Axis Boring Grinding Spindle Stick: ? 120 mm Diamond-Training roller: ? 310 mm Connection power: Approx. 40 kW Weight of the machine: Approx. 7000 kg

Specifications Bore grinding range: 5-100 mm Maximum workpiece depth: 150 mm Largest outer diameterofthe working:200 mm Largest swivel diameter above the table: 310 mm Height of workpiece spindle above ground: 1150 mm Workpiece spindle speeds NC ? programmable: 0-3000 rpm Table: Z-axis: 300 mm X-axis: 1050 mm Table speed infinitely adjustable: Z-axis: 0-30 m/min X-axis: 0-90 m/min Delivery speed infinitely variable: 0.01 - 10 mm/min Delivery depending on stroke: 0.0005 -0.1 mm Workpiece spindle drilling: ? 45 mm Mounting hole of the workpiece spindle: ? 62 mm Workpiece spindle flange diameter: ? 220 mm Workpiece spindle positioning C-axis Diamond target roller: ? 310 mm Connected value of the machine: approx. 40 kW Machine weight : approx. 7000 kg

specifications: - Load capacity positioning base approx. 750 kg - Flatplate diameter 500 mm - max. workpiece diameter 1600 mm - Height turntable with horizontal position approx. 750mm - Turntable with right,- + left run - Axis of rotation turntable endless 360 ° - Rotation time per revolution 12.5 sec. - Pan left + right - Swivel axis rotation angle 180 ° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot button for turntable + swivel arm - hydr. Clamping bolt for clamping the workpiece in the middle of the turntable - Clamping stroke / clamping distance of the clamping bolt 32 mm - Clamping force pressing / pulling 80 / 48.9 kN - Clamping cylinder female thread M 27 x 40 - Positioning control SIEMENS - Operation manually or via control - Space required approx. W 1500 x D 2800 x H 1100 mm - Weight approx. 2500 kg - separa ...

Specifications Bore grinding range: 5-100 mm Maximum workpiece depth: 150 mm Largest outer diameterofthe working:200 mm Largest swivel diameter above the table: 310 mm Height of workpiece spindle above ground: 1150 mm Workpiece spindle speeds NC ? programmable: 0-3000 rpm Table: Z-axis: 300 mm X-axis: 1050 mm Table speed infinitely adjustable: Z-axis: 0-30 m/min X-axis: 0-90 m/min Delivery speed infinitely variable: 0.01 - 10 mm/min Delivery depending on stroke: 0.0005 -0.1 mm Workpiece spindle drilling: ? 45 mm Mounting hole of the workpiece spindle: ? 62 mm Workpiece spindle flange diameter: ? 220 mm Workpiece spindle positioning C-axis Diamond target roller: ? 310 mm Connected value of the machine: approx. 40 kW Machine weight : approx. 7000 kg

specifications: - maximum grinding length 360 mm - maximum grinding width 155 mm - maximum installation height 280 mm - Grinding wheel stroke approx. 240mm - Clamping area 400 x 160 mm - Magnetic clamping plate 300 x 150 mm - Grinding wheel dimensions approx. 200 x 80 x 78 mm - Grinding wheel speed 2800 rpm - Swivel range of the grinding arm approx. 180 ° - manual swivel arm clamping via clamping lever - Wet loop fitting - Drive 400 V / 3 kW - Space required approx. W 850 x H 1700 x D 950 mm - Weight approx. 550 kg

Grinding spindle to Hauser coordinate grinding machines. 2 electric spindles with mounting shaft 3mm and 1 compressed air grinding spindle for receiving shaft 3mm. All spindles are tested for function.

5 grinding wheels diameter 780-800mm price for all 5 together

Technical Details Machine Model: WS 450 Year of Manufacture: 1959 Year CSH began operation: 1986 Dimensions Space required: 12 x 5 m. Distance between centers: 5m (196 in.) Dia. Min. working dia. with new stone: 50 mm. (2 in.) Max. Max. working dia. with new stone: 900 mm. (35 in.) Max. allowable weight for the working plate: 14.000 kg. Stone Dimensions: 750 x 80 x 305 mm. Speeds: 350 ̴700 Rpm Drive Head Spindle Speed: 6 - 18 Rpm 16 - 48 Rpm Longitudinal Carriage Feeds Feeds: Range 1: 40 - 400 mm/min. Range 2: 265 - 2650 mm/min Rapid traverse: 2650 mm/min Cutting Feed Rate Control for Grinding Rapid traverse: 175/350 mm/min Fine cutting adjustment: 1 graduation Cooling Devices Liquid capacity in the tank: Approx. 3586 liters

Very well preserved crankshaft grinding machine RTM 260. Machine was newly scraped, spindles of eccentric adjustment replaced. Lots of accessories, 10 grinding wheels, user manual, balancing jack, tape filter system, etc.

Code 0736 Description hydraulic surface grinding machine Make ORION ( HAHN & KOLB ) Model 308 Serial No. 5128 Year 1978 Tablesize 1520 x 300 mm Table grinding size L x B x H 800 x 350 x 500 mm Magnetical plate size L x B 800 x 300 mm Speed table movement 2 - 30 m/min. Rapide vertical movement 0,4 m/min Max. distance table – centre grinding wheel 640 mm Max Grindingstone diameter x Wide x Taper 300 x 50 x Ø 76 mm Spindel power 5,5 and 7,5 kW Spindel speed 1440 and 2880 rpm Weight 3500 kgs Motor power 5,5 / 7,5 kW – 380 Volt Accessoiries Elec. Magneticplate 800 x 300 mm Coolant Condition Machine is in good condition

Code 5976 Description Hydr. Surface grinding machine Make DANOBAT Type RT – 1200 Machine No. 565 Manufacturing date 1989 ( 1990 in use ) Table size 1400 x 700 mm Grinding dimensions L x W x H 1200 x 750 ( 800 ) x 800 mm Magnetic plate size L x W 1000 x 600 mm Table speed movement 1 - 25 m/min. Max. distance table surface – centre grinding wheel 1000 mm Speeds cross 0,1 - 5 m/min. Vertical movement 0,005 – 0,05 mm Spindle rotation 1500 rpm Spindle power 7,5 kW Grinding wheel size Ø 400 x 50 ( 100 ) x Ø 127 mm Weight 8.500 kgs Total power 12 kW – 380 Volt Accessoiries Electro magnetic plate 1000 x 600 mm from Tecnomagnete Coolant Pendel control Condition Machine is in good condition

Code 4925 Description Surface grinding machine Make ELB Model OPTIMAL 1 VA II Serial No. 180730982 Year 1982 Tablesize 900 x 250 mm Table grinding size L x B x H 600 x 300 x 250 mm Magnetical plate size L x B 500 x 250 mm Speed table movement 1 – 25 m/min. Rapide vertical movement 0,15 m/min Max. distance table – centre grinding wheel 500 mm Grinding stone dim. Stone x Wide x Taper 300 x 50 x Ø 75 mm Spindel power 3,7 and 4,5 kW Spindel speed 1400 and 2800 rpm Weight 3500 kgs Motor power 3,7 and 4,5 kW – 380 Volt Accessoiries Elec. Magneticplate 500 x 250 mm Coolant with paperfilter 2 x DRO Grinding stones, etc. Condition Machine is in good condition

Code 61047 Description Hydr. Surface grinding machine Make ALPA Model RT 1000 Serial No. 53377 Year 1985 Tablesize 1200 x 300 mm Table grinding size L x B x H 1000 x 350 x 400 mm Base size L x B 1000 x 300 mm Speed table movement 3 – 40 m/min. Rapide vertical movement 0,15 m/min Max. distance table – centre grinding wheel 600 mm Grinding stone diam. Stone x Wide x Taper Ø 400 x 50 x 127 mm Spindel power 8,8 kW Spindel speed 1460 rpm Weight 3000 kgs Motor power 8,8 kW – 380 Volt Accessoiries Magneticplate 1000 x 300 mm Coolant Grinding stones, etc. Condition Machine is in normal condition

Code 61062 Description Hydr. Surface grinding machine Make DANOBAT Type RTS - 1600 Machine No. 16 220 Manufacturing date 1975 Table size 1800 x 550 mm Grinding dimensions L x W x H 1600 x 600 x 650 mm Magnetic plate size L x W 1600 x 550 mm Table speed movement 1 - 25 m/min. Max. distance table surface – centre grinding wheel 750 mm Speeds cross 0,1 - 5 m/min. Vertical movement 0,005 – 0,05 mm Spindle rotation 1500 rpm Spindle power 15 kW Grinding wheel size Ø 400 x 50 ( 100 ) x Ø 127 mm Weight 10.000 kgs Total power 20 kW – 380 Volt Accessoiries Electro magnetic plate 1600 x 550 mm from Tecnomagnete Coolant Vertical grinding spindel Condition Machine is in good condition

Code 61063 Description Surface grinding machine Make ABA Model FFU 2000/60 Serial No. 208 125 Control Abamatic 3 Year 1986 Tablesize 2510 x 500 mm Grinding surface L x B x H 2000 x 600 x 700 mm Magnetical plate size L x B 2000 x 500 mm Speed table movement 3 – 30 m/min. Max. distance table – centre grinding wheel 900 mm Grinding stone dim. Stone x Wide x Taper Ø 400 x 50 x Ø 127 mm Spindel power 26 kW Spindel speed 1600 - 3000 rpm Motor power 26 kW – 380 Volt Total electr.com. 34 kW Total space L x W x H 7000 x 3500 x 2650 mm Weight 10500 kgs Accessoiries Elec. Magneticplate 2000 x 500 mm Coolant with paperfilter Digital readout Grinding stones, etc. Condition Machine is in good condition

Gantry type grinding machine Make: Hiatachi Seiki Modell: 9GA-NRAA Table: 2500 x 1200 mm Max. Table travel: 2000 mm Capacity: 1500 x 900 x 500 mm Control: Fanuc 15 MA Year: 1995

Code 71164 Description Universal Hydraulic Cylindrical Grinder Make SHIGIYA SEIKI Model GU – 27.100 H Serial No. 10222 Year 1978 Grinding length, max. 1000 mm Grinding diameter, max. 265 mm Centre height 135 mm Max. Weight workpiece 130 kg Table tilting angle - 3° till + 7° Table speeds 0,05 – 7 m/min Diam. Grinding wheel 350 mm Width Grinding wheel, max. 25 – 50 mm Motorpower grindingwheel 3,7 kW Speeds workpieceholder steples from 17 – 250 rpm Total power 9,3 kVA 380 Volts Machine size L x W x H 4,0 x 1,8 x 1,6 meter Weight 3200 kg Accessories Coolant, books, electric cabinet,etc. Condition Machine is in good condition

Code 81199 Description Hydr. Surface grinding machine Make DANOBAT Type RT – 1200 Machine No. 504 Manufacturing date 1987 Table size 1400 x 450 mm Grinding dimensions L x W x H 1200 x 600 x 450 mm Magnetic plate size L x W 1200 x 450 mm Table speed movement 1 - 30 m/min. Max. distance table surface – centre grinding wheel 675 mm Speeds cross 0,1 - 5 m/min. Vertical movement 0,005 – 0,05 mm Spindle rotation 1200 rpm Spindle power 7,5 kW Grinding wheel size Ø 450 x 50 ( 100 ) x Ø 127 mm Weight 6000 kgs Size of machine 3250 x 1850 x 2600 mm Total power 19 kW – 380 Volt Accessoiries Electro magnetic plate 1200 x 450 mm from Tecnomagnete Coolant Pendel control Condition Machine is in normal condition

Code 9602 DESCRIPTION Vertical JIG Grinder Make HAUSER Modell 3 SMO Serial No. 257 Machine No. 1519-2564 Table surface 600 x 320 mm Table movement longitude (X) 400 mm Table movement cross (Y) 250 mm Max. grinding diameter Ø 190 mm Column-Spindle 300 mm Max. height under spindle 500 mm Vertical movement spindle 90 mm Vertical movement grindinghead 500 mm Max. speeds grindingspindle up to 80.000 omw./min Weight 2000 kg Total power 6,6 kW – 380 Volts Accessories Grinding spindles, etc. Condition Machine is in good condition

Code 101237 Description Universal Cylindrical Grinder Make WMW Heckert Model SA 5 U x 630 Serial No. 3115 Year 1981 Grinding length, max. 630 mm Grinding diameter, max. 275 mm Centerheight 140 mm Max. Weight workpiece 125 kg Table tilting angle - 5° till + 11,5° Diam. Grinding wheel 500 mm Width Grinding wheel, max. 100 mm Motorpower grindingwheel 5,5 kW Speeds workpieceholder 31,5 – 710 rpm Total power 12,5 kVA 380 Volts Machine size L x W x H 3,9 x 2,3 x 1,6 meter Weight 4800 kg Accessories coolant with magnetic some tooling Condition Machine is in good condition

Code 171305 Description CNC surface grinding machine Make DANOBAT Model PSG - 1000 Serial No. 30102 A Control Fanuc 210i - M Year 2001 Tablesize 1000 x 500 mm Grinding surface L x W x H 1000 x 600 x 450 mm Long ( X axes ) 1150 mm Cross ( Z axes ) 500 mm Speed table movement 1 – 30 m/min. Max. distance table – centre grinding wheel 650 mm Max. workpiece weigth 1500 kg Max. table load 1500 kg Magnetical plate size L x W 1000 x 500 mm Grinding stone dim. Stone x Wide x Taper Ø 400 x 100 x Ø 127 mm Spindel power 7,5 kW Spindel speed 1500 rpm Motor power 7,5 kW – 380 Volt Total electr.com. 20 kW Total space L x W x H 3950 x 3150 x 2550 mm Weight 5500 kgs Accessoiries Elec. Magneticplate 1000 x 500 mm Coolant with paperfilter Digital readout Grinding stones, etc. Condition Machine is in g ...

Drill grinding machine: Make: Michael Deckel Modell: SO S/N: 22822

Small 4-side brushing/grinding machine for small parts. Minimum part length 250 m ! SPECIFICATIONS: Feed belt speed: 3-20 m/min. Spindle diameter: ø 40 mm Length of horizontal spindle shaft: 150 mm Length of vertical spindle shaft: 100 mm Maximum brush diameter: ø 200 mm Spindle speed as standard: 1000 ot/min (possibility of infinitely variable control) Power of the main motors as standard: 4x1.1 kW Power of the motor for the feed of the conveyor belt: 0.55 kW Diameter of the suction nozzle: 2 x ø 120 mm Maximum material height: 100 mm Maximum material width: 150 mm Minimum length: 250 mm (must be advised) Weight of the machine: 450 kg Compact machine with quick adjustment and optional parameters. KuSING has been manufacturing woodworking machines since 1991. In the field of 4-sided brushes, we offer a wide range of machines for every application. Parameter chang ...

internal diameter: 20/300 mm grinding depth: 250 mm swing diameter: 250 mm workpiece spindle - bore: 45 mm workpiece spindle swivable +/-: 25 ° taper setting angle of the workpiece column: 50 ° work piece spindle speed: 42 - 400 U/min grinding spindle speed: 10.000 U/min table speed -stepless-: 0,1 - 8 m/min grinding spindle drive: 4 kW power capacity: 10 kW weight of the machine ca.: 4.500 kg dimensions of the machine ca.: m : : : : : Internal grinding Æ, min./max. 20 / 300 mm Grinding depth 500 mm Table stroke, min./max. 5 / 800 mm Height of centres above table 250 mm Swing Æ in the table recess 600 mm Workspindle bore 62 / 45 mm Swivability of workpiece wheelhead 25 ° Max. taper angle which can be ground 50 ° Infeed, per stroke 0.0025 - 0.5 mm Worksp ...

thread dia.: 254 mm grinding length: 350 mm thread pitch: 51 mm Control: SIEMENS S 8 total power requirement: 12 kW weight of the machine ca.: 5000 kg dimensions of the machine ca.: m B A H M Ü L L E R Automatic Internal Thread Grinding Machine Model IPE 12 i.S. Year 1985 Serial No. 103174 _______________________________________________________ workpiece Ø, max. 300 mm workpiece length, approx. 350 mm height of centers (WP spindle/grinding spindle) 300 mm table stroke approx. 450 mm thread diameter ground max. approx. 254 mm thread diameter ground min. approx. 25,4 mm thread length ground in one setting max. 250 mm Lead range, max. 51 mm Lead angle max. 10 ° Total electrical load, approx. 12 kW - 380 V - 50 Hz Weight, approx. 5,000 kg  ...

grinding height: 60 mm grinding width: 120 mm grinding wheel diameter: 600 mm grinding length: mm workpiece height: 60 mm total power requirement: 50 kW weight of the machine ca.: 7000 kg dimensions of the machine ca.: m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 ______________________________________________________________________ ________ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 1 ...

workpiece diameter: 600 mm workpiece weight: 400 kg workpiece height: 300 mm total power requirement: 35 kW weight of the machine ca.: 4500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rotary table diameter: 1000 mm grinding height: 500 mm grinding head - power requirement: 15/5,5 kW total power requirement: 30 kW weight of the machine ca.: 18 t dimensions of the machine ca.: m S I E L E M A N N (Germany) Hydraulic Rotary Table Internal and Face Grinding Machine with two grinding heads and with horizontal workpiece clamping Model RFsB 100 Year 1969 / fully reconditioned by the manufacturer in 1990 _______________________________________________________ Max workpiece Ø 1,000 mm Max. height of workpiece, approx. 400 mm Mounting height under grinding spindles approx. 500 mm Grindable Bore Ø, approx. 50 – 900 mm Max. Workpiece weight approx.. 900 kg Distance between Table bore and column 1.150 mm Table Ø / Face plate Ø, approx.  ...

Center bore grinding machine make KLEIN type ZSS 1Machine -No: 15-76-369 built in 1977Technical specifications:Center height: 160 mmDistance between centers: 1000 mmlargest workpiece diameter: 160 mmlargest center hole diameter: 35 mmsmallest center hole diameter: 1.0 mmTaper angle: 60 - 90 °smallest / largest mounted point diameter: 12/40 mmStroke of the grinding spindle: 30 mmDressing spindle stroke: 50 mmMotor speed: 2800 rpm.Drive power: 0.075 kWDimensions L x W x H approx .: 600 x 700 x 1900 mmWeight approx .: 240 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

grinding diameter: 250,350,450 mm grinding length: 1000 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±8 ° longitudinal feed of the table: 1300 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 4,2 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Foto von Kürzlich gelieferten  ...

grinding diameter: 350 mm grinding length: mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Basis: Kellenberger Kel-Varia UR175-1000 Schleifkopf UR mit T1-T2-T3 Grundausstattung: -T1 500mm Schleifscheibendurchmesser -T2 400mm Schleifscheibendurchmesser -B-Achse hochauflösend -Marposs Messeinrichtung zur Werkzeugvermessung -Werkzeugvermessung -Aktive Längspositionierung -GAP an T1 berührungslos -Reitstock mit Handrückzug -Werkstückspindelstock MK5 mit Kurzkegelaufmahme DIN 55026 -Innenschleifeinrichtung riemengetrieben Optionen gegen Aufpreis: - neuer Werkstückspinde ...

grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø : ±8 ° longitudinal feed of the table: 700 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannung kg cross travel: max. 270 mm : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 5,48 x 2,0 m Foto von bereits gelieferten Maschine (600mm Spitzenweite) mit gegebenenfalls anderen Optionen. Geometrisch überholt und neu lackiert. -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my Optionen: -Dre ...

Cylindrical grinding machine make RIBON type RUR-E-1000Year 1984Tip distance: 1000 mmTop height above table: 160 mmGr. grinding diameter: 320 mmhöchstzul. Weight between the tips: 70 kghöchstzul. Weight flying: 20 kgNormal size of the grinding wheel: 355 (410) x32x127 mmhöchstzul. Width of the grinding wheel: 60 mmDrm. the workpiece spindle bore: 24 mmMorse cone of the workpiece spindle: No. 4Morse cone of the tailstock: No. 3Morse taper of the red. Sleeve of the workpiece spindle head: no. 3Rotation speed of the grinding spindle: 1700/2100 rpm.Rotation speed of the workpiece spindle: 35-310 rpm.Table feed: 190-300-380-470-600-940 mm / p.Mautomatic grinding wheel feed p. Table turn: 0.005-0.01-0.015 mmGrinding wheel feed by hand lever: 0.005 mmGrinding wheel feed at each graduation of the handwheel: 0.005 mmMicro fine feed per line: 0.001 mmTilting of the table for taper grinding betw ...

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Kellenberger Kel-Varia Baureihe mit Kelco 90 Steuerung. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -Neue moderne CNC-RUNDSCHLEIFMASCHINEN-Steuerung -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Standardausstattung ...