centerless grinding used for sale

Stock number: U2293-2 Used carbon steel grinding/refining mill by Pallmann (Germany) model PR8. Mill has bolted rotor with diameter 795 mm and stator with diameter 800 mm. Belt driven by el. motor 100 kW, 1480 rpm, 380 V, 50 hz. Manual adjustment of gap between milling plates. Mill has mounted 5 nozzles for feeding gas or liquid inside the milling chamber. Front door bolted with central feeding inlet through feeding chute. Bottom discharge.

Surface grinders - horizontal ELB-SCHLIFF SWBE 10 PLC Second-hand machine Mint Control cabinet, motors, wiring, control new Hydraulic new, trim, loop length: 1000 mm Grinding width: 500 (600) mm Workpiece height: 600 mm Table size: 1000 x 550 mm Grinding wheel dimensions: 400 x 100 mm Grinding spindle motor: 11 kW Table speed: 2-30 m / min Grinding wheel speed: 5-35 m / sn Total power: 18 kW Machine weight approx.: 5,5 t Space requirement approx.: 3.5 x 2.5 x 2.5 m General outrun 2019 with 12 month warranty Paper machine Levelling feet Installation included Instruction includes

Gr. Grinding length: 620 mm gr. Grinding width: 250 mm table size: 200 x 620 mm grinding wheel dimensions: 200 x 220 x 51 mm Electr. Supply: 380 V, 1/1.8 kW space: 1650 x 1450 x 1800 mm weight: 1350 kg

Loop scope Length x width 1200 x 600 mm Distance table spindle Center max. 700 mm Wheel Max (D x W x d) 400 x 80 x 127 mm Grinding head and drive Y-axis (vertical movement) Vertical grinding head 550 mm Distance from spindle Center table 150... 700 mm Machine table and drive x axis (longitudinal movement) Magnetic clamping plate size 1200 x 600 mm Table longitudinal travel, max. 1300 mm Table burden, including magnetic clamping plate, Max 800 kg Stand and drive Z-axis (transversal movement) Stand transverse stroke, 560 mm Space requirements, power consumption, weight Space, with coolant system 4410 x 2600 mm (W x D), Machine height 2550 mm Weight of the machine (incl. control cabinet), CA. 5400 kg

Mikrofinishingmaschine, microfinishing machine, used gebrauchtTyp: MA 3/1000Hersteller: Thielenhaus machine factory WuppertalSteuerung: manually, konv. maximum part size / max. worksize: d = 155 mmMax. 310 part length / max work.length: mmGenauigkeit / precision: 0.001 mmLeistung / load: 12.4 kW, 380/400 ~ specification: stock finish. grinding wheels Floor finishing tools including Machine application: high-precision surface grinding of piston pin

Stock number 1105-02617 Machine type flat grinding machine Make Elf Type OPTIMALLY 4250 NC-K Built in 1993 Control type NC Storage warehouse Country of origin Germany Delivery time immediately Exhibition Hall, ver free freight basis Technical details Grinding length 450 mm Grinding width 250 mm Workpiece height 375 mm Table length 800 mm Table width 250 mm maximum work-piece weight 400 kg Autom. Cross feed adjustable 3-50 mm / stroke Vertical delivery, 1 Division 0.001 - 0.06 mm Grinding wheel diameter 300 mm Grinding wheel width 50 mm Grinding wheel diameter 36 mm Voltage 380 V Grinding spindle motor 3.7 / 4.7 kW Total power demand 9 kW Machine weight approx. 2.6 t Space requirement of approx. 2800 X 2500 2300 mm Additional information automatic delivery -Electro magnetic clamping plate with straight fine pole pitch, dimens ...

Technical details TYP/Model: Formmaster 6/30 Table surface: 600 x 300 mm Table adjustment lengthwise: 700 mm Cross: 300 mm Grinding area: 600 x 300 mm Grinding height max: 300 mm Magnet: 600 x 320 mm Grinding slices: 220 x 25 x 52 mm Automatic vertical delivery: Yes Connection: 8 kW Accessories: Auto. Vertical delivery; Full enclosure, magnet, Wet grinding; Depulsion for grinding discs Condition: Good Addition: The machine can be visited in our warehouse, not currently under electricity! Weight: 2.6 t Dimension machine about: 2,700 x 2,200 x 2,500 mm Subject to change and error in the technical details and details.

Precision flat grinding machine Manufacturer: COSMOS Model: Earth 1050 NC Built: New factory Grinding length: 1000 mm Grinding width: 500 mm Grinding height: 400 mm Electric magnetic release plate 1000 x 500 mm Single fitters at the table firmly assembled for straight judting with compensation Programble display 4.7 " Unseated grinding spindle drive Universal paper tape filter

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Grinding-wheel diameter: 100 mm Longitudinal way of table: 100 mm Transversal way of the table: 120 mm Vertical: 50 mm Tête de rectifiage vertical: Collet attachment: 20 W horizontal: +/-45 ° axe rotatif table tournante: 360 ° Workpiece chuck speeds: 60-800 rpm Grinding spindle speeds: stepless from: 2000 rpm up to: 8000 rpm Voltage 50 Hz 3x: 400 Volt Grinding spindle motor: 0.37 kW Machine´s weight about: 460 kg Overall dimensions machine: Length: 950 mm Width: 750 mm Height: 1350 mm Various accessories: Drive to dividing attachment Dust extraction Lamp Optical microscope Digital readout number of axis:: 2 Microscopeholder Microscopeholder from top Work piece spindle head Digital readout number of axis:: 2 Projector:

Type SAXW 63/3000 Producer WMW Meuselwitz Year of manufacture 1979 Parameters 63mm, 3000mm Location Praha CZ Swing 750 mm Distance between centres 3000 mm Max. weight of workpiece 6000 kg Machine suitable for modernisation

CNC Universal circular grinding machine SHU321C Brand new, never used. Control FANUC Series Oi-TC 2-axes machine. Diameter of grinding workpiece -external 8-320 mm -internal 30-250 mm Center height 165 mm Maximum grinding length -external grinding (center grinding) 710 mm -internal grinding (in chuck) 135 mm Maximum angle of table rotation -clockwise 3 degrees -counterclockwise 11 degrees Grinding wheel -dimensions for external grinding 450x50x203 mm -peripheral speed 35 m / sec Rotation angle of the grinding wheel ± 90 degrees Front saddle -30 degrees clockwise rotation angle -90 degrees rotation angle -speed range for external grinding 30-400 rpm Back saddle -size of the fixed center Morse N4 -Pinolite stroke 35 mm Cross feeding range 0.1- 4000 mm/min Range of longitudinal feeds 0.05-8 m / min Minimum cross feed 0.0005 mm Main motor power kW 5.5

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data grinding diameter: 1.0 - 12.7 mm Grinding length: 0 -75 mm Helix angle: 0 - 89 ° Tool lenght: 30 - 200 mm Axial motion: Crosswise: 87 mm Longitudinal: 80 mm Vertical: 38 mm Collet attachment: 15 W Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 1800 kg Overall dimensions machine: Length: 1830 mm Width: 2040 mm Height: 2100 mm Various accessories: Automatic loading: 200 - 500 pce Loading roboter Description: Chargement automatique des forets ou fraises Plateaux de chargement de 200 à 500 pièces

TUGRA ROHRAUSSCHLEIFER TYP TT 170 -Capaciteit 40-170 mm -Met 10 roll -Traploos adjustable snelheid -Hoekinstelling -Documentatie -400V DUTCHMACH Metal processing machines ENSCHEDE-NIEDERLANDE (3 km from the German border)

Internal Grinding Machine JOTES SOJ 10 Internal diameter100 mm Grinding depth 160 mm Swing diameter 300/450 mm Max. outer diameter 300/450 mm Weight of the machine ca.:2900 kg Almost unused.

Table belt grinding machine Bürkle L x W x H: 3.5 x 1.7 x 1.8 m Built in 1963 Weight approx. 650 kg The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Tip width/grinding length: 1000/1075 mm Gr. Grinding diameter: 250 mm Table swivel: +/- 8° Gr. Table longitudinal movement: 1210 mm Workpiece spindle stick swivel: 0 - 90° Spindle bore/cone: 38 mm/MK 5 Grinding spindle stick easily swivelling Hydr. Quick adjustment approx.: 50 mm Grinding wheel dimensions: 400 x 50 x 127 mm 2 grinding wheel speeds due to V-belt step disc Drive power: 3 kW Space requirement: 2900 x 2200 x 1750 mm Weight: approx. 3.5 t

Drill diameter: 2 - 13 mm Tip angle: 90° - 140° Speed: 4800 rpm Connection: 230 V Engine power: 0.18 kW Weight, approx.: 11 kg Dimensions, approx.: 320 x 180 x 190 cm Characteristics: - Ideal for grinding HSS/hard metal spiral drills - Safe operation due to forced grinding - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including sharpening device to reduce feed force - Device for back grinding of the drill cuttings to reduce the friction between the drill and the workpiece - Rotor with precision ball bearings Delivery: - Grinding wheel CBN - 11 collet pliers ER 20, 3 - 13 mm - collet holder ER 20

Drill diameter: 13 - 32 mm Tip angle: 90° - 140° Speed: 4800 rpm Connection: 230 V Engine power: 0.25 kW Weight, approx.: 28 kg Dimensions, approx.: 490 x 250 x 260 mm Characteristics: - Ideal for grinding HSS/hard metal spiral drills - Safe operation due to forced grinding - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including sharpening device to reduce feed force - Device for back grinding of the drill cuttings to reduce the friction between the drill and the workpiece - Rotor with precision ball bearings Delivery: - Grinding wheel CBN - 20 collet pliers ER 40, 13 - 32 mm - collet holder ER 40 Optional extension, at extra cost: - collet set 5pcs. 8.0 / 9.0 / 10.0 /11.0 /12.0 mm

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 200 mm Distance between centres: 280 mm Max. grinding diameter: 200 mm Grinding-wheel diameter: 125 mm Taper in spindle:: 5 MT grinding spindle: Longitudinal way of table: 150 mm Transversal way of the table: 140 mm Slewing range of grinding head: horizontal: 90 ° vertical: 90 ° Grinding spindle speeds: number (steps): 3 from: 4500 rpm up to: 7100 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 3 HP Machine´s weight about: 560 kg Overall dimensions machine: Length: 620 mm Width: 500 mm Height: 1500 mm Various accessories: Set of collets Set of grinding wheel arbors 6-jaw chuck diameter Cylindrical grinding attachment Set of grinding wheels Lamp Tool cabinet

Grinding length 500 mm Grinding width 250 mm Workpiece height 375 mm max. table load 350 kg Table longitudinal movement 525 mm Table feed 2-28 m/min Total power requirement 4.5 kW Machine weight approx.1900 kg Control NC Height: approx.2.60 m Width: approx. 2.10 m Depth: approx. 2.00 m Total weight with cooling lubricant container: approx. 2.3 t.

Figure shows precision flat grinding machine: FSM 2550 AH Table size: 300 x 600 mm Installation height: 500 mm Max table load: 300 kg Engine power: 4.6 kW Connection: 400 V Dimensions: 2300 x 1790 x 2200 mm Weight, approx.: 2000 kg Equipment and scope of delivery: - All castings, such as machine stand, table, etc. made of MEEHANITE® quality casting - Automatic cross and longitudinal feed - Permanent lubrication - Automatic cross-stroke device - Rear splash protection - Grinding wheel - Grinding wheel flange - Pulling device - Balancing mandrel - Balancing scales - Dressing diamond - Machine light - Nivilier elements - Operating tool - Operating instructions - CE Special equipment of our storage machine: - Electric magnetic clamping plate 300 x 600 mm (fine pole) - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Automatic verti ...

HM saw blade grinding machine Vollmer CHD 250 Suitable for automatic grinding of HM circular saw blades on the chest and back in a tension. All known tooth geometries (flat, alternating, trapezoidal tooth, etc.) can be sanded automatically and in a drain. 2019 technically overhauled and repainted Technical data: Saw blade diameter: 80 - 840 mm Bore diameter: 10 - 220 mm Sheet thickness up to: 14 mm Tooth pitch: 8 - 120 mm Chip angle: - 35° to + 40° Free angle: 5° to 45° Inclined grinding tooth back: 45° Inclined tooth brush: 30° Grinding wheel chest: 200 x 32 mm Grinding wheel back: 125 x 32 mm Dimensions W x D x H: 2295 x 1743 x 2050 mm Weight approx.: approx. 2000 kg Connection value: 400 V / 50 Hz / 5.6 kVA

Suitable for automatic grinding of HM circular saeblades on chest and jerks in one clamping. All known tooth geometries (flat, alternating, trapezoidal tooth, etc.) can be sanded automatically and in one drain. Condition: Completely rebuilt, diameter extended, repainted. Up to the diameter of 1600 mm ! â?¢ Full cladding â?¢ Set-up for central cooling agent connection â?¢ Device for central suction â?¢ Automatic central lubrication â?¢ Grinding wheel holder â?¢ 2 magnetic saege leaf holders â?¢ Centering rings, - huelsen â?¢ Saegeleaf thickness: up to 14 mm

Saw blade grinding machine with partial gearbox Model Schmidt Tempo G 400 For grinding circular saw blades from 20 to 400 mm â?¢ Automatic grinding wheel delivery via electronic preselection; max. removal 4 mm, removal sequence after tooth number preselection in 0.02 mm increments â?¢ Free grinding after entered saw blade revolutions â?¢ Central lubrication â?¢ 1 pc. saw blade holder: approx. 185 mm, bolt 16 mm with mech. Force-tensioning nut; Centering rings 16 x 22, 27, 32, 40 and 50 mm â?¢ 1 pc. saw blade holder: approx. 80 mm, bolt 16 mm â?¢ 10 pcs. grinding wheels of 200 mm, various widths

YOM 1987. Worked not more than 10 years, one shift Grinding length 3000 mm Grinding width 1700 mm Workpiece height 1600 mm Distance between columns 1860 mm Grinding heads- 2 Table surface 3230x1600 mm Number of slots of the table 10 pcs Permissible table load with evenly distributed load 5000kg/m Weight of work-piece 15t Table travel speed 1-40m/min

DATA ON THE MACHINE Machine type: Grinding bracket / double grinding bracket Manufacturer: METABO Model: 7230 Condition: very good (used) Price 450 â?¬ FP net plus 19% VAT Location Warstein , Germany Reference M-MET-1119 Description We offer you a grinding buck from the manufacturer METABO. Grinding wheel diameter max. 300 Weight ink. Base approx. 250kg Storage as new. Our offer is aimed at persons who are covered within the meaning of the Trade Code in accordance with Section 14 GewO. The offer is subject to change, intermediate sale reserved. Please provide your full contact details in order to receive an offer with our Terms and Conditions of Payment. Mistakes in the descriptions and offers are reserved!

Ger RHC1500 Universal Rectifier. Indoor head. Distance between points: 1500mm. Maximum part diameter: 355mm. Point height: 180mm. Tooth diameter: 400mm. Power: 7.5hp. Weight: 4500Kgs.

M 1105-02800 Machine type Cylindrical Grinding Machine - Universal Make ZIERSCH & BALTRUSCH Type URS 751 Built in 1982 Control type conventional Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight base from stock Technical details Grinding diameter 270 mm Grinding length 1000 mm Tip height 135 mm Total power requirement 7.5 kW Machine weight approx. 2.8 t Room requirement approx. 3 X 2.7 X 2.5 m Information ZIERSCH & BALTRUSCH Hydraulic Universal ROUND SCHLEIFMASCHINR Type URS 751 1982 built _________________________________________________ Tip height 135 mm Tip width/grinding length 1000 mm Tip width approx. 1100 mm Grinding wheel size: Through. x Width 400 x 50 mm Grinding spindle speeds (belts) 1,800 2,200 rpm Delivery path/rapid path 0.001 / 30 mm Grinding wheels delivery 0.0 ...

Pass width mm: 1300 02 Engines KW: 1 + 1 02 Brushes Brush diameter mm: 300 Vacuum table Control cabinet KW: 8.5

Grinding units Grinding belt length mm: 8000 Grinding width mm: 120 Feed max: 2200 m/min Manipulation unit Max machining range mm: 2100x650x400 Total connection kW: 7.2

Grinding width mm: 1350 Pass-through height mm: 3 - 160 Feed max m/min: 2 - 20 - Inverter KW 3 01 Grinding unit: Grinding belt length mm: 1380 x 3250 - 24 SH - 15 KW Blow-off device Vacuum table Scotch Brite x mm 200 Machine Control: Viet "IPC 15" Touch Screen Centering device Weight Kg: 3970

Grinding width mm: 1350 Pass-through height mm: 3 - 160 Feed max m/min: 2 - 20 - Inverter KW 4 01 Grinding unit: Grinding belt length mm: 1380 x 3250 - 15 KW (INV) 01 Orbital grinding unit "Spinbrush" - KW 4 (INV) 01 Grinding unit: Grinding belt length mm: 1380 x 3250 - 15 KW (INV) Machine Control: Viet "IPC 15" Touch Screen Blow-off device 1 Blow-off device 2 Vacuum table Scotch Brite Weight KG: 7200

Length: 2900 mm

Belt conveyor "Italmeccanica" mm: 1000 Working width mm: 1600 2 brushes for lateral processing in the entrance area Longitudinal machining brushes Horizontal brush unit Horizontal brush unit Brush roller (transversal) Weight Kg: 2000 Total connection KW: 15.5

A) Total grinding units: 02 - longitudinal - bottom Grinding units total: 02 - transverse - top - bottom B) Total grinding units: 02 oscillating - right C) Total grinding units: 02 oscillating - links D) Orbital grinding unit total: 02 Complete loading

4 Belt grinding unit 2 grinding brushes Carpet length mm: 5500 Carpet width mm: 400 (extendable) Weight Kg: 800

TECHNICAL DATA: Required space mm: 830 x 860 x H 1150 01 Vertical brush KW 0,37 Motion: right - left Weight Kg: 250

Sell a pot grinding machine from Ahtena FRC Rolo Camurri technical data: 2850 rpm 2.2 Kw 50Hz; 380V; 5.3A Permanent magnet / clamping magnet 150mm250mm Distance under edge grinding stone to magnetic top edge approx. 170mm with coolant pump otherwise technically good condition

Working Length: 3100 or 4100

Pallet with unused grinding wheels. Were sorted out during a warehouse cleanup -DGS 5A 120-J16 VR 2AX diameter 250 /14/51 12piece -DGS 5A 46- K14 VG 1AX diameter 250 /16/51 13piece -5A 46 K14 VG 1AX diameter 225/20/51 2 piece -2A 46 K10 VAX diameter 250/20/51 2 piece -2A 46-M14-VG1AX diameter 300/3 /51 3 piece -5A 46.K14-UG1AX diameter 300/50/76 3piece -2A 80-L12-D9AX diameter 250/13/51 6piece -5A 120 J16 R2AX diameter 250/13/51 3piece -Narrow discs -80 M5 diameter 120/1.5/30 5piece -80 M5 diameter 150/1.5/30 5piece -80 M5-diameter 150/2 /30 6piece Haerte N -80 M5 diameter 150/2.5/30 4piece Haerte N Total approx. 62pcs

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 65 mm Distance between centres: 250 mm Table length: 470 mm Table width: 175 mm Max. grinding diameter: 130 mm Longitudinal way of table: 260 mm Transversal way of the table: 70 mm Vertical adjustment of the table: 50 mm Table swivels: 360 ° Grinding spindle speeds: number (steps): 2 from: 1400 rpm up to: 2800 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 0.5 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 1000 mm Width: 600 mm Height: 1400 mm

Machine details 1105-02942 Machine type Flat Grinding Machine - Horizontal Make Sit Type R4 CA Built 1981 Control type Conventional Location France Origin Germany Delivery Right away Freight base EX WORK Price On request Technical details Grinding length 450 mm Grinding width 180 mm Workpiece height 300 mm Total performance requirements 9 kW Information Grinding length max. 500 mm Table stroke maximum 600 mm Grinding width max. 180 mm Table size 600 x 300 mm Working height under grinding wheel 500 mm Grinding head Vertical path 300 mm Vertical delivery 0.001 - 0.06 mm/stroke Grinding slide adjustment across 200 mm Grinding wheel size 400 x 150 x 305 mm Grinding wheel speed stfl. 47 - 970 rpm Table load.600 kg Table lifting speed max. 30 m/min. Grinding spindle drive 12 kW Total drive approx. 20 kW - 380 V - 50 Hz Weight approx. 2,00 ...

Stable production machine, peak width 1000mm Peak height 180mm Grinding wheel diameter 500 mm ready for use. We specialize in the revision of grinding machines, and offer service, maintenance, repair, conversion and control modernization.

Sell a small grinding machine suitable for grinding small areas, or tools grinding rotary steels, shock chisels, etc. Table clamping surface 560120mm Table stroke Handheld manually approx. 300mm Distance grinding wheel (bottom edge) top table approx. 270mm Cross stroke manually approx. 100mm Table is designed with a turntable Grinding head is also for turning Pulling device Abawerke

Sell a tool grinding machine especially for grinding stools or similar. One side is equipped with a chuck that can be adjusted in all directions. The whole thing is on a cross support Dimensions 16001000'1500mm High Clamping range chuck 4040mm Grinding wheels diameter 175mm50mm and 320mm50mm Voltage probably 110V

Spiral drill grinding machine Offer number: 20063 Make: SCHANBACHER Type: S 3-50 Machine Number: 92-2083 Built: 1992 Technical data: - Easy to use - Grinding process by means of gearmotor - Spiral drill dimensions 3 - 50 mm - Angle 90 - 140° - adjustable free angle - Grinding motor 400 V / 0.25 kW - Gearmotor for swivel movement 400 V / 0.12 kW - Grinding wheel dimensions - 175 x 22 x 20/90 x 20 mm - Space requirement approx. W 810 x D 570 x H 1260 mm - Weight approx. 120 kg - with - Clamping device - Presetting device

Steel grinding machine Offer number: 20064 Make: REMA Type: DS 12 ST Machine Number: 108267 Built: 1988 Technical data: - Grinding wheel diameter approx. 125 mm - 2 disc speeds 1450 / 2200 rpm - Right, - Left-hand run - tilting fixed support table ATF 340 x 150 mm - Support table -5° to +15° tiltable - Lighting - Drive 400 V / 0.65 / 0.9 kW - Working height 1000 mm - Space requirement approx. W 850 x H 1150 x D 550 mm - Weight approx. 120 kg

The machine is 2x Available! Steel grinding machine Make Rema Type DS12/ST with suction

Automatic oscillating curve grinding machine Grinding width 300 mm Grinding height from 3 - 100 mm Feed continuously from 25 - 25 m/min Feed motor 0.55 KW Drive motor 7.5 kW Grinding belt 320 x 2000 mm

Contact belt grinding machine - Width: 100cm - Depth: 50cm - Height: 200cm - 1 kW - 1400 rpm Good condition fully functional can be visited and tried out on site. Shipping abroad. Bjb9nyul9y Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time at the telephone number below. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.